Merge tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Here is the bulk of pin control changes for the v4.2 series: Quite a
  lot of new SoC subdrivers and two new main drivers this time, apart
  from that business as usual.

  Details:

  Core functionality:
   - Enable exclusive pin ownership: it is possible to flag a pin
     controller so that GPIO and other functions cannot use a single pin
     simultaneously.

  New drivers:
   - NXP LPC18xx System Control Unit pin controller
   - Imagination Pistachio SoC pin controller

  New subdrivers:
   - Freescale i.MX7d SoC
   - Intel Sunrisepoint-H PCH
   - Renesas PFC R8A7793
   - Renesas PFC R8A7794
   - Mediatek MT6397, MT8127
   - SiRF Atlas 7
   - Allwinner A33
   - Qualcomm MSM8660
   - Marvell Armada 395
   - Rockchip RK3368

  Cleanups:
   - A big cleanup of the Marvell MVEBU driver rectifying it to
     correspond to reality
   - Drop platform device probing from the SH PFC driver, we are now a
     DT only shop for SuperH
   - Drop obsolte multi-platform check for SH PFC
   - Various janitorial: constification, grammar etc

  Improvements:
   - The AT91 GPIO portions now supports the set_multiple() feature
   - Split out SPI pins on the Xilinx Zynq
   - Support DTs without specific function nodes in the i.MX driver"

* tag 'pinctrl-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: rockchip: add support for the rk3368
  pinctrl: rockchip: generalize perpin driver-strength setting
  pinctrl: sh-pfc: r8a7794: add SDHI pin groups
  pinctrl: sh-pfc: r8a7794: add MMCIF pin groups
  pinctrl: sh-pfc: add R8A7794 PFC support
  pinctrl: make pinctrl_register() return proper error code
  pinctrl: mvebu: armada-39x: add support for Armada 395 variant
  pinctrl: mvebu: armada-39x: add missing SATA functions
  pinctrl: mvebu: armada-39x: add missing PCIe functions
  pinctrl: mvebu: armada-38x: add ptp functions
  pinctrl: mvebu: armada-38x: add ua1 functions
  pinctrl: mvebu: armada-38x: add nand functions
  pinctrl: mvebu: armada-38x: add sata functions
  pinctrl: mvebu: armada-xp: add dram functions
  pinctrl: mvebu: armada-xp: add nand rb function
  pinctrl: mvebu: armada-xp: add spi1 function
  pinctrl: mvebu: armada-39x: normalize ref clock naming
  pinctrl: mvebu: armada-xp: rename spi to spi0
  pinctrl: mvebu: armada-370: align spi1 clock pin naming
  pinctrl: mvebu: armada-370: align VDD cpu-pd pin naming with datasheet
  ...

16 files changed, 696 insertions, 147 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
new file mode 100644
index 000000000000..d7e123fc90b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
@@ -0,0 +1,50 @@
+CSR SiRFatlas7 GPIO controller bindings
+
+Required properties:
+- compatible	: "sirf,atlas7-gpio"
+- reg		: Address range of the pinctrl registers
+- interrupts	: Interrupts used by every GPIO group
+- gpio-banks	: How many gpio banks on this controller
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
+Example:
+
+	gpio_0: gpio_mediam@17040000 {
+		compatible = "sirf,atlas7-gpio";
+		reg = <0x17040000 0x1000>;
+		interrupts = <0 13 0>, <0 14 0>;
+
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		interrupt-controller;
+
+		gpio-banks = <2>;
+		gpio-ranges = <&pinctrl 0 0 0>,
+				<&pinctrl 32 0 0>;
+		gpio-ranges-group-names = "lvds_gpio_grp",
+					"uart_nand_gpio_grp";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio_1 15 0>;
+			...
+		};
+
+		led2 {
+			gpios = <&gpio_2 34 0>;
+			...
+		};
+	};
+
+Please refer to gpio.txt in this directory for details of the common
+gpio properties used by devices.
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index fdd8046e650a..9462ab7ddd1f 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -16,6 +16,8 @@ Required properties:
   "allwinner,sun7i-a20-pinctrl"
   "allwinner,sun8i-a23-pinctrl"
   "allwinner,sun8i-a23-r-pinctrl"
+  "allwinner,sun8i-a33-pinctrl"
+
 - reg: Should contain the register physical address and length for the
   pin controller.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
new file mode 100644
index 000000000000..08a4a32c8eb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -0,0 +1,217 @@
+Imagination Technologies Pistachio SoC pin controllers
+======================================================
+
+The pin controllers on Pistachio are a combined GPIO controller, (GPIO)
+interrupt controller, and pinmux + pinconf device. The system ("east") pin
+controller on Pistachio has 99 pins, 90 of which are MFIOs which can be
+configured as GPIOs. The 90 GPIOs are divided into 6 banks of up to 16 GPIOs
+each. The GPIO banks are represented as sub-nodes of the pad controller node.
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+Required properties for pin controller node:
+--------------------------------------------
+ - compatible: "img,pistachio-system-pinctrl".
+ - reg: Address range of the pinctrl registers.
+
+Required properties for GPIO bank sub-nodes:
+--------------------------------------------
+ - interrupts: Interrupt line for the GPIO bank.
+ - gpio-controller: Indicates the device is a GPIO controller.
+ - #gpio-cells: Must be two. The first cell is the GPIO pin number and the
+   second cell indicates the polarity. See <dt-bindings/gpio/gpio.h> for
+   a list of possible values.
+ - interrupt-controller: Indicates the device is an interrupt controller.
+ - #interrupt-cells: Must be two. The first cell is the GPIO pin number and
+   the second cell encodes the interrupt flags. See
+   <dt-bindings/interrupt-controller/irq.h> for a list of valid flags.
+
+Note that the N GPIO bank sub-nodes *must* be named gpio0, gpio1, ... gpioN-1.
+
+Required properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - pins: List of pins to which the configuration applies. See below for a
+   list of possible pins.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins. This is not applicable for
+   non-MFIO pins. See below for a list of valid functions for each pin.
+ - bias-high-impedance: Enable high-impedance mode.
+ - bias-pull-up: Enable weak pull-up.
+ - bias-pull-down: Enable weak pull-down.
+ - bias-bus-hold: Enable bus-keeper mode.
+ - drive-strength: Drive strength in mA. Supported values: 2, 4, 8, 12.
+ - input-schmitt-enable: Enable Schmitt trigger.
+ - input-schmitt-disable: Disable Schmitt trigger.
+ - slew-rate: Slew rate control. 0 for slow, 1 for fast.
+
+Pin		Functions
+---		---------
+mfio0		spim1
+mfio1		spim1, spim0, uart1
+mfio2		spim1, spim0, uart1
+mfio3		spim1
+mfio4		spim1
+mfio5		spim1
+mfio6		spim1
+mfio7		spim1
+mfio8		spim0
+mfio9		spim0
+mfio10		spim0
+mfio11		spis
+mfio12		spis
+mfio13		spis
+mfio14		spis
+mfio15		sdhost, mips_trace_clk, mips_trace_data
+mfio16		sdhost, mips_trace_dint, mips_trace_data
+mfio17		sdhost, mips_trace_trigout, mips_trace_data
+mfio18		sdhost, mips_trace_trigin, mips_trace_data
+mfio19		sdhost, mips_trace_dm, mips_trace_data
+mfio20		sdhost, mips_trace_probe_n, mips_trace_data
+mfio21		sdhost, mips_trace_data
+mfio22		sdhost, mips_trace_data
+mfio23		sdhost
+mfio24		sdhost
+mfio25		sdhost
+mfio26		sdhost
+mfio27		sdhost
+mfio28		i2c0, spim0
+mfio29		i2c0, spim0
+mfio30		i2c1, spim0
+mfio31		i2c1, spim1
+mfio32		i2c2
+mfio33		i2c2
+mfio34		i2c3
+mfio35		i2c3
+mfio36		i2s_out, audio_clk_in
+mfio37		i2s_out, debug_raw_cca_ind
+mfio38		i2s_out, debug_ed_sec20_cca_ind
+mfio39		i2s_out, debug_ed_sec40_cca_ind
+mfio40		i2s_out, debug_agc_done_0
+mfio41		i2s_out, debug_agc_done_1
+mfio42		i2s_out, debug_ed_cca_ind
+mfio43		i2s_out, debug_s2l_done
+mfio44		i2s_out
+mfio45		i2s_dac_clk, audio_sync
+mfio46		audio_trigger
+mfio47		i2s_in
+mfio48		i2s_in
+mfio49		i2s_in
+mfio50		i2s_in
+mfio51		i2s_in
+mfio52		i2s_in
+mfio53		i2s_in
+mfio54		i2s_in, spdif_in
+mfio55		uart0, spim0, spim1
+mfio56		uart0, spim0, spim1
+mfio57		uart0, spim0, spim1
+mfio58		uart0, spim1
+mfio59		uart1
+mfio60		uart1
+mfio61		spdif_out
+mfio62		spdif_in
+mfio63		eth, mips_trace_clk, mips_trace_data
+mfio64		eth, mips_trace_dint, mips_trace_data
+mfio65		eth, mips_trace_trigout, mips_trace_data
+mfio66		eth, mips_trace_trigin, mips_trace_data
+mfio67		eth, mips_trace_dm, mips_trace_data
+mfio68		eth, mips_trace_probe_n, mips_trace_data
+mfio69		eth, mips_trace_data
+mfio70		eth, mips_trace_data
+mfio71		eth
+mfio72		ir
+mfio73		pwmpdm, mips_trace_clk, sram_debug
+mfio74		pwmpdm, mips_trace_dint, sram_debug
+mfio75		pwmpdm, mips_trace_trigout, rom_debug
+mfio76		pwmpdm, mips_trace_trigin, rom_debug
+mfio77		mdc_debug, mips_trace_dm, rpu_debug
+mfio78		mdc_debug, mips_trace_probe_n, rpu_debug
+mfio79		ddr_debug, mips_trace_data, mips_debug
+mfio80		ddr_debug, mips_trace_data, mips_debug
+mfio81		dreq0, mips_trace_data, eth_debug
+mfio82		dreq1, mips_trace_data, eth_debug
+mfio83		mips_pll_lock, mips_trace_data, usb_debug
+mfio84		sys_pll_lock, mips_trace_data, usb_debug
+mfio85		wifi_pll_lock, mips_trace_data, sdhost_debug
+mfio86		bt_pll_lock, mips_trace_data, sdhost_debug
+mfio87		rpu_v_pll_lock, dreq2, socif_debug
+mfio88		rpu_l_pll_lock, dreq3, socif_debug
+mfio89		audio_pll_lock, dreq4, dreq5
+tck
+trstn
+tdi
+tms
+tdo
+jtag_comply
+safe_mode
+por_disable
+resetn
+
+Example:
+--------
+pinctrl@18101C00 {
+	compatible = "img,pistachio-system-pinctrl";
+	reg = <0x18101C00 0x400>;
+
+	gpio0: gpio0 {
+		interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	...
+
+	gpio5: gpio5 {
+		interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	...
+
+	uart0_xfer: uart0-xfer {
+		uart0-rxd {
+			pins = "mfio55";
+			function = "uart0";
+		};
+		uart0-txd {
+			pins = "mfio56";
+			function = "uart0";
+		};
+	};
+
+	uart0_rts_cts: uart0-rts-cts {
+		uart0-rts {
+			  pins = "mfio57";
+			  function = "uart0";
+		};
+		uart0-cts {
+			  pins = "mfio58";
+			  function = "uart0";
+		};
+	};
+};
+
+uart@... {
+	...
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_rts_cts>;
+	...
+};
+
+usb_vbus: fixed-regulator {
+	...
+	gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	...
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
index adda2a8d1d52..add7c38ec7d8 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -17,10 +17,10 @@ mpp0          0        gpio, uart0(rxd)
 mpp1          1        gpo, uart0(txd)
 mpp2          2        gpio, i2c0(sck), uart0(txd)
 mpp3          3        gpio, i2c0(sda), uart0(rxd)
-mpp4          4        gpio, cpu_pd(vdd)
-mpp5          5        gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk)
+mpp4          4        gpio, vdd(cpu-pd)
+mpp5          5        gpo, ge0(txclkout), uart1(txd), spi1(sck), audio(mclk)
 mpp6          6        gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
-mpp7          7        gpo, ge0(txd1), tdm(tdx), audio(lrclk)
+mpp7          7        gpo, ge0(txd1), tdm(dtx), audio(lrclk)
 mpp8          8        gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
 mpp9          9        gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
 mpp10         10       gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
@@ -52,8 +52,8 @@ mpp30         30       gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
 mpp31         31       gpio, tclk, ge0(txerr)
 mpp32         32       gpio, spi0(cs0)
 mpp33         33       gpio, dev(bootcs), spi0(cs0)
-mpp34         34       gpo, dev(wen0), spi0(mosi)
-mpp35         35       gpo, dev(oen), spi0(sck)
+mpp34         34       gpo, dev(we0), spi0(mosi)
+mpp35         35       gpo, dev(oe), spi0(sck)
 mpp36         36       gpo, dev(a1), spi0(miso)
 mpp37         37       gpo, dev(a0), sata0(prsnt)
 mpp38         38       gpio, dev(ready), uart1(cts), uart0(cts)
@@ -86,11 +86,11 @@ mpp57         57       gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
 mpp58         58       gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
                        uart0(rts)
 mpp59         59       gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
-mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out),
+mpp60         60       gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rstout),
                        audio(sdi)
-mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
+mpp61         61       gpo, dev(we1), uart1(txd), audio(lrclk)
 mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
                        audio(mclk), uart0(cts)
 mpp63         63       gpo, spi0(sck), tclk
-mpp64         64       gpio, spi0(miso), spi0-1(cs1)
-mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
+mpp64         64       gpio, spi0(miso), spi0(cs1)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
index 7de0cda4a379..06e5bb0367f5 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
@@ -15,24 +15,24 @@ name          pins     functions
 ================================================================================
 mpp0          0        gpio, dev(ad2), spi0(cs1), spi1(cs1)
 mpp1          1        gpio, dev(ad3), spi0(mosi), spi1(mosi)
-mpp2          2        gpio, dev(ad4), ptp(eventreq), led(c0), audio(sdi)
-mpp3          3        gpio, dev(ad5), ptp(triggen), led(p3), audio(mclk)
+mpp2          2        gpio, dev(ad4), ptp(evreq), led(c0), audio(sdi)
+mpp3          3        gpio, dev(ad5), ptp(trig), led(p3), audio(mclk)
 mpp4          4        gpio, dev(ad6), spi0(miso), spi1(miso)
 mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
-mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
+mpp6          6        gpio, dev(ad0), led(p1), audio(lrclk)
 mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
 mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
-mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
-mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
 mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
 mpp12        12        gpio, dev(a1), audio(bclk)
-mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)
+mpp13        13        gpio, dev(ready), pcie0(rstout), pcie1(rstout)
 mpp14        14        gpio, i2c0(sda), uart1(txd)
 mpp15        15        gpio, i2c0(sck), uart1(rxd)
 mpp16        16        gpio, uart0(txd)
 mpp17        17        gpio, uart0(rxd)
-mpp18        18        gpio, tdm(intn)
-mpp19        19        gpio, tdm(rstn)
+mpp18        18        gpio, tdm(int)
+mpp19        19        gpio, tdm(rst)
 mpp20        20        gpio, tdm(pclk)
 mpp21        21        gpio, tdm(fsync)
 mpp22        22        gpio, tdm(drx)
@@ -45,12 +45,12 @@ mpp28        28        gpio, led(p3), ge1(txctl), sd(clk)
 mpp29        29        gpio, pcie1(clkreq), ge1(rxclk), sd(d3)
 mpp30        30        gpio, ge1(txd0), spi1(cs0)
 mpp31        31        gpio, ge1(txd1), spi1(mosi)
-mpp32        32        gpio, ge1(txd2), spi1(sck), ptp(triggen)
+mpp32        32        gpio, ge1(txd2), spi1(sck), ptp(trig)
 mpp33        33        gpio, ge1(txd3), spi1(miso)
 mpp34        34        gpio, ge1(txclkout), spi1(sck)
 mpp35        35        gpio, ge1(rxctl), spi1(cs1), spi0(cs2)
 mpp36        36        gpio, pcie0(clkreq)
-mpp37        37        gpio, pcie0(clkreq), tdm(intn), ge(mdc)
+mpp37        37        gpio, pcie0(clkreq), tdm(int), ge(mdc)
 mpp38        38        gpio, pcie1(clkreq), ge(mdio)
 mpp39        39        gpio, ref(clkout)
 mpp40        40        gpio, uart1(txd)
@@ -58,25 +58,25 @@ mpp41        41        gpio, uart1(rxd)
 mpp42        42        gpio, spi1(cs2), led(c0)
 mpp43        43        gpio, sata0(prsnt), dram(vttctrl)
 mpp44        44        gpio, sata0(prsnt)
-mpp45        45        gpio, spi0(cs2), pcie0(rstoutn)
-mpp46        46        gpio, led(p0), ge0(txd0), ge1(txd0)
+mpp45        45        gpio, spi0(cs2), pcie0(rstout)
+mpp46        46        gpio, led(p0), ge0(txd0), ge1(txd0), dev(we1)
 mpp47        47        gpio, led(p1), ge0(txd1), ge1(txd1)
 mpp48        48        gpio, led(p2), ge0(txd2), ge1(txd2)
 mpp49        49        gpio, led(p3), ge0(txd3), ge1(txd3)
 mpp50        50        gpio, led(c0), ge0(rxd0), ge1(rxd0)
 mpp51        51        gpio, led(c1), ge0(rxd1), ge1(rxd1)
 mpp52        52        gpio, led(c2), ge0(rxd2), ge1(rxd2)
-mpp53        53        gpio, pcie1(rstoutn), ge0(rxd3), ge1(rxd3)
-mpp54        54        gpio, pcie0(rstoutn), ge0(rxctl), ge1(rxctl)
+mpp53        53        gpio, pcie1(rstout), ge0(rxd3), ge1(rxd3)
+mpp54        54        gpio, pcie0(rstout), ge0(rxctl), ge1(rxctl)
 mpp55        55        gpio, ge0(rxclk), ge1(rxclk)
 mpp56        56        gpio, ge0(txclkout), ge1(txclkout)
-mpp57        57        gpio, ge0(txctl), ge1(txctl)
+mpp57        57        gpio, ge0(txctl), ge1(txctl), dev(we0)
 mpp58        58        gpio, led(c0)
 mpp59        59        gpio, led(c1)
 mpp60        60        gpio, uart1(txd), led(c2)
 mpp61        61        gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0)
 mpp62        62        gpio, i2c1(sck), led(p1)
-mpp63        63        gpio, ptp(triggen), led(p2)
+mpp63        63        gpio, ptp(trig), led(p2), dev(burst/last)
 mpp64        64        gpio, dram(vttctrl), led(p3)
 mpp65        65        gpio, sata1(prsnt)
-mpp66        66        gpio, ptp(eventreq), spi1(cs3)
+mpp66        66        gpio, ptp(evreq), spi1(cs3)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
index b17c96849fc9..54ec4c0a0d0e 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
@@ -27,16 +27,16 @@ mpp8          8        gpio, ge0(txd1), dev(ad10)
 mpp9          9        gpio, ge0(txd2), dev(ad11)
 mpp10         10       gpio, ge0(txd3), dev(ad12)
 mpp11         11       gpio, ge0(txctl), dev(ad13)
-mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
-mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
-mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
-mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
-mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
-mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
-mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
-mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
-mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
-mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), dram(vttctrl), spi0(cs3), dev(we1), pcie3(clkreq)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), dram(deccerr), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
+mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt), sata0(prsnt)
+mpp18         18       gpio, ge0(rxerr), ptp(trig), ua1(txd), spi0(cs0)
+mpp19         19       gpio, ge0(col), ptp(evreq), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
+mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs), sata1(prsnt)
 mpp22         22       gpio, spi0(mosi), dev(ad0)
 mpp23         23       gpio, spi0(sck), dev(ad2)
 mpp24         24       gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
@@ -45,36 +45,36 @@ mpp26         26       gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
 mpp27         27       gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2)
 mpp28         28       gpio, ge1(txd0), sd0(clk), dev(ad5)
 mpp29         29       gpio, ge1(txd1), dev(ale0)
-mpp30         30       gpio, ge1(txd2), dev(oen)
+mpp30         30       gpio, ge1(txd2), dev(oe)
 mpp31         31       gpio, ge1(txd3), dev(ale1)
-mpp32         32       gpio, ge1(txctl), dev(wen0)
-mpp33         33       gpio, m(decc_err), dev(ad3)
+mpp32         32       gpio, ge1(txctl), dev(we0)
+mpp33         33       gpio, dram(deccerr), dev(ad3)
 mpp34         34       gpio, dev(ad1)
 mpp35         35       gpio, ref(clk_out1), dev(a1)
-mpp36         36       gpio, ptp(trig_gen), dev(a0)
+mpp36         36       gpio, ptp(trig), dev(a0)
 mpp37         37       gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8)
-mpp38         38       gpio, ptp(event_req), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4)
+mpp38         38       gpio, ptp(evreq), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4)
 mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
 mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
-mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
+mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0)
 mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
-mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
-mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
-mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
-mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
-mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
-mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
-mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
-mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
-mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
-mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
-mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
-mpp57         57       gpio, spi1(sck), sd0(clk)
-mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
-mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+mpp43         43       gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout), ua1(rxd)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout), ua1(txd)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), dram(vttctrl), tdm(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50         50       gpio, pcie0(rstout), tdm(drx), audio(extclk), sd0(cmd)
+mpp51         51       gpio, tdm(dtx), audio(sdo), dram(deccerr), ptp(trig)
+mpp52         52       gpio, pcie0(rstout), tdm(int), audio(sdi), sd0(d6), ptp(clk)
+mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm(rst), audio(bclk), sd0(d7), ptp(evreq)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
+mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0), ua1(rxd)
+mpp56         56       gpio, ua1(rts), ge(mdc), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57         57       gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
 [1]: only available on 88F6820 and 88F6828
 [2]: only available on 88F6828
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
index 5b1a9dc004f4..a40b60f1ca4c 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
@@ -4,8 +4,9 @@ Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
 part and usage.
 
 Required properties:
-- compatible: "marvell,88f6920-pinctrl", "marvell,88f6928-pinctrl"
-  depending on the specific variant of the SoC being used.
+- compatible: "marvell,88f6920-pinctrl", "marvell,88f6925-pinctrl" or
+  "marvell,88f6928-pinctrl" depending on the specific variant of the
+  SoC being used.
 - reg: register specifier of MPP registers
 
 Available mpp pins/groups and functions:
@@ -24,55 +25,60 @@ mpp6	6	gpio, dev(cs3), xsmi(mdio)
 mpp7	7	gpio, dev(ad9), xsmi(mdc)
 mpp8	8	gpio, dev(ad10), ptp(trig)
 mpp9	9	gpio, dev(ad11), ptp(clk)
-mpp10	10	gpio, dev(ad12), ptp(event)
+mpp10	10	gpio, dev(ad12), ptp(evreq)
 mpp11	11	gpio, dev(ad13), led(clk)
 mpp12	12	gpio, pcie0(rstout), dev(ad14), led(stb)
-mpp13	13	gpio, dev(ad15), led(data)
-mpp14	14	gpio, m(vtt), dev(wen1), ua1(txd)
+mpp13	13	gpio, dev(ad15), pcie2(clkreq), led(data)
+mpp14	14	gpio, dram(vttctrl), dev(we1), ua1(txd)
 mpp15	15	gpio, pcie0(rstout), spi0(mosi), i2c1(sck)
-mpp16	16	gpio, m(decc), spi0(miso), i2c1(sda)
-mpp17	17	gpio, ua1(rxd), spi0(sck), smi(mdio)
+mpp16	16	gpio, dram(deccerr), spi0(miso), pcie0(clkreq), i2c1(sda)
+mpp17	17	gpio, ua1(rxd), spi0(sck), sata1(prsnt) [1], sata0(prsnt) [1], smi(mdio)
 mpp18	18	gpio, ua1(txd), spi0(cs0), i2c2(sck)
-mpp19	19	gpio, sata1(present) [1], ua0(cts), ua1(rxd), i2c2(sda)
-mpp20	20	gpio, sata0(present) [1], ua0(rts), ua1(txd), smi(mdc)
-mpp21	21	gpio, spi0(cs1), sata0(present) [1], sd(cmd), dev(bootcs), ge(rxd0)
+mpp19	19	gpio, sata1(prsnt) [1], ua0(cts), ua1(rxd), i2c2(sda)
+mpp20	20	gpio, sata0(prsnt) [1], ua0(rts), ua1(txd), smi(mdc)
+mpp21	21	gpio, spi0(cs1), sata0(prsnt) [1], sd0(cmd), dev(bootcs),
+                sata1(prsnt) [1], ge(rxd0)
 mpp22	22	gpio, spi0(mosi), dev(ad0)
 mpp23	23	gpio, spi0(sck), dev(ad2)
-mpp24	24	gpio, spi0(miso), ua0(cts), ua1(rxd), sd(d4), dev(readyn)
-mpp25	25	gpio, spi0(cs0), ua0(rts), ua1(txd), sd(d5), dev(cs0)
-mpp26	26	gpio, spi0(cs2), i2c1(sck), sd(d6), dev(cs1)
-mpp27	27	gpio, spi0(cs3), i2c1(sda), sd(d7), dev(cs2), ge(txclkout)
-mpp28	28	gpio, sd(clk), dev(ad5), ge(txd0)
+mpp24	24	gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25	25	gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26	26	gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27	27	gpio, spi0(cs3), i2c1(sda), sd0(d7), dev(cs2), ge(txclkout)
+mpp28	28	gpio, sd0(clk), dev(ad5), ge(txd0)
 mpp29	29	gpio, dev(ale0), ge(txd1)
-mpp30	30	gpio, dev(oen), ge(txd2)
+mpp30	30	gpio, dev(oe), ge(txd2)
 mpp31	31	gpio, dev(ale1), ge(txd3)
-mpp32	32	gpio, dev(wen0), ge(txctl)
-mpp33	33	gpio, m(decc), dev(ad3)
+mpp32	32	gpio, dev(we0), ge(txctl)
+mpp33	33	gpio, dram(deccerr), dev(ad3)
 mpp34	34	gpio, dev(ad1)
 mpp35	35	gpio, ref(clk), dev(a1)
 mpp36	36	gpio, dev(a0)
-mpp37	37	gpio, sd(d3), dev(ad8), ge(rxclk)
-mpp38	38	gpio, ref(clk), sd(d0), dev(ad4), ge(rxd1)
-mpp39	39	gpio, i2c1(sck), ua0(cts), sd(d1), dev(a2), ge(rxd2)
-mpp40	40	gpio, i2c1(sda), ua0(rts), sd(d2), dev(ad6), ge(rxd3)
-mpp41	41	gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burstn), nd(rbn0), ge(rxctl)
+mpp37	37	gpio, sd0(d3), dev(ad8), ge(rxclk)
+mpp38	38	gpio, ref(clk), sd0(d0), dev(ad4), ge(rxd1)
+mpp39	39	gpio, i2c1(sck), ua0(cts), sd0(d1), dev(a2), ge(rxd2)
+mpp40	40	gpio, i2c1(sda), ua0(rts), sd0(d2), dev(ad6), ge(rxd3)
+mpp41	41	gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0), ge(rxctl)
 mpp42	42	gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43	43	gpio, pcie0(clkreq), m(vtt), m(decc), spi1(cs2), dev(clkout), nd(rbn1)
-mpp44	44	gpio, sata0(present) [1], sata1(present) [1], led(clk)
+mpp43	43	gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44	44	gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+                sata3(prsnt) [2], led(clk)
 mpp45	45	gpio, ref(clk), pcie0(rstout), ua1(rxd)
 mpp46	46	gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb)
-mpp47	47	gpio, sata0(present) [1], sata1(present) [1], led(data)
-mpp48	48	gpio, sata0(present) [1], m(vtt), tdm(pclk) [1], audio(mclk) [1], sd(d4), pcie0(clkreq), ua1(txd)
-mpp49	49	gpio, tdm(fsync) [1], audio(lrclk) [1], sd(d5), ua2(rxd)
-mpp50	50	gpio, pcie0(rstout), tdm(drx) [1], audio(extclk) [1], sd(cmd), ua2(rxd)
-mpp51	51	gpio, tdm(dtx) [1], audio(sdo) [1], m(decc), ua2(txd)
-mpp52	52	gpio, pcie0(rstout), tdm(intn) [1], audio(sdi) [1], sd(d6), i2c3(sck)
-mpp53	53	gpio, sata1(present) [1], sata0(present) [1], tdm(rstn) [1], audio(bclk) [1], sd(d7), i2c3(sda)
-mpp54	54	gpio, sata0(present) [1], sata1(present) [1], pcie0(rstout), sd(d3), ua3(txd)
-mpp55	55	gpio, ua1(cts), spi1(cs1), sd(d0), ua1(rxd), ua3(rxd)
-mpp56	56	gpio, ua1(rts), m(decc), spi1(mosi), ua1(txd)
-mpp57	57	gpio, spi1(sck), sd(clk), ua1(txd)
-mpp58	58	gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd(d1), ua1(rxd)
-mpp59	59	gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd(d2)
+mpp47	47	gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+                sata3(prsnt) [2], led(data)
+mpp48	48	gpio, sata0(prsnt) [1], dram(vttctrl), tdm(pclk) [2], audio(mclk) [2], sd0(d4), pcie0(clkreq), ua1(txd)
+mpp49	49	gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync) [2],
+                audio(lrclk) [2], sd0(d5), ua2(rxd)
+mpp50	50	gpio, pcie0(rstout), tdm(drx) [2], audio(extclk) [2], sd0(cmd), ua2(rxd)
+mpp51	51	gpio, tdm(dtx) [2], audio(sdo) [2], dram(deccerr), ua2(txd)
+mpp52	52	gpio, pcie0(rstout), tdm(int) [2], audio(sdi) [2], sd0(d6), i2c3(sck)
+mpp53	53	gpio, sata1(prsnt) [1], sata0(prsnt) [1], tdm(rst) [2], audio(bclk) [2], sd0(d7), i2c3(sda)
+mpp54	54	gpio, sata0(prsnt) [1], sata1(prsnt) [1], pcie0(rstout), sd0(d3), ua3(txd)
+mpp55	55	gpio, ua1(cts), spi1(cs1), sd0(d0), ua1(rxd), ua3(rxd)
+mpp56	56	gpio, ua1(rts), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57	57	gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58	58	gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59	59	gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
-[1]: only available on 88F6928
+[1]: only available on 88F6925/88F6928
+[2]: only available on 88F6928
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
index 373dbccd7ab0..76da7222ff92 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -18,7 +18,7 @@ only for more detailed description in this document.
 
 name          pins     functions
 ================================================================================
-mpp0          0        gpio, ge0(txclko), lcd(d0)
+mpp0          0        gpio, ge0(txclkout), lcd(d0)
 mpp1          1        gpio, ge0(txd0), lcd(d1)
 mpp2          2        gpio, ge0(txd1), lcd(d2)
 mpp3          3        gpio, ge0(txd2), lcd(d3)
@@ -30,49 +30,50 @@ mpp8          8        gpio, ge0(rxd2), lcd(d8)
 mpp9          9        gpio, ge0(rxd3), lcd(d9)
 mpp10         10       gpio, ge0(rxctl), lcd(d10)
 mpp11         11       gpio, ge0(rxclk), lcd(d11)
-mpp12         12       gpio, ge0(txd4), ge1(txd0), lcd(d12)
-mpp13         13       gpio, ge0(txd5), ge1(txd1), lcd(d13)
-mpp14         14       gpio, ge0(txd6), ge1(txd2), lcd(d15)
-mpp15         15       gpio, ge0(txd7), ge1(txd3), lcd(d16)
-mpp16         16       gpio, ge0(txd7), ge1(txd3), lcd(d16)
-mpp17         17       gpio, ge0(col), ge1(txctl), lcd(d17)
+mpp12         12       gpio, ge0(txd4), ge1(txclkout), lcd(d12)
+mpp13         13       gpio, ge0(txd5), ge1(txd0), spi1(mosi), lcd(d13)
+mpp14         14       gpio, ge0(txd6), ge1(txd1), spi1(sck), lcd(d15)
+mpp15         15       gpio, ge0(txd7), ge1(txd2), lcd(d16)
+mpp16         16       gpio, ge0(txd7), ge1(txd3), spi1(cs0), lcd(d16)
+mpp17         17       gpio, ge0(col), ge1(txctl), spi1(miso), lcd(d17)
 mpp18         18       gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
 mpp19         19       gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
 mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
-mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
+mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), dram(bat)
 mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
-mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
-mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
-mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
 mpp30         30       gpio, tdm(int1), sd0(clk)
-mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
-mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
-mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
-mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
+mpp33         33       gpio, tdm(int4), sd0(d1), dram(bat), dram(vttctrl)
+mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt), dram(deccerr)
 mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
-mpp36         36       gpio, spi(mosi)
-mpp37         37       gpio, spi(miso)
-mpp38         38       gpio, spi(sck)
-mpp39         39       gpio, spi(cs0)
-mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
-                       pcie(clkreq0)
-mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
-                       pcie(clkreq1)
-mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
-                       vdd(cpu0-pd)
-mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
-                       vdd(cpu2-3-pd){1}
-mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
-                       mem(bat)
-mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
-mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
-mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
-                       ref(clkout)
-mpp48         48       gpio, tclk, dev(burst/last)
+mpp36         36       gpio, spi0(mosi)
+mpp37         37       gpio, spi0(miso)
+mpp38         38       gpio, spi0(sck)
+mpp39         39       gpio, spi0(cs0)
+mpp40         40       gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0),
+                       spi1(cs1)
+mpp41         41       gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+                       pcie(clkreq1), spi1(cs2)
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout),
+                       spi1(cs3)
+mpp44         44       gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2),
+                       dram(bat), spi1(cs4)
+mpp45         45       gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt),
+                       spi1(cs5), dram(vttctrl)
+mpp46         46       gpio, uart3(rts), uart1(rts), spi0(cs6), sata0(prsnt),
+                       spi1(cs6)
+mpp47         47       gpio, uart3(cts), uart1(cts), spi0(cs7), pcie(clkreq3),
+                       ref(clkout), spi1(cs7)
+mpp48         48       gpio, dev(clkout), dev(burst/last), nand(rb)
 
 * Marvell Armada XP (mv78260 and mv78460 only)
 
@@ -84,9 +85,9 @@ mpp51         51       gpio, dev(ad16)
 mpp52         52       gpio, dev(ad17)
 mpp53         53       gpio, dev(ad18)
 mpp54         54       gpio, dev(ad19)
-mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
-mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
-mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp55         55       gpio, dev(ad20)
+mpp56         56       gpio, dev(ad21)
+mpp57         57       gpio, dev(ad22)
 mpp58         58       gpio, dev(ad23)
 mpp59         59       gpio, dev(ad24)
 mpp60         60       gpio, dev(ad25)
@@ -96,6 +97,3 @@ mpp63         63       gpio, dev(ad28)
 mpp64         64       gpio, dev(ad29)
 mpp65         65       gpio, dev(ad30)
 mpp66         66       gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
new file mode 100644
index 000000000000..df0309c57505
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
@@ -0,0 +1,57 @@
+NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
+--------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "nxp,lpc1850-scu"
+- reg			: Address and length of the register set for the device
+- clocks		: Clock specifier (see clock bindings for details)
+
+The lpc1850-scu driver uses the generic pin multiplexing and generic pin
+configuration documented in pinctrl-bindings.txt.
+
+The following generic nodes are supported:
+ - function
+ - pins
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - drive-strength
+ - input-enable
+ - input-disable
+ - input-schmitt-enable
+ - input-schmitt-disable
+ - slew-rate
+
+Not all pins support all properties so either refer to the NXP 1850/4350
+user manual or the pin table in the pinctrl-lpc18xx driver for supported
+pin properties.
+
+Example:
+pinctrl: pinctrl@40086000 {
+	compatible = "nxp,lpc1850-scu";
+	reg = <0x40086000 0x1000>;
+	clocks = <&ccu1 CLK_CPU_SCU>;
+
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		uart0_rx_cfg {
+			pins = "pf_11";
+			function = "uart0";
+			bias-disable;
+			input-enable;
+		};
+
+		uart0_tx_cfg {
+			pins = "pf_10";
+			function = "uart0";
+			bias-disable;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
new file mode 100644
index 000000000000..eecf028ff485
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt
@@ -0,0 +1,109 @@
+CSR SiRFatlas7 pinmux controller
+
+Required properties:
+- compatible	: "sirf,atlas7-ioc"
+- reg		: Address range of the pinctrl registers
+
+For example, pinctrl might have properties like the following:
+	pinctrl: ioc@18880000 {
+			compatible = "sirf,atlas7-ioc";
+			reg = <0x18880000 0x1000>;
+
+			a_ac97_pmx: ac97@0 {
+				ac97 {
+					groups = "audio_ac97_grp";
+					function = "audio_ac97";
+				};
+			};
+
+			...
+
+			sd2_pmx: sd2@0 {
+				sd2 {
+					groups = "sd2_grp0";
+					function = "sd2";
+				};
+			};
+
+			...
+
+
+			sample0_cfg: sample0@0 {
+				sample0 {
+					pins = "ldd_0", "ldd_1";
+					bias-pull-up;
+				};
+			};
+
+			sample1_cfg: sample1@0 {
+				sample1 {
+					pins = "ldd_2", "ldd_3";
+					input-schmitt-enable;
+				};
+			};
+
+			sample2_cfg: sample2@0 {
+				sample2 {
+					groups = "uart4_nopause_grp";
+					bias-pull-down;
+				};
+			};
+
+			sample3_cfg: sample3@0 {
+				sample3 {
+					pins = "ldd_4", "ldd_5";
+					drive-strength = <2>;
+				};
+			};
+	};
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- groups : An array of strings. Each string contains the name of a group.
+- function: A string containing the name of the function to mux to the
+  group.
+
+  Valid values for group and function names can be found from looking at the
+  group and function arrays in driver files:
+  drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+	sd0_pmx: sd0@0 {
+		sd0 {
+			groups = "sd0_grp";
+			function = "sd0";
+		};
+	};
+
+	sd1_pmx0: sd1@0 {
+		sd1 {
+			groups = "sd1_grp0";
+			function = "sd1_m0";
+		};
+	};
+
+	sd1_pmx1: sd1@1 {
+		sd1 {
+			groups = "sd1_grp1";
+			function = "sd1_m1";
+		};
+	};
+
+For a specific board, if it wants to use sd1,
+it can add the following to its board-specific .dts file.
+sd1: sd@0x12340000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pmx0>;
+}
+
+or
+
+sd1: sd@0x12340000 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pmx1>;
+}
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 5868a0f7255d..0480bc31bfd7 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -3,9 +3,11 @@
 The Mediatek's Pin controller is used to control SoC pins.
 
 Required properties:
-- compatible: value should be either of the following.
+- compatible: value should be one of the following.
     (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
-- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
+    (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
+    (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
+    (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
   specify pins.
 - gpio-controller : Marks the device node as a gpio controller.
@@ -24,6 +26,9 @@ Required properties:
             Only the following flags are supported:
             0 - GPIO_ACTIVE_HIGH
             1 - GPIO_ACTIVE_LOW
+
+Optional properties:
+- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
 - reg: physicall address base for EINT registers
 - interrupt-controller: Marks the device node as an interrupt controller
 - #interrupt-cells: Should be two.
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
new file mode 100644
index 000000000000..77aa11790163
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
@@ -0,0 +1,90 @@
+Qualcomm MSM8660 TLMM block
+
+Required properties:
+- compatible: "qcom,msm8660-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for pins are:
+  gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data
+
+Valid values for function are:
+  gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b,
+  gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n,
+  gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+  gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n,
+  gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s,
+  lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1,
+  usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm,
+
+Example:
+
+	msmgpio: pinctrl@800000 {
+		compatible = "qcom,msm8660-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 16 0x4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsbi12_uart>;
+
+		gsbi12_uart: gsbi12-uart {
+			mux {
+				pins = "gpio117", "gpio118";
+				function = "gsbi12";
+			};
+
+			tx {
+				pins = "gpio118";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio117";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
index bfe72ec055e3..51cee44fc140 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -16,7 +16,9 @@ Required Properties:
     - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
     - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
     - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
-    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
+    - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller.
+    - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller.
+    - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller.
     - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
 
   - reg: Base address and length of each memory resource used by the pin
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index 388b213249fd..391ef4be8d50 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -21,14 +21,15 @@ defined as gpio sub-nodes of the pinmux controller.
 Required properties for iomux controller:
   - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
 		       "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
-		       "rockchip,rk3288-pinctrl"
+		       "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
   - rockchip,grf: phandle referencing a syscon providing the
 	 "general register files"
 
 Optional properties for iomux controller:
   - rockchip,pmu: phandle referencing a syscon providing the pmu registers
 	 as some SoCs carry parts of the iomux controller registers there.
-	 Required for at least rk3188 and rk3288.
+	 Required for at least rk3188 and rk3288. On the rk3368 this should
+	 point to the PMUGRF syscon.
 
 Deprecated properties for iomux controller:
   - reg: first element is the general register space of the iomux controller
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
index b7b55a964f65..f488b0f77406 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -45,8 +45,9 @@ to specify in a pinconf subnode:
 
  Valid values for groups are:
    ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
-   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
-   spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp,
+   spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp,
+   spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp,
    sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
    sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
    can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
@@ -59,7 +60,7 @@ to specify in a pinconf subnode:
 
  Valid values for function are:
    ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
-   spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+   spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
    sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
    smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
    i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index a9b47163bb5d..4976389e432d 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -714,6 +714,7 @@ static struct pinmux_ops foo_pmxops = {
 	.get_function_name = foo_get_fname,
 	.get_function_groups = foo_get_groups,
 	.set_mux = foo_set_mux,
+	.strict = true,
 };
 
 /* Pinmux operations are handled by some pin controller */
@@ -830,6 +831,11 @@ separate memory range only intended for GPIO driving, and the register
 range dealing with pin config and pin multiplexing get placed into a
 different memory range and a separate section of the data sheet.
 
+A flag "strict" in struct pinctrl_desc is available to check and deny
+simultaneous access to the same pin from GPIO and pin multiplexing
+consumers on hardware of this type. The pinctrl driver should set this flag
+accordingly.
+
 (B)
 
                        pin config
@@ -850,6 +856,11 @@ possible that the GPIO, pin config and pin multiplex registers are placed into
 the same memory range and the same section of the data sheet, although that
 need not be the case.
 
+In some pin controllers, although the physical pins are designed in the same
+way as (B), the GPIO function still can't be enabled at the same time as the
+peripheral functions. So again the "strict" flag should be set, denying
+simultaneous activation by GPIO and other muxed in devices.
+
 From a kernel point of view, however, these are different aspects of the
 hardware and shall be put into different subsystems: