Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.

15 files changed, 20 insertions, 61 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
index 0dcb7c7d3e40..944657684d73 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
index c010fafc66a8..c7194e87d5f4 100644
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index ff1bc4b1bb3b..fb5056b22685 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  If the PHY reports an incorrect ID (or none at all) then the
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as
diff --git a/Documentation/media/uapi/cec/cec-func-close.rst b/Documentation/media/uapi/cec/cec-func-close.rst
index 8267c31b317d..895d9c2d1c04 100644
--- a/Documentation/media/uapi/cec/cec-func-close.rst
+++ b/Documentation/media/uapi/cec/cec-func-close.rst
@@ -33,11 +33,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 Closes the cec device. Resources associated with the file descriptor are
 freed. The device configuration remain unchanged.
 
diff --git a/Documentation/media/uapi/cec/cec-func-ioctl.rst b/Documentation/media/uapi/cec/cec-func-ioctl.rst
index 9e8dbb118d6a..7dcfd178fb24 100644
--- a/Documentation/media/uapi/cec/cec-func-ioctl.rst
+++ b/Documentation/media/uapi/cec/cec-func-ioctl.rst
@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 The :c:func:`ioctl()` function manipulates cec device parameters. The
 argument ``fd`` must be an open file descriptor.
 
diff --git a/Documentation/media/uapi/cec/cec-func-open.rst b/Documentation/media/uapi/cec/cec-func-open.rst
index af3f5b5c24c6..0304388cd159 100644
--- a/Documentation/media/uapi/cec/cec-func-open.rst
+++ b/Documentation/media/uapi/cec/cec-func-open.rst
@@ -46,11 +46,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To open a cec device applications call :c:func:`open()` with the
 desired device name. The function has no side effects; the device
 configuration remain unchanged.
diff --git a/Documentation/media/uapi/cec/cec-func-poll.rst b/Documentation/media/uapi/cec/cec-func-poll.rst
index cfb73e6027a5..6a863cfda6e0 100644
--- a/Documentation/media/uapi/cec/cec-func-poll.rst
+++ b/Documentation/media/uapi/cec/cec-func-poll.rst
@@ -39,11 +39,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 With the :c:func:`poll()` function applications can wait for CEC
 events.
 
diff --git a/Documentation/media/uapi/cec/cec-intro.rst b/Documentation/media/uapi/cec/cec-intro.rst
index 4a19ea5323a9..07ee2b8f89d6 100644
--- a/Documentation/media/uapi/cec/cec-intro.rst
+++ b/Documentation/media/uapi/cec/cec-intro.rst
@@ -3,11 +3,6 @@
 Introduction
 ============
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 HDMI connectors provide a single pin for use by the Consumer Electronics
 Control protocol. This protocol allows different devices connected by an
 HDMI cable to communicate. The protocol for CEC version 1.4 is defined
@@ -31,3 +26,15 @@ control just the CEC pin.
 Drivers that support CEC will create a CEC device node (/dev/cecX) to
 give userspace access to the CEC adapter. The
 :ref:`CEC_ADAP_G_CAPS` ioctl will tell userspace what it is allowed to do.
+
+In order to check the support and test it, it is suggested to download
+the `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_ package. It
+provides three tools to handle CEC:
+
+- cec-ctl: the Swiss army knife of CEC. Allows you to configure, transmit
+  and monitor CEC messages.
+
+- cec-compliance: does a CEC compliance test of a remote CEC device to
+  determine how compliant the CEC implementation is.
+
+- cec-follower: emulates a CEC follower.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
index 2b0ddb14b280..a0e961f11017 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-caps.rst
@@ -29,11 +29,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 All cec devices must support :ref:`ioctl CEC_ADAP_G_CAPS <CEC_ADAP_G_CAPS>`. To query
 device information, applications call the ioctl with a pointer to a
 struct :c:type:`cec_caps`. The driver fills the structure and
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
index b878637e91b3..09f09bbe28d4 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-log-addrs.rst
@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current CEC logical addresses, applications call
 :ref:`ioctl CEC_ADAP_G_LOG_ADDRS <CEC_ADAP_G_LOG_ADDRS>` with a pointer to a
 struct :c:type:`cec_log_addrs` where the driver stores the logical addresses.
diff --git a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
index 3357deb43c85..a3cdc75cec3e 100644
--- a/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-adap-g-phys-addr.rst
@@ -35,11 +35,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To query the current physical address applications call
 :ref:`ioctl CEC_ADAP_G_PHYS_ADDR <CEC_ADAP_G_PHYS_ADDR>` with a pointer to a __u16 where the
 driver stores the physical address.
diff --git a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
index e256c6605de7..6e589a1fae17 100644
--- a/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-dqevent.rst
@@ -30,11 +30,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 CEC devices can send asynchronous events. These can be retrieved by
 calling :c:func:`CEC_DQEVENT`. If the file descriptor is in
 non-blocking mode and no event is pending, then it will return -1 and
diff --git a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
index 4f5818b9d277..e4ded9df0a84 100644
--- a/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-g-mode.rst
@@ -31,11 +31,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 By default any filehandle can use :ref:`CEC_TRANSMIT`, but in order to prevent
 applications from stepping on each others toes it must be possible to
 obtain exclusive access to the CEC adapter. This ioctl sets the
diff --git a/Documentation/media/uapi/cec/cec-ioc-receive.rst b/Documentation/media/uapi/cec/cec-ioc-receive.rst
index bdf015b1d1dc..dc2adb391c0a 100644
--- a/Documentation/media/uapi/cec/cec-ioc-receive.rst
+++ b/Documentation/media/uapi/cec/cec-ioc-receive.rst
@@ -34,11 +34,6 @@ Arguments
 Description
 ===========
 
-.. note::
-
-   This documents the proposed CEC API. This API is not yet finalized
-   and is currently only available as a staging kernel module.
-
 To receive a CEC message the application has to fill in the
 ``timeout`` field of struct :c:type:`cec_msg` and pass it to
 :ref:`ioctl CEC_RECEIVE <CEC_RECEIVE>`.
diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt
index 8a39ce45d8a0..008ecb588317 100644
--- a/Documentation/power/states.txt
+++ b/Documentation/power/states.txt
@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
+parameter in the kernel command line.
 
 The properties of all of the sleep states are described below.