Merge tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the "big" set of tty/serial driver changes for 6.2-rc1.

  As in previous kernel releases, nothing big here at all, just some
  small incremental serial/tty layer cleanups and some individual driver
  additions and fixes. Highlights are:

   - serial helper macros from Jiri Slaby to reduce the amount of
     duplicated code in serial drivers

   - api cleanups and consolidations from Ilpo Järvinen in lots of
     serial drivers

   - the usual set of n_gsm fixes from Daniel Starke as that code gets
     exercised more

   - TIOCSTI is finally able to be disabled if requested (security
     hardening feature from Kees Cook)

   - fsl_lpuart driver fixes and features added

   - other small serial driver additions and fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
  serial: atmel: don't stop the transmitter when doing PIO
  serial: atmel: cleanup atmel_start+stop_tx()
  tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
  serial: sunsab: Fix error handling in sunsab_init()
  serial: altera_uart: fix locking in polling mode
  serial: pch: Fix PCI device refcount leak in pch_request_dma()
  tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
  tty: serial: fsl_lpuart: Add runtime pm support
  tty: serial: fsl_lpuart: enable wakeup source for lpuart
  serdev: Replace poll loop by readx_poll_timeout() macro
  tty: synclink_gt: unwind actions in error path of net device open
  serial: stm32: move dma_request_chan() before clk_prepare_enable()
  dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
  serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
  serial: amba-pl011: avoid SBSA UART accessing DMACR register
  tty: serial: altera_jtaguart: remove struct altera_jtaguart
  tty: serial: altera_jtaguart: use uart_port::read_status_mask
  tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
  tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
  n_tty: Rename tail to old_tail in n_tty_read()
  ...

5 files changed, 39 insertions, 28 deletions

diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
index 9ca7a18ecd8b..315ceb722e19 100644
--- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -20,6 +20,7 @@ properties:
     oneOf:
       - enum:
           - ingenic,jz4740-uart
+          - ingenic,jz4750-uart
           - ingenic,jz4760-uart
           - ingenic,jz4780-uart
           - ingenic,x1000-uart
@@ -31,6 +32,9 @@ properties:
       - items:
           - const: ingenic,jz4725b-uart
           - const: ingenic,jz4740-uart
+      - items:
+          - const: ingenic,jz4755-uart
+          - const: ingenic,jz4750-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index f930e7f1349f..f81f2d67a1ed 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -67,6 +67,7 @@ properties:
           - enum:
               - renesas,scif-r8a779a0     # R-Car V3U
               - renesas,scif-r8a779f0     # R-Car S4-8
+              - renesas,scif-r8a779g0     # R-Car V4H
           - const: renesas,rcar-gen4-scif # R-Car Gen4
           - const: renesas,scif           # generic SCIF compatible UART
 
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
index f7617b88c7c3..2f4390e8d4e8 100644
--- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -67,8 +67,7 @@ allOf:
   - if:
       properties:
         xlnx,use-parity:
-          contains:
-            const: 1
+          const: 1
     then:
       required:
         - xlnx,odd-parity
diff --git a/Documentation/driver-api/serial/driver.rst b/Documentation/driver-api/serial/driver.rst
index 23c6b956cd90..98d268555dcc 100644
--- a/Documentation/driver-api/serial/driver.rst
+++ b/Documentation/driver-api/serial/driver.rst
@@ -78,6 +78,9 @@ Other functions
            uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
            uart_try_toggle_sysrq uart_get_console
 
+.. kernel-doc:: include/linux/serial_core.h
+   :identifiers: uart_port_tx_limited uart_port_tx
+
 Other notes
 -----------
 
diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
index 6ebad75c74ed..dce061ef7647 100644
--- a/Documentation/driver-api/serial/serial-rs485.rst
+++ b/Documentation/driver-api/serial/serial-rs485.rst
@@ -29,23 +29,28 @@ RS485 Serial Communications
 3. Data Structures Already Available in the Kernel
 ==================================================
 
-   The Linux kernel provides the serial_rs485 structure (see [1]) to handle
-   RS485 communications. This data structure is used to set and configure RS485
+   The Linux kernel provides the struct serial_rs485 to handle RS485
+   communications. This data structure is used to set and configure RS485
    parameters in the platform data and in ioctls.
 
-   The device tree can also provide RS485 boot time parameters (see [2]
-   for bindings). The driver is in charge of filling this data structure from
-   the values given by the device tree.
+   The device tree can also provide RS485 boot time parameters
+   [#DT-bindings]_. The serial core fills the struct serial_rs485 from the
+   values given by the device tree when the driver calls
+   uart_get_rs485_mode().
 
    Any driver for devices capable of working both as RS232 and RS485 should
-   implement the rs485_config callback and provide rs485_supported in the
-   uart_port structure. The serial core calls rs485_config to do the device
-   specific part in response to TIOCSRS485 ioctl (see below). The rs485_config
-   callback receives a pointer to a sanitizated serial_rs485 structure. The
-   serial_rs485 userspace provides is sanitized before calling rs485_config
-   using rs485_supported that indicates what RS485 features the driver supports
-   for the uart_port. TIOCGRS485 ioctl can be used to read back the
-   serial_rs485 structure matching to the current configuration.
+   implement the ``rs485_config`` callback and provide ``rs485_supported``
+   in the ``struct uart_port``. The serial core calls ``rs485_config`` to do
+   the device specific part in response to TIOCSRS485 ioctl (see below). The
+   ``rs485_config`` callback receives a pointer to a sanitizated struct
+   serial_rs485. The struct serial_rs485 userspace provides is sanitized
+   before calling ``rs485_config`` using ``rs485_supported`` that indicates
+   what RS485 features the driver supports for the ``struct uart_port``.
+   TIOCGRS485 ioctl can be used to read back the struct serial_rs485
+   matching to the current configuration.
+
+.. kernel-doc:: include/uapi/linux/serial.h
+   :identifiers: serial_rs485 uart_get_rs485_mode
 
 4. Usage from user-level
 ========================
@@ -103,29 +108,28 @@ RS485 Serial Communications
 ========================
 
    The Linux kernel provides addressing mode for multipoint RS-485 serial
-   communications line. The addressing mode is enabled with SER_RS485_ADDRB
-   flag in serial_rs485. Struct serial_rs485 has two additional flags and
-   fields for enabling receive and destination addresses.
+   communications line. The addressing mode is enabled with
+   ``SER_RS485_ADDRB`` flag in struct serial_rs485. The struct serial_rs485
+   has two additional flags and fields for enabling receive and destination
+   addresses.
 
    Address mode flags:
-	- SER_RS485_ADDRB: Enabled addressing mode (sets also ADDRB in termios).
-	- SER_RS485_ADDR_RECV: Receive (filter) address enabled.
-	- SER_RS485_ADDR_DEST: Set destination address.
+	- ``SER_RS485_ADDRB``: Enabled addressing mode (sets also ADDRB in termios).
+	- ``SER_RS485_ADDR_RECV``: Receive (filter) address enabled.
+	- ``SER_RS485_ADDR_DEST``: Set destination address.
 
-   Address fields (enabled with corresponding SER_RS485_ADDR_* flag):
-	- addr_recv: Receive address.
-	- addr_dest: Destination address.
+   Address fields (enabled with corresponding ``SER_RS485_ADDR_*`` flag):
+	- ``addr_recv``: Receive address.
+	- ``addr_dest``: Destination address.
 
    Once a receive address is set, the communication can occur only with the
    particular device and other peers are filtered out. It is left up to the
    receiver side to enforce the filtering. Receive address will be cleared
-   if SER_RS485_ADDR_RECV is not set.
+   if ``SER_RS485_ADDR_RECV`` is not set.
 
    Note: not all devices supporting RS485 support multipoint addressing.
 
 6. References
 =============
 
- [1]	include/uapi/linux/serial.h
-
- [2]	Documentation/devicetree/bindings/serial/rs485.txt
+.. [#DT-bindings]	Documentation/devicetree/bindings/serial/rs485.txt