Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "This update delivers:

   - Yet another interrupt chip diver (LPC32xx)
   - Core functions to handle partitioned per-cpu interrupts
   - Enhancements to the IPI core
   - Proper handling of irq type configuration
   - A large set of ARM GIC enhancements
   - The usual pile of small fixes, cleanups and enhancements"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  irqchip/bcm2836: Use a more generic memory barrier call
  irqchip/bcm2836: Fix compiler warning on 64-bit build
  irqchip/bcm2836: Drop smp_set_ops on arm64 builds
  irqchip/gic: Add helper functions for GIC setup and teardown
  irqchip/gic: Store GIC configuration parameters
  irqchip/gic: Pass GIC pointer to save/restore functions
  irqchip/gic: Return an error if GIC initialisation fails
  irqchip/gic: Remove static irq_chip definition for eoimode1
  irqchip/gic: Don't initialise chip if mapping IO space fails
  irqchip/gic: WARN if setting the interrupt type for a PPI fails
  irqchip/gic: Don't unnecessarily write the IRQ configuration
  irqchip: Mask the non-type/sense bits when translating an IRQ
  genirq: Ensure IRQ descriptor is valid when setting-up the IRQ
  irqchip/gic-v3: Configure all interrupts as non-secure Group-1
  irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum
  irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h>
  irqchip/mbigen: Checking for IS_ERR() instead of NULL
  irqchip/gic-v3: Remove inexistant register definition
  irqchip/gicv3-its: Don't allow devices whose ID is outside range
  irqchip: Add LPC32xx interrupt controller driver
  ...

2 files changed, 62 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 007a5b46256a..4c29cdab0ea5 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -11,6 +11,8 @@ Main node required properties:
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. Must be a single cell with a value of at least 3.
+  If the system requires describing PPI affinity, then the value must
+  be at least 4.
 
   The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
   interrupts. Other values are reserved for future use.
@@ -24,7 +26,14 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use and must have a value
+  The 4th cell is a phandle to a node describing a set of CPUs this
+  interrupt is affine to. The interrupt must be a PPI, and the node
+  pointed must be a subnode of the "ppi-partitions" subnode. For
+  interrupt types other than PPI or PPIs that are not partitionned,
+  this cell must be zero. See the "ppi-partitions" node description
+  below.
+
+  Cells 5 and beyond are reserved for future use and must have a value
   of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
@@ -50,6 +59,11 @@ Optional
 
 Sub-nodes:
 
+PPI affinity can be expressed as a single "ppi-partitions" node,
+containing a set of sub-nodes, each with the following property:
+- affinity: Should be a list of phandles to CPU nodes (as described in
+Documentation/devicetree/bindings/arm/cpus.txt).
+
 GICv3 has one or more Interrupt Translation Services (ITS) that are
 used to route Message Signalled Interrupts (MSI) to the CPUs.
 
@@ -91,7 +105,7 @@ Examples:
 
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
+		#interrupt-cells = <4>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -119,4 +133,20 @@ Examples:
 			#msi-cells = <1>;
 			reg = <0x0 0x2c400000 0 0x200000>;
 		};
+
+		ppi-partitions {
+			part0: interrupt-partition-0 {
+				affinity = <&cpu0 &cpu2>;
+			};
+
+			part1: interrupt-partition-1 {
+				affinity = <&cpu1 &cpu3>;
+			};
+		};
+	};
+
+
+	device@0 {
+		reg = <0 0 0 4>;
+		interrupts = <1 1 4 &part0>;
 	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
new file mode 100644
index 000000000000..9e389493203f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
@@ -0,0 +1,30 @@
+* Freescale Layerscape SCFG PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "fsl,<soc-name>-msi" to identify
+	      Layerscape PCIe MSI controller block such as:
+              "fsl,1s1021a-msi"
+              "fsl,1s1043a-msi"
+- msi-controller: indicates that this is a PCIe MSI controller node
+- reg: physical base address of the controller and length of memory mapped.
+- interrupts: an interrupt to the parent interrupt controller.
+
+Optional properties:
+- interrupt-parent: the phandle to the parent interrupt controller.
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. If interrupt-parent is not provided, the default parent interrupt
+controller will be used.
+Each PCIe node needs to have property msi-parent that points to
+MSI controller node
+
+Examples:
+
+	msi1: msi-controller@1571000 {
+		compatible = "fsl,1s1043a-msi";
+		reg = <0x0 0x1571000 0x0 0x8>,
+		msi-controller;
+		interrupts = <0 116 0x4>;
+	};