Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
 "These updates came in after I had already tagged the branches, but
  they still seem appropriate for 6.0 and most of them were part of
  linux-next through other trees.

   - The reset controller tree adds one new driver for the TI TPS380x
     power management chip and a few minor changes in other drivers

   - Apple M1 now has a DT entry for the NVMe controller after the
     driver was merged, and has a new mailing list in the MAINTAINERS
     file.

   - Fixes for USB on the Socionext Uniphier platforms and the network
     controller on Intel Cyclone5"

* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
  ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
  arm64: dts: apple: t8103: Add ANS2 NVMe nodes
  reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
  reset: tps380x: Add TPS380x device driver supprt
  dt-bindings: reset: Add TPS380x documentation
  dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
  ARM: dts: add EMAC AXI settings for Cyclone5
  reset: reset-simple should depends on HAS_IOMEM
  Revert "reset: microchip-sparx5: allow building as a module"
  reset: a10sr: allow building under COMPILE_TEST
  reset: allow building of reset simple driver if expert config selected
  reset: microchip-sparx5: allow building as a module
  arm64: dts: apple: Re-parent ANS2 power domains
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

2 files changed, 50 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
index 86c2569ced97..731b8ce01525 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
           - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
           - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
       - const: renesas,rzg2l-usbphy-ctrl
diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 000000000000..afc835eda0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...