aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds2016-01-12 12:39:07 -0800
committerLinus Torvalds2016-01-12 12:39:07 -0800
commit01e9d22638f387b5413163d1030169b6478c09c5 (patch)
treef36991611954663429f2ed36ec19145dd0c9ec4f /Documentation
parent541d284be0fcca3d3990e6dd89b091aec66849c6 (diff)
parent6660800fb7fd0f66faecb3c550fe59709220ade5 (diff)
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: - UEFI boot and runtime services support for ARM from Ard Biesheuvel and Roy Franz. - DT compatibility with old atags booting protocol for Nokia N900 devices from Ivaylo Dimitrov. - PSCI firmware interface using new arm-smc calling convention from Jens Wiklander. - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that support these instructions from Nicolas Pitre. - L2x0 cache updates from Dirk B and Linus Walleij. - Randconfig fixes from Arnd Bergmann. - ARMv7M (nommu) updates from Ezequiel Garcia * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits) ARM: 8481/2: drivers: psci: replace psci firmware calls ARM: 8480/2: arm64: add implementation for arm-smccc ARM: 8479/2: add implementation for arm-smccc ARM: 8478/2: arm/arm64: add arm-smccc ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode ARM: 8482/1: l2x0: make it possible to disable outer sync from DT ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0 ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv() ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section ARM: add UEFI stub support ARM: wire up UEFI init and runtime support ARM: only consider memblocks with NOMAP cleared for linear mapping ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/l2c2x0.txt (renamed from Documentation/devicetree/bindings/arm/l2cc.txt)24
1 files changed, 18 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
index 06c88a4d28ac..fe0398c5c77b 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt
@@ -1,7 +1,8 @@
* ARM L2 Cache Controller
-ARM cores often have a separate level 2 cache controller. There are various
-implementations of the L2 cache controller with compatible programming models.
+ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
+PL310 and variants) based level 2 cache controller. All these various implementations
+of the L2 cache controller have compatible programming models (Note 1).
Some of the properties that are just prefixed "cache-*" are taken from section
3.7.3 of the ePAPR v1.1 specification which can be found at:
https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
@@ -67,12 +68,17 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
-- arm,shared-override : The default behavior of the pl310 cache controller with
- respect to the shareable attribute is to transform "normal memory
- non-cacheable transactions" into "cacheable no allocate" (for reads) or
- "write through no write allocate" (for writes).
+- arm,shared-override : The default behavior of the L220 or PL310 cache
+ controllers with respect to the shareable attribute is to transform "normal
+ memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+ or "write through no write allocate" (for writes).
On systems where this may cause DMA buffer corruption, this property must be
specified to indicate that such transforms are precluded.
+- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
+- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
+- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
+ Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+ will randomly hang unless outer sync operations are disabled.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
@@ -91,3 +97,9 @@ L2: cache-controller {
cache-level = <2>;
interrupts = <45>;
};
+
+Note 1: The description in this document doesn't apply to integrated L2
+ cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+ integrated L2 controllers are assumed to be all preconfigured by
+ early secure boot code. Thus no need to deal with their configuration
+ in the kernel at all.