Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

  1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.

  2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.

  3) Fix severe performance regression due to lack of SKB coalescing of
     fragments during local delivery, from Guillaume Nault.

  4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.

  5) Fix batched events in skbedit packet action, from Roman Mashak.

  6) Propagate VLAN TX offload to hw_enc_features in bond and team
     drivers, from Yue Haibing.

  7) RXRPC local endpoint refcounting fix and read after free in
     rxrpc_queue_local(), from David Howells.

  8) Fix endian bug in ibmveth multicast list handling, from Thomas
     Falcon.

  9) Oops, make nlmsg_parse() wrap around the correct function,
     __nlmsg_parse not __nla_parse(). Fix from David Ahern.

 10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.

 11) Fix memory leak in cxgb4, from Wenwen Wang.

 12) Yet another race in AF_PACKET, from Eric Dumazet.

 13) Fix false detection of retransmit failures in tipc, from Tuong
     Lien.

 14) Use after free in ravb_tstamp_skb, from Tho Vu.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
  ravb: Fix use-after-free ravb_tstamp_skb
  netfilter: nf_tables: map basechain priority to hardware priority
  net: sched: use major priority number as hardware priority
  wimax/i2400m: fix a memory leak bug
  net: cavium: fix driver name
  ibmvnic: Unmap DMA address of TX descriptor buffers after use
  bnxt_en: Fix to include flow direction in L2 key
  bnxt_en: Use correct src_fid to determine direction of the flow
  bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
  bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
  bnxt_en: Improve RX doorbell sequence.
  bnxt_en: Fix VNIC clearing logic for 57500 chips.
  net: kalmia: fix memory leaks
  cx82310_eth: fix a memory leak bug
  bnx2x: Fix VF's VLAN reconfiguration in reload.
  Bluetooth: Add debug setting for changing minimum encryption key size
  tipc: fix false detection of retransmit failures
  lan78xx: Fix memory leaks
  MAINTAINERS: r8169: Update path to the driver
  MAINTAINERS: PHY LIBRARY: Update files in the record
  ...

3 files changed, 3 insertions, 48 deletions

diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index a7d44e71019d..287b98708a40 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -39,7 +39,6 @@ Table : Subdirectories in /proc/sys/net
  802       E802 protocol         ax25       AX25
  ethernet  Ethernet protocol     rose       X.25 PLP layer
  ipv4      IP version 4          x25        X.25 protocol
- ipx       IPX                   token-ring IBM token ring
  bridge    Bridging              decnet     DEC net
  ipv6      IP version 6          tipc       TIPC
  ========= =================== = ========== ==================
@@ -401,33 +400,7 @@ interface.
 (network) that the route leads to, the router (may be directly connected), the
 route flags, and the device the route is using.
 
-
-5. IPX
-------
-
-The IPX protocol has no tunable values in proc/sys/net.
-
-The IPX  protocol  does,  however,  provide  proc/net/ipx. This lists each IPX
-socket giving  the  local  and  remote  addresses  in  Novell  format (that is
-network:node:port). In  accordance  with  the  strange  Novell  tradition,
-everything but the port is in hex. Not_Connected is displayed for sockets that
-are not  tied to a specific remote address. The Tx and Rx queue sizes indicate
-the number  of  bytes  pending  for  transmission  and  reception.  The  state
-indicates the  state  the  socket  is  in and the uid is the owning uid of the
-socket.
-
-The /proc/net/ipx_interface  file lists all IPX interfaces. For each interface
-it gives  the network number, the node number, and indicates if the network is
-the primary  network.  It  also  indicates  which  device  it  is bound to (or
-Internal for  internal  networks)  and  the  Frame  Type if appropriate. Linux
-supports 802.3,  802.2,  802.2  SNAP  and DIX (Blue Book) ethernet framing for
-IPX.
-
-The /proc/net/ipx_route  table  holds  a list of IPX routes. For each route it
-gives the  destination  network, the router node (or Directly) and the network
-address of the router (or Connected) for internal networks.
-
-6. TIPC
+5. TIPC
 -------
 
 tipc_rmem
diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst
index b70b70dc4524..0dd3f748239f 100644
--- a/Documentation/networking/tls-offload.rst
+++ b/Documentation/networking/tls-offload.rst
@@ -506,21 +506,3 @@ Drivers should ignore the changes to TLS the device feature flags.
 These flags will be acted upon accordingly by the core ``ktls`` code.
 TLS device feature flags only control adding of new TLS connection
 offloads, old connections will remain active after flags are cleared.
-
-Known bugs
-==========
-
-skb_orphan() leaks clear text
------------------------------
-
-Currently drivers depend on the :c:member:`sk` member of
-:c:type:`struct sk_buff <sk_buff>` to identify segments requiring
-encryption. Any operation which removes or does not preserve the socket
-association such as :c:func:`skb_orphan` or :c:func:`skb_clone`
-will cause the driver to miss the packets and lead to clear text leaks.
-
-Redirects leak clear text
--------------------------
-
-In the RX direction, if segment has already been decrypted by the device
-and it gets redirected or mirrored - clear text will be transmitted out.
diff --git a/Documentation/networking/tuntap.txt b/Documentation/networking/tuntap.txt
index 949d5dcdd9a3..0104830d5075 100644
--- a/Documentation/networking/tuntap.txt
+++ b/Documentation/networking/tuntap.txt
@@ -204,8 +204,8 @@ Ethernet device, which instead of receiving packets from a physical
 media, receives them from user space program and instead of sending 
 packets via physical media sends them to the user space program. 
 
-Let's say that you configured IPX on the tap0, then whenever 
-the kernel sends an IPX packet to tap0, it is passed to the application
+Let's say that you configured IPv6 on the tap0, then whenever
+the kernel sends an IPv6 packet to tap0, it is passed to the application
 (VTun for example). The application encrypts, compresses and sends it to 
 the other side over TCP or UDP. The application on the other side decompresses
 and decrypts the data received and writes the packet to the TAP device,