Merge 5.16-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

16 files changed, 66 insertions, 39 deletions

diff --git a/Documentation/admin-guide/blockdev/drbd/figures.rst b/Documentation/admin-guide/blockdev/drbd/figures.rst
index bd9a4901fe46..9f73253ea353 100644
--- a/Documentation/admin-guide/blockdev/drbd/figures.rst
+++ b/Documentation/admin-guide/blockdev/drbd/figures.rst
@@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
     :alt:   disk-states-8.dot
     :align: center
 
-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
     :align: center
diff --git a/Documentation/admin-guide/blockdev/drbd/node-states-8.dot b/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
index bfa54e1f8016..6dc3954954d6 100644
--- a/Documentation/admin-guide/blockdev/drbd/node-states-8.dot
+++ b/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
@@ -1,8 +1,3 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
 digraph peer_states {
 	Secondary -> Primary           [ label = "recv state packet" ]
 	Primary   -> Secondary 	       [ label = "recv state packet" ]
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 17f7cee56987..76e5eb5cb62b 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -249,11 +249,16 @@ except ImportError:
 
 html_static_path = ['sphinx-static']
 
-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
+html_css_files = [
+    'theme_overrides.css',
+]
+
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [
+            '_static/theme_overrides.css',
+        ],
+    }
 
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
index 22fc8483256f..82b953181a52 100644
--- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -20,9 +20,9 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - apple,t8103-i2c
-      - apple,i2c
+    items:
+      - const: apple,t8103-i2c
+      - const: apple,i2c
 
   reg:
     maxItems: 1
@@ -51,7 +51,7 @@ unevaluatedProperties: false
 examples:
   - |
     i2c@35010000 {
-      compatible = "apple,t8103-i2c";
+      compatible = "apple,t8103-i2c", "apple,i2c";
       reg = <0x35010000 0x4000>;
       interrupt-parent = <&aic>;
       interrupts = <0 627 4>;
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index c65921e66dc1..81c87295912c 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -136,7 +136,7 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 060a309ff8e7..dbe7ecc19ccb 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -142,7 +142,7 @@ examples:
         down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 877183cf4278..1ef849dc74d7 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -79,6 +79,8 @@ properties:
 
             properties:
               data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
                 items:
                   minItems: 1
                   maxItems: 4
@@ -91,18 +93,6 @@ properties:
             required:
               - data-lanes
 
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..ee42328a109d 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
index 04d5654efb38..79906519c652 100644
--- a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -29,7 +29,7 @@ properties:
           - PHY_TYPE_PCIE
           - PHY_TYPE_SATA
           - PHY_TYPE_SGMII
-          - PHY_TYPE_USB
+          - PHY_TYPE_USB3
       - description: The PHY instance
         minimum: 0
         maximum: 1 # for DP, SATA or USB
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
index 06eca6667f67..8367a1fd4057 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -105,7 +105,7 @@ examples:
           reg = <0x65>;
           interrupt-parent = <&gpio1>;
           interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-          ti,watchdog-timer = <0>;
+          ti,watchdog-timeout-ms = <0>;
           ti,sc-ocp-limit-microamp = <2000000>;
           ti,sc-ovp-limit-microvolt = <17800000>;
           monitored-battery = <&bat>;
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
index 0e6249d7c133..5e172e9462b9 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
@@ -19,6 +19,9 @@ properties:
   clocks:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#sound-dai-cells":
     const: 0
 
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 7f987e79337c..52a78a2e362e 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -33,6 +33,7 @@ properties:
               - rockchip,rk3328-spi
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
               - rockchip,rv1126-spi
           - const: rockchip,rk3066-spi
 
diff --git a/Documentation/locking/locktypes.rst b/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- a/Documentation/locking/locktypes.rst
+++ b/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst b/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- a/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ b/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
index b398b8576417..cf908d79666e 100644
--- a/Documentation/process/changes.rst
+++ b/Documentation/process/changes.rst
@@ -35,6 +35,7 @@ GNU make               3.81             make --version
 binutils               2.23             ld -v
 flex                   2.5.35           flex --version
 bison                  2.0              bison --version
+pahole                 1.16             pahole --version
 util-linux             2.10o            fdformat --version
 kmod                   13               depmod -V
 e2fsprogs              1.41.4           e2fsck -V
@@ -108,6 +109,16 @@ Bison
 Since Linux 4.16, the build system generates parsers
 during build.  This requires bison 2.0 or later.
 
+pahole:
+-------
+
+Since Linux 5.2, if CONFIG_DEBUG_INFO_BTF is selected, the build system
+generates BTF (BPF Type Format) from DWARF in vmlinux, a bit later from kernel
+modules as well.  This requires pahole v1.16 or later.
+
+It is found in the 'dwarves' or 'pahole' distro packages or from
+https://fedorapeople.org/~acme/dwarves/.
+
 Perl
 ----
 
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index da085d63af9b..6b3aaed66fba 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -14,7 +14,8 @@ works, see Documentation/process/development-process.rst. Also, read
 Documentation/process/submit-checklist.rst
 for a list of items to check before submitting code.  If you are submitting
 a driver, also read Documentation/process/submitting-drivers.rst; for device
-tree binding patches, read Documentation/process/submitting-patches.rst.
+tree binding patches, read
+Documentation/devicetree/bindings/submitting-patches.rst.
 
 This documentation assumes that you're using ``git`` to prepare your patches.
 If you're unfamiliar with ``git``, you would be well-advised to learn how to