Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patch pull request for 5.1-rc1.

  The largest thing by far is the new habanalabs driver for their AI
  accelerator chip. For now it is in the drivers/misc directory but will
  probably move to a new directory soon along with other drivers of this
  type.

  Other than that, just the usual set of individual driver updates and
  fixes. There's an "odd" merge in here from the DRM tree that they
  asked me to do as the MEI driver is starting to interact with the i915
  driver, and it needed some coordination. All of those patches have
  been properly acked by the relevant subsystem maintainers.

  All of these have been in linux-next with no reported issues, most for
  quite some time"

* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
  habanalabs: adjust Kconfig to fix build errors
  habanalabs: use %px instead of %p in error print
  habanalabs: use do_div for 64-bit divisions
  intel_th: gth: Fix an off-by-one in output unassigning
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: use NULL to initialize array of pointers
  habanalabs: fix little-endian<->cpu conversion warnings
  habanalabs: soft-reset device if context-switch fails
  habanalabs: print pointer using %p
  habanalabs: fix memory leak with CBs with unaligned size
  habanalabs: return correct error code on MMU mapping failure
  habanalabs: add comments in uapi/misc/habanalabs.h
  habanalabs: extend QMAN0 job timeout
  habanalabs: set DMA0 completion to SOB 1007
  habanalabs: fix validation of WREG32 to DMA completion
  habanalabs: fix mmu cache registers init
  habanalabs: disable CPU access on timeouts
  habanalabs: add MMU DRAM default page mapping
  habanalabs: Dissociate RAZWI info from event types
  misc/habanalabs: adjust Kconfig to fix build errors
  ...

17 files changed, 698 insertions, 3 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
index 3fed8fdb873d..826689dcc2e6 100644
--- a/Documentation/ABI/stable/sysfs-bus-vmbus
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -146,3 +146,36 @@ KernelVersion:	4.16
 Contact:	Stephen Hemminger <sthemmin@microsoft.com>
 Description:	Binary file created by uio_hv_generic for ring buffer
 Users:		Userspace drivers
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_in_full
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the inbound ring
+		buffer transitioning from full to not full while a packet is
+		waiting for buffer space to become available
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_out_empty
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the outbound ring
+		buffer transitioning from empty to not empty
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_first
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of write operations that were the first to encounter an
+		outbound ring buffer full condition
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_total
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Total number of write operations that encountered an outbound
+		ring buffer full condition
+Users:          Debugging tools
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
new file mode 100644
index 000000000000..2f5b80be07a3
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -0,0 +1,126 @@
+What:           /sys/kernel/debug/habanalabs/hl<n>/addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the device address to be used for read or write through
+                PCI bar. The acceptable value is a string that starts with "0x"
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently allocated
+                command buffers
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently active
+                command submissions
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/command_submission_jobs
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with detailed information about each JOB (CB) of
+                each active command submission
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/data32
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the root user to read or write directly through the
+                device's PCI bar. Writing to this file generates a write
+                transaction while reading from the file generates a read
+                transcation. This custom interface is needed (instead of using
+                the generic Linux user-space PCI mapping) because the DDR bar
+                is very small compared to the DDR memory and only the driver can
+                move the bar before and after the transaction
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/device
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Enables the root user to set the device to specific state.
+                Valid values are "disable", "enable", "suspend", "resume".
+                User can read this property to see the valid values
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C device address for I2C transaction that is generated
+                by the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C bus address for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Triggers an I2C transaction that is generated by the device's
+                CPU. Writing to this file generates a write transaction while
+                reading from the file generates a read transcation
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets I2C register id for I2C transaction that is generated by
+                the device's CPU
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led0
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the first S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led1
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the second S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/led2
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the state of the third S/W led on the device
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the hop values and physical address for a given ASID
+                and virtual address. The user should write the ASID and VA into
+                the file and then read the file to get the result.
+                e.g. to display info about VA 0x1000 for ASID 1 you need to do:
+                echo "1 0x1000" > /sys/kernel/debug/habanalabs/hl0/mmu
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Sets the PCI power state. Valid values are "1" for D0 and "2"
+                for D3Hot
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about the currently user
+                pointers (user virtual addresses) that are pinned and mapped
+                to DMA addresses
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/vm
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays a list with information about all the active virtual
+                address mappings per ASID
diff --git a/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices b/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
index 4d48a9451866..d1f667104944 100644
--- a/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
+++ b/Documentation/ABI/testing/sysfs-bus-intel_th-output-devices
@@ -3,11 +3,13 @@ Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RW) Writes of 1 or 0 enable or disable trace output to this
-		output device. Reads return current status.
+		output device. Reads return current status. Requires that the
+		correstponding output port driver be loaded.
 
 What:		/sys/bus/intel_th/devices/<intel_th_id>-msc<msc-id>/port
 Date:		June 2015
 KernelVersion:	4.3
 Contact:	Alexander Shishkin <alexander.shishkin@linux.intel.com>
 Description:	(RO) Port number, corresponding to this output device on the
-		switch (GTH).
+		switch (GTH) or "unassigned" if the corresponding output
+		port driver is not loaded.
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
new file mode 100644
index 000000000000..78b2bcf316a3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -0,0 +1,190 @@
+What:           /sys/class/habanalabs/hl<n>/armcp_kernel_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Linux kernel running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/armcp_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the application running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/cpld_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's CPLD F/W
+
+What:           /sys/class/habanalabs/hl<n>/device_type
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the code name of the device according to its type.
+                The supported values are: "GOYA"
+
+What:           /sys/class/habanalabs/hl<n>/eeprom
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    A binary file attribute that contains the contents of the
+                on-board EEPROM
+
+What:           /sys/class/habanalabs/hl<n>/fuse_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the device's version from the eFuse
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Interface to trigger a hard-reset operation for the device.
+                Hard-reset will reset ALL internal components of the device
+                except for the PCI interface and the internal PLLs
+
+What:           /sys/class/habanalabs/hl<n>/hard_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays how many times the device have undergone a hard-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/high_pll
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency for MME, TPC
+                and IC when the power management profile is set to "automatic".
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                Interconnect fabric. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device IC clock might be set to lower value then the
+                maximum. The user should read the ic_clk_curr to see the actual
+                frequency value of the IC
+
+What:           /sys/class/habanalabs/hl<n>/ic_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the Interconnect fabric
+
+What:           /sys/class/habanalabs/hl<n>/infineon_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's power supply F/W code
+
+What:           /sys/class/habanalabs/hl<n>/max_power
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum power consumption of the
+                device in milliwatts.
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                MME compute engine. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device MME clock might be set to lower value then the
+                maximum. The user should read the mme_clk_curr to see the actual
+                frequency value of the MME
+
+What:           /sys/class/habanalabs/hl<n>/mme_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the MME compute engine
+
+What:           /sys/class/habanalabs/hl<n>/pci_addr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the PCI address of the device. This is needed so the
+                user would be able to open a device based on its PCI address
+
+What:           /sys/class/habanalabs/hl<n>/pm_mng_profile
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Power management profile. Values are "auto", "manual". In "auto"
+                mode, the driver will set the maximum clock frequency to a high
+                value when a user-space process opens the device's file (unless
+                it was already opened by another process). The driver will set
+                the max clock frequency to a low value when there are no user
+                processes that are opened on the device's file. In "manual"
+                mode, the user sets the maximum clock frequency by writing to
+                ic_clk, mme_clk and tpc_clk
+
+
+What:           /sys/class/habanalabs/hl<n>/preboot_btl_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the device's preboot F/W code
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Interface to trigger a soft-reset operation for the device.
+                Soft-reset will reset only the compute and DMA engines of the
+                device
+
+What:           /sys/class/habanalabs/hl<n>/soft_reset_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays how many times the device have undergone a soft-reset
+                operation since the driver was loaded
+
+What:           /sys/class/habanalabs/hl<n>/status
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Status of the card: "Operational", "Malfunction", "In reset".
+
+What:           /sys/class/habanalabs/hl<n>/thermal_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the Device's thermal daemon
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Allows the user to set the maximum clock frequency of the
+                TPC compute engines. Writes to this parameter affect the device
+                only when the power management profile is set to "manual" mode.
+                The device TPC clock might be set to lower value then the
+                maximum. The user should read the tpc_clk_curr to see the actual
+                frequency value of the TPC
+
+What:           /sys/class/habanalabs/hl<n>/tpc_clk_curr
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the current clock frequency of the TPC compute engines
+
+What:           /sys/class/habanalabs/hl<n>/uboot_ver
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Version of the u-boot running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/write_open_cnt
+Date:           Jan 2019
+KernelVersion:  5.1
+Contact:        oded.gabbay@gmail.com
+Description:    Displays the total number of user processes that are currently
+                opened on the device's file
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
new file mode 100644
index 000000000000..936fbdf12815
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt
@@ -0,0 +1,27 @@
+* PTN5150 CC (Configuration Channel) Logic device
+
+PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
+connector application with CC control logic detection and indication functions.
+It is interfaced to the host controller using an I2C interface.
+
+Required properties:
+- compatible: should be "nxp,ptn5150"
+- reg: specifies the I2C slave address of the device
+- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin
+	connected to the PTN5150's INTB pin.
+- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which
+	is used to control VBUS.
+- pinctrl-names : a pinctrl state named "default" must be defined.
+- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus
+	control.
+
+Example:
+	ptn5150@1d {
+		compatible = "nxp,ptn5150";
+		reg = <0x1d>;
+		int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>;
+		vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ptn5150_default>;
+		status = "okay";
+	};
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
index f1e4a2ff47c5..f547bd4549fe 100644
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ b/Documentation/devicetree/bindings/gnss/gnss.txt
@@ -17,6 +17,7 @@ Required properties:
 		  represents
 
 Optional properties:
+- lna-supply	: Separate supply for an LNA
 - enable-gpios	: GPIO used to enable the device
 - timepulse-gpios	: Time pulse GPIO
 
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
new file mode 100644
index 000000000000..80cb802813c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.txt
@@ -0,0 +1,35 @@
+Mediatek-based GNSS Receiver DT binding
+
+Mediatek chipsets are used in GNSS-receiver modules produced by several
+vendors and can use a UART interface.
+
+Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
+properties.
+
+Required properties:
+
+- compatible	: Must be
+
+			"globaltop,pa6h"
+
+- vcc-supply	: Main voltage regulator (pin name: VCC)
+
+Optional properties:
+
+- current-speed		: Default UART baud rate
+- gnss-fix-gpios	: GPIO used to determine device position fix state
+			  (pin name: FIX, 3D_FIX)
+- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
+- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
+- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
+
+Example:
+
+serial@1234 {
+	compatible = "ns16550a";
+
+	gnss {
+		compatible = "globaltop,pa6h";
+		vcc-supply = <&vcc_3v3>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
index 648d183cdb77..f4252b6b660b 100644
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.txt
@@ -12,6 +12,7 @@ Required properties:
 
 			"fastrax,uc430"
 			"linx,r4"
+			"wi2wi,w2sg0004"
 			"wi2wi,w2sg0008i"
 			"wi2wi,w2sg0084i"
 
diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
new file mode 100644
index 000000000000..5a3c575b387a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -0,0 +1,60 @@
+Interconnect Provider Device Tree Bindings
+=========================================
+
+The purpose of this document is to define a common set of generic interconnect
+providers/consumers properties.
+
+
+= interconnect providers =
+
+The interconnect provider binding is intended to represent the interconnect
+controllers in the system. Each provider registers a set of interconnect
+nodes, which expose the interconnect related capabilities of the interconnect
+to consumer drivers. These capabilities can be throughput, latency, priority
+etc. The consumer drivers set constraints on interconnect path (or endpoints)
+depending on the use case. Interconnect providers can also be interconnect
+consumers, such as in the case where two network-on-chip fabrics interface
+directly.
+
+Required properties:
+- compatible : contains the interconnect provider compatible string
+- #interconnect-cells : number of cells in a interconnect specifier needed to
+			encode the interconnect node id
+
+Example:
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			#interconnect-cells = <1>;
+			reg = <0x580000 0x14000>;
+			clock-names = "bus_clk", "bus_a_clk";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+
+= interconnect consumers =
+
+The interconnect consumers are device nodes which dynamically express their
+bandwidth requirements along interconnect paths they are connected to. There
+can be multiple interconnect providers on a SoC and the consumer may consume
+multiple paths from different providers depending on use case and the
+components it has to interact with.
+
+Required properties:
+interconnects : Pairs of phandles and interconnect provider specifier to denote
+	        the edge source and destination ports of the interconnect path.
+
+Optional properties:
+interconnect-names : List of interconnect path name strings sorted in the same
+		     order as the interconnects property. Consumers drivers will use
+		     interconnect-names to match interconnect paths with interconnect
+		     specifier pairs.
+
+Example:
+
+	sdhci@7864000 {
+		...
+		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
+		interconnect-names = "sdhc-mem";
+	};
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
new file mode 100644
index 000000000000..5c4f1d911630
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm845.txt
@@ -0,0 +1,24 @@
+Qualcomm SDM845 Network-On-Chip interconnect driver binding
+-----------------------------------------------------------
+
+SDM845 interconnect providers support system bandwidth requirements through
+RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+able to communicate with the BCM through the Resource State Coordinator (RSC)
+associated with each execution environment. Provider nodes must reside within
+an RPMh device node pertaining to their RSC and each provider maps to a single
+RPMh resource.
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"qcom,sdm845-rsc-hlos"
+- #interconnect-cells : should contain 1
+
+Examples:
+
+apps_rsc: rsc {
+	rsc_hlos: interconnect {
+		compatible = "qcom,sdm845-rsc-hlos";
+		#interconnect-cells = <1>;
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
new file mode 100644
index 000000000000..2a1827ab50d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
@@ -0,0 +1,78 @@
+Qualcomm Technologies, Inc. FastRPC Driver
+
+The FastRPC implements an IPC (Inter-Processor Communication)
+mechanism that allows for clients to transparently make remote method
+invocations across DSP and APPS boundaries. This enables developers
+to offload tasks to the DSP and free up the application processor for
+other tasks.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,fastrpc"
+
+- label
+	Usage: required
+	Value type: <string>
+	Definition: should specify the dsp domain name this fastrpc
+	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
+
+- #address-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 1
+
+- #size-cells
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 0
+
+= COMPUTE BANKS
+Each subnode of the Fastrpc represents compute context banks available
+on the dsp.
+- All Compute context banks MUST contain the following properties:
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,fastrpc-compute-cb"
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: Context Bank ID.
+
+- qcom,nsessions:
+	Usage: Optional
+	Value type: <u32>
+	Defination: A value indicating how many sessions can share this
+		    context bank. Defaults to 1 when this property
+		    is not specified.
+
+Example:
+
+adsp-pil {
+	compatible = "qcom,msm8996-adsp-pil";
+	...
+	smd-edge {
+		label = "lpass";
+		fastrpc {
+			compatible = "qcom,fastrpc";
+			qcom,smd-channels = "fastrpcsmd-apps-dsp";
+			label = "adsp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cb@1 {
+				compatible = "qcom,fastrpc-compute-cb";
+				reg = <1>;
+			};
+
+			cb@2 {
+				compatible = "qcom,fastrpc-compute-cb";
+				reg = <2>;
+			};
+			...
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
index 792bc5fafeb9..7a999a135e56 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt
@@ -1,7 +1,7 @@
 Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
 
 This binding represents the on-chip eFuse OTP controller found on
-i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL and i.MX6SLL SoCs.
+i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ and i.MX6SLL SoCs.
 
 Required properties:
 - compatible: should be one of
@@ -9,8 +9,10 @@ Required properties:
 	"fsl,imx6sl-ocotp" (i.MX6SL), or
 	"fsl,imx6sx-ocotp" (i.MX6SX),
 	"fsl,imx6ul-ocotp" (i.MX6UL),
+	"fsl,imx6ull-ocotp" (i.MX6ULL/ULZ),
 	"fsl,imx7d-ocotp" (i.MX7D/S),
 	"fsl,imx6sll-ocotp" (i.MX6SLL),
+	"fsl,imx7ulp-ocotp" (i.MX7ULP),
 	followed by "syscon".
 - #address-cells : Should be 1
 - #size-cells : Should be 1
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8f574c778290..542bbf304f13 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -154,6 +154,7 @@ geniatech	Geniatech, Inc.
 giantec	Giantec Semiconductor, Inc.
 giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
+globaltop	GlobalTop Technology, Inc.
 gmt	Global Mixed-mode Technology, Inc.
 goodix	Shenzhen Huiding Technology Co., Ltd.
 google	Google, Inc.
diff --git a/Documentation/driver-api/component.rst b/Documentation/driver-api/component.rst
new file mode 100644
index 000000000000..2da4a8f20607
--- /dev/null
+++ b/Documentation/driver-api/component.rst
@@ -0,0 +1,17 @@
+======================================
+Component Helper for Aggregate Drivers
+======================================
+
+.. kernel-doc:: drivers/base/component.c
+   :doc: overview
+
+
+API
+===
+
+.. kernel-doc:: include/linux/component.h
+   :internal:
+
+.. kernel-doc:: drivers/base/component.c
+   :export:
+
diff --git a/Documentation/driver-api/device_link.rst b/Documentation/driver-api/device_link.rst
index d6763272e747..2d5919b2b337 100644
--- a/Documentation/driver-api/device_link.rst
+++ b/Documentation/driver-api/device_link.rst
@@ -1,6 +1,9 @@
 .. |struct dev_pm_domain| replace:: :c:type:`struct dev_pm_domain <dev_pm_domain>`
 .. |struct generic_pm_domain| replace:: :c:type:`struct generic_pm_domain <generic_pm_domain>`
 
+
+.. _device_link:
+
 ============
 Device links
 ============
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index ab38ced66a44..c0b600ed9961 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -22,6 +22,7 @@ available subsections can be seen below.
    device_connection
    dma-buf
    device_link
+   component
    message-based
    sound
    frame-buffer
diff --git a/Documentation/interconnect/interconnect.rst b/Documentation/interconnect/interconnect.rst
new file mode 100644
index 000000000000..b8107dcc4cd3
--- /dev/null
+++ b/Documentation/interconnect/interconnect.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+GENERIC SYSTEM INTERCONNECT SUBSYSTEM
+=====================================
+
+Introduction
+------------
+
+This framework is designed to provide a standard kernel interface to control
+the settings of the interconnects on an SoC. These settings can be throughput,
+latency and priority between multiple interconnected devices or functional
+blocks. This can be controlled dynamically in order to save power or provide
+maximum performance.
+
+The interconnect bus is hardware with configurable parameters, which can be
+set on a data path according to the requests received from various drivers.
+An example of interconnect buses are the interconnects between various
+components or functional blocks in chipsets. There can be multiple interconnects
+on an SoC that can be multi-tiered.
+
+Below is a simplified diagram of a real-world SoC interconnect bus topology.
+
+::
+
+ +----------------+    +----------------+
+ | HW Accelerator |--->|      M NoC     |<---------------+
+ +----------------+    +----------------+                |
+                         |      |                    +------------+
+  +-----+  +-------------+      V       +------+     |            |
+  | DDR |  |                +--------+  | PCIe |     |            |
+  +-----+  |                | Slaves |  +------+     |            |
+    ^ ^    |                +--------+     |         |   C NoC    |
+    | |    V                               V         |            |
+ +------------------+   +------------------------+   |            |   +-----+
+ |                  |-->|                        |-->|            |-->| CPU |
+ |                  |-->|                        |<--|            |   +-----+
+ |     Mem NoC      |   |         S NoC          |   +------------+
+ |                  |<--|                        |---------+    |
+ |                  |<--|                        |<------+ |    |   +--------+
+ +------------------+   +------------------------+       | |    +-->| Slaves |
+   ^  ^    ^    ^          ^                             | |        +--------+
+   |  |    |    |          |                             | V
+ +------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
+ | CPUs |  |  | GPU |   | DSP |  | Masters |-->|       P NoC    |-->| Slaves |
+ +------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
+           |
+       +-------+
+       | Modem |
+       +-------+
+
+Terminology
+-----------
+
+Interconnect provider is the software definition of the interconnect hardware.
+The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC
+and Mem NoC.
+
+Interconnect node is the software definition of the interconnect hardware
+port. Each interconnect provider consists of multiple interconnect nodes,
+which are connected to other SoC components including other interconnect
+providers. The point on the diagram where the CPUs connect to the memory is
+called an interconnect node, which belongs to the Mem NoC interconnect provider.
+
+Interconnect endpoints are the first or the last element of the path. Every
+endpoint is a node, but not every node is an endpoint.
+
+Interconnect path is everything between two endpoints including all the nodes
+that have to be traversed to reach from a source to destination node. It may
+include multiple master-slave pairs across several interconnect providers.
+
+Interconnect consumers are the entities which make use of the data paths exposed
+by the providers. The consumers send requests to providers requesting various
+throughput, latency and priority. Usually the consumers are device drivers, that
+send request based on their needs. An example for a consumer is a video decoder
+that supports various formats and image sizes.
+
+Interconnect providers
+----------------------
+
+Interconnect provider is an entity that implements methods to initialize and
+configure interconnect bus hardware. The interconnect provider drivers should
+be registered with the interconnect provider core.
+
+.. kernel-doc:: include/linux/interconnect-provider.h
+
+Interconnect consumers
+----------------------
+
+Interconnect consumers are the clients which use the interconnect APIs to
+get paths between endpoints and set their bandwidth/latency/QoS requirements
+for these interconnect paths.
+
+.. kernel-doc:: include/linux/interconnect.h