Documentation: PCI: Add specification for the PCI vNTB function device

Add specification for the PCI vNTB function device. The endpoint function
driver and the host PCI driver should be created based on this
specification.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

3 files changed, 295 insertions, 0 deletions

diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
index 38ea1f604b6d..4d2333e7ae06 100644
--- a/Documentation/PCI/endpoint/index.rst
+++ b/Documentation/PCI/endpoint/index.rst
@@ -13,6 +13,8 @@ PCI Endpoint Framework
    pci-test-howto
    pci-ntb-function
    pci-ntb-howto
+   pci-vntb-function
+   pci-vntb-howto
 
    function/binding/pci-test
    function/binding/pci-ntb
diff --git a/Documentation/PCI/endpoint/pci-vntb-function.rst b/Documentation/PCI/endpoint/pci-vntb-function.rst
new file mode 100644
index 000000000000..cad8013e8839
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-vntb-function.rst
@@ -0,0 +1,126 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI vNTB Function
+=================
+
+:Author: Frank Li <Frank.Li@nxp.com>
+
+The difference between PCI NTB function and PCI vNTB function is
+
+PCI NTB function need at two endpoint instances and connect HOST1
+and HOST2.
+
+PCI vNTB function only use one host and one endpoint(EP), use NTB
+connect EP and PCI host
+
+.. code-block:: text
+
+
+  +------------+         +---------------------------------------+
+  |            |         |                                       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | NetDev     |         |                        | NetDev       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | Transfer   |         |                        | Transfer     |
+  +------------+         |                        +--------------+
+  |            |         |                        |              |
+  |  PCI NTB   |         |                        |              |
+  |    EPF     |         |                        |              |
+  |   Driver   |         |                        | PCI Virtual  |
+  |            |         +---------------+        | NTB Driver   |
+  |            |         | PCI EP NTB    |<------>|              |
+  |            |         |  FN Driver    |        |              |
+  +------------+         +---------------+        +--------------+
+  |            |         |               |        |              |
+  |  PCI BUS   | <-----> |  PCI EP BUS   |        |  Virtual PCI |
+  |            |  PCI    |               |        |     BUS      |
+  +------------+         +---------------+--------+--------------+
+      PCI RC                        PCI EP
+
+Constructs used for Implementing vNTB
+=====================================
+
+	1) Config Region
+	2) Self Scratchpad Registers
+	3) Peer Scratchpad Registers
+	4) Doorbell (DB) Registers
+	5) Memory Window (MW)
+
+
+Config Region:
+--------------
+
+It is same as PCI NTB Function driver
+
+Scratchpad Registers:
+---------------------
+
+  It is appended after Config region.
+
+  +--------------------------------------------------+ Base
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  |          Common Config Register                  |
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |
+  |    Peer Span Space    |    Span Space            |
+  |                       |                          |
+  |                       |                          |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |      + span_count * 4
+  |                       |                          |
+  |     Span Space        |   Peer Span Space        |
+  |                       |                          |
+  +-----------------------+--------------------------+
+        Virtual PCI             Pcie Endpoint
+        NTB Driver               NTB Driver
+
+
+Doorbell Registers:
+-------------------
+
+  Doorbell Registers are used by the hosts to interrupt each other.
+
+Memory Window:
+--------------
+
+  Actual transfer of data between the two hosts will happen using the
+  memory window.
+
+Modeling Constructs:
+====================
+
+32-bit BARs.
+
+======  ===============
+BAR NO  CONSTRUCTS USED
+======  ===============
+BAR0    Config Region
+BAR1    Doorbell
+BAR2    Memory Window 1
+BAR3    Memory Window 2
+BAR4    Memory Window 3
+BAR5    Memory Window 4
+======  ===============
+
+64-bit BARs.
+
+======  ===============================
+BAR NO  CONSTRUCTS USED
+======  ===============================
+BAR0    Config Region + Scratchpad
+BAR1
+BAR2    Doorbell
+BAR3
+BAR4    Memory Window 1
+BAR5
+======  ===============================
+
+
diff --git a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
new file mode 100644
index 000000000000..524cd487e184
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -0,0 +1,167 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================================
+PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide
+===================================================================
+
+:Author: Frank Li <Frank.Li@nxp.com>
+
+This document is a guide to help users use pci-epf-vntb function driver
+and ntb_hw_epf host driver for NTB functionality. The list of steps to
+be followed in the host side and EP side is given below. For the hardware
+configuration and internals of NTB using configurable endpoints see
+Documentation/PCI/endpoint/pci-vntb-function.rst
+
+Endpoint Device
+===============
+
+Endpoint Controller Devices
+---------------------------
+
+To find the list of endpoint controller devices in the system::
+
+        # ls /sys/class/pci_epc/
+          5f010000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+        # ls /sys/kernel/config/pci_ep/controllers
+          5f010000.pcie_ep
+
+Endpoint Function Drivers
+-------------------------
+
+To find the list of endpoint function drivers in the system::
+
+	# ls /sys/bus/pci-epf/drivers
+	pci_epf_ntb  pci_epf_test  pci_epf_vntb
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+	# ls /sys/kernel/config/pci_ep/functions
+	pci_epf_ntb  pci_epf_test  pci_epf_vntb
+
+
+Creating pci-epf-vntb Device
+----------------------------
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-vntb device, the following commands can be used::
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_vntb/func1
+
+The "mkdir func1" above creates the pci-epf-ntb function device that will
+be probed by pci_epf_vntb driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields::
+
+	# ls functions/pci_epf_ntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	progif_code       secondary         subsys_id         vendorid
+	cache_line_size   interrupt_pin     msix_interrupts   primary
+	revid             subclass_code     subsys_vendor_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-vntb driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001::
+
+	# cat functions/pci_epf_vntb/func1/vendorid
+	0xffff
+	# cat functions/pci_epf_vntb/func1/interrupt_pin
+	0x0001
+
+
+Configuring pci-epf-vntb Device
+-------------------------------
+
+The user can configure the pci-epf-vntb device using its configfs entry. In order
+to change the vendorid and the deviceid, the following
+commands can be used::
+
+	# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
+	# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
+
+In order to configure NTB specific attributes, a new sub-directory to func1
+should be created::
+
+	# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
+
+The NTB function driver will populate this directory with various attributes
+that can be configured by the user::
+
+	# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
+	db_count    mw1         mw2         mw3         mw4         num_mws
+	spad_count
+
+A sample configuration for NTB function is given below::
+
+	# echo 4 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/db_count
+	# echo 128 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/spad_count
+	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
+	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
+
+A sample configuration for virtual NTB driver for virutal PCI bus::
+
+	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
+	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
+	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
+
+Binding pci-epf-ntb Device to EP Controller
+--------------------------------------------
+
+NTB function device should be attached to PCI endpoint controllers
+connected to the host.
+
+	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+
+Once the above step is completed, the PCI endpoint controllers are ready to
+establish a link with the host.
+
+
+Start the Link
+--------------
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'. For NTB, both the PCI endpoint controllers
+should establish link with the host (imx8 don't need this steps)::
+
+	# echo 1 > controllers/5f010000.pcie_ep/start
+
+RootComplex Device
+==================
+
+lspci Output at Host side
+------------------------
+
+Note that the devices listed here correspond to the values populated in
+"Creating pci-epf-ntb Device" section above::
+
+	# lspci
+        00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
+        01:00.0 RAM memory: Freescale Semiconductor Inc Device 0809
+
+Endpoint Device / Virtual PCI bus
+=================================
+
+lspci Output at EP Side / Virtual PCI bus
+-----------------------------------------
+
+Note that the devices listed here correspond to the values populated in
+"Creating pci-epf-ntb Device" section above::
+
+        # lspci
+        10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
+
+Using ntb_hw_epf Device
+-----------------------
+
+The host side software follows the standard NTB software architecture in Linux.
+All the existing client side NTB utilities like NTB Transport Client and NTB
+Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB
+function device.
+
+For more information on NTB see
+:doc:`Non-Transparent Bridge <../../driver-api/ntb>`