Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).

Signed-off-by: David S. Miller <davem@davemloft.net>

10 files changed, 82 insertions, 48 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 2ba45caabada..facc20a3f962 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1725,6 +1725,12 @@
 			kernel and module base offset ASLR (Address Space
 			Layout Randomization).
 
+	kasan_multi_shot
+			[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
+			report on every invalid memory access. Without this
+			parameter KASAN will print report only for the first
+			invalid access.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=	[KNL,X86,IA-64,PPC]
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
index 30c546900b60..07dbb358182c 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
@@ -45,7 +45,7 @@ The following clocks are available:
    - 1 15	SATA
    - 1 16	SATA USB
    - 1 17	Main
-   - 1 18	SD/MMC
+   - 1 18	SD/MMC/GOP
    - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
    - 1 22	USB3H0
    - 1 23	USB3H1
@@ -65,7 +65,7 @@ Required properties:
 	"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 	"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 	"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 	"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 
 Example:
@@ -78,6 +78,6 @@ Example:
 		gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 			"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 			"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 			"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index a78265993665..ca5204b3bc21 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -4,7 +4,6 @@ Required properties:
   - compatible: value should be one of the following
 		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index 18645e0228b0..5837402c3ade 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -11,7 +11,6 @@ Required properties:
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
 		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
index ea9c1c9607f6..520d61dad6dd 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt
@@ -13,7 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
+	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
deleted file mode 100644
index e68ae5dec9c9..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
-  of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_phy: usb-phy@10 {
-			compatible = "brcm,nsp-usb3-phy";
-			reg = <0x10>;
-			usb3-ctrl-syscon = <&usb3_ctrl>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	usb3_ctrl: syscon@104408 {
-		compatible = "brcm,nsp-usb3-ctrl", "syscon";
-		reg = <0x104408 0x3fc>;
-	};
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.txt b/Documentation/devicetree/bindings/rng/omap_rng.txt
index 471477299ece..9cf7876ab434 100644
--- a/Documentation/devicetree/bindings/rng/omap_rng.txt
+++ b/Documentation/devicetree/bindings/rng/omap_rng.txt
@@ -12,7 +12,8 @@ Required properties:
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt number for the RNG module.
 		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source
+- clocks: the trng clock source. Only mandatory for the
+  "inside-secure,safexcel-eip76" compatible.
 
 Example:
 /* AM335x */
diff --git a/Documentation/extcon/intel-int3496.txt b/Documentation/extcon/intel-int3496.txt
index af0b366c25b7..8155dbc7fad3 100644
--- a/Documentation/extcon/intel-int3496.txt
+++ b/Documentation/extcon/intel-int3496.txt
@@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg
 Index 2: The output gpio for muxing of the data pins between the USB host and
          the USB peripheral controller, write 1 to mux to the peripheral
          controller
+
+There is a mapping between indices and GPIO connection IDs as follows
+	id	index 0
+	vbus	index 1
+	mux	index 2
diff --git a/Documentation/gcc-plugins.txt b/Documentation/gcc-plugins.txt
index 891c69464434..433eaefb4aa1 100644
--- a/Documentation/gcc-plugins.txt
+++ b/Documentation/gcc-plugins.txt
@@ -18,8 +18,8 @@ because gcc versions 4.5 and 4.6 are compiled by a C compiler,
 gcc-4.7 can be compiled by a C or a C++ compiler,
 and versions 4.8+ can only be compiled by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm and arm64
-architectures.
+Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
+powerpc architectures.
 
 This infrastructure was ported from grsecurity [6] and PaX [7].
 
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 3c248f772ae6..fd106899afd1 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3377,6 +3377,69 @@ struct kvm_ppc_resize_hpt {
 	__u32 pad;
 };
 
+4.104 KVM_X86_GET_MCE_CAP_SUPPORTED
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: system ioctl
+Parameters: u64 mce_cap (out)
+Returns: 0 on success, -1 on error
+
+Returns supported MCE capabilities. The u64 mce_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register. Supported
+capabilities will have the corresponding bits set.
+
+4.105 KVM_X86_SETUP_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: u64 mcg_cap (in)
+Returns: 0 on success,
+         -EFAULT if u64 mcg_cap cannot be read,
+         -EINVAL if the requested number of banks is invalid,
+         -EINVAL if requested MCE capability is not supported.
+
+Initializes MCE support for use. The u64 mcg_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register and
+specifies which capabilities should be enabled. The maximum
+supported number of error-reporting banks can be retrieved when
+checking for KVM_CAP_MCE. The supported capabilities can be
+retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED.
+
+4.106 KVM_X86_SET_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_x86_mce (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_x86_mce cannot be read,
+         -EINVAL if the bank number is invalid,
+         -EINVAL if VAL bit is not set in status field.
+
+Inject a machine check error (MCE) into the guest. The input
+parameter is:
+
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+
+If the MCE being reported is an uncorrected error, KVM will
+inject it as an MCE exception into the guest. If the guest
+MCG_STATUS register reports that an MCE is in progress, KVM
+causes an KVM_EXIT_SHUTDOWN vmexit.
+
+Otherwise, if the MCE is a corrected error, KVM will just
+store it in the corresponding bank (provided this bank is
+not holding a previously reported uncorrected error).
+
 5. The kvm_run structure
 ------------------------