aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds2013-09-03 11:37:57 -0700
committerLinus Torvalds2013-09-03 11:37:57 -0700
commit751144271f4b63d5de9005ea4e5e6e5c7c6fd629 (patch)
tree2e5cb8223d4f6146f01f123a9f33cf6d468205c6 /Documentation
parent542a086ac72fb193cbc1b996963a572269e57743 (diff)
parent91121c103ae93ef117e58712786864270d7f488e (diff)
Merge tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree merge from Greg KH: "Here's the bit staging tree pull request for 3.12-rc1. Lots of staging driver updates, and fixes. Lustre is finally enabled in the build, and lots of cleanup started happening in it. There's a new wireless driver in here, and 2 new TTY drivers, which cause the overall lines added/removed to be quite large on the "added" side. The IIO driver updates are also coming through here, as they are tied to the staging iio drivers" * tag 'staging-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (942 commits) staging: dwc2: make dwc2_core_params documentation more complete staging: dwc2: validate the value for phy_utmi_width staging: dwc2: interpret all hwcfg and related register at init time staging: dwc2: properly mask the GRXFSIZ register staging: dwc2: remove redundant register reads staging: dwc2: re-use hptxfsiz variable staging: dwc2: simplify debug output in dwc_hc_init staging: dwc2: add missing shift staging: dwc2: simplify register shift expressions staging: dwc2: only read the snpsid register once staging: dwc2: unshift non-bool register value constants staging: dwc2: fix off-by-one in check for max_packet_count parameter staging: dwc2: remove specific fifo size constants Staging:BCM:DDRInit.c:Renaming __FUNCTION__ staging: bcm: remove Version.h file. staging: rtl8188eu: off by one in rtw_set_802_11_add_wep() staging: r8188eu: copying one byte too much staging: rtl8188eu: || vs && typo staging: r8188eu: off by one bugs staging: crystalhd: Resolve sparse 'different base types' warnings. ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio19
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-ad95238
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-adf43502
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-adc.txt7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bma180.txt24
-rw-r--r--Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt18
-rw-r--r--Documentation/devicetree/bindings/iio/light/apds9300.txt22
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--Documentation/driver-model/devres.txt6
9 files changed, 93 insertions, 14 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index dda81ffae5cf..39c8de0e53d0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -351,6 +351,7 @@ Description:
6kohm_to_gnd: connected to ground via a 6kOhm resistor,
20kohm_to_gnd: connected to ground via a 20kOhm resistor,
100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+ 500kohm_to_gnd: connected to ground via a 500kOhm resistor,
three_state: left floating.
For a list of available output power down options read
outX_powerdown_mode_available. If Y is not present the
@@ -792,3 +793,21 @@ Contact: linux-iio@vger.kernel.org
Description:
This attribute is used to read the amount of quadrature error
present in the device at a given time.
+
+What: /sys/.../iio:deviceX/in_accelX_power_mode
+KernelVersion: 3.11
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the chip power mode.
+ low_noise: reduce noise level from ADC,
+ low_power: enable low current consumption.
+ For a list of available output power modes read
+ in_accel_power_mode_available.
+
+What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Writing '1' stores the current device configuration into
+ on-chip EEPROM. After power-up or chip reset the device will
+ automatically load the saved configuration.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
index 2ce9c3f68eee..a91aeabe7b24 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
@@ -18,14 +18,6 @@ Description:
Reading returns either '1' or '0'. '1' means that the
pllY is locked.
-What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
-KernelVersion: 3.4.0
-Contact: linux-iio@vger.kernel.org
-Description:
- Writing '1' stores the current device configuration into
- on-chip EEPROM. After power-up or chip reset the device will
- automatically load the saved configuration.
-
What: /sys/bus/iio/devices/iio:deviceX/sync_dividers
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
index d89aded01c5a..1254457a726e 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
@@ -18,4 +18,4 @@ Description:
adjust the reference frequency accordingly.
The value written has no effect until out_altvoltageY_frequency
is updated. Consider to use out_altvoltageY_powerdown to power
- down the PLL and it's RFOut buffers during REFin changes.
+ down the PLL and its RFOut buffers during REFin changes.
diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt
index 16769d9cedd6..723c205cb10d 100644
--- a/Documentation/devicetree/bindings/arm/atmel-adc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt
@@ -1,18 +1,15 @@
* AT91's Analog to Digital Converter (ADC)
Required properties:
- - compatible: Should be "atmel,at91sam9260-adc"
+ - compatible: Should be "atmel,<chip>-adc"
+ <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
- reg: Should contain ADC registers location and length
- interrupts: Should contain the IRQ line for the ADC
- - atmel,adc-channel-base: Offset of the first channel data register
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
device
- - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
- atmel,adc-num-channels: Number of channels available in the ADC
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
defined in the datasheet
- - atmel,adc-status-register: Offset of the Interrupt Status Register
- - atmel,adc-trigger-register: Offset of the Trigger Register
- atmel,adc-vref: Reference voltage in millivolts for the conversions
- atmel,adc-res: List of resolution in bits supported by the ADC. List size
must be two at least.
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
new file mode 100644
index 000000000000..c5933573e0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -0,0 +1,24 @@
+* Bosch BMA180 triaxial acceleration sensor
+
+http://omapworld.com/BMA180_111_1002839.pdf
+
+Required properties:
+
+ - compatible : should be "bosch,bma180"
+ - reg : the I2C address of the sensor
+
+Optional properties:
+
+ - interrupt-parent : should be the phandle for the interrupt controller
+
+ - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+ flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bma180@40 {
+ compatible = "bosch,bma180";
+ reg = <0x40>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
new file mode 100644
index 000000000000..e9582e6fe350
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt
@@ -0,0 +1,18 @@
+* Nuvoton NAU7802 Analog to Digital Converter (ADC)
+
+Required properties:
+ - compatible: Should be "nuvoton,nau7802"
+ - reg: Should contain the ADC I2C address
+
+Optional properties:
+ - nuvoton,vldo: Internal reference voltage in millivolts to be
+ configured valid values are between 2400 mV and 4500 mV.
+ - interrupts: IRQ line for the ADC. If not used the driver will use
+ polling.
+
+Example:
+adc2: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
new file mode 100644
index 000000000000..d6f66c73ddbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -0,0 +1,22 @@
+* Avago APDS9300 ambient light sensor
+
+http://www.avagotech.com/docs/AV02-1077EN
+
+Required properties:
+
+ - compatible : should be "avago,apds9300"
+ - reg : the I2C address of the sensor
+
+Optional properties:
+
+ - interrupt-parent : should be the phandle for the interrupt controller
+ - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+
+apds9300@39 {
+ compatible = "avago,apds9300";
+ reg = <0x39>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 8>;
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 366ce9b87240..ec4d713674fa 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -11,6 +11,7 @@ amcc Applied Micro Circuits Corporation (APM, formally AMCC)
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
atmel Atmel Corporation
+avago Avago Technologies
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
cavium Cavium, Inc.
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index b4671459857f..fb57d85e7316 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -237,6 +237,12 @@ MEM
devm_kzalloc()
devm_kfree()
+IIO
+ devm_iio_device_alloc()
+ devm_iio_device_free()
+ devm_iio_trigger_alloc()
+ devm_iio_trigger_free()
+
IO region
devm_request_region()
devm_request_mem_region()