diff options
| author | Jean-Christophe PLAGNIOL-VILLARD | 2013-06-14 17:52:18 +0800 |
|---|---|---|
| committer | Jean-Christophe PLAGNIOL-VILLARD | 2013-06-14 17:52:18 +0800 |
| commit | 8ea2c86449bdf0fe32fd043c714054962d8802ca (patch) | |
| tree | 494b62a20f8e3203a7e1a55be3d68f41eae29306 /Documentation | |
| parent | 317ddd256b9c24b0d78fa8018f80f1e495481a10 (diff) | |
| parent | ffa3fd21de8ab0db7962b612d4c6e17c0d88e9c2 (diff) | |
Merge branch 'fbdev-3.11' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/video/ssd1307fb.txt | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Documentation/devicetree/bindings/video/ssd1307fb.txt index 3d0060cff062..7a125427ff4b 100644 --- a/Documentation/devicetree/bindings/video/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt @@ -1,13 +1,17 @@ * Solomon SSD1307 Framebuffer Driver Required properties: - - compatible: Should be "solomon,ssd1307fb-<bus>". The only supported bus for - now is i2c. + - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for + now is i2c, and the supported chips are ssd1306 and ssd1307. - reg: Should contain address of the controller on the I2C bus. Most likely 0x3c or 0x3d - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0] + specification [0]. Only required for the ssd1307. - reset-gpios: Should contain the GPIO used to reset the OLED display + - solomon,height: Height in pixel of the screen driven by the controller + - solomon,width: Width in pixel of the screen driven by the controller + - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is + mapped to. Optional properties: - reset-active-low: Is the reset gpio is active on physical low? |