Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.

Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
  to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
  zpos in plane state reset, removing the need for individual drivers
  to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.

Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com

2 files changed, 162 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..f29789994b18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+    - Vddi: Logic level supply for interface signals
+    Combined into one in this binding called: power-supply
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sainsmart18
+      - const: panel-mipi-dbi-spi
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+required:
+  - compatible
+  - reg
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 7bf7f2111696..127e76ee0b2d 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -241,6 +241,28 @@ Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter
 
 Level: Advanced
 
+Benchmark and optimize blitting and format-conversion function
+--------------------------------------------------------------
+
+Drawing to dispay memory quickly is crucial for many applications'
+performance.
+
+On at least x86-64, sys_imageblit() is significantly slower than
+cfb_imageblit(), even though both use the same blitting algorithm and
+the latter is written for I/O memory. It turns out that cfb_imageblit()
+uses movl instructions, while sys_imageblit apparently does not. This
+seems to be a problem with gcc's optimizer. DRM's format-conversion
+helpers might be subject to similar issues.
+
+Benchmark and optimize fbdev's sys_() helpers and DRM's format-conversion
+helpers. In cases that can be further optimized, maybe implement a different
+algorithm. For micro-optimizations, use movl/movq instructions explicitly.
+That might possibly require architecture-specific helpers (e.g., storel()
+storeq()).
+
+Contact: Thomas Zimmermann <tzimmermann@suse.de>
+
+Level: Intermediate
 
 drm_framebuffer_funcs and drm_mode_config_funcs.fb_create cleanup
 -----------------------------------------------------------------
@@ -475,8 +497,12 @@ This is a really varied tasks with lots of little bits and pieces:
   achieved by using an IPI to the local processor.
 
 * There's a massive confusion of different panic handlers. DRM fbdev emulation
-  helpers have one, but on top of that the fbcon code itself also has one. We
-  need to make sure that they stop fighting over each another.
+  helpers had their own (long removed), but on top of that the fbcon code itself
+  also has one. We need to make sure that they stop fighting over each other.
+  This is worked around by checking ``oops_in_progress`` at various entry points
+  into the DRM fbdev emulation helpers. A much cleaner approach here would be to
+  switch fbcon to the `threaded printk support
+  <https://lwn.net/Articles/800946/>`_.
 
 * ``drm_can_sleep()`` is a mess. It hides real bugs in normal operations and
   isn't a full solution for panic paths. We need to make sure that it only
@@ -488,16 +514,15 @@ This is a really varied tasks with lots of little bits and pieces:
   even spinlocks (because NMI and hardirq can panic too). We need to either
   make sure to not call such paths, or trylock everything. Really tricky.
 
-* For the above locking troubles reasons it's pretty much impossible to
-  attempt a synchronous modeset from panic handlers. The only thing we could
-  try to achive is an atomic ``set_base`` of the primary plane, and hope that
-  it shows up. Everything else probably needs to be delayed to some worker or
-  something else which happens later on. Otherwise it just kills the box
-  harder, prevent the panic from going out on e.g. netconsole.
+* A clean solution would be an entirely separate panic output support in KMS,
+  bypassing the current fbcon support. See `[PATCH v2 0/3] drm: Add panic handling
+  <https://lore.kernel.org/dri-devel/20190311174218.51899-1-noralf@tronnes.org/>`_.
 
-* There's also proposal for a simplied DRM console instead of the full-blown
-  fbcon and DRM fbdev emulation. Any kind of panic handling tricks should
-  obviously work for both console, in case we ever get kmslog merged.
+* Encoding the actual oops and preceding dmesg in a QR might help with the
+  dread "important stuff scrolled away" problem. See `[RFC][PATCH] Oops messages
+  transfer using QR codes
+  <https://lore.kernel.org/lkml/1446217392-11981-1-git-send-email-alexandru.murtaza@intel.com/>`_
+  for some example code that could be reused.
 
 Contact: Daniel Vetter