Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto update from Herbert Xu:
 "API:

   - Add support for cipher output IVs in testmgr
   - Add missing crypto_ahash_blocksize helper
   - Mark authenc and des ciphers as not allowed under FIPS.

Algorithms:

   - Add CRC support to 842 compression
   - Add keywrap algorithm
   - A number of changes to the akcipher interface:
      + Separate functions for setting public/private keys.
      + Use SG lists.

Drivers:

   - Add Intel SHA Extension optimised SHA1 and SHA256
   - Use dma_map_sg instead of custom functions in crypto drivers
   - Add support for STM32 RNG
   - Add support for ST RNG
   - Add Device Tree support to exynos RNG driver
   - Add support for mxs-dcp crypto device on MX6SL
   - Add xts(aes) support to caam
   - Add ctr(aes) and xts(aes) support to qat
   - A large set of fixes from Russell King for the marvell/cesa driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (115 commits)
  crypto: asymmetric_keys - Fix unaligned access in x509_get_sig_params()
  crypto: akcipher - Don't #include crypto/public_key.h as the contents aren't used
  hwrng: exynos - Add Device Tree support
  hwrng: exynos - Fix missing configuration after suspend to RAM
  hwrng: exynos - Add timeout for waiting on init done
  dt-bindings: rng: Describe Exynos4 PRNG bindings
  crypto: marvell/cesa - use __le32 for hardware descriptors
  crypto: marvell/cesa - fix missing cpu_to_le32() in mv_cesa_dma_add_op()
  crypto: marvell/cesa - use memcpy_fromio()/memcpy_toio()
  crypto: marvell/cesa - use gfp_t for gfp flags
  crypto: marvell/cesa - use dma_addr_t for cur_dma
  crypto: marvell/cesa - use readl_relaxed()/writel_relaxed()
  crypto: caam - fix indentation of close braces
  crypto: caam - only export the state we really need to export
  crypto: caam - fix non-block aligned hash calculation
  crypto: caam - avoid needlessly saving and restoring caam_hash_ctx
  crypto: caam - print errno code when hash registration fails
  crypto: marvell/cesa - fix memory leak
  crypto: marvell/cesa - fix first-fragment handling in mv_cesa_ahash_dma_last_req()
  crypto: marvell/cesa - rearrange handling for sw padded hashes
  ...

4 files changed, 57 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
new file mode 100644
index 000000000000..4ca8dd4d7e66
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
@@ -0,0 +1,17 @@
+Exynos Pseudo Random Number Generator
+
+Required properties:
+
+- compatible  : Should be "samsung,exynos4-rng".
+- reg         : Specifies base physical address and size of the registers map.
+- clocks      : Phandle to clock-controller plus clock-specifier pair.
+- clock-names : "secss" as a clock name.
+
+Example:
+
+	rng@10830400 {
+		compatible = "samsung,exynos4-rng";
+		reg = <0x10830400 0x200>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
diff --git a/Documentation/devicetree/bindings/rng/st,rng.txt b/Documentation/devicetree/bindings/rng/st,rng.txt
new file mode 100644
index 000000000000..35734bc282e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,rng.txt
@@ -0,0 +1,15 @@
+STMicroelectronics HW Random Number Generator
+----------------------------------------------
+
+Required parameters:
+compatible	: Should be "st,rng"
+reg		: Base address and size of IP's register map.
+clocks		: Phandle to device's clock (See: ../clocks/clock-bindings.txt)
+
+Example:
+
+rng@fee80000 {
+	compatible      = "st,rng";
+	reg		= <0xfee80000 0x1000>;
+	clocks          = <&clk_sysin>;
+}
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.txt b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
new file mode 100644
index 000000000000..47f04176f93b
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
@@ -0,0 +1,21 @@
+STMicroelectronics STM32 HW RNG
+===============================
+
+The STM32 hardware random number generator is a simple fixed purpose IP and
+is fully separated from other crypto functions.
+
+Required properties:
+
+- compatible : Should be "st,stm32-rng"
+- reg : Should be register base and length as documented in the datasheet
+- interrupts : The designated IRQ line for the RNG
+- clocks : The clock needed to enable the RNG
+
+Example:
+
+	rng: rng@50060800 {
+		compatible = "st,stm32-rng";
+		reg = <0x50060800 0x400>;
+		interrupts = <80>;
+		clocks = <&rcc 0 38>;
+	};
diff --git a/Documentation/hw_random.txt b/Documentation/hw_random.txt
index 026e237bbc87..fce1634907d0 100644
--- a/Documentation/hw_random.txt
+++ b/Documentation/hw_random.txt
@@ -3,7 +3,7 @@ Introduction:
 	The hw_random framework is software that makes use of a
 	special hardware feature on your CPU or motherboard,
 	a Random Number Generator (RNG).  The software has two parts:
-	a core providing the /dev/hw_random character device and its
+	a core providing the /dev/hwrng character device and its
 	sysfs support, plus a hardware-specific driver that plugs
 	into that core.
 
@@ -14,7 +14,7 @@ Introduction:
 
 		http://sourceforge.net/projects/gkernel/
 
-	Those tools use /dev/hw_random to fill the kernel entropy pool,
+	Those tools use /dev/hwrng to fill the kernel entropy pool,
 	which is used internally and exported by the /dev/urandom and
 	/dev/random special files.
 
@@ -32,13 +32,13 @@ Theory of operation:
 	The rng-tools package uses such tests in "rngd", and lets you
 	run them by hand with a "rngtest" utility.
 
-	/dev/hw_random is char device major 10, minor 183.
+	/dev/hwrng is char device major 10, minor 183.
 
 	CLASS DEVICE.  There is a /sys/class/misc/hw_random node with
 	two unique attributes, "rng_available" and "rng_current".  The
 	"rng_available" attribute lists the hardware-specific drivers
 	available, while "rng_current" lists the one which is currently
-	connected to /dev/hw_random.  If your system has more than one
+	connected to /dev/hwrng.  If your system has more than one
 	RNG available, you may change the one used by writing a name from
 	the list in "rng_available" into "rng_current".