Merge tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The big change in this release is that Matti Vaittinen has factored
  out the linear ranges support into a separate library in lib/ since it
  is also useful for at least the power subsystem (and most likely
  others too), it helps subsystems which need to map register values
  into more useful real world values do so with minimal per-driver code.

   - Factoring out of the linear ranges support into a library in lib/
     from Matti Vaittinen.

   - Trace points for bypass mode.

   - Use the consumer name in debugfs to make it easier to understand.

   - New drivers for Maxim MAX77826 and MAX8998"

* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
  regulator: max8998: max8998_set_current_limit() can be static
  dt-bindings: regulator: Convert anatop regulator to json-schema
  regulator: core: Add regulator bypass trace points
  regulator: extract voltage balancing code to the separate function
  regulator/mfd: max8998: Document charger regulator
  regulator: max8998: Add charger regulator
  MAINTAINERS: Add maintainer entry for linear ranges helper
  regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
  lib: linear_ranges: Add missing MODULE_LICENSE()
  regulator: use linear_ranges helper
  power: supply: bd70528: rename linear_range to avoid collision
  lib/test_linear_ranges: add a test for the 'linear_ranges'
  lib: add linear ranges helpers
  regulator: db8500-prcmu: Use true,false for bool variable
  regulator: bd718x7: remove voltage change restriction from BD71847
  regulator: max77826: Remove erroneous additionalProperties
  regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
  regulator: Document bindings for max77826
  regulator: max77826: Add max77826 regulator driver
  regulator: tps80031: remove redundant assignment to variables ret and val
  ...

4 files changed, 170 insertions, 40 deletions

diff --git a/Documentation/devicetree/bindings/mfd/max8998.txt b/Documentation/devicetree/bindings/mfd/max8998.txt
index 5f2f07c09c90..4ed52184d081 100644
--- a/Documentation/devicetree/bindings/mfd/max8998.txt
+++ b/Documentation/devicetree/bindings/mfd/max8998.txt
@@ -73,6 +73,8 @@ number as described in MAX8998 datasheet.
 	- ESAFEOUT1: (ldo19)
 	- ESAFEOUT2: (ld020)
 
+	- CHARGER: main battery charger current control
+
 Standard regulator bindings are used inside regulator subnodes. Check
   Documentation/devicetree/bindings/regulator/regulator.txt
 for more details.
@@ -113,5 +115,11 @@ Example:
 				regulator-always-on;
 				regulator-boot-on;
 			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <90000>;
+				regulator-max-microamp = <800000>;
+			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
deleted file mode 100644
index a3106c72fbea..000000000000
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Anatop Voltage regulators
-
-Required properties:
-- compatible: Must be "fsl,anatop-regulator"
-- regulator-name: A string used as a descriptive name for regulator outputs
-- anatop-reg-offset: Anatop MFD register offset
-- anatop-vol-bit-shift: Bit shift for the register
-- anatop-vol-bit-width: Number of bits used in the register
-- anatop-min-bit-val: Minimum value of this register
-- anatop-min-voltage: Minimum voltage of this regulator
-- anatop-max-voltage: Maximum voltage of this regulator
-
-Optional properties:
-- anatop-delay-reg-offset: Anatop MFD step time register offset
-- anatop-delay-bit-shift: Bit shift for the step time register
-- anatop-delay-bit-width: Number of bits used in the step time register
-- vin-supply: The supply for this regulator
-- anatop-enable-bit: Regulator enable bit offset
-
-Any property defined as part of the core regulator
-binding, defined in regulator.txt, can also be used.
-
-Example:
-
-	regulator-vddpu {
-		compatible = "fsl,anatop-regulator";
-		regulator-name = "vddpu";
-		regulator-min-microvolt = <725000>;
-		regulator-max-microvolt = <1300000>;
-		regulator-always-on;
-		anatop-reg-offset = <0x140>;
-		anatop-vol-bit-shift = <9>;
-		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
-		anatop-min-bit-val = <1>;
-		anatop-min-voltage = <725000>;
-		anatop-max-voltage = <1300000>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
new file mode 100644
index 000000000000..e7b3abe30363
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Anatop Voltage Regulators
+
+maintainers:
+  - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: fsl,anatop-regulator
+
+  regulator-name: true
+
+  anatop-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD register offset.
+
+  anatop-vol-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the register.
+
+  anatop-vol-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the register.
+
+  anatop-min-bit-val:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum value of this register.
+
+  anatop-min-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the minimum voltage of this regulator.
+
+  anatop-max-voltage:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the maximum voltage of this regulator.
+
+  anatop-delay-reg-offset:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the anatop MFD step time register offset.
+
+  anatop-delay-bit-shift:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the bit shift for the step time register.
+
+  anatop-delay-bit-width:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing the number of bits used in the step time register.
+
+  anatop-enable-bit:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: u32 value representing regulator enable bit offset.
+
+  vin-supply:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: input supply phandle.
+
+required:
+  - compatible
+  - regulator-name
+  - anatop-reg-offset
+  - anatop-vol-bit-shift
+  - anatop-vol-bit-width
+  - anatop-min-bit-val
+  - anatop-min-voltage
+  - anatop-max-voltage
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulator-vddpu {
+        compatible = "fsl,anatop-regulator";
+        regulator-name = "vddpu";
+        regulator-min-microvolt = <725000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-always-on;
+        anatop-reg-offset = <0x140>;
+        anatop-vol-bit-shift = <9>;
+        anatop-vol-bit-width = <5>;
+        anatop-delay-reg-offset = <0x170>;
+        anatop-delay-bit-shift = <24>;
+        anatop-delay-bit-width = <2>;
+        anatop-min-bit-val = <1>;
+        anatop-min-voltage = <725000>;
+        anatop-max-voltage = <1300000>;
+    };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
new file mode 100644
index 000000000000..19cbd5eb2897
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77826 PMIC
+
+maintainers:
+  - Iskren Chernev <iskren.chernev@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - maxim,max77826
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST
+
+    patternProperties:
+      "^LDO([1-9]|1[0-5])$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^BUCK|BUCKBOOST$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "maxim,max77826";
+            reg = <0x69>;
+
+            regulators {
+                LDO2 {
+                    regulator-min-microvolt = <650000>;
+                    regulator-max-microvolt = <3587500>;
+                };
+            };
+       };
+     };
+...