Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.15.

  Core:
   - Atomic object lifetime fixes
   - Atomic iterator improvements
   - Sparse/smatch fixes
   - Legacy kms ioctls to be interruptible
   - EDID override improvements
   - fb/gem helper cleanups
   - Simple outreachy patches
   - Documentation improvements
   - Fix dma-buf rcu races
   - DRM mode object leasing for improving VR use cases.
   - vgaarb improvements for non-x86 platforms.

  New driver:
   - tve200: Faraday Technology TVE200 block.

     This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
     the StorLink SL3516 (later Cortina Systems CS3516) as well as the
     Grain Media GM8180.

  New bridges:
   - SiI9234 support

  New panels:
   - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
     LT089AC19000, Innolux AT043TN24

  i915:
   - Remove Coffeelake from alpha support
   - Cannonlake workarounds
   - Infoframe refactoring for DisplayPort
   - VBT updates
   - DisplayPort vswing/emph/buffer translation refactoring
   - CCS fixes
   - Restore GPU clock boost on missed vblanks
   - Scatter list updates for userptr allocations
   - Gen9+ transition watermarks
   - Display IPC (Isochronous Priority Control)
   - Private PAT management
   - GVT: improved error handling and pci config sanitizing
   - Execlist refactoring
   - Transparent Huge Page support
   - User defined priorities support
   - HuC/GuC firmware refactoring
   - DP MST fixes
   - eDP power sequencing fixes
   - Use RCU instead of stop_machine
   - PSR state tracking support
   - Eviction fixes
   - BDW DP aux channel timeout fixes
   - LSPCON fixes
   - Cannonlake PLL fixes

  amdgpu:
   - Per VM BO support
   - Powerplay cleanups
   - CI powerplay support
   - PASID mgr for kfd
   - SR-IOV fixes
   - initial GPU reset for vega10
   - Prime mmap support
   - TTM updates
   - Clock query interface for Raven
   - Fence to handle ioctl
   - UVD encode ring support on Polaris
   - Transparent huge page DMA support
   - Compute LRU pipe tweaks
   - BO flag to allow buffers to opt out of implicit sync
   - CTX priority setting API
   - VRAM lost infrastructure plumbing

  qxl:
   - fix flicker since atomic rework

  amdkfd:
   - Further improvements from internal AMD tree
   - Usermode events
   - Drop radeon support

  nouveau:
   - Pascal temperature sensor support
   - Improved BAR2 handling
   - MMU rework to support Pascal MMU

  exynos:
   - Improved HDMI/mixer support
   - HDMI audio interface support

  tegra:
   - Prep work for tegra186
   - Cleanup/fixes

  msm:
   - Preemption support for a5xx
   - Display fixes for 8x96 (snapdragon 820)
   - Async cursor plane fixes
   - FW loading rework
   - GPU debugging improvements

  vc4:
   - Prep for DSI panels
   - fix T-format tiling scanout
   - New madvise ioctl

  Rockchip:
   - LVDS support

  omapdrm:
   - omap4 HDMI CEC support

  etnaviv:
   - GPU performance counters groundwork

  sun4i:
   - refactor driver load + TCON backend
   - HDMI improvements
   - A31 support
   - Misc fixes

  udl:
   - Probe/EDID read fixes.

  tilcdc:
   - Misc fixes.

  pl111:
   - Support more variants

  adv7511:
   - Improve EDID handling.
   - HDMI CEC support

  sii8620:
   - Add remote control support"

* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
  drm/rockchip: analogix_dp: Use mutex rather than spinlock
  drm/mode_object: fix documentation for object lookups.
  drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
  drm/i915: Move init_clock_gating() back to where it was
  drm/i915: Prune the reservation shared fence array
  drm/i915: Idle the GPU before shinking everything
  drm/i915: Lock llist_del_first() vs llist_del_all()
  drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
  drm/i915: Disable lazy PPGTT page table optimization for vGPU
  drm/i915/execlists: Remove the priority "optimisation"
  drm/i915: Filter out spurious execlists context-switch interrupts
  drm/amdgpu: use irq-safe lock for kiq->ring_lock
  drm/amdgpu: bypass lru touch for KIQ ring submission
  drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
  drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
  drm/amd/powerplay: initialize a variable before using it
  drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
  drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
  drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
  drm/rockchip: add CONFIG_OF dependency for lvds
  ...

21 files changed, 496 insertions, 67 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 00bb04972612..5ab1089d1422 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -857,7 +857,7 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
-	drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
+	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
 			Broken monitors, graphic adapters, KVMs and EDIDless
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 06668bca7ffc..0047b1394c70 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -68,6 +68,8 @@ Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- clocks: from common clock binding: reference to the CEC clock.
+- clock-names: from common clock binding: must be "cec".
 
 Required nodes:
 
@@ -89,6 +91,8 @@ Example
 		reg = <39>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
new file mode 100644
index 000000000000..88041ba23d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -0,0 +1,49 @@
+Silicon Image SiI9234 HDMI/MHL bridge bindings
+
+Required properties:
+	- compatible : "sil,sii9234".
+	- reg : I2C address for TPI interface, use 0x39
+	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
+	- iovcc18-supply : I/O Supply Voltage (1.8V)
+	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
+	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
+	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- reset-gpios: gpio specifier of RESET pin (active low)
+	- video interfaces: Device node can contain two video interface port
+			    nodes for HDMI encoder and connector according to [1].
+			    - port@0 - MHL to HDMI
+			    - port@1 - MHL to connector
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+
+Example:
+	sii9234@39 {
+		compatible = "sil,sii9234";
+		reg = <0x39>;
+		avcc33-supply = <&vcc33mhl>;
+		iovcc18-supply = <&vcc18mhl>;
+		avcc12-supply = <&vsil12>;
+		cvcc12-supply = <&vsil12>;
+		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpf3>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				mhl_to_connector: endpoint {
+					remote-endpoint = <&connector_to_mhl>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..82e3bc0b7485
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,54 @@
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+	This port should have the properties:
+	reg = <0>;
+	It should have one endpoint connected to a remote endpoint where
+	the display is connected.
+
+Example:
+
+display-controller@6a000000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+
+	port@0 {
+		reg = <0>;
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index fa00e62e1cf6..a6671bd2c85a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -13,16 +13,16 @@ Required properties:
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks.
 - clock-names: the following clocks are required:
-  * "mdp_core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "core_mmss_clk"
-  * "byte_clk"
-  * "pixel_clk"
-  * "core_clk"
+  * "mdp_core"
+  * "iface"
+  * "bus"
+  * "core_mmss"
+  * "byte"
+  * "pixel"
+  * "core"
   For DSIv2, we need an additional clock:
-   * "src_clk"
-- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform.
+   * "src"
+- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
 - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
   by a DSI PHY block. See [1] for details on clock bindings.
 - vdd-supply: phandle to vdd regulator device node
@@ -101,7 +101,7 @@ Required properties:
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: Phandles to device clocks. See [1] for details on clock bindings.
 - clock-names: the following clocks are required:
-  * "iface_clk"
+  * "iface"
 - vddio-supply: phandle to vdd-io regulator device node
 
 Optional properties:
@@ -123,13 +123,13 @@ Example:
 		reg = <0xfd922800 0x200>;
 		power-domains = <&mmcc MDSS_GDSC>;
 		clock-names =
-			"bus_clk",
-			"byte_clk",
-			"core_clk",
-			"core_mmss_clk",
-			"iface_clk",
-			"mdp_core_clk",
-			"pixel_clk";
+			"bus",
+			"byte",
+			"core",
+			"core_mmss",
+			"iface",
+			"mdp_core",
+			"pixel";
 		clocks =
 			<&mmcc MDSS_AXI_CLK>,
 			<&mmcc MDSS_BYTE0_CLK>,
@@ -207,7 +207,7 @@ Example:
 		reg =   <0xfd922a00 0xd4>,
 			<0xfd922b00 0x2b0>,
 			<0xfd922d80 0x7b>;
-		clock-names = "iface_clk";
+		clock-names = "iface";
 		clocks = <&mmcc MDSS_AHB_CLK>;
 		#clock-cells = <1>;
 		vddio-supply = <&pma8084_l12>;
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index e63032be5401..95ce19ca7bc5 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -12,11 +12,11 @@ Required properties:
 - clocks: device clocks
   See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "mdp_core_clk"
-  * "pixel_clk"
-  * "link_clk"
+  * "core"
+  * "iface"
+  * "mdp_core"
+  * "pixel"
+  * "link"
 - #clock-cells: The value should be 1.
 - vdda-supply: phandle to vdda regulator device node
 - lvl-vdd-supply: phandle to regulator device node which is used to supply power
@@ -41,11 +41,11 @@ Example:
 			interrupts = <12 0>;
 			power-domains = <&mmcc MDSS_GDSC>;
 			clock-names =
-				"core_clk",
-				"pixel_clk",
-				"iface_clk",
-				"link_clk",
-				"mdp_core_clk";
+				"core",
+				"pixel",
+				"iface",
+				"link",
+				"mdp_core";
 			clocks =
 				<&mmcc MDSS_EDPAUX_CLK>,
 				<&mmcc MDSS_EDPPIXEL_CLK>,
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 2d306f402d18..5f90a40da51b 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -64,9 +64,9 @@ Example:
 		interrupts = <GIC_SPI 79 0>;
 		power-domains = <&mmcc MDSS_GDSC>;
 		clock-names =
-		    "core_clk",
-		    "master_iface_clk",
-		    "slave_iface_clk";
+		    "core",
+		    "master_iface",
+		    "slave_iface";
 		clocks =
 		    <&mmcc HDMI_APP_CLK>,
 		    <&mmcc HDMI_M_AHB_CLK>,
@@ -92,7 +92,7 @@ Example:
 		      <0x4a00500 0x100>;
 		#phy-cells = <0>;
 		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface_clk";
+		clock-names = "slave_iface";
 		clocks = <&mmcc HDMI_S_AHB_CLK>;
 		core-vdda-supply = <&pm8921_hdmi_mvs>;
 	};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
index 30c11ea83754..1b31977a68ba 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt
@@ -22,16 +22,16 @@ Required properties:
   Documentation/devicetree/bindings/power/power_domain.txt
 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required.
-  * "iface_clk"
-  * "bus_clk"
-  * "vsync_clk"
+  * "iface"
+  * "bus"
+  * "vsync"
 - #address-cells: number of address cells for the MDSS children. Should be 1.
 - #size-cells: Should be 1.
 - ranges: parent bus address space is the same as the child bus address space.
 
 Optional properties:
 - clock-names: the following clocks are optional:
-  * "lut_clk"
+  * "lut"
 
 MDP5:
 Required properties:
@@ -45,10 +45,10 @@ Required properties:
   through MDP block
 - clocks: device clocks. See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required.
--   * "bus_clk"
--   * "iface_clk"
--   * "core_clk"
--   * "vsync_clk"
+-   * "bus"
+-   * "iface"
+-   * "core"
+-   * "vsync"
 - ports: contains the list of output ports from MDP. These connect to interfaces
   that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
   special case since it is a part of the MDP block itself).
@@ -77,7 +77,7 @@ Required properties:
 
 Optional properties:
 - clock-names: the following clocks are optional:
-  * "lut_clk"
+  * "lut"
 
 Example:
 
@@ -95,9 +95,9 @@ Example:
 		clocks = <&gcc GCC_MDSS_AHB_CLK>,
 			 <&gcc GCC_MDSS_AXI_CLK>,
 			 <&gcc GCC_MDSS_VSYNC_CLK>;
-		clock-names = "iface_clk",
-			      "bus_clk",
-			      "vsync_clk"
+		clock-names = "iface",
+			      "bus",
+			      "vsync"
 
 		interrupts = <0 72 0>;
 
@@ -120,10 +120,10 @@ Example:
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_MDP_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface_clk",
-				      "bus_clk",
-				      "core_clk",
-				      "vsync_clk";
+			clock-names = "iface",
+				      "bus",
+				      "core",
+				      "vsync";
 
 			ports {
 				#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
new file mode 100644
index 000000000000..6862028e7b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -0,0 +1,21 @@
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+  - compatible: "orisetech,otm8009a"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
new file mode 100644
index 000000000000..e9e19c059260
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
@@ -0,0 +1,49 @@
+This binding covers the official 7" (800x480) Raspberry Pi touchscreen
+panel.
+
+This DSI panel contains:
+
+- TC358762 DSI->DPI bridge
+- Atmel microcontroller on I2C for power sequencing the DSI bridge and
+  controlling backlight
+- Touchscreen controller on I2C for touch input
+
+and this binding covers the DSI display parts but not its touch input.
+
+Required properties:
+- compatible:	Must be "raspberrypi,7inch-touchscreen-panel"
+- reg:		Must be "45"
+- port:		See panel-common.txt
+
+Example:
+
+dsi1: dsi@7e700000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	<...>
+
+	port {
+		dsi_out_port: endpoint {
+			remote-endpoint = <&panel_dsi_port>;
+		};
+	};
+};
+
+i2c_dsi: i2c {
+	compatible = "i2c-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&gpio 28 0
+		 &gpio 29 0>;
+
+	lcd@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel";
+		reg = <0x45>;
+
+		port {
+			panel_dsi_port: endpoint {
+				remote-endpoint = <&dsi_out_port>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
new file mode 100644
index 000000000000..3f1a8392af7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
@@ -0,0 +1,24 @@
+Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
+
+Required properties:
+  - compatible: "samsung,s6e63j0x03"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
new file mode 100644
index 000000000000..aae57ef36cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
@@ -0,0 +1,23 @@
+Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+Required properties:
+- compatible: should be "sii,43wvf1g".
+- "dvdd-supply": 3v3 digital regulator.
+- "avdd-supply": 5v analog regulator.
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+Example:
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
new file mode 100644
index 000000000000..4c0caaf246c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt
@@ -0,0 +1,8 @@
+Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "toshiba,lt089ac29000.txt"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
new file mode 100644
index 000000000000..da6939efdb43
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
@@ -0,0 +1,99 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+	- "rockchip,rk3288-lvds";
+
+- reg: physical base address of the controller and length
+	of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+	clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+	Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+the lvds panel described by
+	Documentation/devicetree/bindings/display/panel/simple-panel.txt
+
+Panel required properties:
+- ports for remote LVDS output
+
+Panel optional properties:
+- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
+This describes decribed by:
+	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+
+Example:
+
+lvds_panel: lvds-panel {
+	compatible = "auo,b101ean01";
+	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	data-mapping = "jeida-24";
+
+	ports {
+		panel_in_lvds: endpoint {
+			remote-endpoint = <&lvds_out_panel>;
+		};
+	};
+};
+
+For Rockchip RK3288:
+
+	lvds: lvds@ff96c000 {
+		compatible = "rockchip,rk3288-lvds";
+		rockchip,grf = <&grf>;
+		reg = <0xff96c000 0x4000>;
+		clocks = <&cru PCLK_LVDS_PHY>;
+		clock-names = "pclk_lvds";
+		pinctrl-names = "lcdc";
+		pinctrl-0 = <&lcdc_ctl>;
+		avdd1v0-supply = <&vdd10_lcd>;
+		avdd1v8-supply = <&vcc18_lcd>;
+		avdd3v3-supply = <&vcca_33>;
+		rockchip,output = "rgb";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lvds_in: port@0 {
+				reg = <0>;
+
+				lvds_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+				lvds_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b7faa6f6a326..50cc72ee1168 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -40,15 +40,19 @@ CEC. It is one end of the pipeline.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun4i-a10-hdmi
     * allwinner,sun5i-a10s-hdmi
+    * allwinner,sun6i-a31-hdmi
   - reg: base address and size of memory-mapped region
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the HDMI encoder
     * ahb: the HDMI interface clock
     * mod: the HDMI module clock
+    * ddc: the HDMI ddc clock (A31 only)
     * pll-0: the first video PLL
     * pll-1: the second video PLL
   - clock-names: the clock names mentioned above
+  - resets: phandle to the reset control for the HDMI encoder (A31 only)
   - dmas: phandles to the DMA channels used by the HDMI encoder
     * ddc-tx: The channel for DDC transmission
     * ddc-rx: The channel for DDC reception
@@ -83,9 +87,11 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
 
 Required properties:
  - compatible: value must be either:
+   * allwinner,sun4i-a10-tcon
    * allwinner,sun5i-a13-tcon
    * allwinner,sun6i-a31-tcon
    * allwinner,sun6i-a31s-tcon
+   * allwinner,sun7i-a20-tcon
    * allwinner,sun8i-a33-tcon
    * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
@@ -150,8 +156,10 @@ system.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun4i-a10-display-backend
     * allwinner,sun5i-a13-display-backend
     * allwinner,sun6i-a31-display-backend
+    * allwinner,sun7i-a20-display-backend
     * allwinner,sun8i-a33-display-backend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
@@ -182,8 +190,10 @@ deinterlacing and color space conversion.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun4i-a10-display-frontend
     * allwinner,sun5i-a13-display-frontend
     * allwinner,sun6i-a31-display-frontend
+    * allwinner,sun7i-a20-display-frontend
     * allwinner,sun8i-a33-display-frontend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
@@ -228,10 +238,12 @@ extra node.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun4i-a10-display-engine
     * allwinner,sun5i-a10s-display-engine
     * allwinner,sun5i-a13-display-engine
     * allwinner,sun6i-a31-display-engine
     * allwinner,sun6i-a31s-display-engine
+    * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
     * allwinner,sun8i-v3s-display-engine
 
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 74e1e8add5a1..844e0103fb0d 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -3,6 +3,10 @@ NVIDIA Tegra host1x
 Required properties:
 - compatible: "nvidia,tegra<chip>-host1x"
 - reg: Physical base address and length of the controller's registers.
+  For pre-Tegra186, one entry describing the whole register area.
+  For Tegra186, one entry for each entry in reg-names:
+    "vm" - VM region assigned to Linux
+    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
 - interrupts: The interrupt outputs from the controller.
 - #address-cells: The number of cells used to represent physical base addresses
   in the host1x address space. Should be 1.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0f295a4798ad..1db9dbef3e56 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -254,6 +254,7 @@ opencores	OpenCores.org
 openrisc	OpenRISC.io
 option	Option NV
 ORCL	Oracle Corporation
+orisetech	Orise Technology
 ortustech	Ortus Technology Co., Ltd.
 ovti	OmniVision Technologies
 oxsemi	Oxford Semiconductor, Ltd.
diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
index 679373b4a03f..a2214cc1f821 100644
--- a/Documentation/gpu/drm-uapi.rst
+++ b/Documentation/gpu/drm-uapi.rst
@@ -168,6 +168,61 @@ IOCTL Support on Device Nodes
 .. kernel-doc:: drivers/gpu/drm/drm_ioctl.c
    :doc: driver specific ioctls
 
+Recommended IOCTL Return Values
+-------------------------------
+
+In theory a driver's IOCTL callback is only allowed to return very few error
+codes. In practice it's good to abuse a few more. This section documents common
+practice within the DRM subsystem:
+
+ENOENT:
+        Strictly this should only be used when a file doesn't exist e.g. when
+        calling the open() syscall. We reuse that to signal any kind of object
+        lookup failure, e.g. for unknown GEM buffer object handles, unknown KMS
+        object handles and similar cases.
+
+ENOSPC:
+        Some drivers use this to differentiate "out of kernel memory" from "out
+        of VRAM". Sometimes also applies to other limited gpu resources used for
+        rendering (e.g. when you have a special limited compression buffer).
+        Sometimes resource allocation/reservation issues in command submission
+        IOCTLs are also signalled through EDEADLK.
+
+        Simply running out of kernel/system memory is signalled through ENOMEM.
+
+EPERM/EACCESS:
+        Returned for an operation that is valid, but needs more privileges.
+        E.g. root-only or much more common, DRM master-only operations return
+        this when when called by unpriviledged clients. There's no clear
+        difference between EACCESS and EPERM.
+
+ENODEV:
+        Feature (like PRIME, modesetting, GEM) is not supported by the driver.
+
+ENXIO:
+        Remote failure, either a hardware transaction (like i2c), but also used
+        when the exporting driver of a shared dma-buf or fence doesn't support a
+        feature needed.
+
+EINTR:
+        DRM drivers assume that userspace restarts all IOCTLs. Any DRM IOCTL can
+        return EINTR and in such a case should be restarted with the IOCTL
+        parameters left unchanged.
+
+EIO:
+        The GPU died and couldn't be resurrected through a reset. Modesetting
+        hardware failures are signalled through the "link status" connector
+        property.
+
+EINVAL:
+        Catch-all for anything that is an invalid argument combination which
+        cannot work.
+
+IOCTL also use other error codes like ETIME, EFAULT, EBUSY, ENOTTY but their
+usage is in line with the common meanings. The above list tries to just document
+DRM specific patterns. Note that ENOTTY has the slightly unintuitive meaning of
+"this IOCTL does not exist", and is used exactly as such in DRM.
+
 .. kernel-doc:: include/drm/drm_ioctl.h
    :internal:
 
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index 35d673bf9b56..c36586dad29d 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide
    pl111
    tegra
    tinydrm
+   tve200
    vc4
    vga-switcheroo
    vgaarbiter
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 22af55d06ab8..96f8ec7dbe4e 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -75,17 +75,6 @@ helpers.
 
 Contact: Ville Syrjälä, Daniel Vetter, driver maintainers
 
-Implement deferred fbdev setup in the helper
---------------------------------------------
-
-Many (especially embedded drivers) want to delay fbdev setup until there's a
-real screen plugged in. This is to avoid the dreaded fallback to the low-res
-fbdev default. Many drivers have a hacked-up (and often broken) version of this,
-better to do it once in the shared helpers. Thierry has a patch series, but that
-one needs to be rebased and final polish applied.
-
-Contact: Thierry Reding, Daniel Vetter, driver maintainers
-
 Convert early atomic drivers to async commit helpers
 ----------------------------------------------------
 
@@ -138,6 +127,8 @@ interfaces to fix these issues:
   the acquire context explicitly on stack and then also pass it down into
   drivers explicitly so that the legacy-on-atomic functions can use them.
 
+  Except for some driver code this is done.
+
 * A bunch of the vtable hooks are now in the wrong place: DRM has a split
   between core vfunc tables (named ``drm_foo_funcs``), which are used to
   implement the userspace ABI. And then there's the optional hooks for the
@@ -151,6 +142,8 @@ interfaces to fix these issues:
   connector at runtime. That's almost all of them, and would allow us to get
   rid of a lot of ``best_encoder`` boilerplate in drivers.
 
+  This was almost done, but new drivers added a few more cases again.
+
 Contact: Daniel Vetter
 
 Get rid of dev->struct_mutex from GEM drivers
@@ -177,14 +170,19 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 
 Contact: Daniel Vetter, respective driver maintainers
 
-Core refactorings
-=================
+Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent
+----------------------------------------------------------------------------
 
-Use new IDR deletion interface to clean up drm_gem_handle_delete()
-------------------------------------------------------------------
+For drivers which could have multiple instances, it is necessary to
+differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR
+don't do this, drivers used dev_info/warn/err to make this differentiation. We
+now have DRM_DEV_* variants of the drm print macros, so we can start to convert
+those drivers back to using drm-formwatted specific log messages.
 
-See the "This is gross" comment -- apparently the IDR system now can return an
-error code instead of oopsing.
+Contact: Sean Paul, Maintainer of the driver you plan to convert
+
+Core refactorings
+=================
 
 Clean up the DRM header mess
 ----------------------------
@@ -306,6 +304,18 @@ There's a bunch of issues with it:
 
 Contact: Daniel Vetter
 
+KMS cleanups
+------------
+
+Some of these date from the very introduction of KMS in 2008 ...
+
+- drm_mode_config.crtc_idr is misnamed, since it contains all KMS object. Should
+  be renamed to drm_mode_config.object_idr.
+
+- drm_display_mode doesn't need to be derived from drm_mode_object. That's
+  leftovers from older (never merged into upstream) KMS designs where modes
+  where set using their ID, including support to add/remove modes.
+
 Better Testing
 ==============
 
@@ -353,7 +363,16 @@ those drivers as simple as possible, so lots of room for refactoring:
 - backlight helpers, probably best to put them into a new drm_backlight.c.
   This is because drivers/video is de-facto unmaintained. We could also
   move drivers/video/backlight to drivers/gpu/backlight and take it all
-  over within drm-misc, but that's more work.
+  over within drm-misc, but that's more work. Backlight helpers require a fair
+  bit of reworking and refactoring. A simple example is the enabling of a backlight.
+  Tinydrm has helpers for this. It would be good if other drivers can also use the
+  helper. However, there are various cases we need to consider i.e different
+  drivers seem to have different ways of enabling/disabling a backlight.
+  We also need to consider the backlight drivers (like gpio_backlight). The situation
+  is further complicated by the fact that the backlight is tied to fbdev
+  via fb_notifier_callback() which has complicated logic. For further details, refer
+  to the following discussion thread:
+  https://groups.google.com/forum/#!topic/outreachy-kernel/8rBe30lwtdA
 
 - spi helpers, probably best put into spi core/helper code. Thierry said
   the spi maintainer is fast&reactive, so shouldn't be a big issue.
diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst
new file mode 100644
index 000000000000..69b17b324e12
--- /dev/null
+++ b/Documentation/gpu/tve200.rst
@@ -0,0 +1,6 @@
+==================================
+ drm/tve200 Faraday TV Encoder 200
+==================================
+
+.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
+   :doc: Faraday TV Encoder 200