diff options
| author | Jon Loeliger | 2006-08-17 08:42:35 -0500 |
|---|---|---|
| committer | Paul Mackerras | 2006-08-18 09:50:16 +1000 |
| commit | f583165f6a926e9f27ff8d15c0e4b22e83f0d599 (patch) | |
| tree | d4765340b1184a4a94565bbad197cb7b2488d6d1 /Documentation | |
| parent | 9a936a2e0526089194159eae31238e36b1c19e74 (diff) | |
[POWERPC] Convert to mac-address for ethernet MAC address data.
Also accept "local-mac-address". However the old "address"
is now obsolete, but accepted for backwards compatibility.
It should be removed after all device trees have been
converted to use "mac-address".
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/powerpc/booting-without-of.txt | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 3c62e66e1fcc..8c48b8a27b9c 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model. - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - compatible : Should be "gianfar" - reg : Offset and length of the register set for the device - - address : List of bytes representing the ethernet address of + - mac-address : List of bytes representing the ethernet address of this controller - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level @@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model. model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; + mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <d 3 e 3 12 3>; interrupt-parent = <40000>; phy-handle = <2452000> @@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node. model = "TSEC"; compatible = "gianfar"; reg = <24000 1000>; - address = [ 00 E0 0C 00 73 00 ]; + mac-address = [ 00 E0 0C 00 73 00 ]; interrupts = <d 3 e 3 12 3>; interrupt-parent = <40000>; phy-handle = <2452000>; @@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node. model = "TSEC"; compatible = "gianfar"; reg = <25000 1000>; - address = [ 00 E0 0C 00 73 01 ]; + mac-address = [ 00 E0 0C 00 73 01 ]; interrupts = <13 3 14 3 18 3>; interrupt-parent = <40000>; phy-handle = <2452001>; @@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node. model = "FEC"; compatible = "gianfar"; reg = <26000 1000>; - address = [ 00 E0 0C 00 73 02 ]; + mac-address = [ 00 E0 0C 00 73 02 ]; interrupts = <19 3>; interrupt-parent = <40000>; phy-handle = <2452002>; |