aboutsummaryrefslogtreecommitdiff
path: root/arch/arc
diff options
context:
space:
mode:
authorAlexey Brodkin2017-08-01 12:58:47 +0300
committerVineet Gupta2017-08-04 13:56:34 +0530
commit7d79cee2c6540ea64dd917a14e2fd63d4ac3d3c0 (patch)
tree359b387e93411565dfd21dc446340bca12e0ab2c /arch/arc
parent2e332fec2f2c996f8d5447b0946ca43bb0ae4b42 (diff)
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Cc: stable@vger.kernel.org #4.4+ Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: PAR40 regs only written if PAE40 exist]
Diffstat (limited to 'arch/arc')
-rw-r--r--arch/arc/include/asm/cache.h2
-rw-r--r--arch/arc/mm/cache.c13
2 files changed, 13 insertions, 2 deletions
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 19ebddffb279..02fd1cece6ef 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -96,7 +96,9 @@ extern unsigned long perip_base, perip_end;
#define ARC_REG_SLC_FLUSH 0x904
#define ARC_REG_SLC_INVALIDATE 0x905
#define ARC_REG_SLC_RGN_START 0x914
+#define ARC_REG_SLC_RGN_START1 0x915
#define ARC_REG_SLC_RGN_END 0x916
+#define ARC_REG_SLC_RGN_END1 0x917
/* Bit val in SLC_CONTROL */
#define SLC_CTRL_DIS 0x001
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index bebc24cb7912..874913b3e826 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -665,6 +665,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
static DEFINE_SPINLOCK(lock);
unsigned long flags;
unsigned int ctrl;
+ phys_addr_t end;
spin_lock_irqsave(&lock, flags);
@@ -694,8 +695,16 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
* END needs to be setup before START (latter triggers the operation)
* END can't be same as START, so add (l2_line_sz - 1) to sz
*/
- write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
- write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
+ end = paddr + sz + l2_line_sz - 1;
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
+
+ write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
+
+ if (is_pae40_enabled())
+ write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
+
+ write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
read_aux_reg(ARC_REG_SLC_CTRL);