Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

The i.MX device tree updates for 4.13:
 - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
   Board.
 - A series from Alexandre Belloni to correct the vendor prefix for
   rv4162 compatible.
 - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
   imx7d-sdb board.
 - Increase the SGTL5000 LRCLK pad strength to fix a random audio
   channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
   boards.
 - Clean up non-existing property 'enable-active-low' from fixed
   regulator device nodes.
 - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
   though device drivers do not use the polarity for now.
 - Add Wifi and Bluetooth support for imx7d-sdb board.
 - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
 - Update zii-rdu2 device tree source to use #include "..." for local
   inclusion.
 - A series from Philipp Zabel and Steve Longerbeam to enable video
   capture support for imx6qdl platforms.
 - A number of small random updates on various board support.

* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  ARM: dts: ls1021a: update the clockgen node
  ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
  ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
  ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
  ARM: dts: imx6-sabreauto: create i2cmux for i2c3
  ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
  ARM: dts: imx6qdl: add capture-subsystem device
  ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
  ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
  ARM: dts: imx6qdl: add multiplexer controls
  ARM: dts: imx6: Fix PCI GPIO reset polarity
  ARM: dts: imx7d-sdb: Add Bluetooth support
  ARM: dts: imx7d-sdb: Add Wifi support
  ARM: dts: imx7d-sdb: Adjust the regulator nodes
  ARM: dts: imx: Fix Ethernet PHY reset polarity
  ARM: dts: imx7: Fix typo in watchdog pin name
  ARM: dts: vf610-zii: Add switch eeprom-length properties
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 0 insertions, 5 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 968fda94d14b..66fcf838e964 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -14,7 +14,6 @@
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -379,10 +378,6 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
 };
 
 &pwm1 {