Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

The i.MX device tree updates for 4.13:
 - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
   Board.
 - A series from Alexandre Belloni to correct the vendor prefix for
   rv4162 compatible.
 - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
   imx7d-sdb board.
 - Increase the SGTL5000 LRCLK pad strength to fix a random audio
   channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
   boards.
 - Clean up non-existing property 'enable-active-low' from fixed
   regulator device nodes.
 - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
   though device drivers do not use the polarity for now.
 - Add Wifi and Bluetooth support for imx7d-sdb board.
 - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
 - Update zii-rdu2 device tree source to use #include "..." for local
   inclusion.
 - A series from Philipp Zabel and Steve Longerbeam to enable video
   capture support for imx6qdl platforms.
 - A number of small random updates on various board support.

* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  ARM: dts: ls1021a: update the clockgen node
  ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
  ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
  ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
  ARM: dts: imx6-sabreauto: create i2cmux for i2c3
  ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
  ARM: dts: imx6qdl: add capture-subsystem device
  ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
  ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
  ARM: dts: imx6qdl: add multiplexer controls
  ARM: dts: imx6: Fix PCI GPIO reset polarity
  ARM: dts: imx7d-sdb: Add Bluetooth support
  ARM: dts: imx7d-sdb: Add Wifi support
  ARM: dts: imx7d-sdb: Adjust the regulator nodes
  ARM: dts: imx: Fix Ethernet PHY reset polarity
  ARM: dts: imx7: Fix typo in watchdog pin name
  ARM: dts: vf610-zii: Add switch eeprom-length properties
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 1 insertions, 1 deletions

diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 7c5dd1b316ca..28d055e3f301 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -78,7 +78,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "okay";