diff options
| author | Arnd Bergmann | 2022-07-14 17:40:13 +0200 |
|---|---|---|
| committer | Arnd Bergmann | 2022-07-14 17:40:13 +0200 |
| commit | 3476ccbd0ae6325ef9a31e1a8c17073ef708e185 (patch) | |
| tree | b3c578f9986970039706ca9228a9e441ce852185 /arch/arm/boot | |
| parent | e0a592505566c82d60a2010d0976b8ae0a831fcc (diff) | |
| parent | daf7c850caabe0f12b10d2310a8420fc6e8abd8f (diff) | |
Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:
- Stefan drops the unnecessary "#address-cells" and "#size-cells"
properties from the DPI node of BCM283x
- Anand documents and adds support for the 63178 and 6858 SoCs
- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
that it is documented within the BCMBCA Device Tree binding documents.
He updates the 47622 DTS to remove unnecessary PSCI properties, fix
the GIC nodes and some minor cosmetic changes. He finally adds support
for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
SoCs.
- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
platforms.
- Christian adds support for the BCM53015 based Cisco Meraki MR26
Wi-Fi access point.
- Krzysztof updates the Broadcom platforms DTS to add a missing
whitespace between the property name and its value.
* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
ARM: dts: Add BCM63138 generic board dts
ARM: dts: update dts files for bcmbca SoC BCM63138
ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
dt-bindings: arm: add BCM63138 SoC
ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
ARM: dts: BCM5301X: Add DT for Meraki MR26
dt-bindings: ARM: add bindings for the Meraki MR26
dt-bindings: arm64: Add BCM6813 SoC
ARM: dts: Add DTS files for bcmbca SoC BCM63148
dt-bindings: arm: Add BCM63148 SoC
dt-bindings: arm64: Add BCM6856 SoC
dt-bindings: arm64: Add BCM63146 SoC
ARM: dts: broadcom: correct gpio-keys properties
ARM: dts: broadcom: align gpio-key node names with dtschema
ARM: dts: Add DTS files for bcmbca SoC BCM6756
dt-bindings: arm: Add BCM6756 SoC
...
Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot')
67 files changed, 1204 insertions, 137 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 68f20a2d9718..f9484f5ef126 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -135,6 +135,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-luxul-xwr-3150-v1.dtb \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ + bcm53015-meraki-mr26.dtb \ bcm53016-meraki-mr32.dtb \ bcm94708.dtb \ bcm94709.dtb \ @@ -146,8 +147,6 @@ dtb-$(CONFIG_ARCH_BCM_53573) += \ bcm47189-luxul-xap-810.dtb \ bcm47189-tenda-ac9.dtb \ bcm947189acdbmr.dtb -dtb-$(CONFIG_ARCH_BCM_63XX) += \ - bcm963138dvt.dtb dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm911360_entphn.dtb \ bcm911360k.dtb \ @@ -182,7 +181,15 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb dtb-$(CONFIG_ARCH_BCMBCA) += \ - bcm947622.dtb + bcm947622.dtb \ + bcm963138.dtb \ + bcm963138dvt.dtb \ + bcm963148.dtb \ + bcm963178.dtb \ + bcm96756.dtb \ + bcm96846.dtb \ + bcm96855.dtb \ + bcm96878.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi index ca266c5d9f9b..98817a6675b9 100644 --- a/arch/arm/boot/dts/bcm2711-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi @@ -69,6 +69,10 @@ }; }; +&v3d { + clocks = <&firmware_clocks 5>; +}; + &vchiq { interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 89af57482bc8..941c4d16791b 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -107,12 +107,13 @@ }; pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt"; #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>, <0x7ec11000 0x20>; + reg-names = "pm", "asb", "rpivid_asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, @@ -601,6 +602,17 @@ #size-cells = <0x0>; }; }; + + v3d: gpu@7ec00000 { + compatible = "brcm,2711-v3d"; + reg = <0x0 0x7ec00000 0x4000>, + <0x0 0x7ec04000 0x4000>; + reg-names = "hub", "core0"; + + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + resets = <&pm BCM2835_RESET_V3D>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index ead6e9804dbf..78465ad37c5f 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -31,22 +31,22 @@ }; i2c@3e016000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e017000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3e018000 { - status="okay"; + status = "okay"; clock-frequency = <400000>; }; i2c@3500d000 { - status="okay"; + status = "okay"; clock-frequency = <100000>; pmu: pmu@8 { diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi index c25e797b9060..a037d2bc5b11 100644 --- a/arch/arm/boot/dts/bcm2835-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-common.dtsi @@ -62,6 +62,7 @@ #reset-cells = <1>; reg = <0x7e100000 0x114>, <0x7e00a000 0x24>; + reg-names = "pm", "asb"; clocks = <&clocks BCM2835_CLOCK_V3D>, <&clocks BCM2835_CLOCK_PERI_IMAGE>, <&clocks BCM2835_CLOCK_H264>, diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index c113661a6668..d2d9c6e67f39 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -50,9 +50,9 @@ trips { cpu-crit { - temperature = <90000>; - hysteresis = <0>; - type = "critical"; + temperature = <90000>; + hysteresis = <0>; + type = "critical"; }; }; @@ -352,8 +352,6 @@ clocks = <&clocks BCM2835_CLOCK_VPU>, <&clocks BCM2835_CLOCK_DPI>; clock-names = "core", "pixel"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 8ed403767540..09ee3e46c0cc 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -70,19 +70,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 667b118ba4ee..32619c6045d3 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -54,25 +54,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi index d659e409a17e..a658b9b7bcec 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -104,33 +104,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index ff31ce45831a..f8f53457dd43 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -100,33 +100,33 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 5bac1e15775a..0ed25bf71f0d 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -29,13 +29,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts index cd797b4202ad..f1412ba83def 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts @@ -25,13 +25,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index 5b4a481be4f4..14ee410183af 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index c81944cd6d0b..600ab087f5e5 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -52,7 +52,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 43a5d675dd67..fd6d8d2a4456 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -63,19 +63,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 4c60eda296d9..76fc1099d47d 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 9ca6d1b2590d..6bcdfb73cb9e 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -94,19 +94,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 0e273c598732..ca47cc4f2ba1 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -60,13 +60,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index d00495a8b6fc..0edc2543e568 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -91,26 +91,26 @@ gpio-keys { compatible = "gpio-keys"; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; /* Switch device mode? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 8b1a05a0f1a1..1f0998f34afd 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -96,7 +96,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index 68aaf0af3945..c8c02377543b 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -45,7 +45,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 9316a36434f7..3b35a7af4b1c 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -94,7 +94,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts index 12e34a0439b4..19a7971b5a00 100644 --- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts @@ -77,13 +77,13 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 7546c8d07bcd..f52a75c4ca09 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -47,16 +47,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index beae9eab9cb8..5ff6c588e16e 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -77,42 +77,40 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power"; linux,code = <KEY_POWER>; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; }; - aoss { + button-aoss { label = "AOSS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; /* Commit mode set by switch? */ - mode { + button-mode { label = "Mode"; linux,code = <KEY_SETUP>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; }; /* Switch: AP mode */ - sw_ap { + button-sw-ap { label = "AP"; linux,code = <BTN_0>; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB eject"; linux,code = <KEY_EJECTCD>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index 7879f7d7d9c3..99253fd7adb3 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -29,16 +29,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 56d309dbc6b0..de961fbb6200 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -72,22 +72,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 89f992af61d1..087f7f60de18 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -99,28 +99,26 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts index c2a266a439d0..11d1068160da 100644 --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts @@ -77,16 +77,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index d8503758342b..a5fec56d11c0 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -72,25 +72,25 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; }; - wifi { + button-wifi { label = "Wi-Fi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; }; - led { + button-led { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 60bfd52ee677..2c38b642a8b8 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -86,20 +86,20 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; /* Switch: router / extender */ - extender { + button-extender { label = "Extender"; linux,code = <BTN_0>; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 9bef6b9bfa8d..86c7cc0fa70e 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -30,19 +30,19 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index b51a0ee7e584..9ad15bcae1ca 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index 6fa101f0a90d..ee24d3768536 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -43,7 +43,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index b959a9504eea..6549d07b9887 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index b0d8a688141d..654fcce9fded 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -34,10 +34,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index cbe8c8e4a301..bf053a2fcc7c 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -89,7 +89,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 9efcb2424228..78a90dd57a4e 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -67,7 +67,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index 42097a4c2659..f850dce37b20 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -65,25 +65,25 @@ gpio-keys { compatible = "gpio-keys"; - brightness { + button-brightness { label = "Backlight"; linux,code = <KEY_BRIGHTNESS_ZERO>; gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; }; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts index a2566ad4619c..3bf6e24978ac 100644 --- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -22,7 +22,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts index 57ca1cfaecd8..e20b6d2eb274 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts @@ -39,7 +39,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts index 2e1a7e382cb7..9d863570fcf3 100644 --- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts @@ -49,7 +49,7 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts index 07eb3a8287d6..55b92645b0f1 100644 --- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts @@ -59,19 +59,19 @@ gpio-keys { compatible = "gpio-keys"; - rfkill { + button-rfkill { label = "WiFi"; linux,code = <KEY_RFKILL>; gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index c016e12b7372..2df04528af82 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -39,6 +40,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -46,6 +48,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -76,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -88,23 +92,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x818000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts new file mode 100644 index 000000000000..14f58033efeb --- /dev/null +++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Meraki MR26 / Codename: Venom + * + * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708"; + model = "Meraki MR26"; + + memory@0 { + reg = <0x00000000 0x08000000>; + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_AMBER>; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + led-1 { + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + key-restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + clock-frequency = <50000000>; + /delete-property/ clocks; +}; + +&uart1 { + status = "disabled"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "disabled"; +}; +&gmac2 { + status = "disabled"; +}; +&gmac3 { + status = "disabled"; +}; + +&nandcs { + nand-ecc-algo = "hw"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x200000>; + read-only; + }; + + partition@200000 { + label = "u-boot-env"; + reg = <0x200000 0x200000>; + /* empty */ + }; + + partition@400000 { + label = "u-boot-backup"; + reg = <0x400000 0x200000>; + /* empty */ + }; + + partition@600000 { + label = "u-boot-env-backup"; + reg = <0x600000 0x200000>; + /* empty */ + }; + + partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; + }; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; + duplex-full; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c>; + + clock-frequency = <100000>; + + ina219@40 { + compatible = "ti,ina219"; /* PoE power */ + reg = <0x40>; + shunt-resistor = <60000>; /* = 60 mOhms */ + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <32>; + read-only; + #address-cells = <1>; + #size-cells = <1>; + + /* it's empty */ + }; +}; + +&thermal { + status = "disabled"; + /* does not work, reads 418 degree Celsius */ +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index daca63f25134..e678bc03d816 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -47,10 +47,8 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 65f8a759f1e3..5fc1b847f4aa 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -568,9 +568,9 @@ trips { cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; + temperature = <125000>; + hysteresis = <0>; + type = "critical"; }; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index cca49a2e2d62..b774a8d63813 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -9,8 +9,8 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "brcm,bcm63138"; - model = "Broadcom BCM63138 DSL SoC"; + compatible = "brcm,bcm63138", "brcm,bcmbca"; + model = "Broadcom BCM963138 Reference Board"; interrupt-parent = <&gic>; aliases { diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi new file mode 100644 index 000000000000..df5307b6b3af --- /dev/null +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63148", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + B15_0: cpu@0 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + B15_1: cpu@1 { + device_type = "cpu"; + compatible = "brcm,brahma-b15"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu: pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&B15_0>, <&B15_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@80030000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80030000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfffe8000 0x8000>; + + uart0: serial@600 { + compatible = "brcm,bcm6345-uart"; + reg = <0x600 0x20>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi new file mode 100644 index 000000000000..5463443f0762 --- /dev/null +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63178", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi new file mode 100644 index 000000000000..ce1b59faf800 --- /dev/null +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6756", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi new file mode 100644 index 000000000000..e610c102498f --- /dev/null +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6846", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@640 { + compatible = "brcm,bcm6345-uart"; + reg = <0x640 0x1b>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + clock-names = "refclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi new file mode 100644 index 000000000000..620f51aee1a2 --- /dev/null +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6855", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi new file mode 100644 index 000000000000..a7dff596fe1e --- /dev/null +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm6878", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x8000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index a76c74b44bba..363009e747b3 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -47,10 +47,10 @@ stdout-path = "serial0:115200n8"; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - hook { + button-hook { label = "HOOK"; linux,code = <KEY_O>; gpios = <&gpio_asiu 48 0>; diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts index b0b8c774a37f..16e70a264faf 100644 --- a/arch/arm/boot/dts/bcm947189acdbmr.dts +++ b/arch/arm/boot/dts/bcm947189acdbmr.dts @@ -44,13 +44,13 @@ gpio-keys { compatible = "gpio-keys"; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; }; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index dd63a148a16b..4fe3b3653376 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -47,13 +47,13 @@ gpio-keys { compatible = "gpio-keys"; - wps { + button-wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; }; - restart { + button-restart { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi index 58b7d9fc7574..c54451dde6dd 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi @@ -13,7 +13,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi index 576cfc52567b..1830844c8404 100644 --- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi @@ -14,7 +14,7 @@ autorepeat; poll-interval = <20>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts new file mode 100644 index 000000000000..d28c4f130ca2 --- /dev/null +++ b/arch/arm/boot/dts/bcm963138.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63138.dtsi" + +/ { + model = "Broadcom BCM963138 Reference Board"; + compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&serial0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index df5c8ab90627..15bec75be74c 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -8,7 +8,7 @@ #include "bcm63138.dtsi" / { - compatible = "brcm,BCM963138DVT", "brcm,bcm63138"; + compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca"; model = "Broadcom BCM963138DVT"; chosen { diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts new file mode 100644 index 000000000000..98f6a6d09f50 --- /dev/null +++ b/arch/arm/boot/dts/bcm963148.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63148.dtsi" + +/ { + model = "Broadcom BCM963148 Reference Board"; + compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts new file mode 100644 index 000000000000..fa096e9cde23 --- /dev/null +++ b/arch/arm/boot/dts/bcm963178.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63178.dtsi" + +/ { + model = "Broadcom BCM963178 Reference Board"; + compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts new file mode 100644 index 000000000000..9a4a87ba9c8a --- /dev/null +++ b/arch/arm/boot/dts/bcm96756.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6756.dtsi" + +/ { + model = "Broadcom BCM96756 Reference Board"; + compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts new file mode 100644 index 000000000000..c70ebccabc19 --- /dev/null +++ b/arch/arm/boot/dts/bcm96846.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6846.dtsi" + +/ { + model = "Broadcom BCM96846 Reference Board"; + compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts new file mode 100644 index 000000000000..4438152561ac --- /dev/null +++ b/arch/arm/boot/dts/bcm96855.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6855.dtsi" + +/ { + model = "Broadcom BCM96855 Reference Board"; + compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts new file mode 100644 index 000000000000..8fbc175cb452 --- /dev/null +++ b/arch/arm/boot/dts/bcm96878.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm6878.dtsi" + +/ { + model = "Broadcom BCM96878 Reference Board"; + compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; |