Merge tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "omap device tree changes for v3.15, part 3" from Tony Lindgren:

Device tree related changes to the omap iommu driver as that
is finally getting updated. Also few trivial board related
.dts updates to add more devices.

* tag 'omap-for-v3.15/dt-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
  ARM: dts: am335x-evmsk: enable DMA controller for USB
  ARM: dts: OMAP5: Add IOMMU nodes
  ARM: dts: OMAP4: Add IOMMU nodes
  ARM: dts: OMAP3: Add IVA IOMMU node
  ARM: dts: OMAP3: Update ISP IOMMU node
  ARM: OMAP2+: extend iommu pdata-quirks to OMAP5
  ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
  ARM: OMAP2+: use pdata quirks for iommu reset lines
  ARM: OMAP2+: change the ISP device archdata MMU name for DT
  ARM: OMAP3: fix iva mmu programming issues
  ARM: OMAP3: remove deprecated CONFIG_OMAP_IOMMU_IVA2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 82 insertions, 3 deletions

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index b50e9efc7741..fd8bd3a254fe 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -378,6 +378,10 @@
 		status = "okay";
 		dr_mode = "host";
 	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
 };
 
 &epwmss2 {
diff --git a/arch/arm/boot/dts/omap3-cm-t3530.dts b/arch/arm/boot/dts/omap3-cm-t3530.dts
index 9faf1cd1dcaa..d1458496520e 100644
--- a/arch/arm/boot/dts/omap3-cm-t3530.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3530.dts
@@ -9,4 +9,40 @@
 / {
 	model = "CompuLab CM-T3530";
 	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+	/* Regulator to trigger the reset signal of the Wifi module */
+	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_reset>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
 };
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index b91117a38100..a089e6e00457 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -416,10 +416,19 @@
 		};
 
 		mmu_isp: mmu@480bd400 {
-			compatible = "ti,omap3-mmu-isp";
-			ti,hwmods = "mmu_isp";
+			compatible = "ti,omap2-iommu";
 			reg = <0x480bd400 0x80>;
-			interrupts = <8>;
+			interrupts = <24>;
+			ti,hwmods = "mmu_isp";
+			ti,#tlb-entries = <8>;
+		};
+
+		mmu_iva: mmu@5d000000 {
+			compatible = "ti,omap2-iommu";
+			reg = <0x5d000000 0x80>;
+			interrupts = <28>;
+			ti,hwmods = "mmu_iva";
+			status = "disabled";
 		};
 
 		wdt2: wdt@48314000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 4e15be59b839..3dfec86c1dc9 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -467,6 +467,21 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
 		wdt2: wdt@4a314000 {
 			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
 			reg = <0x4a314000 0x80>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 859a800a77fc..757f0b9343c2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -520,6 +520,21 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
 		keypad: keypad@4ae1c000 {
 			compatible = "ti,omap4-keypad";
 			reg = <0x4ae1c000 0x400>;