diff options
| author | Linus Torvalds | 2022-05-26 10:28:12 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2022-05-26 10:28:12 -0700 |
| commit | ae862183285cbb2ef9032770d98ffa9becffe9d5 (patch) | |
| tree | fcceed35ddadcab9100abcf830c09949cddab3c8 /arch/arm/boot | |
| parent | c011dd537ffe47462051930413fed07dbdc80313 (diff) | |
| parent | 82706d6fb19d0b845146f7108fce3926502c5f52 (diff) | |
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
Diffstat (limited to 'arch/arm/boot')
341 files changed, 17779 insertions, 8413 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c16f8a2b738..edfbedaa6168 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp2.dtb \ bcm4708-linksys-ea6300-v1.dtb \ bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ @@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm947622.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ @@ -458,8 +462,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ + imx6dl-colibri-aster.dtb \ imx6dl-colibri-eval-v3.dtb \ - imx6dl-colibri-v1_1-eval-v3.dtb \ + imx6dl-colibri-iris.dtb \ + imx6dl-colibri-iris-v2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -547,6 +553,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b450v3.dtb \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ + imx6q-bosch-acc.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-cubox-i-emmc-som-v15.dtb \ @@ -690,6 +697,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-kontron-n6310-s.dtb \ imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ + imx6ul-tqma6ul1-mba6ulx.dtb \ + imx6ul-tqma6ul2-mba6ulx.dtb \ + imx6ul-tqma6ul2l-mba6ulx.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ @@ -701,15 +711,28 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ + imx6ull-colibri-aster.dtb \ + imx6ull-colibri-emmc-aster.dtb \ imx6ull-colibri-emmc-eval-v3.dtb \ + imx6ull-colibri-emmc-iris.dtb \ + imx6ull-colibri-emmc-iris-v2.dtb \ imx6ull-colibri-eval-v3.dtb \ + imx6ull-colibri-iris.dtb \ + imx6ull-colibri-iris-v2.dtb \ + imx6ull-colibri-wifi-aster.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-colibri-wifi-iris.dtb \ + imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ + imx6ull-phytec-tauri-emmc.dtb \ + imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tqma6ull2-mba6ulx.dtb \ + imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ @@ -732,6 +755,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-smegw01.dtb \ imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ imx7s-colibri-aster.dtb \ @@ -741,9 +765,14 @@ dtb-$(CONFIG_SOC_IMX7D) += \ dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_SOC_IMXRT) += \ + imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LAN966) += \ - lan966x-pcb8291.dtb + lan966x-pcb8291.dtb \ + lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ + lan966x-kontron-kswitch-d10-mmt-8g.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-tsn.dtb \ @@ -977,11 +1006,12 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ + qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ - qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-sony-xperia-lagan-yuga.dtb \ qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ @@ -1000,12 +1030,12 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ - qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ - qcom-msm8974-samsung-klte.dtb \ - qcom-msm8974-sony-xperia-amami.dtb \ - qcom-msm8974-sony-xperia-castor.dtb \ - qcom-msm8974-sony-xperia-honami.dtb \ + qcom-msm8974-sony-xperia-rhine-amami.dtb \ + qcom-msm8974-sony-xperia-rhine-honami.dtb \ + qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-samsung-klte.dtb \ + qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ qcom-sdx55-mtp.dtb \ qcom-sdx55-t55.dtb \ @@ -1156,10 +1186,14 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ stm32mp135f-dk.dtb \ + stm32mp151a-prtt1a.dtb \ + stm32mp151a-prtt1c.dtb \ + stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157a-dk1-scmi.dtb \ stm32mp157a-iot-box.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ @@ -1170,9 +1204,12 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ + stm32mp157c-dk2-scmi.dtb \ stm32mp157c-ed1.dtb \ + stm32mp157c-ed1-scmi.dtb \ stm32mp157c-emsbc-argon.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ @@ -1382,6 +1419,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-ux500-samsung-janice.dtb \ ste-ux500-samsung-gavini.dtb \ ste-ux500-samsung-codina.dtb \ + ste-ux500-samsung-codina-tmo.dtb \ ste-ux500-samsung-skomer.dtb \ ste-ux500-samsung-kyle.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 366702630290..d3eafee79a23 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -285,7 +285,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 56ae5095a5b8..02e04a12a270 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -405,3 +405,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-bone-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 659e99eabe66..b9745a2f0e4d 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -782,3 +782,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index a2db65538e51..9c458e5a95b7 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -719,3 +719,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index 1918766c1f80..1a7e187b1953 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -29,39 +29,44 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - gpio_keys { + guardian_buttons: gpio-keys { + pinctrl-names = "default"; + pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - button21 { + select-button { + label = "guardian-select-button"; + linux,code = <KEY_5>; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + power-button { label = "guardian-power-button"; linux,code = <KEY_POWER>; - gpios = <&gpio2 21 0>; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; wakeup-source; }; }; - leds { - compatible = "gpio-leds"; + guardian_leds: gpio-leds { pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; + pinctrl-0 = <&guardian_led_pins>; + compatible = "gpio-leds"; - led1 { - label = "green:heartbeat"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + life-led { + label = "guardian:life-led"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; + }; - led2 { - label = "green:mmc0"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; panel { @@ -100,20 +105,36 @@ }; - pwm7: dmtimer-pwm { + guardian_beeper: dmtimer-pwm@7 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer7>; pinctrl-names = "default"; - pinctrl-0 = <&dmtimer7_pins>; + pinctrl-0 = <&guardian_beeper_pins>; ti,clock-source = <0x01>; }; - vmmcsd_fixed: regulator-3v3 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + mt_keypad: mt_keypad@0 { + compatible = "gpio-mt-keypad"; + debounce-delay-ms = <10>; + col-scan-delay-us = <2>; + keypad,num-lines = <5>; + linux,no-autorepeat; + gpio-activelow; + line-gpios = < + &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/ + &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/ + &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/ + &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/ + &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/ + >; + }; }; &elm { @@ -133,28 +154,29 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; + gpmc,cs-rd-off-ns = <30>; + gpmc,cs-wr-off-ns = <30>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; + gpmc,we-off-ns = <15>; + gpmc,oe-on-ns = <1>; + gpmc,oe-off-ns = <15>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <30>; + gpmc,wr-cycle-ns = <30>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; + gpmc,wr-access-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* @@ -198,18 +220,33 @@ }; partition@6 { - label = "u-boot-env"; - reg = <0x300000 0x40000>; + label = "u-boot-2"; + reg = <0x300000 0x100000>; }; partition@7 { - label = "u-boot-env.backup1"; - reg = <0x340000 0x40000>; + label = "u-boot-2.backup1"; + reg = <0x400000 0x100000>; }; partition@8 { + label = "u-boot-env"; + reg = <0x500000 0x40000>; + }; + + partition@9 { + label = "u-boot-env.backup1"; + reg = <0x540000 0x40000>; + }; + + partition@10 { + label = "splash-screen"; + reg = <0x580000 0x40000>; + }; + + partition@11 { label = "UBI"; - reg = <0x380000 0x1fc80000>; + reg = <0x5c0000 0x1fa40000>; }; }; }; @@ -228,6 +265,11 @@ &lcdc { blue-and-red-wiring = "crossed"; status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <0>; + }; + }; }; &mmc1 { @@ -242,7 +284,6 @@ &rtc { clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; - system-power-controller; }; &spi0 { @@ -255,14 +296,34 @@ #include "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NMI */ backlight { isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <100>; + fdim = <500>; /* TPS65217_BL_FDIM_500HZ */ + default-brightness = <50>; + /* 1(on) - enable current sink, while initialization */ + /* 0(off) - disable current sink, while initialization */ + isink-en = <1>; }; regulators { @@ -272,6 +333,7 @@ }; dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1351500>; @@ -280,6 +342,7 @@ }; dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1150000>; @@ -319,171 +382,364 @@ }; }; +&gpio0 { + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MirxWakeup", + "", + ""; +}; + +&gpio3 { + ti,gpio-always-on; + ti,no-reset-on-init; + gpio-line-names = + "", + "MirxBtReset", + "", + "CcVolAdcEn", + "MirxBlePause", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AspEn", + "", + "", + "", + "", + "", + "", + "BatVolAdcEn", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + &usb0 { dr_mode = "peripheral"; }; &usb1 { dr_mode = "host"; + /delete-property/dmas; + /delete-property/dma-names; }; &am33xx_pinmux { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &gpio_pins>; + pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; - dmtimer7_pins: pinmux_dmtimer7_pins { + guardian_interface_pins: pinmux_interface_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + /* ADC_BATSENSE_EN */ + /* (A14) MCASP0_AHCLKx.gpio3[21] */ + AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ADC_COINCELL_EN */ + /* (J16) MII1_TX_EN.gpio3[3] */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ASP_ENABLE */ + /* (A13) MCASP0_ACLKx.gpio3[14] */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7) + /* (D15) uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7) + /*SWITCH-OFF_3V6*/ + /* (M18) gpio0[1] */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* MIRACULIX */ + /* (H17) gmii1_crs.gpio3[1] */ + AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (H18) rmii1_refclk.gpio0[29] */ + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 ) + /* (J17) gmii1_rxdv.gpio3[4] */ + AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) >; }; - gpio_keys_pins: pinmux_gpio_keys_pins { + guardian_beeper_pins: pinmux_dmtimer7_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ >; }; - gpio_pins: pinmux_gpio_pins { + guardian_button_pins: pinmux_guardian_button_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ >; }; + i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + led_bl_pins: gpio_led_bl_pins { + pinctrl-single,pins = < + /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) >; }; lcd_disen_pins: pinmux_lcd_disen_pins { pinctrl-single,pins = < + /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) >; }; lcd_pins_default: pinmux_lcd_pins_default { pinctrl-single,pins = < + /* (U10) gpmc_ad8.lcd_data23 */ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T10) gpmc_ad9.lcd_data22 */ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T11) gpmc_ad10.lcd_data21 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U12) gpmc_ad11.lcd_data20 */ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T12) gpmc_ad12.lcd_data19 */ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (R12) gpmc_ad13.lcd_data18 */ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (V13) gpmc_ad14.lcd_data17 */ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U13) gpmc_ad15.lcd_data16 */ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) >; }; lcd_pins_sleep: pinmux_lcd_pins_sleep { pinctrl-single,pins = < + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) >; }; - leds_pins: pinmux_leds_pins { + guardian_led_pins: pinmux_guardian_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < + /* SPI0_CLK - spi0_clk.spi */ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* SPI0_MOSI - spi0_d0.spi0 */ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* SPI0_MISO - spi0_d1.spi0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + /* SPI0_CS0 - spi */ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart0_txd.uart0_txd */ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) >; }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* K18 uart2_rxd.mirx_txd */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) + /* L18 uart2_txd.mirx_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < + /* (U7) gpmc_ad0.gpmc_ad0 */ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + /* (V7) gpmc_ad1.gpmc_ad1 */ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + /* (R8) gpmc_ad2.gpmc_ad2 */ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + /* (T8) gpmc_ad3.gpmc_ad3 */ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + /* (U8) gpmc_ad4.gpmc_ad4 */ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + /* (V8) gpmc_ad5.gpmc_ad5 */ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + /* (R9) gpmc_ad6.gpmc_ad6 */ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + /* (T9) gpmc_ad7.gpmc_ad7 */ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + /* (T17) gpmc_wait0.gpmc_wait0 */ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + /* (U17) gpmc_wpn.gpmc_wpn */ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + /* (V6) gpmc_csn0.gpmc_csn0 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + /* (R7) gpmc_advn_ale.gpmc_advn_ale */ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + /* (T7) gpmc_oen_ren.gpmc_oen_ren */ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + /* (U6) gpmc_wen.gpmc_wen */ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) >; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 11e8f64b6606..92a0e98ec231 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -182,7 +182,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index a7269b90d795..e7e439a0630a 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -394,7 +394,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi index 245c35f41cdf..6eea18b29355 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -27,6 +27,13 @@ reg = <0x80000000 0x10000000>; }; + clk32k: clk32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + + #clock-cells = <0>; + }; + vdd_mod: vdd_mod_reg { compatible = "regulator-fixed"; regulator-name = "vdd-mod"; @@ -124,9 +131,6 @@ gpmc,wr-data-mux-bus-ns = <0>; ti,elm-id = <&elm>; ti,nand-ecc-opt = "bch8"; - - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -149,6 +153,8 @@ }; &rtc { + clocks = <&clk32k>; + clock-names = "ext-clk"; system-power-controller; }; diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts index 1479fd95dec2..9d81d4cc6890 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -227,14 +227,20 @@ }; &nand0 { - partition@0 { - label = "MLO"; - reg = <0x00000 0x20000>; - }; + nand_parts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@20000 { - label = "boot"; - reg = <0x20000 0x80000>; + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@80000 { + label = "boot"; + reg = <0x80000 0x100000>; + }; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index f65cd1331315..e2cec1ffaa4c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -331,7 +331,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - serial_flash: m25p80@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 6516907ed579..73b5d1a024bd 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -588,7 +588,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - flash: n25q032@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q032"; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index b7b7106f2dee..d34483ae1778 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -5,251 +5,288 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-22@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <0>; - reg = <0x0664>; - }; + clock@664 { + compatible = "ti,clksel"; + reg = <0x664>; + #clock-cells = <2>; + #address-cells = <0>; - ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <1>; - reg = <0x0664>; - }; + ehrpwm0_tbclk: clock-ehrpwm0-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + }; - ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <2>; - reg = <0x0664>; + ehrpwm1_tbclk: clock-ehrpwm1-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + }; + + ehrpwm2_tbclk: clock-ehrpwm2-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + }; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck@490 { + dpll_core_ck: clock@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@480 { + dpll_core_m4_ck: clock-dpll-core-m4@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0480>; ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck@484 { + dpll_core_m5_ck: clock-dpll-core-m5@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0484>; ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck@4d8 { + dpll_core_m6_ck: clock-dpll-core-m6@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x04d8>; ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck@488 { + dpll_mpu_ck: clock@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x04a8>; ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck@494 { + dpll_ddr_ck: clock@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; reg = <0x04a0>; ti,index-starts-at-one; }; - dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_ddr_m2_div2_ck"; clocks = <&dpll_ddr_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck@498 { + dpll_disp_ck: clock@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { + dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; reg = <0x04a4>; @@ -257,418 +294,484 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@48c { + dpll_per_ck: clock@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>; }; - dpll_per_m2_ck: dpll_per_m2_ck@4ac { + dpll_per_m2_ck: clock-dpll-per-m2@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x04ac>; ti,index-starts-at-one; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@530 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck@914 { + mmu_fck: clock-mmu-fck-1@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "mmu_fck"; clocks = <&dpll_core_m4_ck>; ti,bit-shift = <1>; reg = <0x0914>; }; - timer1_fck: timer1_fck@528 { + timer1_fck: clock-timer1-fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck@508 { + timer2_fck: clock-timer2-fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; - timer3_fck: timer3_fck@50c { + timer3_fck: clock-timer3-fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; - timer4_fck: timer4_fck@510 { + timer4_fck: clock-timer4-fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; - timer5_fck: timer5_fck@518 { + timer5_fck: clock-timer5-fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; - timer6_fck: timer6_fck@51c { + timer6_fck: clock-timer6-fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; - timer7_fck: timer7_fck@504 { + timer7_fck: clock-timer7-fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck@47c { + usbotg_fck: clock-usbotg-fck-8@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usbotg_fck"; clocks = <&dpll_per_ck>; ti,bit-shift = <8>; reg = <0x047c>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - ieee5000_fck: ieee5000_fck@e4 { + ieee5000_fck: clock-ieee5000-fck-1@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ieee5000_fck"; clocks = <&dpll_core_m4_div2_ck>; ti,bit-shift = <1>; reg = <0x00e4>; }; - wdt1_fck: wdt1_fck@538 { + wdt1_fck: clock-wdt1-fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; - l4_rtc_gclk: l4_rtc_gclk { + l4_rtc_gclk: clock-l4-rtc-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_rtc_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4fw_gclk: l4fw_gclk { + l4fw_gclk: clock-l4fw-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4fw_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - sysclk_div_ck: sysclk_div_ck { + sysclk_div_ck: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - lcd_gclk: lcd_gclk@534 { + lcd_gclk: clock-lcd-gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "lcd_gclk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x0534>; ti,set-rate-parent; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; - ti,bit-shift = <1>; - reg = <0x052c>; - }; + clock@52c { + compatible = "ti,clksel"; + reg = <0x52c>; + #clock-cells = <2>; + #address-cells = <0>; - gfx_fck_div_ck: gfx_fck_div_ck@52c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&gfx_fclk_clksel_ck>; - reg = <0x052c>; - ti,max-div = <2>; - }; + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + }; - sysclkout_pre_ck: sysclkout_pre_ck@700 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; - reg = <0x0700>; + gfx_fck_div_ck: clock-gfx-fck-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; + clocks = <&gfx_fclk_clksel_ck>; + ti,max-div = <2>; + }; }; - clkout2_div_ck: clkout2_div_ck@700 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x0700>; - }; + clock@700 { + compatible = "ti,clksel"; + reg = <0x700>; + #clock-cells = <2>; + #address-cells = <0>; - clkout2_ck: clkout2_ck@700 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_div_ck>; - ti,bit-shift = <7>; - reg = <0x0700>; + sysclkout_pre_ck: clock-sysclkout-pre { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "sysclkout_pre_ck"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + }; + + clkout2_div_ck: clock-clkout2-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "clkout2_div_ck"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + }; + + clkout2_ck: clock-clkout2 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "clkout2_ck"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + }; }; }; &prcm { - per_cm: per-cm@0 { + per_cm: clock@0 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x400>; - l4ls_clkctrl: l4ls-clkctrl@38 { + l4ls_clkctrl: clock@38 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@1c { + l3s_clkctrl: clock@1c { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; #clock-cells = <2>; }; - l3_clkctrl: l3-clkctrl@24 { + l3_clkctrl: clock@24 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; #clock-cells = <2>; }; - l4hs_clkctrl: l4hs-clkctrl@120 { + l4hs_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l4hs_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + pruss_ocp_clkctrl: clock@e8 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0xe8 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + cpsw_125mhz_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0x0 0x18>; #clock-cells = <2>; }; - lcdc_clkctrl: lcdc-clkctrl@18 { + lcdc_clkctrl: clock@18 { compatible = "ti,clkctrl"; + clock-output-names = "lcdc_clkctrl"; reg = <0x18 0x4>; #clock-cells = <2>; }; - clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + clk_24mhz_clkctrl: clock@14c { compatible = "ti,clkctrl"; + clock-output-names = "clk_24mhz_clkctrl"; reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - wkup_cm: wkup-cm@400 { + wkup_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + l4_wkup_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x0 0x10>, <0xb4 0x24>; #clock-cells = <2>; }; - l3_aon_clkctrl: l3-aon-clkctrl@14 { + l3_aon_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l3_aon_clkctrl"; reg = <0x14 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { + l4_wkup_aon_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@600 { + mpu_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: mpu-clkctrl@0 { + mpu_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@800 { + l4_rtc_cm: clock@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@0 { + l4_rtc_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@900 { + gfx_l3_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@0 { + gfx_l3_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4-cefuse-cm@a00 { + l4_cefuse_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cefuse_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { + l4_cefuse_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cefuse_clkctrl"; reg = <0x0 0x24>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f6ec85d58dd1..9a8698bd2852 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -461,8 +461,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index 220d0a52797e..0ee7afaa0e8e 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -62,12 +62,27 @@ }; }; &cm_clocks { - ipss_ick: ipss_ick@a10 { - #clock-cells = <0>; - compatible = "ti,am35xx-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + ipss_ick: clock-ipss-ick { + #clock-cells = <0>; + compatible = "ti,am35xx-interface-clock"; + clock-output-names = "ipss_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + uart4_ick_am35xx: clock-uart4-ick-am35xx { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick_am35xx"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; }; rmii_ck: rmii_ck { @@ -82,20 +97,19 @@ clock-frequency = <27000000>; }; - uart4_ick_am35xx: uart4_ick_am35xx@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - uart4_fck_am35xx: uart4_fck_am35xx@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + uart4_fck_am35xx: clock-uart4-fck-am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck_am35xx"; + clocks = <&core_48m_fck>; + ti,bit-shift = <23>; + }; }; }; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 9423e9feaa10..c9323d1df303 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -434,7 +434,7 @@ }; &mcspi1 { - s25fl256@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 3e3354780db8..0861e868b75a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -302,7 +302,7 @@ &edma 17 0>; dma-names = "tx0", "rx0"; - flash: w25q64cvzpig@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 4416ddb559e4..46d5361fe876 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1127,6 +1127,11 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 53f64e3ce735..5a74b83145cf 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -437,7 +437,7 @@ pinctrl-1 = <&qspi_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 20a34d2d85df..036f3831dc26 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -746,7 +746,7 @@ pinctrl-0 = <&qspi_pins>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -893,6 +893,10 @@ }; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 4f9a7251a107..27f4ce855549 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -902,7 +902,7 @@ pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -1019,6 +1019,10 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 66e892fa3398..9a5437b3d6a8 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -5,217 +5,246 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-31@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; ti,bit-shift = <31>; reg = <0x0040>; }; - crystal_freq_sel_ck: crystal_freq_sel_ck@40 { + crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "crystal_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <29>; reg = <0x0040>; }; - sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sysboot_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@664 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@664 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@664 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; - ehrpwm3_tbclk: ehrpwm3_tbclk@664 { + ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm3_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; - ehrpwm4_tbclk: ehrpwm4_tbclk@664 { + ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm4_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; - ehrpwm5_tbclk: ehrpwm5_tbclk@664 { + ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm5_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32768>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <26000000>; }; - dpll_core_ck: dpll_core_ck@2d20 { + dpll_core_ck: clock@2d20 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@2d38 { + dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -224,9 +253,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m5_ck: dpll_core_m5_ck@2d3c { + dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -235,9 +265,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m6_ck: dpll_core_m6_ck@2d40 { + dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -246,16 +277,18 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck@2d60 { + dpll_mpu_ck: clock@2d60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -264,24 +297,27 @@ ti,invert-autoidle-bit; }; - mpu_periphclk: mpu_periphclk { + mpu_periphclk: clock-mpu-periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_ddr_ck: dpll_ddr_ck@2da0 { + dpll_ddr_ck: clock@2da0 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -290,16 +326,18 @@ ti,invert-autoidle-bit; }; - dpll_disp_ck: dpll_disp_ck@2e20 { + dpll_disp_ck: clock@2e20 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 { + dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -309,16 +347,18 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@2de0 { + dpll_per_ck: clock@2de0 { #clock-cells = <0>; compatible = "ti,am3-dpll-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>; }; - dpll_per_m2_ck: dpll_per_m2_ck@2df0 { + dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -327,119 +367,135 @@ ti,invert-autoidle-bit; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick@2a38 { + clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkdiv32k_ick"; clocks = <&clkdiv32k_ck>; ti,bit-shift = <8>; reg = <0x2a38>; }; - sysclk_div: sysclk_div { + sysclk_div: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@4248 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; reg = <0x4248>; }; - clk_32k_tpm_ck: clk_32k_tpm_ck { + clk_32k_tpm_ck: clock-clk-32k-tpm { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_tpm_ck"; clock-frequency = <32768>; }; - timer1_fck: timer1_fck@4200 { + timer1_fck: clock-timer1-fck@4200 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4200>; }; - timer2_fck: timer2_fck@4204 { + timer2_fck: clock-timer2-fck@4204 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4204>; }; - timer3_fck: timer3_fck@4208 { + timer3_fck: clock-timer3-fck@4208 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4208>; }; - timer4_fck: timer4_fck@420c { + timer4_fck: clock-timer4-fck@420c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x420c>; }; - timer5_fck: timer5_fck@4210 { + timer5_fck: clock-timer5-fck@4210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4210>; }; - timer6_fck: timer6_fck@4214 { + timer6_fck: clock-timer6-fck@4214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4214>; }; - timer7_fck: timer7_fck@4218 { + timer7_fck: clock-timer7-fck@4218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4218>; }; - wdt1_fck: wdt1_fck@422c { + wdt1_fck: clock-wdt1-fck@422c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; reg = <0x422c>; }; @@ -451,125 +507,141 @@ reg = <0x424c>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; reg = <0x4238>; }; - dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 { + dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_clksel_mac_clk"; clocks = <&dpll_core_m5_ck>; reg = <0x4234>; ti,bit-shift = <2>; ti,dividers = <2>, <5>; }; - clk_32k_mosc_ck: clk_32k_mosc_ck { + clk_32k_mosc_ck: clock-clk-32k-mosc { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_mosc_ck"; clock-frequency = <32768>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; reg = <0x4240>; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c { + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; clocks = <&sysclk_div>, <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x423c>; }; - gfx_fck_div_ck: gfx_fck_div_ck@423c { + gfx_fck_div_ck: clock-gfx-fck-div@423c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; clocks = <&gfx_fclk_clksel_ck>; reg = <0x423c>; ti,max-div = <2>; }; - disp_clk: disp_clk@4244 { + disp_clk: clock-disp@4244 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "disp_clk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; ti,set-rate-parent; }; - dpll_extdev_ck: dpll_extdev_ck@2e60 { + dpll_extdev_ck: clock@2e60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_extdev_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>; }; - dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 { + dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_extdev_m2_ck"; clocks = <&dpll_extdev_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -578,66 +650,75 @@ ti,invert-autoidle-bit; }; - mux_synctimer32k_ck: mux_synctimer32k_ck@4230 { + mux_synctimer32k_ck: clock-mux-synctimer32k@4230 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mux_synctimer32k_ck"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; reg = <0x4230>; }; - timer8_fck: timer8_fck@421c { + timer8_fck: clock-timer8-fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer8_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x421c>; }; - timer9_fck: timer9_fck@4220 { + timer9_fck: clock-timer9-fck@4220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer9_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4220>; }; - timer10_fck: timer10_fck@4224 { + timer10_fck: clock-timer10-fck@4224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer10_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4224>; }; - timer11_fck: timer11_fck@4228 { + timer11_fck: clock-timer11-fck@4228 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer11_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4228>; }; - cpsw_50m_clkdiv: cpsw_50m_clkdiv { + cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_50m_clkdiv"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_5m_clkdiv: cpsw_5m_clkdiv { + cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_5m_clkdiv"; clocks = <&cpsw_50m_clkdiv>; clock-mult = <1>; clock-div = <10>; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 { + dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m4_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -646,9 +727,10 @@ ti,invert-autoidle-bit; }; - dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 { + dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_per_clkdcoldo"; clocks = <&dpll_per_ck>; ti,clock-mult = <1>; ti,clock-div = <1>; @@ -657,91 +739,102 @@ ti,invert-autoidle-bit; }; - dll_aging_clk_div: dll_aging_clk_div@4250 { + dll_aging_clk_div: clock-dll-aging-clk-div@4250 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dll_aging_clk_div"; clocks = <&sys_clkin_ck>; reg = <0x4250>; ti,dividers = <8>, <16>, <32>; }; - div_core_25m_ck: div_core_25m_ck { + div_core_25m_ck: clock-div-core-25m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "div_core_25m_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <8>; }; - func_12m_clk: func_12m_clk { + func_12m_clk: clock-func-12m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <16>; }; - vtp_clk_div: vtp_clk_div { + vtp_clk_div: clock-vtp-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "vtp_clk_div"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <2>; }; - usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 { + usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "usbphy_32khz_clkmux"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; - usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 { + usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy0_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a40>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a48>; }; - clkout1_osc_div_ck: clkout1-osc-div-ck { + clkout1_osc_div_ck: clock-clkout1-osc-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_osc_div_ck"; clocks = <&sys_clkin_ck>; ti,bit-shift = <20>; ti,max-div = <4>; reg = <0x4100>; }; - clkout1_src2_mux_ck: clkout1-src2-mux-ck { + clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_src2_mux_ck"; clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, <&dpll_mpu_m2_ck>; reg = <0x4100>; }; - clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_pre_div_ck"; clocks = <&clkout1_src2_mux_ck>; ti,bit-shift = <4>; ti,max-div = <8>; reg = <0x4100>; }; - clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_post_div_ck"; clocks = <&clkout1_src2_pre_div_ck>; ti,bit-shift = <8>; ti,max-div = <32>; @@ -749,18 +842,20 @@ reg = <0x4100>; }; - clkout1_mux_ck: clkout1-mux-ck { + clkout1_mux_ck: clock-clkout1-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_mux_ck"; clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; ti,bit-shift = <16>; reg = <0x4100>; }; - clkout1_ck: clkout1-ck { + clkout1_ck: clock-clkout1-ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout1_ck"; clocks = <&clkout1_mux_ck>; ti,bit-shift = <23>; reg = <0x4100>; @@ -768,120 +863,138 @@ }; &prcm { - wkup_cm: wkup-cm@2800 { + wkup_cm: clock@2800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { + l3s_tsc_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_tsc_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + l4_wkup_aon_clkctrl: clock@228 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0x228 0xc>; #clock-cells = <2>; }; - l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + l4_wkup_clkctrl: clock@220 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x220 0x4>, <0x328 0x44>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@8300 { + mpu_cm: clock@8300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@8400 { + gfx_l3_cm: clock@8400 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@20 { + gfx_l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@8500 { + l4_rtc_cm: clock@8500 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@20 { + l4_rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - per_cm: per-cm@8800 { + per_cm: clock@8800 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l3_clkctrl: l3-clkctrl@20 { + l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x20 0x3c>, <0x78 0x2c>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@68 { + l3s_clkctrl: clock@68 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x68 0xc>, <0x220 0x4c>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { + pruss_ocp_clkctrl: clock@320 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0x320 0x4>; #clock-cells = <2>; }; - l4ls_clkctrl: l4ls-clkctrl@420 { + l4ls_clkctrl: clock@420 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x420 0x1a4>; #clock-cells = <2>; }; - emif_clkctrl: emif-clkctrl@720 { + emif_clkctrl: clock@720 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x720 0x4>; #clock-cells = <2>; }; - dss_clkctrl: dss-clkctrl@a20 { + dss_clkctrl: clock@a20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0xa20 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + cpsw_125mhz_clkctrl: clock@b20 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0xb20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 6dff3660bf09..47b9174d2353 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -18,7 +18,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2e94f32d9dfc..2fc9a5d5e0c0 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -491,7 +491,7 @@ spi-max-frequency = <48000000>; - spi_flash: spi_flash@0 { + spi_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 9fcb8944aa3e..c06eda817242 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -526,7 +526,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 77261a2fb949..a7dc4c04d10b 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -203,7 +203,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index a624b2371fb6..0abac5ffe45a 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -159,7 +159,7 @@ pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; /* MX25L8006E */ diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 64f2ce254fb6..e72b8ed4b997 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -258,7 +258,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0e679465cbb5..4c4092790a20 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -64,7 +64,7 @@ status = "disabled"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 0a961116a1f9..396172067f6a 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -242,7 +242,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts index ed3f41c7df71..241f5d7c80e9 100644 --- a/arch/arm/boot/dts/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/armada-385-atl-x530.dts @@ -168,7 +168,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi index 624bbcae68c0..10ad46f29393 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi @@ -365,7 +365,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts index 7881df3b28a0..389d9c75d546 100644 --- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts +++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts @@ -126,7 +126,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 0e4613bb56ee..332f8fce77dc 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -192,7 +192,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index d8769956cbfc..2622af73c9da 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -223,7 +223,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "macronix,mx25l6405d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index f240018148f6..f4878df39753 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -348,7 +348,11 @@ #size-cells = <0>; reg = <5>; - /* ATSHA204A at address 0x64 */ + /* ATSHA204A-MAHDA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; }; i2c@6 { @@ -485,7 +489,7 @@ pinctrl-0 = <&spi0_pins &spi0cs0_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "spansion,s25fl164k", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index a2bec07bf4c5..5130eccc32af 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -133,7 +133,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 9d873257ac45..e2ba50520b6b 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -395,7 +395,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 328a4d6afd2c..c0efafd45b33 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -97,7 +97,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 363ac4238859..2c64bc6e5a17 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -101,7 +101,7 @@ /* The microsom has an optional W25Q32 on board, connected to CS0 */ pinctrl-0 = <&spi1_pins>; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 0e29474ae9a2..792d0a0184e8 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -81,7 +81,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index fc28308e5bc5..ec6cdbeedde7 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -79,7 +79,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 606fd3476a59..3e77b4337802 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -134,7 +134,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts index a022c68dc943..c28e140b4afc 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi index 32fb21b2bf6a..47b003a81bd4 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts index 21f442afab1f..20ba5c823bb2 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi index f3e1a25ca5f2..cab99d8e2911 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts index e05aee6cdc04..2caa3980fdf6 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi index c8b1355ce15e..7028482ce4b2 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index 8a3aa616bbd0..02bef8dc4270 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -93,7 +93,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index 4ec0ae01b61d..d1b61dad0c46 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 5d04dc68cf57..75318fd0fc11 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -235,7 +235,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index b4cca507cf13..d1d348b91c0a 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -220,7 +220,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 8480a16919a0..36932e3b781a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -255,7 +255,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 809e821d7399..5551bac1962c 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index ad65be871938..f9f79ed82518 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -397,8 +397,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_0>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -409,8 +409,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_1>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -421,8 +421,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_2>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 40b9405f1a8e..9b9a18bbb20a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -32,7 +32,6 @@ * This is based on the unreleased schematic for the Model A+. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -67,21 +66,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 11edb581dbaf..f664e4fced93 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -26,7 +26,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -42,41 +41,41 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "CAM_GPIO0", /* Binary number representing build/revision */ "CONFIG0", "CONFIG1", "CONFIG2", "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 1b435c64bd9c..248feb2ed23d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -34,7 +34,6 @@ * RPI-BPLUS sheet 1 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -69,21 +68,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ + "", /* GPIO30 */ "LAN_RUN", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "ETHCLK", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "ETH_CLK", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index a23c25c00eea..f5b66d3f4ff3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -27,7 +27,6 @@ * RPI00022 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,40 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "CAM_GPIO", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "GPIO27", "GPIO28", "GPIO29", "GPIO30", "GPIO31", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 1b63d6b19750..f589bede2b11 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -27,7 +27,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,41 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ - "GPIO21", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index a75c882e6575..87958a96c3e0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 243236bc1e00..596bb1ef994e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -39,7 +39,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -74,19 +73,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ - "NC", /* GPIO42 */ + "", /* GPIO42 */ "WIFI_CLK", /* GPIO43 */ "CAM_GPIO0", /* GPIO44 */ "BT_ON", /* GPIO45 */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 6f9b3a908f28..a65c2bca69ea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -29,7 +29,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -64,22 +63,22 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ - "NC", /* GPIO40 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ - "NC", /* GPIO45 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED_N", /* Used by SD Card */ diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index d8af8eeac7b6..3635502b1e0a 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -34,7 +34,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -83,7 +82,7 @@ "CAM_GPIO0", "SMPS_SCL", "SMPS_SDA", - "ETHCLK", + "ETH_CLK", "PWM1_OUT", "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index d73daf5bff1d..f7222a28903e 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -55,7 +55,6 @@ * This is mostly based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index e12938baaf12..ec721d323ac5 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -45,7 +45,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED_R", + "PWR_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -61,7 +61,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -110,7 +109,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 42b5383b55d8..fb6a417d73e7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -54,7 +54,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -103,7 +102,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index 588d9411ceb6..cf84e69fced8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -63,8 +62,8 @@ "GPIO43", "GPIO44", "GPIO45", - "GPIO46", - "GPIO47", + "SMPS_SCL", + "SMPS_SDA", /* Used by eMMC */ "SD_CLK_R", "SD_CMD_R", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 828a20561b96..f57b4ca145dd 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -41,12 +41,12 @@ #gpio-cells = <2>; gpio-line-names = "HDMI_HPD_N", "EMMC_EN_N", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC"; + "", + "", + "", + "", + "", + ""; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi index 967e081cb9c2..882b13807075 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi index dc7ae776db5f..4273b90b53cc 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -11,7 +11,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi new file mode 100644 index 000000000000..d659e409a17e --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts new file mode 100644 index 000000000000..8e506269fa1a --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts new file mode 100644 index 000000000000..596129027074 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP2 + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index 82f9629f0abb..d8503758342b 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright (C) 2021 Arınç ÃœNAL <arinc.unal@arinc9.com> + * Copyright (C) 2021-2022 Arınç ÃœNAL <arinc.unal@arinc9.com> */ /dts-v1/; @@ -25,6 +25,9 @@ nvram@1c080000 { compatible = "brcm,nvram"; reg = <0x1c080000 0x00180000>; + + et1macaddr: et1macaddr { + }; }; leds { @@ -177,9 +180,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; @@ -208,6 +208,7 @@ sw0_p5: port@5 { reg = <5>; label = "extsw"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -231,7 +232,6 @@ reg = <8>; ethernet = <&gmac2>; label = "cpu"; - status = "disabled"; fixed-link { speed = <1000>; @@ -241,6 +241,15 @@ }; }; +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi new file mode 100644 index 000000000000..c016e12b7372 --- /dev/null +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm47622", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x818000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 66c64a6ec414..daca63f25134 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -13,7 +13,7 @@ #include <dt-bindings/leds/common.h> / { - compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; model = "Meraki MR32"; chosen { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 603c700c706f..65f8a759f1e3 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -455,7 +455,7 @@ reg = <0x180 0x4>; }; - pinctrl: pin-controller@1c0 { + pinctrl: pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts index 2e7fda9b998c..975f854f652f 100644 --- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -34,7 +34,7 @@ status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80"; reg = <0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts new file mode 100644 index 000000000000..6f083724ab8e --- /dev/null +++ b/arch/arm/boot/dts/bcm947622.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 52feca0fb906..dd63a148a16b 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Enterprise Router (BCM953012ER)"; - compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; memory@0 { device_type = "memory"; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 9140be7ec053..b070b69466bd 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar HR (BCM953012HR)"; - compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; aliases { ethernet0 = &gmac0; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index de40bd59a5fa..f1e6bcaa1edd 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar SVK (BCM953012K)"; - compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 60376b62cd5f..15f023656df0 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 8eeb319f5b54..9b9c225a1fb3 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index dc86d5a91292..ca9311452739 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -152,7 +152,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index c457e53d886e..9db3c851451a 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c06871915a1c..32786e7c4e12 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -144,7 +144,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index b22fc6624ae4..74263d98de73 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -151,7 +151,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 0183f8965a74..69ebc7a913a7 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -155,7 +155,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 007e34715956..e96bc3f2d5cf 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 7702e048e110..a92630113f57 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -167,8 +167,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index a9e7274806f4..eb0a95da94b2 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -655,8 +655,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 3e1584e787ae..2639b9fe0ab4 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -127,7 +127,7 @@ status = "okay"; /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index 273f12ca2512..a0e8996c2ffd 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -62,7 +62,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l3205d"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts index 826026c28f90..1e81d1b97055 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -79,7 +79,7 @@ status = "okay"; /* spi0.0: 2M Flash Macronix MX25L1605D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l1605d"; spi-max-frequency = <86000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts index 1754a62e014e..c1912dc6bfc3 100644 --- a/arch/arm/boot/dts/dove-dove-db.dts +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -27,7 +27,7 @@ status = "okay"; /* spi0.0: 4M Flash ST-M25P32-VMF6P */ - spi-flash@0 { + flash@0 { compatible = "st,m25p32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 0f71a9f37a72..68c43eb12c1a 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -135,7 +135,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index f12825268188..8948e10dbeb8 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -474,7 +474,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index e2b7fcb061cf..57868ac60d29 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -511,7 +511,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 2365554eef3c..04a7a6d1d529 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -5,210 +5,244 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_core_aon_clocks { - atl_clkin0_ck: atl_clkin0_ck { + atl_clkin0_ck: clock-atl-clkin0 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin0_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin1_ck: atl_clkin1_ck { + atl_clkin1_ck: clock-atl-clkin1 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin1_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin2_ck: atl_clkin2_ck { + atl_clkin2_ck: clock-atl-clkin2 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin2_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin3_ck: atl_clkin3_ck { + atl_clkin3_ck: clock-atl-clkin3 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin3_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - hdmi_clkin_ck: hdmi_clkin_ck { + hdmi_clkin_ck: clock-hdmi-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "hdmi_clkin_ck"; clock-frequency = <0>; }; - mlb_clkin_ck: mlb_clkin_ck { + mlb_clkin_ck: clock-mlb-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlb_clkin_ck"; clock-frequency = <0>; }; - mlbp_clkin_ck: mlbp_clkin_ck { + mlbp_clkin_ck: clock-mlbp-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlbp_clkin_ck"; clock-frequency = <0>; }; - pciesref_acs_clk_ck: pciesref_acs_clk_ck { + pciesref_acs_clk_ck: clock-pciesref-acs { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pciesref_acs_clk_ck"; clock-frequency = <100000000>; }; - ref_clkin0_ck: ref_clkin0_ck { + ref_clkin0_ck: clock-ref-clkin0 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin0_ck"; clock-frequency = <0>; }; - ref_clkin1_ck: ref_clkin1_ck { + ref_clkin1_ck: clock-ref-clkin1 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin1_ck"; clock-frequency = <0>; }; - ref_clkin2_ck: ref_clkin2_ck { + ref_clkin2_ck: clock-ref-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin2_ck"; clock-frequency = <0>; }; - ref_clkin3_ck: ref_clkin3_ck { + ref_clkin3_ck: clock-ref-clkin3 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin3_ck"; clock-frequency = <0>; }; - rmii_clk_ck: rmii_clk_ck { + rmii_clk_ck: clock-rmii { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "rmii_clk_ck"; clock-frequency = <0>; }; - sdvenc_clkin_ck: sdvenc_clkin_ck { + sdvenc_clkin_ck: clock-sdvenc-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sdvenc_clkin_ck"; clock-frequency = <0>; }; - secure_32k_clk_src_ck: secure_32k_clk_src_ck { + secure_32k_clk_src_ck: clock-secure-32k-clk-src { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; - sys_clk32_crystal_ck: sys_clk32_crystal_ck { + sys_clk32_crystal_ck: clock-sys-clk32-crystal { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clk32_crystal_ck"; clock-frequency = <32768>; }; - sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + sys_clk32_pseudo_ck: clock-sys-clk32-pseudo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sys_clk32_pseudo_ck"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <610>; }; - virt_12000000_ck: virt_12000000_ck { + virt_12000000_ck: clock-virt-12000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; - virt_13000000_ck: virt_13000000_ck { + virt_13000000_ck: clock-virt-13000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; - virt_16800000_ck: virt_16800000_ck { + virt_16800000_ck: clock-virt-16800000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_20000000_ck: virt_20000000_ck { + virt_20000000_ck: clock-virt-20000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_20000000_ck"; clock-frequency = <20000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - virt_27000000_ck: virt_27000000_ck { + virt_27000000_ck: clock-virt-27000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; - virt_38400000_ck: virt_38400000_ck { + virt_38400000_ck: clock-virt-38400000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; - sys_clkin2: sys_clkin2 { + sys_clkin2: clock-sys-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clkin2"; clock-frequency = <22579200>; }; - usb_otg_clkin_ck: usb_otg_clkin_ck { + usb_otg_clkin_ck: clock-usb-otg-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "usb_otg_clkin_ck"; clock-frequency = <0>; }; - video1_clkin_ck: video1_clkin_ck { + video1_clkin_ck: clock-video1-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_clkin_ck"; clock-frequency = <0>; }; - video1_m2_clkin_ck: video1_m2_clkin_ck { + video1_m2_clkin_ck: clock-video1-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_m2_clkin_ck"; clock-frequency = <0>; }; - video2_clkin_ck: video2_clkin_ck { + video2_clkin_ck: clock-video2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_clkin_ck"; clock-frequency = <0>; }; - video2_m2_clkin_ck: video2_m2_clkin_ck { + video2_m2_clkin_ck: clock-video2-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_m2_clkin_ck"; clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck@1e0 { + dpll_abe_ck: clock@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; - dpll_abe_x2_ck: dpll_abe_x2_ck { + dpll_abe_x2_ck: clock-dpll-abe-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -217,18 +251,20 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk@108 { + abe_clk: clock-abe@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { + dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -237,9 +273,10 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,30 +285,34 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux@12c { + dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck@120 { + dpll_core_ck: clock@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { + dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -280,24 +321,27 @@ ti,invert-autoidle-bit; }; - mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck@160 { + dpll_mpu_ck: clock@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -306,42 +350,47 @@ ti,invert-autoidle-bit; }; - mpu_dclk_div: mpu_dclk_div { + mpu_dclk_div: clock-mpu-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dclk_div"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { + dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dsp_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { + dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_dsp_byp_mux"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck@234 { + dpll_dsp_ck: clock@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_dsp_ck"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; assigned-clocks = <&dpll_dsp_ck>; assigned-clock-rates = <600000000>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { + dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m2_ck"; clocks = <&dpll_dsp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -352,34 +401,38 @@ assigned-clock-rates = <600000000>; }; - iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { + dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck@1a0 { + dpll_iva_ck: clock@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; assigned-clock-rates = <1165000000>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { + dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m2_ck"; clocks = <&dpll_iva_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -390,34 +443,38 @@ assigned-clock-rates = <388333334>; }; - iva_dclk: iva_dclk { + iva_dclk: clock-iva-dclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dclk"; clocks = <&dpll_iva_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { + dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gpu_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck@2d8 { + dpll_gpu_ck: clock@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gpu_ck"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; assigned-clocks = <&dpll_gpu_ck>; assigned-clock-rates = <1277000000>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { + dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gpu_m2_ck"; clocks = <&dpll_gpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -428,9 +485,10 @@ assigned-clock-rates = <425666667>; }; - dpll_core_m2_ck: dpll_core_m2_ck@130 { + dpll_core_m2_ck: clock-dpll-core-m2-8@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -439,32 +497,36 @@ ti,invert-autoidle-bit; }; - core_dpll_out_dclk_div: core_dpll_out_dclk_div { + core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "core_dpll_out_dclk_div"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { + dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_ddr_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck@210 { + dpll_ddr_ck: clock@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -473,24 +535,27 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { + dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gmac_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck@2a8 { + dpll_gmac_ck: clock@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gmac_ck"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { + dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m2_ck"; clocks = <&dpll_gmac_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -499,72 +564,81 @@ ti,invert-autoidle-bit; }; - video2_dclk_div: video2_dclk_div { + video2_dclk_div: clock-video2-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_dclk_div"; clocks = <&video2_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_dclk_div: video1_dclk_div { + video1_dclk_div: clock-video1-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_dclk_div"; clocks = <&video1_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_dclk_div: hdmi_dclk_div { + hdmi_dclk_div: clock-hdmi-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_dclk_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - per_dpll_hs_clk_div: per_dpll_hs_clk_div { + per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; }; - usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; }; - eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { + eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux@290 { + dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_eve_byp_mux"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck@284 { + dpll_eve_ck: clock@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_eve_ck"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck@294 { + dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_eve_m2_ck"; clocks = <&dpll_eve_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -573,17 +647,19 @@ ti,invert-autoidle-bit; }; - eve_dclk_div: eve_dclk_div { + eve_dclk_div: clock-eve-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dclk_div"; clocks = <&dpll_eve_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { + dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -592,9 +668,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { + dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -603,9 +680,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { + dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -614,9 +692,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { + dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -625,9 +704,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { + dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -636,15 +716,17 @@ ti,invert-autoidle-bit; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { + dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_h11x2_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -653,15 +735,17 @@ ti,invert-autoidle-bit; }; - dpll_dsp_x2_ck: dpll_dsp_x2_ck { + dpll_dsp_x2_ck: clock-dpll-dsp-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_dsp_x2_ck"; clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { + dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m3x2_ck"; clocks = <&dpll_dsp_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -672,15 +756,17 @@ assigned-clock-rates = <400000000>; }; - dpll_gmac_x2_ck: dpll_gmac_x2_ck { + dpll_gmac_x2_ck: clock-dpll-gmac-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_gmac_x2_ck"; clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { + dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h11x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -689,9 +775,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { + dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h12x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -700,9 +787,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { + dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h13x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -711,9 +799,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { + dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m3x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -722,33 +811,37 @@ ti,invert-autoidle-bit; }; - gmii_m_clk_div: gmii_m_clk_div { + gmii_m_clk_div: clock-gmii-m-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmii_m_clk_div"; clocks = <&dpll_gmac_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - hdmi_clk2_div: hdmi_clk2_div { + hdmi_clk2_div: clock-hdmi-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_clk2_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_div_clk: hdmi_div_clk { + hdmi_div_clk: clock-hdmi-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_div_clk"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - l3_iclk_div: l3_iclk_div@100 { + l3_iclk_div: clock-l3-iclk-div-4@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x0100>; @@ -756,374 +849,420 @@ ti,index-power-of-two; }; - l4_root_clk_div: l4_root_clk_div { + l4_root_clk_div: clock-l4-root-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_root_clk_div"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <2>; }; - video1_clk2_div: video1_clk2_div { + video1_clk2_div: clock-video1-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_clk2_div"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_div_clk: video1_div_clk { + video1_div_clk: clock-video1-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_div_clk"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_clk2_div: video2_clk2_div { + video2_clk2_div: clock-video2-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_clk2_div"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_div_clk: video2_div_clk { + video2_div_clk: clock-video2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_div_clk"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dummy_ck: dummy_ck { + dummy_ck: clock-dummy { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; &prm_clocks { - sys_clkin1: sys_clkin1@110 { + sys_clkin1: clock-sys-clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin1"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { + abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_sys_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { + abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux@10c { + abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk@11c { + abe_24m_fclk: clock-abe-24m@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x011c>; ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk@178 { + aess_fclk: clock-aess@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; reg = <0x0178>; ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div@174 { + abe_giclk_div: clock-abe-giclk-div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_giclk_div"; clocks = <&aess_fclk>; reg = <0x0174>; ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div@1d8 { + abe_lp_clk_div: clock-abe-lp-clk-div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x01d8>; ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div@120 { + abe_sys_clk_div: clock-abe-sys-clk-div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0120>; ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux@1dc { + adc_gfclk_mux: clock-adc-gfclk-mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "adc_gfclk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { + sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk1_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c8>; ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { + sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk2_dclk_div"; clocks = <&sys_clkin2>; ti,max-div = <64>; reg = <0x01cc>; ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { + per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_dclk_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x01bc>; ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div@18c { + dsp_gclk_div: clock-dsp-gclk-div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dsp_gclk_div"; clocks = <&dpll_dsp_m2_ck>; ti,max-div = <64>; reg = <0x018c>; ti,index-power-of-two; }; - gpu_dclk: gpu_dclk@1a0 { + gpu_dclk: clock-gpu-dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gpu_dclk"; clocks = <&dpll_gpu_m2_ck>; ti,max-div = <64>; reg = <0x01a0>; ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div@190 { + emif_phy_dclk_div: clock-emif-phy-dclk-div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emif_phy_dclk_div"; clocks = <&dpll_ddr_m2_ck>; ti,max-div = <64>; reg = <0x0190>; ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div@19c { + gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gmac_250m_dclk_div"; clocks = <&dpll_gmac_m2_ck>; ti,max-div = <64>; reg = <0x019c>; ti,index-power-of-two; }; - gmac_main_clk: gmac_main_clk { + gmac_main_clk: clock-gmac-main { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmac_main_clk"; clocks = <&gmac_250m_dclk_div>; clock-mult = <1>; clock-div = <2>; }; - l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { + l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_480m_dclk_div"; clocks = <&dpll_usb_m2_ck>; ti,max-div = <64>; reg = <0x01ac>; ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div@184 { + usb_otg_dclk_div: clock-usb-otg-dclk-div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usb_otg_dclk_div"; clocks = <&usb_otg_clkin_ck>; ti,max-div = <64>; reg = <0x0184>; ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div@1c0 { + sata_dclk_div: clock-sata-dclk-div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sata_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c0>; ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div@1b8 { + pcie2_dclk_div: clock-pcie2-dclk-div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie2_dclk_div"; clocks = <&dpll_pcie_ref_m2_ck>; ti,max-div = <64>; reg = <0x01b8>; ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div@1b4 { + pcie_dclk_div: clock-pcie-dclk-div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie_dclk_div"; clocks = <&apll_pcie_m2_ck>; ti,max-div = <64>; reg = <0x01b4>; ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div@194 { + emu_dclk_div: clock-emu-dclk-div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emu_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x0194>; ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div@1c4 { + secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "secure_32k_dclk_div"; clocks = <&secure_32k_clk_src_ck>; ti,max-div = <64>; reg = <0x01c4>; ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { + clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux0_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { + clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux1_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { + clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux2_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0160>; }; - custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <2>; }; - eve_clk: eve_clk@180 { + eve_clk: clock-eve@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "eve_clk"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { + hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "hdmi_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk@134 { + mlb_clk: clock-mlb@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlb_clk"; clocks = <&mlb_clkin_ck>; ti,max-div = <64>; reg = <0x0134>; ti,index-power-of-two; }; - mlbp_clk: mlbp_clk@130 { + mlbp_clk: clock-mlbp@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlbp_clk"; clocks = <&mlbp_clkin_ck>; ti,max-div = <64>; reg = <0x0130>; ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { + per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_gfclk2_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x0138>; ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div@144 { + timer_sys_clk_div: clock-timer-sys-clk-div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "timer_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0144>; ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux@168 { + video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video1_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux@16c { + video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video2_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux@108 { + wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { + dpll_pcie_ref_ck: clock@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_pcie_ref_ck"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { + dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2ldo_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1132,23 +1271,26 @@ ti,invert-autoidle-bit; }; - apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { + apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 { compatible = "ti,mux-clock"; + clock-output-names = "apll_pcie_in_clk_mux"; clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck@21c { + apll_pcie_ck: clock@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; + clock-output-names = "apll_pcie_ck"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; reg = <0x021c>, <0x0220>; }; - optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { + optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c { compatible = "ti,divider-clock"; + clock-output-names = "optfclk_pciephy_div"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; @@ -1157,48 +1299,54 @@ ti,max-div = <2>; }; - apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { + apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { + apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo_div"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_m2_ck: apll_pcie_m2_ck { + apll_pcie_m2_ck: clock-apll-pcie-m2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_m2_ck"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux@14c { + dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck@140 { + dpll_per_ck: clock@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck@150 { + dpll_per_m2_ck: clock-dpll-per-m2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1207,32 +1355,36 @@ ti,invert-autoidle-bit; }; - func_96m_aon_dclk_div: func_96m_aon_dclk_div { + func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_aon_dclk_div"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux@18c { + dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck@180 { + dpll_usb_ck: clock@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1241,9 +1393,10 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { + dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1252,15 +1405,17 @@ ti,invert-autoidle-bit; }; - dpll_per_x2_ck: dpll_per_x2_ck { + dpll_per_x2_ck: clock-dpll-per-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { + dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1269,9 +1424,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { + dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1280,9 +1436,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { + dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h13x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1291,9 +1448,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { + dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1302,9 +1460,10 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1313,105 +1472,118 @@ ti,invert-autoidle-bit; }; - dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; }; - func_128m_clk: func_128m_clk { + func_128m_clk: clock-func-128m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - func_12m_fclk: func_12m_fclk { + func_12m_fclk: clock-func-12m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; }; - func_24m_clk: func_24m_clk { + func_24m_clk: clock-func-24m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_48m_fclk: func_48m_fclk { + func_48m_fclk: clock-func-48m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_96m_fclk: func_96m_fclk { + func_96m_fclk: clock-func-96m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk@104 { + l3init_60m_fclk: clock-l3init-60m@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk@6b0 { + clkout2_clk: clock-clkout2-8@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout2_clk"; clocks = <&clkoutmux2_clk_mux>; ti,bit-shift = <8>; reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk@6c0 { + l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "l3init_960m_gfclk"; clocks = <&dpll_usb_clkdcoldo>; ti,bit-shift = <8>; reg = <0x06c0>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { + usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy2_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { + usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy3_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0698>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { + gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; @@ -1419,9 +1591,10 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { + gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; @@ -1429,34 +1602,38 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { + l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; ti,bit-shift = <24>; reg = <0x0e50>; ti,dividers = <8>, <16>, <32>; }; - vip1_gclk_mux: vip1_gclk_mux@1020 { + vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip1_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux@1028 { + vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip2_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux@1030 { + vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip3_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1030>; @@ -1464,48 +1641,54 @@ }; &cm_core_clockdomains { - coreaon_clkdm: coreaon_clkdm { + coreaon_clkdm: clock-coreaon-clkdm { compatible = "ti,clockdomain"; + clock-output-names = "coreaon_clkdm"; clocks = <&dpll_usb_ck>; }; }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk@558 { + dss_deshdcp_clk: clock-dss-deshdcp-0@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "dss_deshdcp_clk"; clocks = <&l3_iclk_div>; ti,bit-shift = <0>; reg = <0x558>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@558 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <20>; reg = <0x0558>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@558 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <21>; reg = <0x0558>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@558 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <22>; reg = <0x0558>; }; - sys_32k_ck: sys_32k_ck { + sys_32k_ck: clock-sys-32k { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_32k_ck"; clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; ti,bit-shift = <8>; reg = <0x6c4>; @@ -1513,97 +1696,110 @@ }; &cm_core_aon { - mpu_cm: mpu-cm@300 { + mpu_cm: clock@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dsp1_cm: dsp1-cm@400 { + dsp1_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp1_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - dsp1_clkctrl: dsp1-clkctrl@20 { + dsp1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - ipu_cm: ipu-cm@500 { + ipu_cm: clock@500 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu1_clkctrl: ipu1-clkctrl@20 { + ipu1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; assigned-clock-parents = <&dpll_core_h22x2_ck>; }; - ipu_clkctrl: ipu-clkctrl@50 { + ipu_clkctrl: clock@50 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x50 0x34>; #clock-cells = <2>; }; }; - dsp2_cm: dsp2-cm@600 { + dsp2_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp2_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - dsp2_clkctrl: dsp2-clkctrl@20 { + dsp2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - rtc_cm: rtc-cm@700 { + rtc_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "rtc_cm"; reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x60>; - rtc_clkctrl: rtc-clkctrl@20 { + rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "rtc_clkctrl"; reg = <0x20 0x28>; #clock-cells = <2>; }; }; - vpe_cm: vpe-cm@760 { + vpe_cm: clock@760 { compatible = "ti,omap4-cm"; + clock-output-names = "vpe_cm"; reg = <0x760 0xc>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x760 0xc>; - vpe_clkctrl: vpe-clkctrl@0 { + vpe_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "vpe_clkctrl"; reg = <0x0 0xc>; #clock-cells = <2>; }; @@ -1612,212 +1808,242 @@ }; &cm_core { - coreaon_cm: coreaon-cm@600 { + coreaon_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "coreaon_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: coreaon-clkctrl@20 { + coreaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "coreaon_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1-cm@700 { + l3main1_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: l3main1-clkctrl@20 { + l3main1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; }; - ipu2_cm: ipu2-cm@900 { + ipu2_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu2_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - ipu2_clkctrl: ipu2-clkctrl@20 { + ipu2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dma_cm: dma-cm@a00 { + dma_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: dma-clkctrl@20 { + dma_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif-cm@b00 { + emif_cm: clock@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: emif-clkctrl@20 { + emif_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl-cm@c00 { + atl_cm: clock@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "atl_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: atl-clkctrl@0 { + atl_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "atl_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg-cm@d00 { + l4cfg_cm: clock@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: l4cfg-clkctrl@20 { + l4cfg_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr-cm@e00 { + l3instr_cm: clock@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: l3instr-clkctrl@20 { + l3instr_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - iva_cm: iva-cm@f00 { + iva_cm: clock@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "iva_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf00 0x100>; - iva_clkctrl: iva-clkctrl@20 { + iva_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "iva_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - cam_cm: cam-cm@1000 { + cam_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "cam_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x100>; - cam_clkctrl: cam-clkctrl@20 { + cam_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "cam_clkctrl"; reg = <0x20 0x2c>; #clock-cells = <2>; }; }; - dss_cm: dss-cm@1100 { + dss_cm: clock@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: dss-clkctrl@20 { + dss_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - gpu_cm: gpu-cm@1200 { + gpu_cm: clock@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1200 0x100>; - gpu_clkctrl: gpu-clkctrl@20 { + gpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l3init_cm: l3init-cm@1300 { + l3init_cm: clock@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: l3init-clkctrl@20 { + l3init_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0x6c>, <0xe0 0x14>; #clock-cells = <2>; }; - pcie_clkctrl: pcie-clkctrl@b0 { + pcie_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "pcie_clkctrl"; reg = <0xb0 0xc>; #clock-cells = <2>; }; - gmac_clkctrl: gmac-clkctrl@d0 { + gmac_clkctrl: clock@d0 { compatible = "ti,clkctrl"; + clock-output-names = "gmac_clkctrl"; reg = <0xd0 0x4>; #clock-cells = <2>; }; }; - l4per_cm: l4per-cm@1700 { + l4per_cm: clock@1700 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: l4per-clkctrl@28 { + l4per_clkctrl: clock@28 { compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; @@ -1825,20 +2051,23 @@ assigned-clock-parents = <&abe_24m_fclk>; }; - l4sec_clkctrl: l4sec-clkctrl@1a0 { + l4sec_clkctrl: clock@1a0 { compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x2c>; #clock-cells = <2>; }; - l4per2_clkctrl: l4per2-clkctrl@c { + l4per2_clkctrl: clock@c { compatible = "ti,clkctrl"; + clock-output-names = "l4per2_clkctrl"; reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; #clock-cells = <2>; }; - l4per3_clkctrl: l4per3-clkctrl@14 { + l4per3_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l4per3_clkctrl"; reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; #clock-cells = <2>; }; @@ -1847,15 +2076,17 @@ }; &prm { - wkupaon_cm: wkupaon-cm@1800 { + wkupaon_cm: clock@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: wkupaon-clkctrl@20 { + wkupaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index ae644315855d..78dad233ff34 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -269,7 +269,8 @@ }; timer@10050000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos3250-mct", + "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, @@ -428,8 +429,6 @@ clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -439,8 +438,6 @@ clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e81b3ee4e0f7..6f0ca3354e39 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -373,7 +373,7 @@ status = "disabled"; }; - ehci: ehci@12580000 { + ehci: usb@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -384,7 +384,7 @@ phy-names = "host", "hsic0", "hsic1"; }; - ohci: ohci@12590000 { + ohci: usb@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -676,8 +676,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -687,8 +685,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma1: dma-controller@12850000 { @@ -698,8 +694,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 138d606d58a5..62bf335d5bed 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -666,8 +666,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; power-domains = <&pd_lcd0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index efaf7533e84f..36c369c42b77 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -119,8 +119,8 @@ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index a9fada51eb50..1f17cc30ed14 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -70,19 +70,19 @@ phy-names = "hsic0"; hub@2 { - compatible = "usb0424,3503"; + compatible = "usb424,3503"; reg = <2>; #address-cells = <1>; #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 21fbbf3d8684..71293749ac48 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -129,7 +129,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -289,7 +289,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5baaa7eb71a4..4708dcd575a7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -245,7 +245,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5250-mct", + "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; @@ -699,8 +700,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -710,8 +709,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -721,8 +718,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -732,8 +727,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; gsc_0: gsc@13e00000 { @@ -817,15 +810,14 @@ status = "disabled"; }; - dp_phy: video-phy { + dp_phy: video-phy-0 { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040710 { + mipi_phy: video-phy-1 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040710 0x100>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 56271e7c4587..ff1ee409eff3 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -333,7 +333,8 @@ }; mct: timer@100b0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5260-mct", + "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index e54a3391854d..d1cbc6b8a570 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -655,8 +655,8 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 4d797a9abba4..8a6b890fb8f7 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -196,8 +196,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -207,8 +205,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 21b608705049..9f2523a873d9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -437,8 +437,6 @@ clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; power-domains = <&mau_pd>; }; @@ -449,8 +447,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -460,8 +456,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -471,8 +465,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -482,8 +474,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; /* * MDMA1 can support both secure and non-secure * AXI transactions. When this is enabled in diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 2f65dcf6ba73..35818c4cd852 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -333,8 +333,6 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; @@ -358,10 +356,9 @@ tCKESR-min-tck = <2>; tMRD-min-tck = <5>; - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 { + timings_samsung_K3QF2F20DB_800mhz: timings { compatible = "jedec,lpddr3-timings"; - /* workaround: 'reg' shows max-freq */ - reg = <800000000>; + max-freq = <800000000>; min-freq = <100000000>; tRFC = <65000>; tRRD = <6000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 62c5928aa994..e3154a1cae23 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -113,13 +113,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index cecaeb69e623..a378d4937ff7 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -80,13 +80,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 2ddb7a5f12b3..3ec43761d8b9 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -74,7 +74,8 @@ }; mct: timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5420-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; interrupts-extended = <&combiner 23 3>, <&combiner 23 4>, diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index fd525c3b16fa..b660c7d05584 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -96,7 +96,7 @@ <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; wdog: watchdog@10002000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 7e2b0f198dfa..1053b7c584d8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -129,7 +129,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index f3bddc5ada4b..13acdc7916b9 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 43be7a6a769b..90928db0df70 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -51,7 +51,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256", "mr25h256"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts index aab8d6f137c3..10cae7c3a879 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -13,6 +13,13 @@ chosen { stdout-path = &uart1; }; + + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; }; &esdhc1 { @@ -63,6 +70,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; disable-over-current; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 7d4970417dce..f0809a16a2ce 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -34,22 +34,22 @@ regulators { sw1_reg: sw1 { - regulator-min-microvolt = <1000000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1275000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; @@ -102,18 +102,6 @@ regulator-always-on; }; - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -124,8 +112,6 @@ regulator-always-on; }; - gpo1_reg: gpo1 { }; - gpo2_reg: gpo2 { }; gpo3_reg: gpo3 { }; @@ -198,6 +184,7 @@ &usbotg { phy_type = "utmi_wide"; disable-over-current; + vbus-supply = <&swbst_reg>; /* Device role is not known, keep status disabled */ }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 56c8d87864c3..1e20a6639e42 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -215,6 +215,8 @@ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 43 5 1>, <&sdma 44 5 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -426,6 +428,8 @@ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -436,6 +440,8 @@ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 16 4 1>, <&sdma 17 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts new file mode 100644 index 000000000000..74e8a6cd8bed --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Aster Board"; + compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + cs-gpios = < + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 4 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>; + status = "okay"; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_csi_gpio_1 + &pinctrl_gpio_2 + &pinctrl_gpio_aster + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + &pinctrl_weim_gpio_5 + >; + + pinctrl_gpio_aster: gpioaster { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 7da74e6f46d9..7272edd85a49 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -17,12 +17,6 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -44,67 +38,6 @@ clock-frequency = <16000000>; clock-output-names = "clk16m"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; }; /* Colibri SSP */ @@ -113,40 +46,21 @@ mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; - reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; + reg = <0>; spi-max-frequency = <10000000>; status = "okay"; }; }; -&hdmi { - status = "okay"; -}; - /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcap_1>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -162,24 +76,6 @@ &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; - - pinctrl_pcap_1: pcap1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ - >; - }; - - pinctrl_mxt_ts: mxttsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&lcd_display_in>; }; &pwm1 { diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts new file mode 100644 index 000000000000..3a6d3889760d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board"; + compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>; + + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + cap-power-off-card; + /* uncomment the following to enable SD card UHS mode if you have a V1.1 module */ + /* /delete-property/ no-1-8-v; */ + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts new file mode 100644 index 000000000000..cf77d894f6d7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris Board"; + compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>; + + /* + * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one + * wants to turn the transceiver off, that property has to be deleted + * and the gpio handled in userspace. + * The same applies to uart-b-c-on-x14-enable where the UART_B and + * UART_C transceiver is turned on. + */ + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; + + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_gpio_iris + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + >; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts deleted file mode 100644 index 223275f028f1..000000000000 --- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include "imx6dl-colibri-eval-v3.dts" -#include "imx6qdl-colibri-v1_1-uhs.dtsi" - -/ { - model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; - compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", - "toradex,colibri_imx6dl-v1_1", - "toradex,colibri_imx6dl-eval-v3", - "toradex,colibri_imx6dl", - "fsl,imx6dl"; -}; - -/* Colibri MMC */ -&usdhc1 { - status = "okay"; - /* - * Please make sure your carrier board does not pull-up any of - * the MMC/SD signals to 3.3 volt before attempting to activate - * UHS-I support. - * To let signaling voltage be changed to 1.8V, please - * delete no-1-8-v property (example below): - * /delete-property/no-1-8-v; - */ -}; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index b4a9523e325b..864dc5018451 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -297,7 +297,11 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index bf72a67a9c76..c52e6caf3996 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -214,7 +214,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; linux,rs485-enabled-at-boot-time; rs485-rts-delay = <0 20>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 0f1616bfa9a8..b72f8ea1e6f6 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 227c952543d4..516ec915a911 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -5,46 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/display/sdtv-standards.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/media/tvp5150.h> -#include <dt-bindings/sound/fsl-imx-audmux.h> #include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" / { model = "Kverneland TGO"; compatible = "kvg,victgo", "fsl,imx6dl"; - chosen { - stdout-path = &uart4; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000 0>; - brightness-levels = <0 16 64 255>; - num-interpolated-steps = <16>; - default-brightness-level = <1>; - power-supply = <®_3v3>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; - }; - - connector { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = <SDTV_STD_PAL_B>; - - port { - comp0_out: endpoint { - remote-endpoint = <&tvp5150_comp0_in>; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -71,36 +38,9 @@ io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - led-0 { - label = "debug0"; - function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - label = "debug1"; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-2 { - label = "power_led"; - function = LED_FUNCTION_POWER; - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; + compatible = "lg,lb070wv8"; + backlight = <&backlight_lcd>; power-supply = <®_3v3>; port { @@ -116,38 +56,6 @@ clock-frequency = <50000000>; }; - reg_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_h1_vbus: regulator-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "h1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_otg_vbus: regulator-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "otg-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - rotary-encoder { compatible = "rotary-encoder"; pinctrl-0 = <&pinctrl_rotary_ch>; @@ -160,33 +68,6 @@ wakeup-source; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "prti6q-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Line", "Line In Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "External Speaker", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&ssi1>; - system-clock-frequency = <0>; - }; - - simple-audio-card,codec { - sound-dai = <&codec>; - bitclock-master; - frame-master; - }; - }; - thermal-zones { chassis-thermal { polling-delay = <20000>; @@ -213,7 +94,6 @@ <&adc_ts 5>; io-channel-names = "y", "z1", "z2", "x"; touchscreen-min-pressure = <64687>; - touchscreen-inverted-x; touchscreen-inverted-y; touchscreen-x-plate-ohms = <300>; touchscreen-y-plate-ohms = <800>; @@ -254,61 +134,6 @@ }; }; -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; - - mux-ssi1 { - fsl,audmux-port = <0>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN 0 - IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TFSDIR 0 - IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) - >; - }; - - mux-pins3 { - fsl,audmux-port = <2>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) - 0 IMX_AUDMUX_V2_PDCR_TXRXEN - >; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; -}; - -&ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -385,36 +210,19 @@ "CAM2_MIRROR", "", "", "SMBALERT", "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpio2 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", - "POWER_LED", "", "", "", "", "", "", ""; -}; - -&gpio3 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", - "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", - "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", - "YACO_RESET"; + "SD1_DATA3", "ETH_MDIO", "", + "", "", "", "", "", "", "", "ETH_MDC"; }; &gpio4 { gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", - "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", - "BL_PWM", "ETH_INTRP", "ISB_LED"; + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INT", "ISB_LED"; }; &gpio5 { @@ -422,51 +230,22 @@ "", "", "", "", "", "", "", "", "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", "ECSPI2_SS0", "ECSPI2_SCLK", "", "", - "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; }; -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: audio-codec@a { - compatible = "fsl,sgtl5000"; - reg = <0xa>; - #sound-dai-cells = <0>; - clocks = <&clks 201>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <®_3v3>; - VDDD-supply = <®_1v8>; - }; - - video-decoder@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tvp5150_comp0_in: endpoint { - remote-endpoint = <&comp0_out>; - }; - }; - - /* Output port 2 is video output pad */ - port@2 { - reg = <2>; - - tvp5151_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - }; - }; - }; +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; +&i2c1 { keypad@70 { compatible = "holtek,ht16k33"; pinctrl-names = "default"; @@ -490,225 +269,9 @@ MATRIX_KEY(6, 1, KEY_F1) >; }; - - /* additional i2c devices are added automatically by the boot loader */ -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - adc@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@5 { - reg = <5>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@6 { - reg = <6>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@7 { - reg = <7>; - ti,gain = <3>; - ti,datarate = <3>; - }; - }; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - tsens0: temperature-sensor@70 { - compatible = "ti,tmp103"; - reg = <0x70>; - #thermal-sensor-cells = <0>; - }; -}; - -&ipu1_csi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0>; - status = "okay"; -}; - -&ipu1_csi0_mux_from_parallel_sensor { - remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; - phy_type = "utmi"; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - phy_type = "utmi"; - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - no-1-8-v; - disable-wp; - cap-sd-highspeed; - no-mmc; - no-sdio; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - bus-width = <8>; - no-1-8-v; - non-removable; - no-sd; - no-sdio; - status = "okay"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; - - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 - /* CAN1_SR */ - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 - /* CAN1_TERM */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 - >; - }; - - pinctrl_can2: can2grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 - /* CAN2_SR */ - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; - pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 @@ -747,113 +310,12 @@ >; }; - pinctrl_hog: hoggrp { - fsl,pins = < - /* ITU656_nRESET */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - /* CAM1_MIRROR */ - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 - /* CAM2_MIRROR */ - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 - /* CAM_nDETECT */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* ISB_IN1 */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 - /* ISB_nIN2 */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 - /* WARN_LIGHT */ - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 - /* ON2_FB */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 - /* YACO_nIRQ */ - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 - /* YACO_BOOT0 */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 - /* YACO_nRESET */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 - /* FORCE_ON1 */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - /* AUDIO_nRESET */ - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 - /* ITU656_nPDN */ - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 is shared with PWM3 */ - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - - /* New in HW revision 1 */ - /* ON1_FB */ - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 - /* DIP1_FB */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; - pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 >; }; - pinctrl_leds: ledsgrp { - fsl,pins = < - /* DEBUG0 */ - MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 - /* DEBUG1 */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 - /* POWER_LED */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 - >; - }; - pinctrl_rotary_ch: rotarychgrp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -867,77 +329,4 @@ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 >; }; - - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - /* YaCO Touchscreen UART */ - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts index 174fd913bf96..5035d303447d 100644 --- a/arch/arm/boot/dts/imx6dl-vicut1.dts +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1 Board"; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 6330d75f8f39..f266f1b7e0cf 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -142,7 +142,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts new file mode 100644 index 000000000000..8768222e183e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for the i.MX6-based Bosch ACC board. + * + * Copyright (C) 2016 Garz & Fricke GmbH + * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de> + * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de> + * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> + * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6q.dtsi" + +/ { + model = "Bosch ACC"; + compatible = "bosch,imx6q-acc", "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc4; + mmc1 = &usdhc2; + serial0 = &uart2; + serial1 = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 200000>; + brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; + num-interpolated-steps = <10>; + default-brightness-level = <60>; + power-supply = <®_lcd>; + }; + + panel { + compatible = "dataimage,fg1001l0dsswmg01"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + refclk: refclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "12mhz_refclk"; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_PODF>, + <&clks IMX6QDL_CLK_OSC>; + assigned-clock-rates = <0>, <12000000>, <0>; + }; + + cpus { + cpu0: cpu@0 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + + cpu1: cpu@1 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led_red: led-0 { + color = <LED_COLOR_ID_RED>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm2 0 500000>; + }; + + led_white: led-1 { + color = <LED_COLOR_ID_WHITE>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm3 0 500000>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_gpio_led>; + + led-2 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_5p0: regulator-5p0 { + compatible = "regulator-fixed"; + regulator-name = "5p0"; + }; + + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_h2_vbus: regulator-usb-h2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5p0> ; + regulator-always-on; + }; + + reg_vsnvs: regulator-vsnvs { + compatible = "regulator-fixed"; + regulator-name = "VSNVS_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_enable>; + gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_dac: regulator-dac { + compatible = "regulator-fixed"; + regulator-name = "vref_dac"; + regulator-min-microvolt = <20000>; + regulator-max-microvolt = <20000>; + vin-supply = <®_5p0> ; + regulator-boot-on; + }; + + reg_sw4: regulator-sw4 { + compatible = "regulator-fixed"; + regulator-name = "SW4_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_sys: regulator-sys { + compatible = "regulator-fixed"; + regulator-name = "SYS_4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; +}; + +®_arm { + vin-supply = <&sw2_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +®_vdd1p1 { + vin-supply = <®_vsnvs>; +}; + +®_vdd2p5 { + vin-supply = <®_vsnvs>; +}; + +®_vdd3p0 { + vin-supply = <®_vsnvs>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + phy-mode = "rmii"; + phy-supply = <®_sw4>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpu_vg { + status = "disabled"; +}; + +&gpu_2d { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1c_reg: sw1c { + regulator-name = "VDD_SOC (sw1abc)"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-name = "VDD_ARM (sw2)"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5a"; + regulator-boot-on; + regulator-always-on; + + }; + + sw3b_reg: sw3b { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5b"; + regulator-boot-on; + regulator-always-on; + + }; + + sw4_reg: sw4 { + regulator-name = "AUX 3V15 (sw4)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + status = "disabled"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + lm75: sensor@49 { + compatible = "national,lm75b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm75>; + reg = <0x49>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@51 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + eeprom_ext: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + usb3503: usb@8 { + compatible = "smsc,usb3503"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503>; + reg = <0x08>; + connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */ + intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */ + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */ + initial-mode = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + refclk-frequency = <12000000>; + }; + + exc3000: touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctouch>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + + vcnl4035: light-sensor@60 { + compatible = "vishay,vcnl4035"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_proximity>; + reg = <0x60>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + vbus-supply = <®_usb_h2_vbus>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphynop1 { + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + clock-names = "main_clk"; + vcc-supply = <®_usb_h1_vbus>; +}; + +&usbphynop2 { + vcc-supply = <®_usb_h2_vbus>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + timeout-sec=<10>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_reset_gpio_led: reset-gpio-led-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd_enable: lcdenablegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */ + >; + }; + + pinctrl_lm75: lm75grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_proximity: proximitygrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */ + >; + }; + + pinctrl_ctouch: ctouch-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh2_idle: usbh2-idle-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018 + >; + }; + + pinctrl_usbh2_active: usbh2-active-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018 + >; + }; + + pinctrl_usb3503: usb3503-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */ + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059 + >; + }; + + pinctrl_wdog1: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 10922375c51e..ead83091e193 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index bfb530f29d9d..1ad41c944b4b 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -260,7 +260,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index c713ac03b3b9..9591848cbd37 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -102,7 +102,7 @@ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 48fb47e715f6..137db38f0d27 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 4cde45d5c90c..e894faba571f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 05ee28388229..cc1801002394 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -100,7 +100,7 @@ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 1767e1a3cd53..271f4b2d9b9f 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts index 0a4e251be162..dd91aff3f9e2 100644 --- a/arch/arm/boot/dts/imx6q-vicut1.dts +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -6,12 +6,9 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; }; - -&sata { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e21f6ac864e5..baa197c90060 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -96,7 +96,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 0b90c3f59f89..6b64b2fc3995 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -131,7 +131,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi deleted file mode 100644 index 7672fbfc29be..000000000000 --- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -&iomuxc { - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 - >; - }; -}; - -/* Colibri MMC */ -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <&vgen3_reg>; - wakeup-source; - keep-power-in-suspend; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 4e2a309c93fa..c383e0e4110c 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -13,13 +13,79 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; + power-supply = <®_module_3v3>; pwms = <&pwm3 0 5000000>; - enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + panel_dpi: panel-dpi { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; @@ -38,36 +104,36 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6dl-colibri-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HP_OUT", "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias"; + model = "imx6dl-colibri-sgtl5000"; mux-int-port = <1>; mux-ext-port = <5>; + ssi-controller = <&ssi1>; }; /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -92,6 +158,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Colibri SSP */ &ecspi4 { cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; @@ -101,10 +171,10 @@ }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-handle = <ðphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; status = "okay"; mdio { @@ -118,6 +188,224 @@ }; }; +&gpio1 { + gpio-line-names = "", + "SODIMM_67", + "SODIMM_180", + "SODIMM_196", + "SODIMM_174", + "SODIMM_176", + "SODIMM_194", + "SODIMM_55", + "SODIMM_63", + "SODIMM_28", + "SODIMM_93", + "SODIMM_69", + "SODIMM_99", + "SODIMM_130", + "SODIMM_106", + "SODIMM_98", + "SODIMM_192", + "SODIMM_49", + "SODIMM_190", + "SODIMM_51", + "SODIMM_47", + "SODIMM_53", + "", + "SODIMM_22"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_132", + "SODIMM_134", + "SODIMM_135", + "SODIMM_133", + "SODIMM_102", + "SODIMM_43", + "SODIMM_127", + "SODIMM_37", + "SODIMM_104", + "SODIMM_59", + "SODIMM_30", + "SODIMM_100", + "SODIMM_38", + "SODIMM_34", + "SODIMM_32", + "SODIMM_36", + "SODIMM_59", + "SODIMM_67", + "SODIMM_97", + "SODIMM_79", + "SODIMM_103", + "SODIMM_101", + "SODIMM_45", + "SODIMM_105", + "SODIMM_107", + "SODIMM_91", + "SODIMM_89", + "SODIMM_150", + "SODIMM_126", + "SODIMM_128", + "", + "SODIMM_94"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_110", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "", + "SODIMM_96", + "SODIMM_77", + "SODIMM_25", + "SODIMM_27", + "SODIMM_88", + "SODIMM_90", + "SODIMM_31", + "SODIMM_23", + "SODIMM_29", + "SODIMM_71", + "SODIMM_73", + "SODIMM_92", + "SODIMM_81", + "SODIMM_131", + "SODIMM_129"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "SODIMM_168", + "", + "", + "", + "", + "SODIMM_184", + "SODIMM_186", + "HDMI_15", + "HDMI_16", + "SODIMM_178", + "SODIMM_188", + "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_24", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_95", + "", + "SODIMM_86", + "", + "SODIMM_65", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146", + "SODIMM_172", + "SODIMM_170", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153", + "SODIMM_155", + "SODIMM_157", + "SODIMM_159", + "SODIMM_161", + "SODIMM_163", + "SODIMM_33", + "SODIMM_35", + "SODIMM_165", + "SODIMM_167"; +}; + +&gpio6 { + gpio-line-names = "SODIMM_169", + "SODIMM_171", + "SODIMM_173", + "SODIMM_175", + "SODIMM_177", + "SODIMM_179", + "SODIMM_85", + "SODIMM_166", + "SODIMM_160", + "SODIMM_162", + "SODIMM_158", + "SODIMM_164", + "", + "", + "SODIMM_156", + "SODIMM_75", + "SODIMM_154", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_152"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_19", + "SODIMM_21", + "", + "SODIMM_137"; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_ddc>; @@ -132,65 +420,66 @@ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; - pinctrl-0 = <&pinctrl_i2c2_gpio>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; /* vgen1: unused */ vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; /* @@ -198,57 +487,58 @@ * the i.MX 6 NVCC_SD1. */ vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; + lrclk-strength = <3>; + reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; - lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; interrupt-controller; id = <0>; - blocks = <0x5>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -258,7 +548,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -273,9 +563,10 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; @@ -294,6 +585,21 @@ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + status = "disabled"; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; }; /* Colibri PWM<B> */ @@ -338,27 +644,27 @@ /* Colibri UART_A */ &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_B */ &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_C */ &uart3 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_dte>; - fsl,dte-mode; status = "disabled"; }; @@ -370,24 +676,28 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ - disable-wp; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; no-1-8-v; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -405,14 +715,36 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh_oc_1>; + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pin group conflicts with pin groups + * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0xb0b1 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1 /* SODIMM 30 */ + >; + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + /* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and + * pinctrl_weim_cs2. Don't use them simultaneously. + */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0xb0b1 /* SODIMM_107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1 /* SODIMM_106 */ + >; + }; + pinctrl_audmux: audmuxgrp { fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 >; }; @@ -423,28 +755,52 @@ >; }; + /* CSI pins used as GPIOs */ + pinctrl_csi_gpio_1: csigpio1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x1b0b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_csi_gpio_2: csigpio2grp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 + >; + }; + pinctrl_ecspi4: ecspi4grp { fsl,pins = < + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - /* SPI CS */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) >; }; @@ -462,13 +818,32 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_1: gpio1grp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + pinctrl_gpio_2: gpio2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 >; }; - pinctrl_gpio_keys: gpiokeys { + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; @@ -483,15 +858,15 @@ pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 >; }; - pinctrl_i2c2_gpio: i2c2grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 >; }; @@ -523,8 +898,8 @@ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 /* Disable PWM pins on camera interface */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 >; }; @@ -555,19 +930,34 @@ >; }; - pinctrl_mic_gnd: gpiomicgnd { + pinctrl_lvds_transceiver: lvdstxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM 95 */ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b030 /* SODIMM 55 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x03030 /* SODIMM 63 */ + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM 99 */ + >; + }; + + pinctrl_mic_gnd: micgndgrp { fsl,pins = < /* Controls Mic GND, PU or '1' pull Mic GND to GND */ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 >; }; - pinctrl_mmc_cd: gpiommccd { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 @@ -576,15 +966,15 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; @@ -601,13 +991,6 @@ >; }; - pinctrl_usbh_oc_1: usbhoc1grp { - fsl,pins = < - /* USBH_OC */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 - >; - }; - pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -650,9 +1033,9 @@ pinctrl_uart2_dte: uart2dtegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 >; }; @@ -667,20 +1050,27 @@ fsl,pins = < /* USBC_DET */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* USBC_DET_EN */ - MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 /* USBC_DET_OVERWRITE */ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 >; }; - pinctrl_usbc_id_1: usbc_id-1 { + pinctrl_usbc_id_1: usbcid1grp { fsl,pins = < /* USBC_ID */ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 @@ -692,6 +1082,40 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; + + /* avoid backfeeding with removed card power */ + pinctrl_usdhc1_sleep: usdhc1sleepgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -730,135 +1154,136 @@ >; }; - pinctrl_weim_sram: weimsramgrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 - /* Data */ - MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 - MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 - MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 - MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 - /* Address */ - MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - pinctrl_weim_rdnwr: weimrdnwr { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 - MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 - >; - }; - - pinctrl_weim_npwe: weimnpwe { - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 - MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 - >; - }; - /* ADDRESS[16:18] [25] used as GPIO */ - pinctrl_weim_gpio_1: weimgpio-1 { + pinctrl_weim_gpio_1: weimgpio1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* ADDRESS[19:24] used as GPIO */ - pinctrl_weim_gpio_2: weimgpio-2 { + pinctrl_weim_gpio_2: weimgpio2grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* DATA[16:31] used as GPIO */ - pinctrl_weim_gpio_3: weimgpio-3 { + pinctrl_weim_gpio_3: weimgpio3grp { fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 >; }; /* DQM[0:3] used as GPIO */ - pinctrl_weim_gpio_4: weimgpio-4 { + pinctrl_weim_gpio_4: weimgpio4grp { fsl,pins = < MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 >; }; /* RDY used as GPIO */ - pinctrl_weim_gpio_5: weimgpio-5 { + pinctrl_weim_gpio_5: weimgpio5grp { fsl,pins = < MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 >; }; /* ADDRESS[16] DATA[30] used as GPIO */ - pinctrl_weim_gpio_6: weimgpio-6 { + pinctrl_weim_gpio_6: weimgpio6grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_weim_npwe: weimnpwegrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + /* Data */ + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + /* Ctrl */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwrgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 648f5fcb72e6..2c1d6f28e695 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -35,7 +35,7 @@ pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf040b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index b167b33bd108..095c9143d99a 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -258,7 +258,7 @@ status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ - smarc_flash: spi-flash@0 { + smarc_flash: flash@0 { compatible = "winbond,w25q16dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index ac34709e9741..0ad4cb4f1e82 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -179,7 +179,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index c96f4d7e1e0d..beaa2dcd436c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -321,7 +321,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 92d09a3ebe0e..ee7e2371f94b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -252,7 +252,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 49da30d7510c..904d5d051d63 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -237,7 +237,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1f2ba6f6254e..768bc0e3a2b3 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -47,12 +47,12 @@ pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; - green { + led_green: green { label = "phyflex:green"; gpios = <&gpio1 30 0>; }; - red { + led_red: red { label = "phyflex:red"; gpios = <&gpio2 31 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 5e58740d40c5..1368a4762037 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -272,7 +272,7 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index eb9a0b104f1c..901b9a761b66 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0c0105468a2f..37482a9023fc 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -197,7 +197,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index bcc5bbcce769..f41f86a76ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -264,11 +264,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-reset-post-delay = <10>; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index ccfa8e320be6..93a8123da27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -295,7 +295,7 @@ pinctrl-0 = <&pinctrl_usbh>; vbus-supply = <®_usb_h1_vbus>; clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; + status = "disabled"; }; &usbotg { diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi new file mode 100644 index 000000000000..f505f2704530 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 Protonic Holland + */ + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index 1ac7e13249d2..a1676b5d2980 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -16,18 +16,27 @@ stdout-path = &uart4; }; - backlight: backlight { + backlight_lcd: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; - default-brightness-level = <1>; + default-brightness-level = <48>; power-supply = <®_3v3>; enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; + backlight_led: backlight_led { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <48>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -61,54 +70,37 @@ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds>; led-0 { - label = "LED_DI0_DEBUG_0"; + label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { - label = "LED_DI0_DEBUG_1"; + label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; led-2 { - label = "POWER_LED"; + label = "power_led"; function = LED_FUNCTION_POWER; gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; - power-supply = <®_3v3>; - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; + led-3 { + label = "isb_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -135,18 +127,6 @@ enable-active-high; }; - reg_wifi: regulator-wifi { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wifi_npd>; - regulator-name = "wifi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <70000>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,name = "prti6q-sgtl5000"; @@ -173,6 +153,14 @@ frame-master; }; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + }; }; &audmux { @@ -232,47 +220,13 @@ }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", - "SDIO_D2", "SDIO_D1", "SDIO_D0", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", - "WL_IRQ", "ETH_MDC"; -}; - &gpio2 { gpio-line-names = - "count0", "count1", "count2", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "", "ON_SWITCH", - "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; + "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", + "", "LED_PWM", "", "", "", + "", "", "", + "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; }; &gpio3 { @@ -281,37 +235,8 @@ "", "", "", "", "", "", "", "", "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", - "", "", "", "", "", "", "", ""; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", - "", "", "", "", "BL_EN", "BL_PWM", "", ""; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", - "PCIE_RESET", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; }; &gpio7 { @@ -406,9 +331,10 @@ reg = <0x51>; }; - temperature-sensor@70 { + tsens0: temperature-sensor@70 { compatible = "ti,tmp103"; reg = <0x70>; + #thermal-sensor-cells = <0>; }; }; @@ -438,13 +364,15 @@ }; }; -&pcie { +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; -&pwm1 { +&pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; @@ -460,12 +388,6 @@ status = "okay"; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -513,26 +435,6 @@ status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_wifi>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - no-1-8-v; - no-mmc; - no-sd; - status = "okay"; - - wifi { - compatible = "ti,wl1271"; - interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; - }; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -613,29 +515,6 @@ >; }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - pinctrl_hog: hoggrp { fsl,pins = < /* ITU656_nRESET */ @@ -646,8 +525,6 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* CAM_nDETECT */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 /* ISB_IN1 */ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 /* ISB_nIN2 */ @@ -669,27 +546,11 @@ /* ITU656_nPDN */ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - /* New in HW revision 1 */ /* ON1_FB */ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* DIP1_FB */ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - - /* New in UT2: FIXME: ISB PWM should start off, PD */ - /* ISB_LED_PWM */ - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 >; }; @@ -729,6 +590,8 @@ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 /* POWER_LED */ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + /* ISB_LED */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 >; }; @@ -738,20 +601,17 @@ >; }; - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 >; }; - pinctrl_uart2: uart2grp { + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; @@ -797,19 +657,6 @@ >; }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - /* WL12xx IRQ */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 @@ -825,10 +672,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 >; }; - - pinctrl_wifi_npd: wifinpdgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts index 7bad7ca6b12e..49ff145fffe5 100644 --- a/arch/arm/boot/dts/imx6qp-vicutp.dts +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6qp.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1P Board"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 25f6f2fb1555..f16c830f1e91 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c7d907c5c352..06a515121dfc 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -50,7 +50,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 66af78e83b70..a2c79bcf9a11 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -107,7 +107,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index dce5dcf96c25..7dda42553f4b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -133,7 +133,7 @@ spi-tx-bus-width = <4>; }; - flash1: s25fl128s@2 { + flash1: flash@2 { reg = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 99f4cf777a38..969cfe920d25 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -108,7 +108,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; @@ -118,7 +118,7 @@ reg = <0>; }; - flash1: n25q256a@2 { + flash1: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index a3fde3316c73..1a18c41ce385 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -286,7 +286,7 @@ pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index 47d3ce5d255f..acd936540d89 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -19,7 +19,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi index a095a7654ac6..29ed38dce580 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index 770f59b23102..a6cf0f21c66d 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -178,7 +178,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 2a449a3c1ae2..09a83dbdf651 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -19,7 +19,7 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi index 205e4d462702..ec042648bd98 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -11,7 +11,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <5>; power-supply = <®_backlight_en>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; status = "disabled"; }; @@ -91,7 +91,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi new file mode 100644 index 000000000000..eca94ed6451b --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULxL + * - TQMa6ULLx + * - TQMa6ULLxL + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <6250>; + /* not used */ + }; + + reg_sw1b_core: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sw3_ddr: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + /* not used */ + }; + + reg_snvs_3v0: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vccsd: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + reg_v33_3v3: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vldo1_3v3: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo2: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vldo3: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo4: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + jc42_1a: eeprom-temperature-sensor@1a { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + + m24c64_50: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + m24c02_52: eeprom@52 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + read-only; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + /* + * PMIC & temperature sensor IRQ + * Both do currently not use IRQ + * potentially dangerous if used on baseboard + */ + pmic-int-hog { + gpio-hog; + gpios = <24 0>; + input; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + +/* eMMC */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz" , "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + + bus-width = <8>; + disable-wp; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4_recovery: i2c4recoverygrp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0 + >; + }; + + pinctrl_pmic: pmic { + fsl,pins = < + /* PMIC irq */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts new file mode 100644 index 000000000000..f2a5f17f312e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul1.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage) + * and need to be disabled here again + */ +&can2 { + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&fec2 { + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&iomuxc { + pinctrl_enet1_mdc: enet1mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi new file mode 100644 index 000000000000..24192d012ef7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul-tqma6ul2.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM"; + compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * There are no module specific differences compared to TQMa6UL2, + * only external interfaces differ + */ + +/* + * Devices not available on i.MX6ULG1 and should not be enabled on + * mainboard level (again) + */ +&can2 { + status = "disabled"; +}; + +&csi { + status = "disabled"; +}; + +&fec2 { + status = "disabled"; +}; + +&lcdif { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts new file mode 100644 index 000000000000..0757df2b8f48 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi new file mode 100644 index 000000000000..e2e95dd92263 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2 SoM"; + compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step = <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts new file mode 100644 index 000000000000..9d9b6b744a1c --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi new file mode 100644 index 000000000000..caf2c5d03f7e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2L SoM"; + compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi new file mode 100644 index 000000000000..5afb9046c202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULLx + */ + +&m24c64_50 { + vcc-supply = <®_sw2>; +}; + +&m24c02_52 { + vcc-supply = <®_sw2>; +}; + +®_sw2 { + regulator-boot-on; + regulator-always-on; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_sw2>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi new file mode 100644 index 000000000000..ba84a4f70ebd --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULxL + * - TQMa6ULLxL + */ + +/ { + reg_vin: reg-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&m24c64_50 { + vcc-supply = <®_vin>; +}; + +&m24c02_52 { + vcc-supply = <®_vin>; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_vin>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts new file mode 100644 index 000000000000..d3f2fb7c6c1e --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi new file mode 100644 index 000000000000..c9133ba2d705 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + num-cs = <2>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ + &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ + >; +}; + +/* + * Following SODIMM Pins should not be accessed as GPIO on Aster board: + * 134 - AIN5_SCL (no connection) + * 127 - Voltage Level Translator OE# signal (IC11 and IC12) + * + * To configure GPIO to LED5, please disable FEC2 and uncomment the following: + * &iomuxc { + * pinctrl-names = "default"; + * pinctrl-0 = < + * &pinctrl_gpio1 + * &pinctrl_gpio2 + * &pinctrl_gpio3 + * &pinctrl_gpio4 + * &pinctrl_gpio6 - for non-WiFi modules only + * &pinctrl_gpio7 + * &pinctrl_gpio_aster + * >; + * + * pinctrl_gpio_aster: gpio-aster { + * fsl,pins = < + * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 + * >; + * }; + * }; + */ + +&i2c1 { + status = "okay"; + + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts new file mode 100644 index 000000000000..919c0464d6cb --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-emmc-aster", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts new file mode 100644 index 000000000000..b9060c2f7977 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts new file mode 100644 index 000000000000..0ab71f2f5daa --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-emmc-iris", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi index a099abfdfa27..ea238525d5c0 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2021 Toradex + * Copyright 2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -8,7 +8,7 @@ / { aliases { mmc0 = &usdhc2; /* eMMC */ - mmc1 = &usdhc1; /* MMC 4bit slot */ + mmc1 = &usdhc1; /* MMC 4-bit slot */ }; memory@80000000 { @@ -154,6 +154,7 @@ "SODIMM_127"; }; +/* NAND */ &gpmi { status = "disabled"; }; @@ -170,6 +171,7 @@ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; +/* eMMC */ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2emmc>; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts index 08669a18349e..9bf7111d7b00 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; @@ -9,6 +9,6 @@ #include "imx6ull-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index a78849fd2afa..e29907428c20 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ / { @@ -8,20 +8,6 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; @@ -29,18 +15,6 @@ clock-frequency = <16000000>; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -71,14 +45,6 @@ status = "okay"; }; -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - pwms = <&pwm4 0 5000000 1>; - status = "okay"; -}; - &ecspi1 { status = "okay"; @@ -107,16 +73,6 @@ }; }; -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - /* PWM <A> */ &pwm4 { status = "okay"; @@ -150,6 +106,7 @@ }; &usbotg1 { + vbus-supply = <®_usbh_vbus>; status = "okay"; }; @@ -159,20 +116,6 @@ }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; - cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - disable-wp; - wakeup-source; - keep-power-in-suspend; vmmc-supply = <®_3v3>; - vqmmc-supply = <®_sd1_vmmc>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts new file mode 100644 index 000000000000..afc1e0119783 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..93649cad0cc0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +#include "imx6ull-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + + +&usdhc1 { + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts new file mode 100644 index 000000000000..4fb97b0fe30b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi new file mode 100644 index 000000000000..7f3b37baba88 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&gpio1 { + /* + * uart25_tx_on turns the UART transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + * The same applies to uart1_tx_on. + */ + uart25_tx_on { + gpio-hog; + gpios = <15 0>; + output-high; + }; +}; + +&gpio2 { + uart1_tx_on { + gpio-hog; + gpios = <7 0>; + output-high; + }; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index 95a11b8bcbdb..88901db255d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -12,13 +12,150 @@ }; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts new file mode 100644 index 000000000000..b4f65e8c5857 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-wifi-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts index df72ce1ae2cb..1d64d1a5d8a7 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts new file mode 100644 index 000000000000..ce02f8a9ddd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-wifi-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts new file mode 100644 index 000000000000..5ac1aa298ce7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-wifi-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 9f1e38282bee..db59ee6b1c86 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -23,16 +23,152 @@ clock-frequency = <792000000>; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "", + "", + "", + "", + "", + "", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "", + "", + "", + "", + "SODIMM_105"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>; + pinctrl-0 = <&pinctrl_snvs_gpio1>; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 951a2a6c5a65..15621e03fa4d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -1,22 +1,54 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018-2021 Toradex + * Copyright 2018-2022 Toradex */ #include "imx6ull.dtsi" / { + /* Ethernet aliases to ensure correct MAC addresses */ aliases { ethernet0 = &fec2; ethernet1 = &fec1; }; - bl: backlight { + backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - status = "disabled"; + power-supply = <®_3v3>; + pwms = <&pwm4 0 5000000 1>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + power-supply = <®_3v3>; + status = "okay"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { @@ -35,7 +67,7 @@ regulator-max-microvolt = <3300000>; }; - reg_sd1_vmmc: regulator-sd1-vmmc { + reg_sd1_vqmmc: regulator-sd1-vqmmc { compatible = "regulator-gpio"; gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -47,11 +79,25 @@ states = <1800000 0x1 3300000 0x0>; vin-supply = <®_module_3v3>; }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed-clock"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + regulator-type = "voltage"; + vin-supply = <®_module_3v3>; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + startup-delay-us = <150000>; + }; }; &adc1 { num-channels = <10>; vref-supply = <®_module_3v3_avdd>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; }; &can1 { @@ -73,12 +119,14 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; +/* Ethernet */ &fec2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_eth_phy>; status = "okay"; mdio { @@ -93,9 +141,11 @@ }; }; +/* NAND */ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; + fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; nand-ecc-strength = <8>; @@ -103,15 +153,35 @@ status = "okay"; }; +/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; }; +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ &i2c2 { + /* Use low frequency to compensate for the high pull-up values. */ + clock-frequency = <40000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -119,7 +189,7 @@ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - ad7879@2c { + ad7879_ts: touchscreen@2c { compatible = "adi,ad7879-1"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_ad7879_int>; @@ -140,23 +210,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* PWM <A> */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; +/* PWM <B> */ &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; }; +/* PWM <C> */ &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; }; +/* PWM <D> */ &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; @@ -170,6 +250,7 @@ status = "disabled"; }; +/* Colibri UART_A */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; @@ -177,6 +258,7 @@ fsl,dte-mode; }; +/* Colibri UART_B */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -184,12 +266,14 @@ fsl,dte-mode; }; +/* Colibri UART_C */ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; fsl,dte-mode; }; +/* Colibri USBC */ &usbotg1 { dr_mode = "otg"; srp-disable; @@ -197,14 +281,28 @@ adp-disable; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; }; +/* Colibri MMC/SD */ &usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>; assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + bus-width = <4>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ + disable-wp; + keep-power-in-suspend; + no-1-8-v; + vqmmc-supply = <®_sd1_vqmmc>; + wakeup-source; }; &wdog1 { @@ -214,13 +312,36 @@ }; &iomuxc { - pinctrl_can_int: canint-grp { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */ + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */ + >; + }; + + pinctrl_atmel_adap: atmeladapgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */ + >; + }; + + pinctrl_atmel_conn: atmelconngrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + + pinctrl_can_int: canintgrp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ >; }; - pinctrl_enet2: enet2-grp { + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 @@ -235,7 +356,7 @@ >; }; - pinctrl_enet2_sleep: enet2sleepgrp { + pinctrl_enet2_sleep: enet2-sleepgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 @@ -250,13 +371,13 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs-grp { + pinctrl_ecspi1_cs: ecspi1csgrp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ >; }; - pinctrl_ecspi1: ecspi1-grp { + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ @@ -264,27 +385,27 @@ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 >; }; - pinctrl_gpio_bl_on: gpio-bl-on-grp { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ >; }; - pinctrl_gpio1: gpio1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ @@ -297,7 +418,7 @@ >; }; - pinctrl_gpio2: gpio2-grp { /* Camera */ + pinctrl_gpio2: gpio2grp { /* Camera */ fsl,pins = < MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ @@ -307,26 +428,20 @@ >; }; - pinctrl_gpio3: gpio3-grp { /* CAN2 */ + pinctrl_gpio3: gpio3grp { /* CAN2 */ fsl,pins = < MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ >; }; - pinctrl_gpio4: gpio4-grp { + pinctrl_gpio4: gpio4grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ >; }; - pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - >; - }; - - pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + pinctrl_gpio6: gpio6grp { /* Wifi pins */ fsl,pins = < MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ @@ -338,7 +453,7 @@ >; }; - pinctrl_gpio7: gpio7-grp { /* CAN1 */ + pinctrl_gpio7: gpio7grp { /* CAN1 */ fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ @@ -347,9 +462,9 @@ /* * With an eMMC instead of a raw NAND device the following pins - * are available at SODIMM pins + * are available at SODIMM pins. */ - pinctrl_gpmi_gpio: gpmi-gpio-grp { + pinctrl_gpmi_gpio: gpmigpiogrp { fsl,pins = < MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ @@ -358,7 +473,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 @@ -377,35 +492,35 @@ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c1_gpio: i2c1-gpio-grp { + pinctrl_i2c1_gpio: i2c1-gpiogrp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c2: i2c2-grp { + pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0 >; }; - pinctrl_i2c2_gpio: i2c2-gpio-grp { + pinctrl_i2c2_gpio: i2c2-gpiogrp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0 >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ @@ -428,7 +543,7 @@ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ @@ -437,31 +552,31 @@ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ >; }; - pinctrl_pwm5: pwm5-grp { + pinctrl_pwm5: pwm5grp { fsl,pins = < MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ >; }; - pinctrl_pwm6: pwm6-grp { + pinctrl_pwm6: pwm6grp { fsl,pins = < MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ >; }; - pinctrl_pwm7: pwm7-grp { + pinctrl_pwm7: pwm7grp { fsl,pins = < MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ @@ -470,16 +585,16 @@ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */ fsl,pins = < - MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */ - MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */ - MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */ - MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */ + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ @@ -487,23 +602,23 @@ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ >; }; - pinctrl_uart5: uart5-grp { + pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ >; }; - pinctrl_usbh_reg: gpio-usbh-reg { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */ + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ @@ -511,10 +626,10 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 @@ -522,25 +637,25 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; - pinctrl_usdhc2: usdhc2-grp { + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; @@ -561,7 +676,7 @@ >; }; - pinctrl_wdog: wdog-grp { + pinctrl_wdog: wdoggrp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 >; @@ -569,65 +684,59 @@ }; &iomuxc_snvs { - pinctrl_snvs_gpio1: snvs-gpio1-grp { + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ - MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ >; }; - pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ - >; - }; - - pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */ fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ >; }; - pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ + pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */ fsl,pins = < MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; - pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + pinctrl_snvs_reg_sd: snvsregsdgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; - pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + pinctrl_snvs_usbc_det: snvsusbcdetgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; - pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + pinctrl_snvs_gpiokeys: snvsgpiokeysgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */ >; }; - pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 >; }; - pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + pinctrl_snvs_wifi_pdn: snvswifipdngrp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 >; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi index b7e984284e1a..d000606c0704 100644 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts new file mode 100644 index 000000000000..14adb87da911 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-emmc", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* EMMC-Version */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts new file mode 100644 index 000000000000..ae396ac63443 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-nand", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* NAND-Version */ +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi new file mode 100644 index 000000000000..5464a52a1f94 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" + +/ { + + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key { + label = "KEY-A"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + wakeup-source; + }; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_s25fl064_hold: regulator-s25fl064-hold { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_s25fl064_hold>; + compatible = "regulator-fixed"; + regulator-name = "s25fl064_hold"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_hub_vbus: regulator-hub-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhubpwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_hub_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>, + <&pinctrl_user_leds_snvs>; + + user-led1 { + label = "yellow"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + + user-led2 { + label = "red"; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, + <&pinctrl_ecspi1_cs>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>, + <&gpio3 10 GPIO_ACTIVE_LOW>, + <&gpio3 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm_tis: tpm@1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + compatible = "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + + s25fl064: flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = " jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <40000000>; + m25p,fast-read; + status = "disabled"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + dmas = <&sdma 7 8 0>, + <&sdma 8 8 0>; + dma-names = "rx", "tx"; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp102: tmp@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + status = "okay"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* UART4 * RS485 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* UART5 * RS232 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_hub_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc2 { + status = "disabled"; +}; + +&iomuxc_snvs { + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_usbhubpwr: usbhubpwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059 + >; + }; + + pinctrl_user_leds_snvs: user_ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; +}; + +&iomuxc { + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0 + >; + }; + + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0 + >; + }; + + princtrl_flexcan2_en: flexcan2engrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0 + MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0 + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0 + MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0 + >; + }; + + pinctrl_s25fl064_hold: s25fl064holdgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80 + >; + }; + + pinctrl_usbotg1pwr: usbotg1pwrgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts new file mode 100644 index 000000000000..e593b7036fc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi new file mode 100644 index 000000000000..326e6da91ed4 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM"; + compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts new file mode 100644 index 000000000000..33437aae9822 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi new file mode 100644 index 000000000000..8e4d5cd18614 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM"; + compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts new file mode 100644 index 000000000000..c6b32064a009 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2020 PHYTEC Messtechnik GmbH +// Author: Jens Lang <J.Lang@phytec.de> +// Copyright (C) 2021 Fabio Estevam <festevam@denx.de> + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx7d.dtsi" + +/ { + model = "Storopack SMEGW01 board"; + compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + mmc2 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_lte_on: regulator-lte-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_on>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lte_on"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_lte_nreset: regulator-lte-nreset { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_nreset>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "LTE_nReset"; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "wifi_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_rfkill: regulator-wlan-rfkill { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-2 = <&pinctrl_rfkill>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan_rfkill"; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + sram@0 { + compatible = "microchip,48l640"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + i2c_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x52>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_lpsr>; + dr_mode = "otg"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + sd-uhs-ddr50; + mmc-ddr-1_8v; + vmmc-supply = <®_wifi>; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + max-frequency = <200000000>; + bus-width = <8>; + fsl,tuning-step = <1>; + non-removable; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 + >; + }; + + pinctrl_lte_on: lteongrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_lte_nreset: ltenresetgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 + >; + }; + + pinctrl_rfkill: rfkillrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 + >; + }; + + pinctrl_usbotg1_lpsr: usbotg1 { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 + >; + }; + + pinctrl_usbotg1_pwr: usbotg1-pwr { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 + >; + }; + + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x0f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5af6d58666f4..008e3da460f1 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -446,7 +446,7 @@ status = "disabled"; }; - iomuxc_lpsr: iomuxc-lpsr@302c0000 { + iomuxc_lpsr: pinctrl@302c0000 { compatible = "fsl,imx7d-iomuxc-lpsr"; reg = <0x302c0000 0x10000>; fsl,input-sel = <&iomuxc>; diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts new file mode 100644 index 000000000000..6a9c10decf52 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000000..77b911b06041 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 66fec5f5d081..5d6d074011df 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -137,10 +137,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index d800f26b6275..88be868cf71e 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -392,7 +392,7 @@ pinctrl-0 = <&qspi_pins>; cdns,rclk-en; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl512s", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index 2a2d38cf0fff..bd84d7f0f2fe 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -325,7 +325,7 @@ cdns,rclk-en; status = "okay"; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index ad4e22afe133..4a91f5ded402 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -161,10 +161,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index e200533d26a4..1c880cf8fa91 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -110,10 +110,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index b3ad3f607d31..c32300611d2c 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -78,7 +78,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 217bd374e52b..8f6c387d3a8b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -198,7 +198,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts new file mode 100644 index 000000000000..0f555eb45bda --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 6G-2GS"; + compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; + + aliases { + i2c0 = &i2c4; + i2c1 = &i2c1; + }; + + sfp0: sfp0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx1 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c1: i2c@600 { + pinctrl-0 = <&fc1_c_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c4: i2c@600 { + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&gpio { + fc1_c_pins: fc1-c-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_47", "GPIO_48"; + function = "fc1_c"; + }; + + fc4_b_pins: fc4-b-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + sfp = <&sfp0>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + sfp = <&sfp1>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts new file mode 100644 index 000000000000..5feef9a59a79 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 8G + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 8G"; + compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; +}; + +&mdio0 { + phy2: ethernet-phy@3 { + reg = <3>; + }; + + phy3: ethernet-phy@4 { + reg = <4>; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + phy-handle = <&phy2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + phy-handle = <&phy3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi new file mode 100644 index 000000000000..4cab1b3b3b29 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common part of the device tree for the Kontron KSwitch D10 MMT + */ + +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + aliases { + serial0 = &usart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + usart0: serial@200 { + pinctrl-0 = <&usart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + spi3: spi@400 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* SCK, MISO, MOSI */ + pins = "GPIO_51", "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + miim_c_pins: miim-c-pins { + /* MDC, MDIO */ + pins = "GPIO_59", "GPIO_60"; + function = "miim_c"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1 */ + pins = "GPIO_32", "GPIO_33", "GPIO_34"; + function = "sgpio_a"; + }; + + sgpio_b_pins: sgpio-b-pins { + /* LD */ + pins = "GPIO_64"; + function = "sgpio_b"; + }; + + usart0_pins: usart0-pins { + /* RXD, TXD */ + pins = "GPIO_25", "GPIO_26"; + function = "fc0_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_c_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + clock-frequency = <2500000>; + status = "okay"; + + phy4: ethernet-phy@5 { + reg = <5>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy5: ethernet-phy@6 { + reg = <6>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy6: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy7: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phys = <&serdes 0 CU(0)>; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port1 { + phys = <&serdes 1 CU(1)>; + phy-handle = <&phy1>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port4 { + phys = <&serdes 4 SERDES6G(2)>; + phy-handle = <&phy4>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port5 { + phys = <&serdes 5 SERDES6G(2)>; + phy-handle = <&phy5>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port6 { + phys = <&serdes 6 SERDES6G(2)>; + phy-handle = <&phy6>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port7 { + phys = <&serdes 7 SERDES6G(2)>; + phy-handle = <&phy7>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; + pinctrl-names = "default"; + bus-frequency = <8000000>; + /* arbitrary range because all GPIOs are in software mode */ + microchip,sgpio-port-ranges = <0 11>; + status = "okay"; + + sgpio_in: gpio@0 { + ngpios = <128>; + }; + + sgpio_out: gpio@1 { + ngpios = <128>; + }; +}; + +&switch { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 3281af90ac6d..3c7e3a7d6f14 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -35,7 +35,7 @@ function = "fc3_b"; }; - can0_b_pins: can0_b_pins { + can0_b_pins: can0-b-pins { /* RX, TX */ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 7d2869648050..3cb02fffe716 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -84,6 +84,68 @@ #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; @@ -92,6 +154,47 @@ #size-cells = <1>; ranges = <0x0 0xe0040000 0x800>; status = "disabled"; + + usart0: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx1: flexcom@e0044000 { @@ -102,6 +205,47 @@ #size-cells = <1>; ranges = <0x0 0xe0044000 0x800>; status = "disabled"; + + usart1: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; trng: rng@e0048000 { @@ -114,9 +258,9 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xe004c000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>, - <&dma0 AT91_XDMAC_DT_PERID(12)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "aes_clk"; }; @@ -129,6 +273,47 @@ #size-cells = <1>; ranges = <0x0 0xe0060000 0x800>; status = "disabled"; + + usart2: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx3: flexcom@e0064000 { @@ -144,11 +329,42 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "usart"; atmel,fifo-size = <32>; status = "disabled"; }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; dma0: dma-controller@e0068000 { @@ -178,6 +394,47 @@ #size-cells = <1>; ranges = <0x0 0xe0070000 0x800>; status = "disabled"; + + usart4: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; timer0: timer@e008c000 { @@ -196,6 +453,11 @@ status = "disabled"; }; + cpu_ctrl: syscon@e00c0000 { + compatible = "microchip,lan966x-cpu-syscon", "syscon"; + reg = <0xe00c0000 0x350>; + }; + can0: can@e081c000 { compatible = "bosch,m_can"; reg = <0xe081c000 0xfc>, <0x00100000 0x4000>; @@ -211,10 +473,20 @@ status = "disabled"; }; + reset: reset-controller@e200400c { + compatible = "microchip,lan966x-switch-reset"; + reg = <0xe200400c 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; + gpio: pinctrl@e2004064 { compatible = "microchip,lan966x-pinctrl"; reg = <0xe2004064 0xb4>, <0xe2010024 0x138>; + resets = <&reset 0>; + reset-names = "switch"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&gpio 0 0 78>; @@ -223,6 +495,81 @@ #interrupt-cells = <2>; }; + mdio0: mdio@e2004118 { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2004118 0x24>; + clocks = <&sys_clk>; + status = "disabled"; + }; + + mdio1: mdio@e200413c { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe200413c 0x24>, + <0xe2010020 0x4>; + clocks = <&sys_clk>; + status = "disabled"; + + phy0: ethernet-phy@1 { + reg = <1>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + sgpio: gpio@e2004190 { + compatible = "microchip,sparx5-sgpio"; + reg = <0xe2004190 0x118>; + clocks = <&sys_clk>; + resets = <&reset 0>; + reset-names = "switch"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgpio_in: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + sgpio_out: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + }; + }; + + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + }; + + serdes: serdes@e202c000 { + compatible = "microchip,lan966x-serdes"; + reg = <0xe202c000 0x9c>, + <0xe2004010 0x4>; + #phy-cells = <2>; + status = "disabled"; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 55b619c99e24..9ba0ea4eb48a 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -27,6 +27,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb2_phy: hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; @@ -144,6 +146,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; port2-mode = "ehci-phy"; }; @@ -151,10 +155,7 @@ phys = <0 &hsusb2_phy>; }; - &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_pins>; mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < @@ -250,8 +251,7 @@ }; &omap3_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts new file mode 100644 index 000000000000..66bcdaf4b6f9 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021-2022 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + }; + }; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgtl5000: audio-codec@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk>; + }; + + max1239: adc@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ina2201: core-monitor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina2202: current-monitor@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b: thermal-monitor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + s25fl128s: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2e69d6eab4d1..6c88be2a7e8e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -122,8 +122,8 @@ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -192,7 +192,7 @@ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0x7 0x0>; }; }; diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi new file mode 100644 index 000000000000..aac42df9ecf6 --- /dev/null +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = <KEY_1>; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = <KEY_2>; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = <KEY_3>; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 61ec929ab86e..56ea875c418c 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&spi_nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 4776f85d6d5b..ef583cfd3baf 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -564,7 +564,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -577,7 +576,6 @@ clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; }; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi index bcb0846e29fd..3adab5cd1fef 100644 --- a/arch/arm/boot/dts/mt7623n.dtsi +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -121,7 +121,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -144,7 +143,6 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_OVL>; iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; - mediatek,larb = <&larb0>; }; rdma0: rdma@14008000 { @@ -154,7 +152,6 @@ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; - mediatek,larb = <&larb0>; }; wdma@14009000 { @@ -164,7 +161,6 @@ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_WDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; - mediatek,larb = <&larb0>; }; bls: pwm@1400a000 { @@ -215,7 +211,6 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; }; dpi0: dpi@14014000 { diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 41744cc2bc72..01e1bb7c3c6c 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -17,7 +17,7 @@ &fast_timer { /* compatible = "lsi,zevio-timer"; */ - reg = <0x90010000 0x1000>, <0x900A0010 0x8>; + reg = <0x90010000 0x1000>, <0x900a0010 0x8>; }; &uart { @@ -30,12 +30,12 @@ &timer0 { /* compatible = "lsi,zevio-timer"; */ - reg = <0x900C0000 0x1000>, <0x900A0018 0x8>; + reg = <0x900c0000 0x1000>, <0x900a0018 0x8>; }; &timer1 { compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; + reg = <0x900d0000 0x1000>, <0x900a0020 0x8>; }; &keypad { @@ -66,10 +66,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "lsi,zevio-intc"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 0c16b04e2744..590b7dff6ae5 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -92,10 +92,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "arm,pl190-vic"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 90e033d9141f..bb240e6a3a6f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -20,9 +20,9 @@ reg = <0x00000000 0x80000>; }; - sram: sram@A4000000 { + sram: sram@a4000000 { device = "memory"; - reg = <0xA4000000 0x20000>; + reg = <0xa4000000 0x20000>; }; timer_clk: timer_clk { @@ -33,12 +33,12 @@ base_clk: base_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; }; ahb_clk: ahb_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; clocks = <&base_clk>; }; @@ -71,28 +71,28 @@ #size-cells = <1>; ranges; - spi: spi@A9000000 { - reg = <0xA9000000 0x1000>; + spi: spi@a9000000 { + reg = <0xa9000000 0x1000>; }; - usb0: usb@B0000000 { + usb0: usb@b0000000 { compatible = "lsi,zevio-usb"; - reg = <0xB0000000 0x1000>; + reg = <0xb0000000 0x1000>; interrupts = <8>; usb-phy = <&usb_phy>; vbus-supply = <&vbus_reg>; }; - usb1: usb@B4000000 { - reg = <0xB4000000 0x1000>; + usb1: usb@b4000000 { + reg = <0xb4000000 0x1000>; interrupts = <9>; status = "disabled"; }; - lcd: lcd@C0000000 { + lcd: lcd@c0000000 { compatible = "arm,pl111", "arm,primecell"; - reg = <0xC0000000 0x1000>; + reg = <0xc0000000 0x1000>; interrupts = <21>; /* @@ -105,17 +105,17 @@ clock-names = "clcdclk", "apb_pclk"; }; - adc: adc@C4000000 { - reg = <0xC4000000 0x1000>; + adc: adc@c4000000 { + reg = <0xc4000000 0x1000>; interrupts = <11>; }; - tdes: crypto@C8010000 { - reg = <0xC8010000 0x1000>; + tdes: crypto@c8010000 { + reg = <0xc8010000 0x1000>; }; - sha256: crypto@CC000000 { - reg = <0xCC000000 0x1000>; + sha256: crypto@cc000000 { + reg = <0xcc000000 0x1000>; }; apb@90000000 { @@ -143,16 +143,16 @@ interrupts = <1>; }; - timer0: timer@900C0000 { - reg = <0x900C0000 0x1000>; + timer0: timer@900c0000 { + reg = <0x900c0000 0x1000>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; - timer1: timer@900D0000 { - reg = <0x900D0000 0x1000>; + timer1: timer@900d0000 { + reg = <0x900d0000 0x1000>; interrupts = <19>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; @@ -171,18 +171,18 @@ interrupts = <4>; }; - misc: misc@900A0000 { - reg = <0x900A0000 0x1000>; + misc: misc@900a0000 { + reg = <0x900a0000 0x1000>; }; - pwr: pwr@900B0000 { - reg = <0x900B0000 0x1000>; + pwr: pwr@900b0000 { + reg = <0x900b0000 0x1000>; interrupts = <15>; }; - keypad: input@900E0000 { + keypad: input@900e0000 { compatible = "ti,nspire-keypad"; - reg = <0x900E0000 0x1000>; + reg = <0x900e0000 0x1000>; interrupts = <16>; scan-interval = <1000>; @@ -191,8 +191,8 @@ clocks = <&apb_pclk>; }; - contrast: contrast@900F0000 { - reg = <0x900F0000 0x1000>; + contrast: contrast@900f0000 { + reg = <0x900f0000 0x1000>; }; led: led@90110000 { diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts index eb6eb21cb2a4..d10669fcd527 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts @@ -358,7 +358,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -406,7 +406,7 @@ pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -416,7 +416,7 @@ m25p,fast-read; label = "pnor"; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts index d4ff49939a3d..491606c4f044 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts index 82a104b2a65f..a0c2d7652625 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -380,7 +380,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -415,7 +415,7 @@ }; }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +440,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 0334641f8829..3dad32834e5e 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -67,7 +67,7 @@ &fiu0 { status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -128,7 +128,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -324,7 +324,7 @@ &spi0 { cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128", "jedec,spi-nor"; reg = <0x0>; @@ -345,7 +345,7 @@ &spi1 { cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128fw", "jedec,spi-nor"; reg = <0x0>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts index 767e0ac0df7c..132e702281fc 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -100,7 +100,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -139,7 +139,7 @@ }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -166,7 +166,7 @@ pinctrl-0 = <&spi3_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index a858ebfa1500..35eced6521ef 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -370,7 +370,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi index 2ec3628d3315..24adfac26be0 100644 --- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi +++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi @@ -46,37 +46,61 @@ ti,bit-shift = <2>; }; - d2d_26m_fck: d2d_26m_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <3>; - }; - - fshostusb_fck: fshostusb_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <5>; - }; - - ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + d2d_26m_fck: clock-d2d-26m-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "d2d_26m_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + fshostusb_fck: clock-fshostusb-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "fshostusb_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <5>; + }; + + ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; + + usb_l4_div_ick: clock-usb-l4-div-ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "usb_l4_div_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + ti,index-starts-at-one; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es1 { @@ -93,20 +117,43 @@ clock-div = <2>; }; - hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; - }; - - fac_ick: fac_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <8>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es1"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + fac_ick: clock-fac-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "fac_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <8>; + }; + + ssi_ick: clock-ssi-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "ssi_ick_3430es1"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; + + usb_l4_gate_ick: clock-usb-l4-gate-ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clock-output-names = "usb_l4_gate_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -117,45 +164,26 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; - - usb_l4_gate_ick: usb_l4_gate_ick@a10 { - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <5>; - reg = <0x0a10>; - }; - - usb_l4_div_ick: usb_l4_div_ick@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <4>; - ti,max-div = <1>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - usb_l4_ick: usb_l4_ick { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es1"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es1@e10 { diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 21079cdf2663..8374532f20e2 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -13,45 +13,76 @@ clock-div = <1>; }; - aes1_ick: aes1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - ti,bit-shift = <3>; - reg = <0x0a14>; - }; + clock@a14 { + compatible = "ti,clksel"; + reg = <0xa14>; + #clock-cells = <2>; + #address-cells = <0>; - rng_ick: rng_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <2>; - }; + aes1_ick: clock-aes1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <3>; + }; - sha11_ick: sha11_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <1>; - }; + rng_ick: clock-rng-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "rng_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <2>; + }; - des1_ick: des1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <0>; + sha11_ick: clock-sha11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha11_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <1>; + }; + + des1_ick: clock-des1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <0>; + }; + + pka_ick: clock-pka-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "pka_ick"; + clocks = <&security_l3_ick>; + ti,bit-shift = <4>; + }; }; - cam_mclk: cam_mclk@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m5x2_ck>; - ti,bit-shift = <0>; - reg = <0x0f00>; - ti,set-rate-parent; + /* CM_FCLKEN_CAM */ + clock@f00 { + compatible = "ti,clksel"; + reg = <0xf00>; + #clock-cells = <2>; + #address-cells = <0>; + + cam_mclk: clock-cam-mclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "cam_mclk"; + clocks = <&dpll4_m5x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; + + csi2_96m_fck: clock-csi2-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "csi2_96m_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <1>; + }; }; cam_ick: cam_ick@f10 { @@ -62,14 +93,6 @@ ti,bit-shift = <0>; }; - csi2_96m_fck: csi2_96m_fck@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0f00>; - ti,bit-shift = <1>; - }; - security_l3_ick: security_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -78,44 +101,51 @@ clock-div = <1>; }; - pka_ick: pka_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l3_ick>; - reg = <0x0a14>; - ti,bit-shift = <4>; - }; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; - icr_ick: icr_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <29>; - }; + icr_ick: clock-icr-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "icr_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <29>; + }; - des2_ick: des2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <26>; - }; + des2_ick: clock-des2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <26>; + }; - mspro_ick: mspro_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + mspro_ick: clock-mspro-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mspro_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; - mailboxes_ick: mailboxes_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <7>; + mailboxes_ick: clock-mailboxes-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mailboxes_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <7>; + }; + + sad2d_ick: clock-sad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -126,20 +156,27 @@ clock-div = <1>; }; - sr1_fck: sr1_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <6>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - sr2_fck: sr2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <7>; + sr1_fck: clock-sr1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr1_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + sr2_fck: clock-sr2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr2_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; }; sr_l4_ick: sr_l4_ick { @@ -187,37 +224,45 @@ ti,bit-shift = <0>; }; - modem_fck: modem_fck@a00 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <31>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - sad2d_ick: sad2d_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <3>; - }; + modem_fck: clock-modem-fck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "modem_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <31>; + }; - mad2d_ick: mad2d_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a18>; - ti,bit-shift = <3>; + mspro_fck: clock-mspro-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mspro_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <23>; + }; }; - mspro_fck: mspro_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + mad2d_ick: clock-mad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; + }; &cm_clockdomains { diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 9974d5226971..dcc5cfcd1fe6 100644 --- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -133,37 +133,66 @@ ti,bit-shift = <2>; }; - usbtll_ick: usbtll_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a18>; - ti,bit-shift = <2>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + usbtll_ick: clock-usbtll-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usbtll_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <2>; + }; }; - mmchs3_ick: mmchs3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <30>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_ick: clock-mmchs3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <30>; + }; }; - mmchs3_fck: mmchs3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <30>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_fck: clock-mmchs3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <30>; + }; }; - dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 { - #clock-cells = <0>; - compatible = "ti,dss-gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es2"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es2@e10 { diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 4e9cc9003594..c5fdb2bd765d 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -58,12 +58,19 @@ ti,set-bit-to-disable; }; - uart4_fck: uart4_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - ti,bit-shift = <18>; + #clock-cells = <2>; + #address-cells = <0>; + + uart4_fck: clock-uart4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <18>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi index 945537aee3ca..c94eb86d3da7 100644 --- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi @@ -5,21 +5,35 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_clocks { - ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es2 { @@ -36,12 +50,27 @@ clock-div = <2>; }; - hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-hsotgusb-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-hsotgusb-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es2"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + ssi_ick: clock-ssi-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clock-output-names = "ssi_ick_3430es2"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -52,20 +81,19 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-ssi-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - usim_gate_fck: usim_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&omap_96m_fck>; - ti,bit-shift = <9>; - reg = <0x0c00>; + usim_gate_fck: clock-usim-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "usim_gate_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <9>; + }; }; sys_d2_ck: sys_d2_ck { @@ -140,13 +168,20 @@ clock-div = <20>; }; - usim_mux_fck: usim_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; - ti,bit-shift = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_mux_fck: clock-usim-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "usim_mux_fck"; + clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; + ti,bit-shift = <3>; + ti,index-starts-at-one; + }; }; usim_fck: usim_fck { @@ -155,12 +190,19 @@ clocks = <&usim_gate_fck>, <&usim_mux_fck>; }; - usim_ick: usim_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <9>; + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_ick: clock-usim-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usim_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <9>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 0656c32439d2..2e13ca11ceea 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -78,12 +78,35 @@ }; &scm_clocks { - mcbsp5_mux_fck: mcbsp5_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <4>; + /* CONTROL_DEVCONF1 */ + clock@68 { + compatible = "ti,clksel"; reg = <0x68>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp5_mux_fck: clock-mcbsp5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp5_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + }; + + mcbsp3_mux_fck: clock-mcbsp3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp3_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + }; + + mcbsp4_mux_fck: clock-mcbsp4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp4_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; }; mcbsp5_fck: mcbsp5_fck { @@ -92,12 +115,28 @@ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; }; - mcbsp1_mux_fck: mcbsp1_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x04>; + /* CONTROL_DEVCONF0 */ + clock@4 { + compatible = "ti,clksel"; + reg = <0x4>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp1_mux_fck: clock-mcbsp1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp1_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + + mcbsp2_mux_fck: clock-mcbsp2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp2_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + }; }; mcbsp1_fck: mcbsp1_fck { @@ -106,41 +145,18 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <6>; - reg = <0x04>; - }; - mcbsp2_fck: mcbsp2_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; }; - mcbsp3_mux_fck: mcbsp3_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x68>; - }; - mcbsp3_fck: mcbsp3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x68>; - }; - mcbsp4_fck: mcbsp4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -238,14 +254,87 @@ reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>; }; - dpll3_m3_ck: dpll3_m3_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <16>; - ti,max-div = <31>; + /* CM_CLKSEL1_EMU */ + clock@1140 { + compatible = "ti,clksel"; reg = <0x1140>; - ti,index-starts-at-one; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m3_ck: clock-dpll3-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m3_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <16>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + dpll4_m6_ck: clock-dpll4-m6 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m6_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <24>; + ti,max-div = <63>; + ti,index-starts-at-one; + }; + + emu_src_mux_ck: clock-emu-src-mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "emu_src_mux_ck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + }; + + pclk_fck: clock-pclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <8>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; + + pclkx2_fck: clock-pclkx2-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclkx2_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + atclk_fck: clock-atclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "atclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <4>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + traceclk_src_fck: clock-traceclk-src-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "traceclk_src_fck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + ti,bit-shift = <2>; + }; + + traceclk_fck: clock-traceclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "traceclk_fck"; + clocks = <&traceclk_src_fck>; + ti,bit-shift = <11>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; }; dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck { @@ -285,16 +374,6 @@ clock-frequency = <0x0>; }; - dpll3_m2_ck: dpll3_m2_ck@d40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <27>; - ti,max-div = <31>; - reg = <0x0d40>; - ti,index-starts-at-one; - }; - core_ck: core_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -345,22 +424,73 @@ clock-div = <1>; }; - omap_96m_fck: omap_96m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0d40>; - }; - - dpll4_m3_ck: dpll4_m3_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - reg = <0x0e40>; - ti,index-starts-at-one; + /* CM_CLKSEL1_PLL */ + clock@d40 { + compatible = "ti,clksel"; + reg = <0xd40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m2_ck: clock-dpll3-m2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m2_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <27>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + omap_96m_fck: clock-omap-96m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_96m_fck"; + clocks = <&cm_96m_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + omap_54m_fck: clock-omap-54m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_54m_fck"; + clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; + ti,bit-shift = <5>; + }; + + omap_48m_fck: clock-omap-48m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_48m_fck"; + clocks = <&cm_96m_d2_fck>, <&sys_altclk>; + ti,bit-shift = <3>; + }; + }; + + /* CM_CLKSEL_DSS */ + clock@e40 { + compatible = "ti,clksel"; + reg = <0xe40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll4_m3_ck: clock-dpll4-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m3_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-starts-at-one; + }; + + dpll4_m4_ck: clock-dpll4-m4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m4_ck"; + clocks = <&dpll4_ck>; + ti,max-div = <16>; + ti,index-starts-at-one; + }; }; dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck { @@ -380,14 +510,6 @@ ti,set-bit-to-disable; }; - omap_54m_fck: omap_54m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; - ti,bit-shift = <5>; - reg = <0x0d40>; - }; - cm_96m_d2_fck: cm_96m_d2_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -396,14 +518,6 @@ clock-div = <2>; }; - omap_48m_fck: omap_48m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_d2_fck>, <&sys_altclk>; - ti,bit-shift = <3>; - reg = <0x0d40>; - }; - omap_12m_fck: omap_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -412,15 +526,6 @@ clock-div = <4>; }; - dpll4_m4_ck: dpll4_m4_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,max-div = <16>; - reg = <0x0e40>; - ti,index-starts-at-one; - }; - dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; @@ -468,16 +573,6 @@ ti,set-rate-parent; }; - dpll4_m6_ck: dpll4_m6_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <24>; - ti,max-div = <63>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -503,19 +598,37 @@ clock-div = <1>; }; - clkout2_src_gate_ck: clkout2_src_gate_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <7>; - reg = <0x0d70>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; - reg = <0x0d70>; + /* CM_CLKOUT_CTRL */ + clock@d70 { + compatible = "ti,clksel"; + reg = <0xd70>; + #clock-cells = <2>; + #address-cells = <0>; + + clkout2_src_gate_ck: clock-clkout2-src-gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "clkout2_src_gate_ck"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + }; + + clkout2_src_mux_ck: clock-clkout2-src-mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "clkout2_src_mux_ck"; + clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; + }; + + sys_clkout2: clock-sys-clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "sys_clkout2"; + clocks = <&clkout2_src_ck>; + ti,bit-shift = <3>; + ti,max-div = <64>; + ti,index-power-of-two; + }; }; clkout2_src_ck: clkout2_src_ck { @@ -524,16 +637,6 @@ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>; }; - sys_clkout2: sys_clkout2@d70 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_ck>; - ti,bit-shift = <3>; - ti,max-div = <64>; - reg = <0x0d70>; - ti,index-power-of-two; - }; - mpu_ck: mpu_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -558,49 +661,208 @@ clock-div = <1>; }; - l3_ick: l3_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&core_ck>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - l4_ick: l4_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l3_ick>; - ti,bit-shift = <2>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - rm_ick: rm_ick@c40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <1>; - ti,max-div = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; - }; - - gpt10_gate_fck: gpt10_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <11>; - reg = <0x0a00>; - }; - - gpt10_mux_fck: gpt10_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0a40>; + /* CM_CLKSEL_CORE */ + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + l3_ick: clock-l3-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l3_ick"; + clocks = <&core_ck>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + l4_ick: clock-l4-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l4_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <2>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt10_mux_fck: clock-gpt10-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt10_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt11_mux_fck: clock-gpt11-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt11_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; + }; + + /* CM_CLKSEL_WKUP */ + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + rm_ick: clock-rm-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "rm_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <1>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt1_mux_fck: clock-gpt1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt1_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + }; + + /* CM_FCLKEN1_CORE */ + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt10_gate_fck: clock-gpt10-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt10_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <11>; + }; + + gpt11_gate_fck: clock-gpt11-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt11_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <12>; + }; + + mmchs2_fck: clock-mmchs2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <25>; + }; + + mmchs1_fck: clock-mmchs1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <24>; + }; + + i2c3_fck: clock-i2c3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <17>; + }; + + i2c2_fck: clock-i2c2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <16>; + }; + + i2c1_fck: clock-i2c1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <15>; + }; + + mcbsp5_gate_fck: clock-mcbsp5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp5_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <10>; + }; + + mcbsp1_gate_fck: clock-mcbsp1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp1_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <9>; + }; + + mcspi4_fck: clock-mcspi4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi4_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <21>; + }; + + mcspi3_fck: clock-mcspi3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi3_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <20>; + }; + + mcspi2_fck: clock-mcspi2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <19>; + }; + + mcspi1_fck: clock-mcspi1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <18>; + }; + + uart2_fck: clock-uart2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <14>; + }; + + uart1_fck: clock-uart1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <13>; + }; + + hdq_fck: clock-hdq-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "hdq_fck"; + clocks = <&core_12m_fck>; + ti,bit-shift = <22>; + }; }; gpt10_fck: gpt10_fck { @@ -609,22 +871,6 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_gate_fck: gpt11_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <12>; - reg = <0x0a00>; - }; - - gpt11_mux_fck: gpt11_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x0a40>; - }; - gpt11_fck: gpt11_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -639,62 +885,6 @@ clock-div = <1>; }; - mmchs2_fck: mmchs2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <25>; - }; - - mmchs1_fck: mmchs1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <24>; - }; - - i2c3_fck: i2c3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <17>; - }; - - i2c2_fck: i2c2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <16>; - }; - - i2c1_fck: i2c1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <15>; - }; - - mcbsp5_gate_fck: mcbsp5_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <10>; - reg = <0x0a00>; - }; - - mcbsp1_gate_fck: mcbsp1_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <9>; - reg = <0x0a00>; - }; - core_48m_fck: core_48m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -703,54 +893,6 @@ clock-div = <1>; }; - mcspi4_fck: mcspi4_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <21>; - }; - - mcspi3_fck: mcspi3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <20>; - }; - - mcspi2_fck: mcspi2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <19>; - }; - - mcspi1_fck: mcspi1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <18>; - }; - - uart2_fck: uart2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <14>; - }; - - uart1_fck: uart1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <13>; - }; - core_12m_fck: core_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -759,14 +901,6 @@ clock-div = <1>; }; - hdq_fck: hdq_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_12m_fck>; - reg = <0x0a00>; - ti,bit-shift = <22>; - }; - core_l3_ick: core_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -775,12 +909,172 @@ clock-div = <1>; }; - sdrc_ick: sdrc_ick@a10 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <1>; + /* CM_ICLKEN1_CORE */ + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + sdrc_ick: clock-sdrc-ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sdrc_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <1>; + }; + + mmchs2_ick: clock-mmchs2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <25>; + }; + + mmchs1_ick: clock-mmchs1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <24>; + }; + + hdq_ick: clock-hdq-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "hdq_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <22>; + }; + + mcspi4_ick: clock-mcspi4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi4_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <21>; + }; + + mcspi3_ick: clock-mcspi3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <20>; + }; + + mcspi2_ick: clock-mcspi2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <19>; + }; + + mcspi1_ick: clock-mcspi1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <18>; + }; + + i2c3_ick: clock-i2c3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <17>; + }; + + i2c2_ick: clock-i2c2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <16>; + }; + + i2c1_ick: clock-i2c1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <15>; + }; + + uart2_ick: clock-uart2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <14>; + }; + + uart1_ick: clock-uart1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <13>; + }; + + gpt11_ick: clock-gpt11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt11_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <12>; + }; + + gpt10_ick: clock-gpt10-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt10_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <11>; + }; + + mcbsp5_ick: clock-mcbsp5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp5_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <10>; + }; + + mcbsp1_ick: clock-mcbsp1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <9>; + }; + + omapctrl_ick: clock-omapctrl-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omapctrl_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <6>; + }; + + aes2_ick: clock-aes2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <28>; + }; + + sha12_ick: clock-sha12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha12_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <27>; + }; }; gpmc_fck: gpmc_fck { @@ -799,164 +1093,36 @@ clock-div = <1>; }; - mmchs2_ick: mmchs2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <25>; - }; - - mmchs1_ick: mmchs1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <24>; - }; - - hdq_ick: hdq_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <22>; - }; - - mcspi4_ick: mcspi4_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <21>; - }; - - mcspi3_ick: mcspi3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <20>; - }; - - mcspi2_ick: mcspi2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <19>; - }; - - mcspi1_ick: mcspi1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <18>; - }; - - i2c3_ick: i2c3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <17>; - }; - - i2c2_ick: i2c2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <16>; - }; - - i2c1_ick: i2c1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <15>; - }; - - uart2_ick: uart2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <14>; - }; - - uart1_ick: uart1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <13>; - }; - - gpt11_ick: gpt11_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <12>; - }; - - gpt10_ick: gpt10_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <11>; - }; - - mcbsp5_ick: mcbsp5_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <10>; - }; - - mcbsp1_ick: mcbsp1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <9>; - }; - - omapctrl_ick: omapctrl_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <6>; - }; - - dss_tv_fck: dss_tv_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_54m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss_96m_fck: dss_96m_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_96m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss2_alwon_fck: dss2_alwon_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_ck>; - reg = <0x0e00>; - ti,bit-shift = <1>; + /* CM_FCLKEN_DSS */ + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss_tv_fck: clock-dss-tv-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_tv_fck"; + clocks = <&omap_54m_fck>; + ti,bit-shift = <2>; + }; + + dss_96m_fck: clock-dss-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_96m_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <2>; + }; + + dss2_alwon_fck: clock-dss2-alwon-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss2_alwon_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + }; }; dummy_ck: dummy_ck { @@ -965,19 +1131,36 @@ clock-frequency = <0>; }; - gpt1_gate_fck: gpt1_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <0>; - reg = <0x0c00>; - }; - - gpt1_mux_fck: gpt1_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - reg = <0x0c40>; + /* CM_FCLKEN_WKUP */ + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt1_gate_fck: clock-gpt1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt1_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + }; + + gpio1_dbck: clock-gpio1-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio1_dbck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <3>; + }; + + wdt2_fck: clock-wdt2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt2_fck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <5>; + }; }; gpt1_fck: gpt1_fck { @@ -986,14 +1169,6 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - aes2_ick: aes2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - ti,bit-shift = <28>; - reg = <0x0a10>; - }; - wkup_32k_fck: wkup_32k_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1002,76 +1177,60 @@ clock-div = <1>; }; - gpio1_dbck: gpio1_dbck@c00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <3>; - }; - - sha12_ick: sha12_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <27>; - }; - - wdt2_fck: wdt2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <5>; - }; - - wdt2_ick: wdt2_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <5>; - }; - - wdt1_ick: wdt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <4>; - }; - - gpio1_ick: gpio1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <3>; - }; - - omap_32ksync_ick: omap_32ksync_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <2>; - }; - - gpt12_ick: gpt12_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <1>; - }; - - gpt1_ick: gpt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <0>; + /* CM_ICLKEN_WKUP */ + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + wdt2_ick: clock-wdt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt2_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <5>; + }; + + wdt1_ick: clock-wdt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <4>; + }; + + gpio1_ick: clock-gpio1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <3>; + }; + + omap_32ksync_ick: clock-omap-32ksync-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omap_32ksync_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <2>; + }; + + gpt12_ick: clock-gpt12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt12_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <1>; + }; + + gpt1_ick: clock-gpt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <0>; + }; }; per_96m_fck: per_96m_fck { @@ -1090,27 +1249,227 @@ clock-div = <1>; }; - uart3_fck: uart3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; - reg = <0x1000>; - ti,bit-shift = <11>; - }; - - gpt2_gate_fck: gpt2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <3>; + /* CM_FCLKEN_PER */ + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - }; - - gpt2_mux_fck: gpt2_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; + #clock-cells = <2>; + #address-cells = <0>; + + uart3_fck: clock-uart3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart3_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <11>; + }; + + gpt2_gate_fck: clock-gpt2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt2_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt3_gate_fck: clock-gpt3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt3_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt4_gate_fck: clock-gpt4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt4_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt5_gate_fck: clock-gpt5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt5_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt6_gate_fck: clock-gpt6-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt6_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; + + gpt7_gate_fck: clock-gpt7-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt7_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <8>; + }; + + gpt8_gate_fck: clock-gpt8-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt8_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <9>; + }; + + gpt9_gate_fck: clock-gpt9-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt9_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <10>; + }; + + gpio6_dbck: clock-gpio6-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio6_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <17>; + }; + + gpio5_dbck: clock-gpio5-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio5_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <16>; + }; + + gpio4_dbck: clock-gpio4-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio4_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <15>; + }; + + gpio3_dbck: clock-gpio3-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio3_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <14>; + }; + + gpio2_dbck: clock-gpio2-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio2_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <13>; + }; + + wdt3_fck: clock-wdt3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt3_fck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <12>; + }; + + mcbsp2_gate_fck: clock-mcbsp2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp2_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <0>; + }; + + mcbsp3_gate_fck: clock-mcbsp3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp3_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <1>; + }; + + mcbsp4_gate_fck: clock-mcbsp4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp4_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + }; + + /* CM_CLKSEL_PER */ + clock@1040 { + compatible = "ti,clksel"; reg = <0x1040>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt2_mux_fck: clock-gpt2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt2_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + + gpt3_mux_fck: clock-gpt3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt3_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <1>; + }; + + gpt4_mux_fck: clock-gpt4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt4_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <2>; + }; + + gpt5_mux_fck: clock-gpt5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt5_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt6_mux_fck: clock-gpt6-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt6_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt7_mux_fck: clock-gpt7-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt7_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt8_mux_fck: clock-gpt8-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt8_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt9_mux_fck: clock-gpt9-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt9_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; }; gpt2_fck: gpt2_fck { @@ -1119,154 +1478,42 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_gate_fck: gpt3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1000>; - }; - - gpt3_mux_fck: gpt3_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <1>; - reg = <0x1040>; - }; - gpt3_fck: gpt3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_gate_fck: gpt4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1000>; - }; - - gpt4_mux_fck: gpt4_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <2>; - reg = <0x1040>; - }; - gpt4_fck: gpt4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_gate_fck: gpt5_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1000>; - }; - - gpt5_mux_fck: gpt5_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <3>; - reg = <0x1040>; - }; - gpt5_fck: gpt5_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_gate_fck: gpt6_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1000>; - }; - - gpt6_mux_fck: gpt6_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1040>; - }; - gpt6_fck: gpt6_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_gate_fck: gpt7_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <8>; - reg = <0x1000>; - }; - - gpt7_mux_fck: gpt7_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1040>; - }; - gpt7_fck: gpt7_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_gate_fck: gpt8_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <9>; - reg = <0x1000>; - }; - - gpt8_mux_fck: gpt8_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1040>; - }; - gpt8_fck: gpt8_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_gate_fck: gpt9_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <10>; - reg = <0x1000>; - }; - - gpt9_mux_fck: gpt9_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1040>; - }; - gpt9_fck: gpt9_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -1281,54 +1528,6 @@ clock-div = <1>; }; - gpio6_dbck: gpio6_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <17>; - }; - - gpio5_dbck: gpio5_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <16>; - }; - - gpio4_dbck: gpio4_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <15>; - }; - - gpio3_dbck: gpio3_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <14>; - }; - - gpio2_dbck: gpio2_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <13>; - }; - - wdt3_fck: wdt3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <12>; - }; - per_l4_ick: per_l4_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1337,187 +1536,164 @@ clock-div = <1>; }; - gpio6_ick: gpio6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <17>; - }; - - gpio5_ick: gpio5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <16>; - }; - - gpio4_ick: gpio4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <15>; - }; - - gpio3_ick: gpio3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <14>; - }; - - gpio2_ick: gpio2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <13>; - }; - - wdt3_ick: wdt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <12>; - }; - - uart3_ick: uart3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <11>; - }; - - uart4_ick: uart4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <18>; - }; - - gpt9_ick: gpt9_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <10>; - }; - - gpt8_ick: gpt8_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <9>; - }; - - gpt7_ick: gpt7_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <8>; - }; - - gpt6_ick: gpt6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <7>; - }; - - gpt5_ick: gpt5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <6>; - }; - - gpt4_ick: gpt4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <5>; - }; - - gpt3_ick: gpt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <4>; - }; - - gpt2_ick: gpt2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <3>; - }; - - mcbsp2_ick: mcbsp2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <0>; - }; - - mcbsp3_ick: mcbsp3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <1>; - }; - - mcbsp4_ick: mcbsp4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; + /* CM_ICLKEN_PER */ + clock@1010 { + compatible = "ti,clksel"; reg = <0x1010>; - ti,bit-shift = <2>; - }; - - mcbsp2_gate_fck: mcbsp2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <0>; - reg = <0x1000>; - }; - - mcbsp3_gate_fck: mcbsp3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <1>; - reg = <0x1000>; - }; - - mcbsp4_gate_fck: mcbsp4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x1000>; - }; - - emu_src_mux_ck: emu_src_mux_ck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - reg = <0x1140>; + #clock-cells = <2>; + #address-cells = <0>; + + gpio6_ick: clock-gpio6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <17>; + }; + + gpio5_ick: clock-gpio5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <16>; + }; + + gpio4_ick: clock-gpio4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <15>; + }; + + gpio3_ick: clock-gpio3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <14>; + }; + + gpio2_ick: clock-gpio2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <13>; + }; + + wdt3_ick: clock-wdt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <12>; + }; + + uart3_ick: clock-uart3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <11>; + }; + + uart4_ick: clock-uart4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <18>; + }; + + gpt9_ick: clock-gpt9-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt9_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <10>; + }; + + gpt8_ick: clock-gpt8-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt8_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <9>; + }; + + gpt7_ick: clock-gpt7-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt7_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <8>; + }; + + gpt6_ick: clock-gpt6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <7>; + }; + + gpt5_ick: clock-gpt5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <6>; + }; + + gpt4_ick: clock-gpt4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <5>; + }; + + gpt3_ick: clock-gpt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <4>; + }; + + gpt2_ick: clock-gpt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <3>; + }; + + mcbsp2_ick: clock-mcbsp2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <0>; + }; + + mcbsp3_ick: clock-mcbsp3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <1>; + }; + + mcbsp4_ick: clock-mcbsp4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <2>; + }; }; emu_src_ck: emu_src_ck { @@ -1526,54 +1702,6 @@ clocks = <&emu_src_mux_ck>; }; - pclk_fck: pclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <8>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - pclkx2_fck: pclkx2_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <6>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - atclk_fck: atclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <4>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - traceclk_src_fck: traceclk_src_fck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - ti,bit-shift = <2>; - reg = <0x1140>; - }; - - traceclk_fck: traceclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&traceclk_src_fck>; - ti,bit-shift = <11>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - secure_32k_fck: secure_32k_fck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 609a8dea946b..518652a599bd 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -558,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi index 39297868ec85..581e088231b5 100644 --- a/arch/arm/boot/dts/omap443x-clocks.dtsi +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi @@ -8,6 +8,7 @@ bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_fclk"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi index 0f41714cffbb..d9362fef6720 100644 --- a/arch/arm/boot/dts/omap446x-clocks.dtsi +++ b/arch/arm/boot/dts/omap446x-clocks.dtsi @@ -8,6 +8,7 @@ div_ts_ck: div_ts_ck@1888 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_ts_ck"; clocks = <&l4_wkup_clk_mux_ck>; ti,bit-shift = <24>; reg = <0x1888>; @@ -17,6 +18,7 @@ bandgap_ts_fclk: bandgap_ts_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_ts_fclk"; clocks = <&div_ts_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 1f1c04d8f472..8df73d285638 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -8,18 +8,21 @@ extalt_clkin_ck: extalt_clkin_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "extalt_clkin_ck"; clock-frequency = <59000000>; }; pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -28,24 +31,28 @@ pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_slimbus_core_clks_ck"; clock-frequency = <12000000>; }; secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -54,84 +61,98 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; tie_low_clock_ck: tie_low_clock_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tie_low_clock_ck"; clock-frequency = <0>; }; utmi_phy_clkout_ck: utmi_phy_clkout_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "utmi_phy_clkout_ck"; clock-frequency = <60000000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; xclk60motg_ck: xclk60motg_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60motg_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -139,6 +160,7 @@ dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; reg = <0x01f0>; }; @@ -146,6 +168,7 @@ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -157,6 +180,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -165,6 +189,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -175,6 +200,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -186,6 +212,7 @@ core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "core_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -194,6 +221,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -201,12 +229,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -218,6 +248,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -229,6 +260,7 @@ ddrphy_ck: ddrphy_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "ddrphy_ck"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <2>; @@ -237,6 +269,7 @@ dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,6 +281,7 @@ div_core_ck: div_core_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_core_ck"; clocks = <&dpll_core_m5x2_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -256,6 +290,7 @@ div_iva_hs_clk: div_iva_hs_clk@1dc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_iva_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x01dc>; @@ -265,6 +300,7 @@ div_mpu_hs_clk: div_mpu_hs_clk@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_mpu_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x019c>; @@ -274,6 +310,7 @@ dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -285,6 +322,7 @@ dll_clk_div_ck: dll_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dll_clk_div_ck"; clocks = <&dpll_core_m4x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -293,6 +331,7 @@ dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -302,6 +341,7 @@ dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_core_m3x2_gate_ck"; clocks = <&dpll_core_x2_ck>; ti,bit-shift = <8>; reg = <0x0134>; @@ -310,6 +350,7 @@ dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_core_m3x2_div_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -319,12 +360,14 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; }; dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m7x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -336,6 +379,7 @@ iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "iva_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -344,6 +388,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -353,12 +398,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m4x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -372,6 +419,7 @@ dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m5x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -385,6 +433,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -392,6 +441,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -403,6 +453,7 @@ per_hs_clk_div_ck: per_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -411,6 +462,7 @@ usb_hs_clk_div_ck: usb_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -419,6 +471,7 @@ l3_div_ck: l3_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_div_ck"; clocks = <&div_core_ck>; ti,bit-shift = <4>; ti,max-div = <2>; @@ -428,6 +481,7 @@ l4_div_ck: l4_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_div_ck"; clocks = <&l3_div_ck>; ti,bit-shift = <8>; ti,max-div = <2>; @@ -437,6 +491,7 @@ lp_clk_div_ck: lp_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "lp_clk_div_ck"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -445,6 +500,7 @@ mpu_periphclk: mpu_periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_ck>; clock-mult = <1>; clock-div = <2>; @@ -453,6 +509,7 @@ ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "ocp_abe_iclk"; clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; ti,bit-shift = <24>; reg = <0x0528>; @@ -462,6 +519,7 @@ per_abe_24m_fclk: per_abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_abe_24m_fclk"; clocks = <&dpll_abe_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -470,6 +528,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -478,6 +537,7 @@ sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -486,6 +546,7 @@ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ti,bit-shift = <24>; reg = <0x0108>; @@ -494,6 +555,7 @@ abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_refclk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -501,6 +563,7 @@ dbgclk_mux_ck: dbgclk_mux_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dbgclk_mux_ck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; @@ -509,6 +572,7 @@ l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "l4_wkup_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; reg = <0x0108>; }; @@ -516,6 +580,7 @@ syc_clk_div_ck: syc_clk_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "syc_clk_div_ck"; clocks = <&sys_clkin_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -524,6 +589,7 @@ usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usim_ck"; clocks = <&dpll_per_m4x2_ck>; ti,bit-shift = <24>; reg = <0x1858>; @@ -533,6 +599,7 @@ usim_fclk: usim_fclk@1858 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usim_fclk"; clocks = <&usim_ck>; ti,bit-shift = <8>; reg = <0x1858>; @@ -541,6 +608,7 @@ trace_clk_div_ck: trace_clk_div_ck { #clock-cells = <0>; compatible = "ti,clkdm-gate-clock"; + clock-output-names = "trace_clk_div_ck"; clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; }; }; @@ -548,6 +616,7 @@ &prm_clockdomains { emu_sys_clkdm: emu_sys_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "emu_sys_clkdm"; clocks = <&trace_clk_div_ck>; }; }; @@ -556,6 +625,7 @@ per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "per_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; ti,bit-shift = <23>; reg = <0x014c>; @@ -564,6 +634,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -571,6 +642,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -580,6 +652,7 @@ dpll_per_x2_ck: dpll_per_x2_ck@150 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; reg = <0x0150>; }; @@ -587,6 +660,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -598,6 +672,7 @@ dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_per_m3x2_gate_ck"; clocks = <&dpll_per_x2_ck>; ti,bit-shift = <8>; reg = <0x0154>; @@ -606,6 +681,7 @@ dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_per_m3x2_div_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -615,12 +691,14 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; }; dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m4x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -632,6 +710,7 @@ dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m5x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -643,6 +722,7 @@ dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m6x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -654,6 +734,7 @@ dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m7x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -665,6 +746,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -672,6 +754,7 @@ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo_ck"; clocks = <&dpll_usb_ck>; ti,clock-div = <1>; ti,autoidle-shift = <8>; @@ -683,6 +766,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -694,6 +778,7 @@ ducati_clk_mux_ck: ducati_clk_mux_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "ducati_clk_mux_ck"; clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; reg = <0x0100>; }; @@ -701,6 +786,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -709,6 +795,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -717,6 +804,7 @@ func_24mc_fclk: func_24mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -725,6 +813,7 @@ func_48m_fclk: func_48m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <4>, <8>; @@ -733,6 +822,7 @@ func_48mc_fclk: func_48mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -741,6 +831,7 @@ func_64m_fclk: func_64m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_64m_fclk"; clocks = <&dpll_per_m4x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -749,6 +840,7 @@ func_96m_fclk: func_96m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -757,6 +849,7 @@ init_60m_fclk: init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -765,6 +858,7 @@ per_abe_nc_fclk: per_abe_nc_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_nc_fclk"; clocks = <&dpll_abe_m2_ck>; reg = <0x0108>; ti,max-div = <2>; @@ -773,6 +867,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -782,6 +877,7 @@ &cm2_clockdomains { l3_init_clkdm: l3_init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3_init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -790,6 +886,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -798,6 +895,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -806,12 +904,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -821,6 +921,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -829,6 +930,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -837,12 +939,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -852,6 +956,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -860,6 +965,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -868,12 +974,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -883,6 +991,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -891,6 +1000,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -899,12 +1009,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -914,6 +1026,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -922,6 +1035,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -930,12 +1044,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -945,6 +1061,7 @@ auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk5_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0324>; @@ -953,6 +1070,7 @@ auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk5_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0324>; @@ -961,12 +1079,14 @@ auxclk5_src_ck: auxclk5_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk5_src_ck"; clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; }; auxclk5_ck: auxclk5_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk5_ck"; clocks = <&auxclk5_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -976,6 +1096,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -984,6 +1105,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -992,6 +1114,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -1000,6 +1123,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -1008,6 +1132,7 @@ auxclkreq4_ck: auxclkreq4_ck@220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq4_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0220>; @@ -1016,6 +1141,7 @@ auxclkreq5_ck: auxclkreq5_ck@224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq5_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0224>; @@ -1025,6 +1151,7 @@ &cm1 { mpuss_cm: mpuss_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpuss_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1032,6 +1159,7 @@ mpuss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpuss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1039,6 +1167,7 @@ tesla_cm: tesla_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "tesla_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1046,6 +1175,7 @@ tesla_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "tesla_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1053,6 +1183,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1060,6 +1191,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; @@ -1070,6 +1202,7 @@ &cm2 { l4_ao_cm: l4_ao_cm@600 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_ao_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1077,6 +1210,7 @@ l4_ao_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_ao_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1084,6 +1218,7 @@ l3_1_cm: l3_1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1091,6 +1226,7 @@ l3_1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1098,6 +1234,7 @@ l3_2_cm: l3_2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1105,6 +1242,7 @@ l3_2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_2_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1112,6 +1250,7 @@ ducati_cm: ducati_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ducati_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1119,6 +1258,7 @@ ducati_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ducati_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1126,6 +1266,7 @@ l3_dma_cm: l3_dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1133,6 +1274,7 @@ l3_dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1140,6 +1282,7 @@ l3_emif_cm: l3_emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1290,7 @@ l3_emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1154,6 +1298,7 @@ d2d_cm: d2d_cm@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "d2d_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1306,7 @@ d2d_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "d2d_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1314,7 @@ l4_cfg_cm: l4_cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1322,7 @@ l4_cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1182,6 +1330,7 @@ l3_instr_cm: l3_instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1189,6 +1338,7 @@ l3_instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_instr_clkctrl"; reg = <0x20 0x24>; #clock-cells = <2>; }; @@ -1196,6 +1346,7 @@ ivahd_cm: ivahd_cm@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "ivahd_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1203,6 +1354,7 @@ ivahd_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ivahd_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1210,6 +1362,7 @@ iss_cm: iss_cm@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "iss_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1217,6 +1370,7 @@ iss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "iss_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1224,6 +1378,7 @@ l3_dss_cm: l3_dss_cm@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1231,6 +1386,7 @@ l3_dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1238,6 +1394,7 @@ l3_gfx_cm: l3_gfx_cm@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_gfx_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1245,6 +1402,7 @@ l3_gfx_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_gfx_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1252,6 +1410,7 @@ l3_init_cm: l3_init_cm@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1259,26 +1418,30 @@ l3_init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_init_clkctrl"; reg = <0x20 0xc4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@1400 { + l4_per_cm: clock@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_per_cm"; reg = <0x1400 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1400 0x200>; l4_per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per_clkctrl"; reg = <0x20 0x144>; #clock-cells = <2>; }; l4_secure_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_secure_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1288,6 +1451,7 @@ &prm { l4_wkup_cm: l4_wkup_cm@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_wkup_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1295,6 +1459,7 @@ l4_wkup_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1302,6 +1467,7 @@ emu_sys_cm: emu_sys_cm@1a00 { compatible = "ti,omap4-cm"; + clock-output-names = "emu_sys_cm"; reg = <0x1a00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1309,6 +1475,7 @@ emu_sys_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emu_sys_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 76e499d89d24..3851120857d7 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,7500"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 51d5fcae5081..453da9f18a99 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -209,7 +209,7 @@ #size-cells = <0>; }; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,9730"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 42f2c447727d..5cf3b0e78c15 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -8,12 +8,14 @@ pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -22,18 +24,21 @@ secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -42,66 +47,77 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -109,12 +125,14 @@ dpll_abe_x2_ck: dpll_abe_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -124,6 +142,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -132,6 +151,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -141,6 +161,7 @@ abe_iclk: abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_iclk"; clocks = <&aess_fclk>; ti,bit-shift = <24>; reg = <0x0528>; @@ -150,6 +171,7 @@ abe_lp_clk_div: abe_lp_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -158,6 +180,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f4>; @@ -167,6 +190,7 @@ dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -175,6 +199,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -182,12 +207,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h21x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0150>; @@ -197,6 +224,7 @@ c2c_fclk: c2c_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_fclk"; clocks = <&dpll_core_h21x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -205,6 +233,7 @@ c2c_iclk: c2c_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_iclk"; clocks = <&c2c_fclk>; clock-mult = <1>; clock-div = <2>; @@ -213,6 +242,7 @@ dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h11x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0138>; @@ -222,6 +252,7 @@ dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x013c>; @@ -231,6 +262,7 @@ dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0140>; @@ -240,6 +272,7 @@ dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0144>; @@ -249,6 +282,7 @@ dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0154>; @@ -258,6 +292,7 @@ dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -267,6 +302,7 @@ dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -276,6 +312,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; reg = <0x0130>; @@ -285,6 +322,7 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -294,6 +332,7 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -302,6 +341,7 @@ dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -310,6 +350,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -319,12 +360,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h11x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01b8>; @@ -336,6 +379,7 @@ dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h12x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01bc>; @@ -347,6 +391,7 @@ mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -355,6 +400,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -362,6 +408,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x0170>; @@ -371,6 +418,7 @@ per_dpll_hs_clk_div: per_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -379,6 +427,7 @@ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -387,6 +436,7 @@ l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x100>; @@ -397,6 +447,7 @@ gpu_l3_iclk: gpu_l3_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gpu_l3_iclk"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <1>; @@ -405,6 +456,7 @@ l4_root_clk_div: l4_root_clk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_root_clk_div"; ti,max-div = <2>; ti,bit-shift = <8>; reg = <0x100>; @@ -415,6 +467,7 @@ slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus1_slimbus_clk"; clocks = <&slimbus_clk>; ti,bit-shift = <11>; reg = <0x0560>; @@ -423,6 +476,7 @@ aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -432,6 +486,7 @@ mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_sync_mux_ck"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ti,bit-shift = <26>; reg = <0x0540>; @@ -440,6 +495,7 @@ mcasp_gfclk: mcasp_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_gfclk"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ti,bit-shift = <24>; reg = <0x0540>; @@ -448,6 +504,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -455,6 +512,7 @@ sys_clkin: sys_clkin@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -463,6 +521,7 @@ abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x0108>; }; @@ -470,6 +529,7 @@ abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -477,6 +537,7 @@ custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <2>; @@ -485,6 +546,7 @@ dss_syc_gfclk_div: dss_syc_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dss_syc_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <1>; @@ -493,6 +555,7 @@ wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin>, <&abe_lp_clk_div>; reg = <0x0108>; }; @@ -500,6 +563,7 @@ l3instr_ts_gclk_div: l3instr_ts_gclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; clock-mult = <1>; clock-div = <1>; @@ -511,6 +575,7 @@ dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; @@ -519,6 +584,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -526,12 +592,14 @@ dpll_per_x2_ck: dpll_per_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -541,6 +609,7 @@ dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -550,6 +619,7 @@ dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0164>; @@ -559,6 +629,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -568,6 +639,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -577,6 +649,7 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -586,6 +659,7 @@ dpll_unipro1_ck: dpll_unipro1_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro1_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; @@ -593,6 +667,7 @@ dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro1_clkdcoldo"; clocks = <&dpll_unipro1_ck>; clock-mult = <1>; clock-div = <1>; @@ -601,6 +676,7 @@ dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro1_m2_ck"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; reg = <0x0210>; @@ -610,6 +686,7 @@ dpll_unipro2_ck: dpll_unipro2_ck@1c0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro2_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>; }; @@ -617,6 +694,7 @@ dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro2_clkdcoldo"; clocks = <&dpll_unipro2_ck>; clock-mult = <1>; clock-div = <1>; @@ -625,6 +703,7 @@ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro2_m2_ck"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; reg = <0x01d0>; @@ -634,6 +713,7 @@ dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; @@ -642,6 +722,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -649,6 +730,7 @@ dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; @@ -657,6 +739,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; reg = <0x0190>; @@ -666,6 +749,7 @@ func_128m_clk: func_128m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -674,6 +758,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -682,6 +767,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -690,6 +776,7 @@ func_48m_fclk: func_48m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -698,6 +785,7 @@ func_96m_fclk: func_96m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -706,6 +794,7 @@ l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -714,6 +803,7 @@ iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "iss_ctrlclk"; clocks = <&func_96m_fclk>; ti,bit-shift = <8>; reg = <0x1320>; @@ -722,6 +812,7 @@ lli_txphy_clk: lli_txphy_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_clk"; clocks = <&dpll_unipro1_clkdcoldo>; ti,bit-shift = <8>; reg = <0x0f20>; @@ -730,6 +821,7 @@ lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_ls_clk"; clocks = <&dpll_unipro1_m2_ck>; ti,bit-shift = <9>; reg = <0x0f20>; @@ -738,6 +830,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -746,6 +839,7 @@ fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "fdif_fclk"; clocks = <&dpll_per_h11x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -755,6 +849,7 @@ gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <24>; reg = <0x1520>; @@ -763,6 +858,7 @@ gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <25>; reg = <0x1520>; @@ -771,6 +867,7 @@ hsi_fclk: hsi_fclk@1638 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "hsi_fclk"; clocks = <&dpll_per_m2x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -781,6 +878,7 @@ &cm_core_clockdomains { l3init_clkdm: l3init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -789,6 +887,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -797,6 +896,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -805,12 +905,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -820,6 +922,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -828,6 +931,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -836,12 +940,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -851,6 +957,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -859,6 +966,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -867,12 +975,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -882,6 +992,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -890,6 +1001,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -898,12 +1010,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -913,6 +1027,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -921,6 +1036,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -929,12 +1045,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -944,6 +1062,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -952,6 +1071,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -960,6 +1080,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -968,6 +1089,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -977,6 +1099,7 @@ &cm_core_aon { mpu_cm: mpu_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -984,6 +1107,7 @@ mpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -991,6 +1115,7 @@ dsp_cm: dsp_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -998,6 +1123,7 @@ dsp_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1005,6 +1131,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1012,6 +1139,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x64>; #clock-cells = <2>; }; @@ -1022,6 +1150,7 @@ &cm_core { l3main1_cm: l3main1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1029,6 +1158,7 @@ l3main1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1036,6 +1166,7 @@ l3main2_cm: l3main2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1043,6 +1174,7 @@ l3main2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1050,6 +1182,7 @@ ipu_cm: ipu_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1057,6 +1190,7 @@ ipu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1064,6 +1198,7 @@ dma_cm: dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1071,6 +1206,7 @@ dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1078,6 +1214,7 @@ emif_cm: emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1085,6 +1222,7 @@ emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1092,6 +1230,7 @@ l4cfg_cm: l4cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1099,6 +1238,7 @@ l4cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1106,6 +1246,7 @@ l3instr_cm: l3instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1113,26 +1254,30 @@ l3instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - l4per_cm: l4per_cm@1000 { + l4per_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1000 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x200>; l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x20 0x15c>; #clock-cells = <2>; }; l4sec_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1140,6 +1285,7 @@ dss_cm: dss_cm@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1293,7 @@ dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1154,6 +1301,7 @@ gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1309,7 @@ gpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1317,7 @@ l3init_cm: l3init_cm@1600 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1325,7 @@ l3init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0xd4>; #clock-cells = <2>; }; @@ -1184,6 +1335,7 @@ &prm { wkupaon_cm: wkupaon_cm@1900 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1191,6 +1343,7 @@ wkupaon_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1201,6 +1354,7 @@ fref_xtal_ck: fref_xtal_ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "fref_xtal_ck"; clocks = <&sys_clkin>; ti,bit-shift = <28>; reg = <0x14>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 90846a7655b4..dde4364892bf 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -287,7 +287,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 000000000000..ace8cea27949 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + input-enable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts index 0cee62c7b8b0..0cee62c7b8b0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index a1c8ae516d21..34c0ba7fa358 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -227,7 +227,7 @@ smd { compatible = "qcom,smd"; - modem@0 { + modem-edge { interrupts = <0 37 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 3>; @@ -236,7 +236,7 @@ status = "disabled"; }; - q6@1 { + q6-edge { interrupts = <0 90 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 15>; @@ -245,7 +245,7 @@ status = "disabled"; }; - dsps@3 { + dsps-edge { interrupts = <0 138 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&sps_sic_non_secure 0x4080 0>; @@ -254,7 +254,7 @@ status = "disabled"; }; - riva@6 { + riva-edge { interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 25>; @@ -1040,7 +1040,7 @@ }; /* Temporary fixed regulator */ - sdcc1bam:dma@12402000{ + sdcc1bam: dma-controller@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1050,7 +1050,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000{ + sdcc3bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; @@ -1060,7 +1060,7 @@ qcom,ee = <0>; }; - sdcc4bam:dma@121c2000{ + sdcc4bam: dma-controller@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; @@ -1548,7 +1548,7 @@ qcom,mmio = <&riva>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 83793b835d40..3051a861ff0c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -16,331 +16,293 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; + +&blsp1_uart2 { + status = "okay"; +}; - soc { - serial@f991e000 { +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <200000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@b { status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; }; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; }; + }; - sdhci@f98a4900 { - cd-gpios = <&msmgpio 62 0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - bus-width = <4>; - status = "okay"; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; }; - usb@f9a55000 { - status = "okay"; - phys = <&usb_hs2_phy>; - phy-select = <&tcsr 0xb000 1>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - hnp-disable; - srp-disable; - adp-disable; - ulpi { - phy@b { - status = "okay"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; - }; - - - pinctrl@fd510000 { - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - }; - }; - - spi8_default: spi8_default { - mosi { - pins = "gpio45"; - function = "blsp_spi8"; - }; - miso { - pins = "gpio46"; - function = "blsp_spi8"; - }; - cs { - pins = "gpio47"; - function = "blsp_spi8"; - }; - clk { - pins = "gpio48"; - function = "blsp_spi8"; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c11_pins>; - pinctrl-names = "default"; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - eeprom: eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - read-only; - }; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 62 0x1>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vin_5vs-supply = <&pm8941_5v>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 52240fc7a1a6..da50a1a0197f 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -470,7 +470,7 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-apq8084"; qcom,smd-channels = "rpm_requests"; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 0c10d9e096db..03bb9e1768c4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -64,7 +64,7 @@ }; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index a7b1201dd614..79b0c6318e52 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -8,7 +8,7 @@ compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 7a337dc08741..faeaa6bf0def 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -79,7 +79,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index 06f9f2cb2fe9..d596dd1180ae 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -52,7 +52,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 94872518b5a2..0107f552f520 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -52,7 +52,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -62,7 +62,7 @@ status = "okay"; }; - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index a9d0566a3190..9d5e934f2272 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -233,7 +233,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -253,8 +253,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -267,8 +267,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,13 +276,13 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,17 +290,17 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; status = "disabled"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x08e04000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -382,8 +382,8 @@ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; }; blsp1_uart2: serial@78b0000 { @@ -394,8 +394,8 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; }; watchdog: watchdog@b017000 { @@ -471,7 +471,7 @@ status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x7984000 0x1a000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index 65330065390a..5c802b99e15f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -36,7 +36,7 @@ cs-gpios = <&qcom_pinmux 20 0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "s25fl256s1"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 8cb04aa8ed2f..808ea1862283 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -298,13 +298,13 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; @@ -736,7 +736,9 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; @@ -1155,7 +1157,7 @@ regulator-always-on; }; - sdcc1bam: dma@12402000 { + sdcc1bam: dma-controller@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1165,7 +1167,7 @@ qcom,ee = <0>; }; - sdcc3bam: dma@12182000 { + sdcc3bam: dma-controller@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 4d4f37cebf21..8f0752ce1c7b 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -330,7 +330,7 @@ }; }; - sdcc1bam: dma@12182000{ + sdcc1bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -340,7 +340,7 @@ qcom,ee = <0>; }; - sdcc2bam: dma@12142000{ + sdcc2bam: dma-controller@12142000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 85e56992d2d0..28eca15b5712 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -182,6 +182,15 @@ status = "disabled"; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@f991f000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991f000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index a258abb23a64..47b97daecef1 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -212,6 +212,7 @@ ranges; syscon-tcsr = <&tcsr>; + status = "disabled"; gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts deleted file mode 100644 index 6d77e0f8ca4d..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ /dev/null @@ -1,409 +0,0 @@ -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - - -/ { - model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_CAMERA>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - wakeup-source; - debounce-interval = <15>; - }; - }; - - vibrator { - compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; - vcc-supply = <&pm8941_l18>; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3350000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - remoteproc@fb21b000 { - status = "okay"; - - vddmx-supply = <&pm8841_s1>; - vddcx-supply = <&pm8841_s2>; - - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; - - smd-edge { - qcom,remote-pid = <4>; - label = "pronto"; - - wcnss { - status = "okay"; - }; - }; - }; - - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - wcnss_pin_a: wcnss-pin-active { - wlan { - pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "wlan"; - - drive-strength = <6>; - bias-pull-down; - }; - - bt { - pins = "gpio35", "gpio43", "gpio44"; - function = "bt"; - - drive-strength = <2>; - bias-pull-down; - }; - - fm { - pins = "gpio41", "gpio42"; - function = "fm"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - bus-width = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - imem@fe805000 { - status = "okay"; - - reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio1", "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 069136170198..9493886a5c0d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -2,7 +2,6 @@ #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -12,213 +11,31 @@ aliases { serial0 = &blsp1_uart1; - serial1 = &blsp2_uart10; + serial1 = &blsp2_uart4; }; chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -229,7 +46,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -237,525 +54,570 @@ }; }; -&soc { - serial@f991d000 { - status = "okay"; +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; }; - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; + maxim,alert-low-soc-level = <2>; + }; +}; - drive-strength = <2>; - bias-disable; - }; - }; +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; - drive-strength = <2>; - bias-disable; - }; - }; + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-disable; - }; + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; - }; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; + }; +}; - mpu6515_pin: mpu6515 { - irq { - pins = "gpio73"; - function = "gpio"; - bias-disable; - input-enable; - }; - }; +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; - touch_pin: touch { - int { - pins = "gpio5"; - function = "gpio"; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; - drive-strength = <2>; - bias-disable; - input-enable; - }; + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; - reset { - pins = "gpio8"; - function = "gpio"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-pull-up; - }; + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; }; + }; +}; - panel_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; - drive-strength = <2>; - bias-disable; - }; - }; + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; - bt_pin: bt { - hostwake { - pins = "gpio42"; - function = "gpio"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; - devwake { - pins = "gpio62"; - function = "gpio"; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; }; - shutdown { - pins = "gpio41"; - function = "gpio"; + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; }; }; + }; +}; - blsp2_uart10_pin_a: blsp2-uart10-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; +&blsp1_uart1 { + status = "okay"; +}; - drive-strength = <2>; - bias-disable; - }; +&blsp2_uart4 { + status = "okay"; - rx { - pins = "gpio54"; - function = "blsp_uart10"; + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; - drive-strength = <2>; - bias-pull-up; - }; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; - cts { - pins = "gpio55"; - function = "blsp_uart10"; +&dsi0 { + status = "okay"; - drive-strength = <2>; - bias-pull-up; - }; + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; - rts { - pins = "gpio56"; - function = "blsp_uart10"; + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; +&dsi0_phy { + status = "okay"; - bus-width = <8>; - non-removable; + vddio-supply = <&pm8941_l12>; +}; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; +&mdss { + status = "okay"; +}; - sdhci@f98a4900 { - status = "okay"; +&otg { + status = "okay"; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; - #address-cells = <1>; - #size-cells = <0>; + hnp-disable; + srp-disable; + adp-disable; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; + ulpi { + phy@a { + status = "okay"; - brcm,drive-strength = <10>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - gpio-keys { - compatible = "gpio-keys"; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; }; - serial@f9960000 { - status = "okay"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart10_pin_a>; + output-high; + power-source = <PM8941_GPIO_S3>; + }; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; - host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; - }; + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; }; +}; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; }; - }; - i2c@f9968000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&msmgpio 67 0>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; }; }; - i2c@f9923000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - omit-battery-class; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - usb_otg_vbus: usb-otg-vbus { }; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - interrupt-parent = <&msmgpio>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - maxim,alert-low-soc-level = <2>; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - }; - i2c@f9924000 { - status = "okay"; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; }; - }; - i2c@f9925000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; }; - }; - usb@f9a55000 { - status = "okay"; + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; - hnp-disable; - srp-disable; - adp-disable; + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - ulpi { - phy@a { - status = "okay"; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; +}; - mdss@fd900000 { - status = "okay"; +&sdhc_1 { + status = "okay"; - mdp@fd900000 { - status = "okay"; - }; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; - dsi@fd922800 { - status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; +&sdhc_2 { + status = "okay"; - #address-cells = <1>; - #size-cells = <0>; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; + brcm,drive-strength = <10>; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; }; - dsi-phy@fd922a00 { - status = "okay"; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; - vddio-supply = <&pm8941_l12>; + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; }; -}; -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3"; - function = "normal"; + mpu6515_pin: mpu6515 { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; - fuelgauge_pin: fuelgauge-int { - pins = "gpio9"; - function = "normal"; + drive-strength = <2>; + bias-disable; + input-enable; + }; - bias-disable; - input-enable; - power-source = <PM8941_GPIO_S3>; - }; + reset { + pins = "gpio8"; + function = "gpio"; - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio16"; - function = "func2"; + drive-strength = <2>; + bias-pull-up; + }; + }; - output-high; - power-source = <PM8941_GPIO_S3>; - }; + panel_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; - wlan_regulator_pin: wl-reg-active { - pins = "gpio17"; - function = "normal"; + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; + devwake { + pins = "gpio62"; + function = "gpio"; + }; - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; + shutdown { + pins = "gpio41"; + function = "gpio"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts deleted file mode 100644 index 96e1c978b878..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ /dev/null @@ -1,908 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "qcom-pma8084.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Samsung Galaxy S5"; - compatible = "samsung,klte", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart1; - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - smd { - rpm { - rpm_requests { - pma8084-regulators { - compatible = "qcom,rpm-pma8084-regulators"; - status = "okay"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; - }; - }; - - i2c-gpio-touchkey { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_touchkey_pins>; - - touchkey@20 { - compatible = "cypress,tm2-touchkey"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchkey_pin>; - - vcc-supply = <&max77826_ldo15>; - vdd-supply = <&pma8084_l19>; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; - }; - - i2c-gpio-led { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_gpioex_pins>; - - i2c-gpio,delay-us = <2>; - - gpio_expander: gpio@20 { - compatible = "nxp,pcal6416"; - reg = <0x20>; - - gpio-controller; - #gpio-cells = <2>; - - vcc-supply = <&pma8084_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpioex_pin>; - - reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; - }; - - led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - }; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_panel: panel-regulator { - compatible = "regulator-fixed"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - - regulator-name = "panel-vddr-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /delete-node/ vreg-boost; - - adsp-pil { - cx-supply = <&pma8084_s2>; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - /* blsp2_uart8 */ - serial@f995e000 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart8_pins_active>; - pinctrl-1 = <&blsp2_uart8_pins_sleep>; - - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&msmgpio>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <15>; - }; - - home-key { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_HOMEPAGE>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <15>; - }; - }; - - pinctrl@fd510000 { - blsp2_uart8_pins_active: blsp2-uart8-pins-active { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; - - blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - bt_pins: bt-pins { - hostwake { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - input-enable; - }; - - devwake { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - }; - - sdhc2_cd_pin: sdhc2-cd { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c_touchkey_pins: i2c-touchkey { - mux { - pins = "gpio95", "gpio96"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - }; - - i2c_led_gpioex_pins: i2c-led-gpioex { - mux { - pins = "gpio120", "gpio121"; - function = "gpio"; - input-enable; - bias-pull-down; - }; - }; - - gpioex_pin: gpioex { - res { - pins = "gpio145"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - wifi_pin: wifi { - int { - pins = "gpio92"; - function = "gpio"; - - input-enable; - bias-pull-down; - }; - }; - - panel_te_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; - - drive-strength = <2>; - bias-disable; - }; - }; - }; - - sdhc_1: sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhc_2: sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; - - bus-width = <4>; - - /* cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; - // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - }; - - sdhci@f98a4900 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - max-frequency = <100000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <4>; - non-removable; - - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - - interrupt-parent = <&msmgpio>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - /*extcon = <&smbb>, <&usb_id>;*/ - /*vbus-supply = <&chg_otg>;*/ - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - /*extcon = <&smbb>;*/ - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - i2c@f9924000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - syna,startup-delay-ms = <100>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9928000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; - }; - }; - - i2c@f9968000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - }; - }; - - adreno@fdb00000 { - status = "ok"; - }; - - mdss@fd900000 { - status = "ok"; - - mdp@fd900000 { - status = "ok"; - }; - - dsi@fd922800 { - status = "ok"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; - - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; - - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi-phy@fd922a00 { - status = "ok"; - - vddio-supply = <&pma8084_l12>; - }; - }; - - remoteproc@fc880000 { - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; - }; -}; - -&spmi_bus { - pma8084@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - }; - - touchkey_pin: touchkey-int-pin { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - touch_pin: touchscreen-int-pin { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - panel_en_pin: panel-en-pin { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - wlan_sleep_clk_pin: wlan-sleep-clk-pin { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; - }; - - panel_rst_pin: panel-rst-pin { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - - fuelgauge_pin: fuelgauge-int-pin { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts deleted file mode 100644 index 79e2cfbbb1ba..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1 Compact"; - compatible = "sony,xperia-amami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1300000>; - qcom,fast-charge-current-limit = <1300000>; - qcom,dc-current-limit = <1300000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts deleted file mode 100644 index e66937e3f7dd..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ /dev/null @@ -1,723 +0,0 @@ -#include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - - vreg_bl_vddio: lcd-backlight-vddio { - compatible = "regulator-fixed"; - regulator-name = "vreg_bl_vddio"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - gpio = <&msmgpio 69 0>; - enable-active-high; - - vin-supply = <&pm8941_s3>; - startup-delay-us = <70000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - serial@f995d000 { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; - - host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; - - drive-strength = <10>; - bias-disable; - }; - - cmd { - pins = "gpio39"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - }; - - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c@f9964000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&msmgpio>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; - - output-low; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; - - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts deleted file mode 100644 index a62e5c25b23c..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ /dev/null @@ -1,484 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1"; - compatible = "sony,xperia-honami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - i2c@f9924000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - ts_int_pin: touch-int { - pin { - pins = "gpio61"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts new file mode 100644 index 000000000000..68d5626bf491 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts new file mode 100644 index 000000000000..ea6a941d8f8c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 000000000000..1d21de46f85c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <59 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8334 MHL HDMI bridge */ +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + ts_int_pin: touch-int { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 412d94736c35..814ad0b46232 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -12,61 +12,19 @@ / { #address-cells = <1>; #size-cells = <1>; - model = "Qualcomm MSM8974"; - compatible = "qcom,msm8974"; interrupt-parent = <&intc>; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; }; - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; @@ -136,238 +94,75 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; - - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + }; - thermal-sensors = <&tsens 1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; }; - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; }; - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; }; - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; }; - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; }; - }; - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <GIC_PPI 7 0xf04>; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 4 0xf08>, - <GIC_PPI 1 0xf08>; - clock-frequency = <19200000>; - }; - - adsp-pil { - compatible = "qcom,msm8974-adsp-pil"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - cx-supply = <&pm8841_s2>; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_region>; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - smd-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; - label = "lpass"; + qcom,client-id = <1>; }; }; @@ -497,11 +292,23 @@ }; }; - firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; }; @@ -524,31 +331,6 @@ reg = <0xf9011000 0x1000>; }; - qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -654,47 +436,59 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <8>; + non-removable; - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; + status = "disabled"; }; - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; - }; + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; + #address-cells = <1>; + #size-cells = <0>; - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; + status = "disabled"; }; - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - #hwlock-cells = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; + status = "disabled"; }; blsp1_uart1: serial@f991d000 { @@ -715,7 +509,73 @@ status = "disabled"; }; - blsp2_uart7: serial@f995d000 { + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; @@ -724,7 +584,7 @@ status = "disabled"; }; - blsp2_uart8: serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -733,7 +593,7 @@ status = "disabled"; }; - blsp2_uart10: serial@f9960000 { + blsp2_uart4: serial@f9960000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf9960000 0x1000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; @@ -742,46 +602,45 @@ status = "disabled"; }; - sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c2: i2c@f9964000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f9864900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c5: i2c@f9967000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c6: i2c@f9968000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; otg: usb@f9a55000 { @@ -835,55 +694,6 @@ clock-names = "core"; }; - remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -898,8 +708,6 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - vddpx-supply = <&pm8941_s3>; - qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -910,11 +718,6 @@ clocks = <&rpmcc RPM_SMD_CXO_A2>; clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; }; smd-edge { @@ -942,139 +745,32 @@ interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; }; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - - i2c@f9923000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9923000 0x1000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@f9924000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9924000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c3: i2c@f9925000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c6: i2c@f9928000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9928000 0x1000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c8: i2c@f9964000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9964000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c11: i2c@f9967000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9967000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - }; - - blsp_i2c12: i2c@f9968000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - etr@fc322000 { + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; + reg = <0xfc307000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + in-ports { port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; + etf_in: endpoint { + remote-endpoint = <&merger_out>; }; }; }; @@ -1096,59 +792,39 @@ }; }; - replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - out-ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; }; }; }; - }; - - etf@fc307000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc307000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&merger_out>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; }; }; }; @@ -1188,85 +864,51 @@ }; }; - funnel@fc31a000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31a000 0x1000>; + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - in-ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* - * Not described input ports: - * 0 - not-connected - * 1 - connected trought funnel to Multimedia CPU - * 2 - connected to Wireless CPU - * 3 - not-connected - * 4 - not-connected - * 6 - not-connected - * 7 - connected to STM - */ - port@5 { - reg = <5>; - funnel1_in5: endpoint { - remote-endpoint = <&kpss_out>; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; }; - out-ports { + in-ports { port { - funnel1_out: endpoint { - remote-endpoint = <&merger_in1>; + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; }; - funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1344,25 +986,66 @@ }; }; - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; }; }; + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + bimc: interconnect@fc380000 { reg = <0xfc380000 0x6a000>; compatible = "qcom,msm8974-bimc"; @@ -1417,94 +1100,378 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; - gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; - compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; - // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; }; - opp-27000000 { - opp-hz = /bits/ 64 <27000000>; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_active: blsp1-uart2-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_active: blsp2-uart1-active { + tx-rts { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_active: blsp2-uart4-active { + tx-rts { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C6 info is missing - nobody uses it though? */ + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; }; }; }; - mdss: mdss@fd900000 { - status = "disabled"; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + }; + mdss: mdss@fd900000 { compatible = "qcom,mdss"; - reg = <0xfd900000 0x100>, - <0xfd924000 0x1000>; - reg-names = "mdss_phys", - "vbif_phys"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; power-domains = <&mmcc MDSS_GDSC>; clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; + #address-cells = <1>; #size-cells = <1>; ranges; mdp: mdp@fd900000 { - status = "disabled"; - compatible = "qcom,mdp5"; reg = <0xfd900100 0x22000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 0>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; + clock-names = "iface", "bus", "core", "vsync"; interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; interconnect-names = "mdp0-mem"; @@ -1523,38 +1490,39 @@ }; dsi0: dsi@fd922800 { - status = "disabled"; - compatible = "qcom,mdss-dsi-ctrl"; reg = <0xfd922800 0x1f8>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_PCLK0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>; + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core", - "core_mmss"; - - phys = <&dsi_phy0>; + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi0_phy>; phy-names = "dsi-phy"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1574,28 +1542,115 @@ }; }; - dsi_phy0: dsi-phy@fd922a00 { - status = "disabled"; - + dsi0_phy: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; reg = <0xfd922a00 0xd4>, <0xfd922b00 0x280>, <0xfd922d80 0x30>; reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + "dsi_phy", + "dsi_phy_regulator"; #clock-cells = <1>; #phy-cells = <0>; - qcom,dsi-phy-index = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + + status = "disabled"; }; }; - imem@fe805000 { + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imem: imem@fe805000 { compatible = "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; @@ -1606,76 +1661,194 @@ }; }; - smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + }; - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; - pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed"; @@ -1692,6 +1865,7 @@ pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts new file mode 100644 index 000000000000..58cb2ce1e4df --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&imem { + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pronto { + status = "okay"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts new file mode 100644 index 000000000000..d6b2300a8223 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ vreg-boost; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; + }; + + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + gpioex_pin: gpioex { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi { + pins = "gpio92"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + panel_te_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts new file mode 100644 index 000000000000..9bd8faea61a5 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&tlmm 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; + +}; + +&rpm_requests { + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on { + clk { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index b64c28036dd0..1e882e16a221 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -1,23 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -/ { - soc { - sdhci@f9824900 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>, - <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, - <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; - }; +&gcc { + compatible = "qcom,gcc-msm8974pro"; +}; - clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974pro"; - }; +&gpu { + compatible = "qcom,adreno-330.2", "qcom,adreno"; +}; - adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - }; - }; +&sdhc_1 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; }; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index b3d0f7b5874d..9b7d9d04ded6 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> &spmi_bus { pm8226_0: pm8226@0 { @@ -40,6 +41,46 @@ chg_otg: otg-vbus { }; }; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + pm8226_mpps: mpps@a000 { compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; reg = <0xa000>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index da00b8f5eecd..cdd2bdb77b32 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -131,7 +131,7 @@ qcom,external-resistor-micro-ohms = <10000>; }; - coincell@2800 { + pm8941_coincell: coincell@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi new file mode 100644 index 000000000000..5411b833d26e --- /dev/null +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@1 { + compatible = "qcom,pmx65", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmx65_temp: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmx65_gpios: pinctrl@8800 { + compatible = "qcom,pmx65-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index d455795da44c..123390721b7f 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -275,13 +275,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sdx55-ipa-virt"; - reg = <0x01e00000 0x100000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -770,7 +763,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 59457da8e5f1..79dc31aa7cd1 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -5,6 +5,10 @@ /dts-v1/; #include "qcom-sdx65.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pmk8350.dtsi> +#include <arm64/qcom/pm8150b.dtsi> +#include "qcom-pmx65.dtsi" / { model = "Qualcomm Technologies, Inc. SDX65 MTP"; @@ -18,8 +22,225 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_dsm: memory@8c400000 { + no-map; + reg = <0x8c400000 0x3200000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0x10000000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx65_bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; }; &blsp1_uart3 { status = "ok"; }; + +&apps_rsc { + pmx65-rpmh-regulators { + compatible = "qcom,pmx65-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-supply = <&vreg_s2b_1p224>; + vdd-l2-l18-supply = <&vreg_s2b_1p224>; + vdd-l3-supply = <&vreg_s8b_0p824>; + vdd-l4-supply = <&vreg_s7b_0p936>; + vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; + vdd-l7-supply = <&vreg_s3b_0p776>; + vdd-l8-l9-supply = <&vreg_s8b_0p824>; + vdd-l10-supply = <&vreg_bob_3p3>; + vdd-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l12-supply = <&vreg_s2b_1p224>; + vdd-l14-supply = <&vreg_s3b_0p776>; + vdd-l15-supply = <&vreg_s2b_1p224>; + vdd-l17-supply = <&vreg_s8b_0p824>; + vdd-l19-supply = <&vreg_s3b_0p776>; + vdd-l20-supply = <&vreg_s7b_0p936>; + vdd-l21-supply = <&vreg_s7b_0p936>; + + vreg_s2b_1p224: smps2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3b_0p776: smps3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s4b_1p824: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s7b_0p936: smps7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s8b_0p824: smps8 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1300000>; + }; + + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo3 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo4 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo7 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo8 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo16 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo17 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo19 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo20 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo21 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 796641d30e06..df6f9d6288fe 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx65.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -60,11 +61,56 @@ #size-cells = <1>; ranges; + tz_heap_mem: memory@8fcad000 { + no-map; + reg = <0x8fcad000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + hyp_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x80000>; + }; + + access_control_mem: memory@8fd80000 { + no-map; + reg = <0x8fd80000 0x80000>; + }; + + aop_mem: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + smem_mem: memory@8fe20000 { + no-map; + reg = <0x8fe20000 0xc0000>; + }; + cmd_db: reserved-memory@8fee0000 { compatible = "qcom,cmd-db"; reg = <0x8fee0000 0x20000>; no-map; }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + + llcc_tcm_mem: memory@15800000 { + no-map; + reg = <0x15800000 0x800000>; + }; }; soc: soc { @@ -91,6 +137,44 @@ status = "disabled"; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + reg-names = "hc_mem"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0xd00>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + cell-index = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sdx65-tlmm"; reg = <0xf100000 0x300000>; @@ -112,6 +196,46 @@ interrupt-controller; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17800000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -121,6 +245,23 @@ <0x17802000 0x1000>; }; + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -202,12 +343,62 @@ <WAKE_TCS 2>, <CONTROL_TCS 1>; - rpmhcc: clock-controller@1 { + rpmhcc: clock-controller { compatible = "qcom,sdx65-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdx65-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 3502b5dcc04f..c0c145a5fe8d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7743-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index f5d4b8b85b6d..3f4fb53dd6df 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7744-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index f877c51f769c..fe8e98a66d93 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -270,6 +270,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7745-wdt", "renesas,rcar-gen2-wdt"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 13ef1e9bf4d5..c90f2a270214 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -91,6 +91,7 @@ compatible = "renesas,r8a77470-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ed6dd4fcc503..a640488d513b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -274,6 +274,7 @@ compatible = "renesas,r8a7790-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 0ccc162d3c2c..542ed0a71872 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -161,6 +161,7 @@ compatible = "renesas,r8a7791-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 9cdb73894ac2..a6d9367f8fa0 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -111,6 +111,7 @@ compatible = "renesas,r8a7792-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index dea4b1e108af..9ebe7bfaf0ed 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -146,6 +146,7 @@ compatible = "renesas,r8a7793-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eac9ed8df0be..b601ee6f7580 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -128,6 +128,7 @@ compatible = "renesas,r8a7794-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 636a6ab31c58..d3665910958b 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -66,6 +66,19 @@ interrupt-parent = <&gic>; ranges; + rtc0: rtc@40006000 { + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + }; + wdt0: watchdog@40008000 { compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; reg = <0x40008000 0x1000>; @@ -87,10 +100,62 @@ reg = <0x4000c000 0x1000>; status = "okay"; #clock-cells = <1>; + #power-domain-cells = <0>; clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #address-cells = <1>; + #size-cells = <1>; + + dmamux: dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-requests = <32>; + dma-masters = <&dma0 &dma1>; + }; + }; + + pci_usb: pci@40030000 { + compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; + device_type = "pci"; + clocks = <&sysctrl R9A06G032_HCLK_USBH>, + <&sysctrl R9A06G032_HCLK_USBPM>, + <&sysctrl R9A06G032_CLK_PCI_USB>; + clock-names = "hclkh", "hclkpm", "pciclk"; + power-domains = <&sysctrl>; + reg = <0x40030000 0xc00>, + <0x40020000 0x1100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; + /* Should map all possible DDR as inbound ranges, but + * the IP only supports a 256MB, 512MB, or 1GB window. + * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) + */ + dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; }; uart0: serial@40060000 { @@ -134,6 +199,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -145,6 +212,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -156,6 +225,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -167,6 +238,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -178,6 +251,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -195,11 +270,40 @@ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; clock-names = "hclk", "eclk"; + power-domains = <&sysctrl>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + dma0: dma-controller@40104000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40104000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA0>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + + dma1: dma-controller@40105000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40105000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA1>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; @@ -214,8 +318,7 @@ }; timer { - compatible = "arm,cortex-a7-timer", - "arm,armv7-timer"; + compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; arm,cpu-registers-not-fw-configured; always-on; @@ -225,4 +328,10 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; + + usbphy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ba2b8891bbb7..242ce42fbd87 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -556,7 +556,7 @@ status = "disabled"; }; - pdma: pdma@20078000 { + pdma: dma-controller@20078000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20078000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -614,7 +614,7 @@ #interrupt-cells = <2>; }; - pcfg_pull_default: pcfg_pull_default { + pcfg_pull_default: pcfg-pull-default { bias-pull-pin-default; }; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index 85d3fce0142f..35b7a5798eee 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/i2c/i2c.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "rk3188.dtsi" / { @@ -485,7 +486,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; - interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PD2 IRQ_TYPE_NONE>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5868eb512f69..6513ffcaac92 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -501,7 +501,7 @@ <75000000>; }; - pdma: pdma@110f0000 { + pdma: dma-controller@110f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x110f0000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 54de3bc77c30..bc0b7354b6c0 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -29,8 +29,7 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x18000000>; + reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index c8f1c324a6c2..daa1067055c8 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -24,9 +24,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; reserved-memory { @@ -564,7 +564,6 @@ reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - spi-cs-high; spi-max-frequency = <1200000>; pinctrl-names = "default"; @@ -636,7 +635,7 @@ }; &i2s0 { - dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; status = "okay"; }; @@ -895,7 +894,7 @@ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gph2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; + interrupt-names = "host-wakeup"; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index c6f39147cb96..d32f42dd1bf5 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -30,9 +30,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 353ba7b09a0c..f1b85aae8842 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -117,7 +117,7 @@ }; }; - pdma0: dma@e0900000 { + pdma0: dma-controller@e0900000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0900000 0x1000>; interrupt-parent = <&vic0>; @@ -125,11 +125,9 @@ clocks = <&clocks CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; - pdma1: dma@e0a00000 { + pdma1: dma-controller@e0a00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0a00000 0x1000>; interrupt-parent = <&vic0>; @@ -137,8 +135,6 @@ clocks = <&clocks CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@e1700000 { @@ -239,8 +235,8 @@ reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -259,8 +255,8 @@ reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -274,8 +270,8 @@ reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; @@ -427,38 +423,28 @@ status = "disabled"; }; - ehci: ehci@ec200000 { + ehci: usb@ec200000 { compatible = "samsung,exynos4210-ehci"; reg = <0xec200000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; - ohci: ohci@ec300000 { + ohci: usb@ec300000 { compatible = "samsung,exynos4210-ohci"; reg = <0xec300000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; mfc: codec@f1700000 { @@ -528,7 +514,7 @@ clock-names = "sclk_fimg2d", "fimg2d"; }; - mdma1: mdma@fa200000 { + mdma1: dma-controller@fa200000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfa200000 0x1000>; interrupt-parent = <&vic0>; @@ -536,8 +522,6 @@ clocks = <&clocks CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; rotator: rotator@fa300000 { diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index f691c8f08d04..b63263129692 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -857,7 +857,6 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - interrupt-parent; reg = <0xe8c11000 0x1000>, <0xe8c12000 0x2000>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7c1d6423d7f8..bfaef45bdd04 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -46,7 +46,7 @@ <0xff113000 0x1000>; }; - intc: intc@fffed000 { + intc: interrupt-controller@fffed000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,8 +80,6 @@ <0 110 4>, <0 111 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 3ba431dfa8c9..26bda2557fe8 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -38,7 +38,7 @@ <0xff113000 0x1000>; }; - intc: intc@ffffd000 { + intc: interrupt-controller@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -73,8 +73,6 @@ <0 90 IRQ_TYPE_LEVEL_HIGH>, <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index dc0bcc7020f1..c28b32640254 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -755,7 +755,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ <&dma 8 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -772,7 +772,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ <&dma 9 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -790,7 +790,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ <&dma 0 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -807,7 +807,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ <&dma 35 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -824,7 +824,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ <&dma 33 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -841,7 +841,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ <&dma 40 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts new file mode 100644 index 000000000000..d6940e0afa86 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO, + * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively + * for T-Mobile in the United States. + * + * This phone is closely related to the Codina, but has: + * - No CPU speed cap, full ~1GHz rate + * - Different power management IC, AB8505 + * - As AB8505 has a micro USB phy, no TI TSU6111 + * - Different power routing such as the removal of the external LDO for the + * touchscreen in favor of using the AB8505 + * - Using a regulator for the key backlight LED + * - Using the Samsung S6D27A1 panel by default + * - The panel is using one of the ordinary AB8505 regulators for 1.8V + * - WiFi/Bluetooth combi chip upgraded to BCM4334 + * - GPIO for backlight control moved from 68 to 69 + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy Exhibit (SGH-T599)"; + compatible = "samsung,codina-tmo", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + battery: battery { + compatible = "samsung,eb425161lu"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + }; + }; + + bat_therm: thermistor { + compatible = "samsung,1404-001221"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls both the 3.0V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "WL_REG_ON"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + vibrator { + compatible = "gpio-vibrator"; + /* GPIO195 "MOT_EN" */ + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + led-touchkeys { + compatible = "regulator-led"; + vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V + default-state = "on"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + }; + + ktd253: backlight { + compatible = "kinetic,ktd253"; + /* GPIO69 is used on Codina R0.4 and Codina TMO */ + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; + pinctrl-names = "default"; + pinctrl-0 = <&ktd253_backlight_default_mode>; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: this should also be used by the SM5103 Camera power management unit */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + clock-frequency = <400000>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + }; + }; + + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220, pin SCL */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MOSI on GPIO224, pin SDI "slave data in" */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* MISO on GPIO225, pin SDO "slave data out" */ + miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO201 */ + cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; + + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&ab8500_ldo_aux6_reg>; + + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */ + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + backlight = <&ktd253>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. + */ + vmmc-supply = <&wl_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + no-sdio; + no-sd; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + /* + * GPIO130 will be set to input no pull-up resulting in a resistor + * pulling the reset high and taking the memory out of reset. + */ + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + /* BCM4334B0 actually */ + compatible = "brcm,bcm4330-bt"; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to AB8505 */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + + /* This is mostly identical to the Codina v0.4 regulators */ + regulator { + ab8500_ldo_aux1 { + regulator-name = "v-sensors-vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + regulator-name = "v-aux2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + regulator-name = "v-mmc-sd"; + }; + + ab8500_ldo_aux4 { + regulator-name = "v-aux4"; + /* + * Providing some span here makes the touchkey + * LEDs actually dimmable. + */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "v-aux5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux6 { + /* 1.8 V to the display */ + regulator-name = "v-aux6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + regulator-name = "v-sensors-vio"; + }; + }; + }; + }; + + /* I2C0 also known as "AGC I2C" */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@39 { + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; + clock-frequency = <400000>; + reg = <0x39>; + + /* IRQ on GPIO146 "PS_INT" */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tmd2672_codina_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + /* Bosch BMA254 accelerometer */ + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: write bindings and driver for this touchscreen */ + + /* Zinitix BT404 ISP part */ + isp@50 { + compatible = "zinitix,bt404-isp"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + + /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */ + touchscreen@20 { + compatible = "zinitix,bt404"; + reg = <0x20>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V + vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V + zinitix,mode = <2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + sdi2 { + /* + * GPIO130 should be set in GPIO mode and + * pulled down. (Not connected.) + */ + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + codina_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + codina_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIOs for panel control */ + panel { + panel_default_mode: panel_default { + codina_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + codina_cfg2 { + /* ESD IRQ line "LCD detect" */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + codina_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO215 named WLAN_RST_N */ + codina_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Backlight GPIO */ + backlight { + ktd253_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + codina_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Zinitix BT404 touchscreen */ + tsp { + tsp_default: tsp_default { + codina_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for light/proximity sensor TMD2672 */ + tmd2672 { + tmd2672_codina_default: tmd2672_codina { + codina_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for subpmu */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + codina_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + codina_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0_d { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + codina_cfg2 { + pins = "GPIO225_AG8"; + /* Needs pull down, no pull down resistor on board */ + ste,config = <&gpio_in_pd>; + }; + }; + spi_gpio_0_sleep: spi_gpio_0_s { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", + "GPIO224_AG9", "GPIO225_AG8"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO216 for WL_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ + codina_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO97 BT_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + /* GPIO209 BT_RST_N */ + codina_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + codina_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 1c1725d31c7c..b6746ac167bc 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -9,9 +9,13 @@ * the boot loader. * * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China). - * The GT-I8160 plain is knonw as the "europe" variant. - * The GT-I8160P appears to not use the ST Microelectronics accelerometer. + * The GT-I8160 plain is known as the "europe" variant. + * The GT-I8160P is the CDMA version and it appears to not use the ST + * Microelectronics accelerometer and reportedly has NFC mounted. * The GT-I8160chn appears to be the same as the europe variant. + * + * There is also the Codina-TMO, Samsung SGH-T599, which has its own device + * tree. */ /dts-v1/; @@ -303,7 +307,22 @@ #address-cells = <1>; #size-cells = <0>; - /* TODO: add the NFC chip here */ + nfc@2b { + /* NXP NFC circuit PN544 C1 marked NXP 44501 */ + compatible = "nxp,pn544-i2c"; + /* IF0, IF1 high, gives I2C address 0x2B */ + reg = <0x2b>; + clock-frequency = <400000>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn544_codina_default>; + }; }; spi-gpio-0 { @@ -461,10 +480,20 @@ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; - /* CTS/RTS is not used, CTS is repurposed as GPIO */ - pinctrl-0 = <&u1rxtx_a_1_default>; - pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + compatible = "brcm,bcm4751"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bcm4751_codina_default>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -483,6 +512,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -515,10 +548,9 @@ pinctrl-0 = <&i2c0_a_1_default>; pinctrl-1 = <&i2c0_a_1_sleep>; - /* TODO: write bindings and driver for this proximity sensor */ proximity@39 { - /* Codina has the Mouser TMD2672 */ - compatible = "mouser,tmd2672"; + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; clock-frequency = <400000>; reg = <0x39>; @@ -847,6 +879,34 @@ }; }; }; + nfc { + pn544_codina_default: pn544_codina { + /* Interrupt line */ + codina_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + codina_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bcm4751 { + bcm4751_codina_default: bcm4751_codina { + /* Reset line, start out asserted */ + codina_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + codina_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; vibrator { vibrator_default: vibrator_default { codina_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index fd170974765f..53062d50e455 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -456,6 +456,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <43000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 290ab59e863d..b0dce91aff4b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -304,6 +304,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { regulator-name = "sensor_3v"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index 42762bfcd878..e6d4fd0eb5f4 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -485,7 +485,26 @@ /* CTS/RTS is not used, CTS is repurposed as GPIO */ pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + + gnss { + /* + * The Low Noise Amplifier (LNA) power and enablement is controlled + * autonomously by the GSD4t. + * Janice has a SiRFstarIV-based GSD4t + * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R. + */ + compatible = "csr,gsd4t"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO96 */ + sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gsd4t_janice_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -504,6 +523,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <15000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -941,4 +964,23 @@ }; }; }; + gsd4t { + gsd4t_janice_default: gsd4t_janice { + /* Reset line, start out asserted */ + janice_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + janice_cfg2 { + pins = "GPIO96_D8"; + ste,config = <&gpio_out_lo>; + }; + /* Unused power enablement line, used in R0.0 and R0.1 boards */ + janice_cfg3 { + pins = "GPIO86_C6"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 2a5bf54137ce..c57676faf181 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -325,6 +325,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index dcb03ce7cbd4..81b341a5ae45 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -281,12 +281,27 @@ }; }; - /* GPF UART */ + /* GPS UART */ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */ + compatible = "csr,csrg05ta03-icje-r"; + /* GPS_RSTN on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&g05ta03_skomer_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to AB8505 USB */ @@ -305,6 +320,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <16000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -649,6 +668,20 @@ }; }; }; + g05ta03 { + g05ta03_skomer_default: g05ta03 { + /* Reset line, start out de-asserted */ + skomer_cfg1 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + skomer_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 155d9ffacc83..500bcc302d42 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -45,7 +45,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 1cf8a23c2644..8f37aefa7315 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -9,7 +9,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 6e42ca2dada2..91dde07a38ba 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -583,7 +583,7 @@ status = "disabled"; }; - pinctrl: pin-controller@58020000 { + pinctrl: pinctrl@58020000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32h743-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 1708c79b5254..f9ebc47e6421 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -75,6 +75,12 @@ compatible = "fixed-clock"; clock-frequency = <99000000>; }; + + clk_rtc_k: clk-rtc-k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; }; intc: interrupt-controller@a0021000 { @@ -218,6 +224,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>, <&clk_rtc_k>; + clock-names = "pclk", "rtc_ck"; + status = "disabled"; + }; + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; @@ -239,11 +254,13 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp135-pinctrl"; ranges = <0 0x50002000 0x8400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index ee100d108ea2..09d6226d598f 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -6,6 +6,9 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -23,6 +26,28 @@ reg = <0xc0000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + user-pa13 { + label = "User-PA13"; + linux,code = <BTN_1>; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -37,6 +62,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index f0d66d8c6e3b..6052243ad81c 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -379,6 +379,40 @@ }; }; + ethernet0_rmii_pins_c: rmii-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_sleep_pins_c: rmii-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -889,6 +923,21 @@ }; }; + mco2_pins_a: mco2-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + mco2_sleep_pins_a: mco2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -2212,4 +2261,19 @@ bias-disable; }; }; + + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index f9aa9af31efd..1b2fd3426a81 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -115,6 +115,33 @@ status = "disabled"; }; + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; + status = "disabled"; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -122,6 +149,20 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + status = "disabled"; + }; + }; + timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; @@ -1623,7 +1664,7 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; @@ -1754,7 +1795,7 @@ }; }; - pinctrl_z: pin-controller-z@54004000 { + pinctrl_z: pinctrl@54004000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts new file mode 100644 index 000000000000..75874eafde11 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1A"; + compatible = "prt,prtt1a", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; + +&pwm5_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + }; +}; + +&pwm5_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ + }; +}; + +&timers5 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts new file mode 100644 index 000000000000..7ecf31263abc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1C"; + compatible = "prt,prtt1c", "st,stm32mp151"; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; + }; +}; + +ðernet0 { + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", + "", "", "", "", "", "", "", "SPI1_nSS"; +}; + +&gpiod { + gpio-line-names = + "", "", "", "", "", "", "", "", + "WFM_RESET", "", "", "", "", "", "", ""; +}; + +&gpioe { + gpio-line-names = + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", + "", "", "", "", "WFM_nIRQ", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "PHY3_nINT", + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", + "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; +}; + +&mdio0 { + /* All this DP83TD510E PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TD510E */ + t1l0_phy: ethernet-phy@6 { + compatible = "ethernet-phy-id2000.0181"; + reg = <6>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l1_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id2000.0181"; + reg = <7>; + interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l2_phy: ethernet-phy@10 { + compatible = "ethernet-phy-id2000.0181"; + reg = <10>; + interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* Micrel KSZ9031 */ + rj45_phy: ethernet-phy@2 { + reg = <2>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc2_b4_od_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + }; +}; + +&sdmmc2_b4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_b4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + non-removable; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmc@1 { + compatible = "prt,prtt1c-wfm200", "silabs,wf200"; + reg = <1>; + }; +}; + +&sdmmc3_b4_od_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + }; +}; + +&sdmmc3_b4_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + }; +}; + +&sdmmc3_b4_sleep_pins_b { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "t1l0"; + phy-mode = "rmii"; + phy-handle = <&t1l0_phy>; + }; + + port@1 { + reg = <1>; + label = "t1l1"; + phy-mode = "rmii"; + phy-handle = <&t1l1_phy>; + }; + + port@2 { + reg = <2>; + label = "t1l2"; + phy-mode = "rmii"; + phy-handle = <&t1l2_phy>; + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi new file mode 100644 index 000000000000..d865ab5d866b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxad-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = ðernet0; + mdio-gpio0 = &mdio0; + serial0 = &uart4; + }; + + led-controller-0 { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + status = "okay"; +}; + +ðernet0_rmii_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +ðernet0_rmii_sleep_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +&iwdg2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&qspi_bk1_pins_a { + pins1 { + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_od_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc1_b4_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart4_idle_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <®_3v3>; +}; + +&usbphyc_port1 { + phy-supply = <®_3v3>; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts new file mode 100644 index 000000000000..ad25929e64e6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1S"; + compatible = "prt,prtt1s", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + }; +}; + +&i2c1_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + }; +}; + +&i2c1_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts new file mode 100644 index 000000000000..e3d3f3f30c7d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; + compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts new file mode 100644 index 000000000000..45dcd299aa9e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-dk2.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; + compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts new file mode 100644 index 000000000000..458e0ca3cded --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; + compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts new file mode 100644 index 000000000000..df9c113edb4b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ev1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", + "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&m_can1 { + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 83e2c87713f8..238a611192e7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -118,13 +118,12 @@ ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rmii"; max-speed = <100>; phy-handle = <&phy0>; - st,eth-ref-clk-sel; mdio0 { #address-cells = <1>; @@ -136,7 +135,7 @@ /* LAN8710Ai */ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - clocks = <&rcc ETHCK_K>; + clocks = <&rcc CK_MCO2>; reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; @@ -446,6 +445,21 @@ }; }; +&rcc { + /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ + clocks = <&rcc CK_MCO2>; + clock-names = "ETH_RX_CLK/ETH_REF_CLK"; + + /* + * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, + * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, + * so that MCO2 behaves as a divider for the ETHRX clock here. + */ + assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <50000000>, <100000000>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 61e17f44ce81..76c54b006d87 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -141,6 +141,7 @@ compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; + reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index fc45d5aaa67f..a9f749f49beb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -75,7 +75,6 @@ r_gpio_keys { compatible = "gpio-keys"; - input-name = "k1"; k1 { label = "k1"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index a1154e6c7cb5..04e59b8381cb 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -11,12 +11,43 @@ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; aliases { + mmc0 = &mmc0; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 6100d3b75f61..0edc1724407b 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -4,6 +4,9 @@ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> */ +#include <dt-bindings/clock/suniv-ccu-f1c100s.h> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h> + / { #address-cells = <1>; #size-cells = <1>; @@ -26,9 +29,13 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -62,6 +69,70 @@ }; }; + spi0: spi@1c05000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <23>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <24>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -82,13 +153,24 @@ compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + }; + + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; @@ -98,14 +180,16 @@ timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; - interrupts = <13>; + interrupts = <13>, <14>, <15>; clocks = <&osc24M>; }; wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun4i-a10-wdt"; + "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <16>; + clocks = <&osc32k>; }; uart0: serial@1c25000 { @@ -114,8 +198,8 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 38>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -125,8 +209,8 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 39>; - resets = <&ccu 25>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -136,8 +220,8 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 26>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 47c2a4b14c06..c193264a86ff 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -343,8 +343,6 @@ <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <4>; clocks = <&clkc 27>; clock-names = "apb_pclk"; }; |