KVM: ARM: World-switch implementation

Provides complete world-switch implementation to switch to other guests
running in non-secure modes. Includes Hyp exception handlers that
capture necessary exception information and stores the information on
the VCPU and KVM structures.

The following Hyp-ABI is also documented in the code:

Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
   Switching to Hyp mode is done through a simple HVC #0 instruction. The
   exception vector code will check that the HVC comes from VMID==0 and if
   so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
   - r0 contains a pointer to a HYP function
   - r1, r2, and r3 contain arguments to the above function.
   - The HYP function will be called with its arguments in r0, r1 and r2.
   On HYP function return, we return directly to SVC.

A call to a function executing in Hyp mode is performed like the following:

        <svc code>
        ldr     r0, =BSYM(my_hyp_fn)
        ldr     r1, =my_param
        hvc #0  ; Call my_hyp_fn(my_param) from HYP mode
        <svc code>

Otherwise, the world-switch is pretty straight-forward. All state that
can be modified by the guest is first backed up on the Hyp stack and the
VCPU values is loaded onto the hardware. State, which is not loaded, but
theoretically modifiable by the guest is protected through the
virtualiation features to generate a trap and cause software emulation.
Upon guest returns, all state is restored from hardware onto the VCPU
struct and the original state is restored from the Hyp-stack onto the
hardware.

SMP support using the VMPIDR calculated on the basis of the host MPIDR
and overriding the low bits with KVM vcpu_id contributed by Marc Zyngier.

Reuse of VMIDs has been implemented by Antonios Motakis and adapated from
a separate patch into the appropriate patches introducing the
functionality. Note that the VMIDs are stored per VM as required by the ARM
architecture reference manual.

To support VFP/NEON we trap those instructions using the HPCTR. When
we trap, we switch the FPU.  After a guest exit, the VFP state is
returned to the host.  When disabling access to floating point
instructions, we also mask FPEXC_EN in order to avoid the guest
receiving Undefined instruction exceptions before we have a chance to
switch back the floating point state.  We are reusing vfp_hard_struct,
so we depend on VFPv3 being enabled in the host kernel, if not, we still
trap cp10 and cp11 in order to inject an undefined instruction exception
whenever the guest tries to use VFP/NEON. VFP/NEON developed by
Antionios Motakis and Rusty Russell.

Aborts that are permission faults, and not stage-1 page table walk, do
not report the faulting address in the HPFAR.  We have to resolve the
IPA, and store it just like the HPFAR register on the VCPU struct. If
the IPA cannot be resolved, it means another CPU is playing with the
page tables, and we simply restart the guest.  This quirk was fixed by
Marc Zyngier.

Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>

1 files changed, 441 insertions, 0 deletions

diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
new file mode 100644
index 000000000000..6a95d341e9c5
--- /dev/null
+++ b/arch/arm/kvm/interrupts_head.S
@@ -0,0 +1,441 @@
+#define VCPU_USR_REG(_reg_nr)	(VCPU_USR_REGS + (_reg_nr * 4))
+#define VCPU_USR_SP		(VCPU_USR_REG(13))
+#define VCPU_USR_LR		(VCPU_USR_REG(14))
+#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4))
+
+/*
+ * Many of these macros need to access the VCPU structure, which is always
+ * held in r0. These macros should never clobber r1, as it is used to hold the
+ * exception code on the return path (except of course the macro that switches
+ * all the registers before the final jump to the VM).
+ */
+vcpu	.req	r0		@ vcpu pointer always in r0
+
+/* Clobbers {r2-r6} */
+.macro store_vfp_state vfp_base
+	@ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
+	VFPFMRX	r2, FPEXC
+	@ Make sure VFP is enabled so we can touch the registers.
+	orr	r6, r2, #FPEXC_EN
+	VFPFMXR	FPEXC, r6
+
+	VFPFMRX	r3, FPSCR
+	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
+	beq	1f
+	@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
+	@ we only need to save them if FPEXC_EX is set.
+	VFPFMRX r4, FPINST
+	tst	r2, #FPEXC_FP2V
+	VFPFMRX r5, FPINST2, ne		@ vmrsne
+	bic	r6, r2, #FPEXC_EX	@ FPEXC_EX disable
+	VFPFMXR	FPEXC, r6
+1:
+	VFPFSTMIA \vfp_base, r6		@ Save VFP registers
+	stm	\vfp_base, {r2-r5}	@ Save FPEXC, FPSCR, FPINST, FPINST2
+.endm
+
+/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
+.macro restore_vfp_state vfp_base
+	VFPFLDMIA \vfp_base, r6		@ Load VFP registers
+	ldm	\vfp_base, {r2-r5}	@ Load FPEXC, FPSCR, FPINST, FPINST2
+
+	VFPFMXR FPSCR, r3
+	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
+	beq	1f
+	VFPFMXR FPINST, r4
+	tst	r2, #FPEXC_FP2V
+	VFPFMXR FPINST2, r5, ne
+1:
+	VFPFMXR FPEXC, r2	@ FPEXC	(last, in case !EN)
+.endm
+
+/* These are simply for the macros to work - value don't have meaning */
+.equ usr, 0
+.equ svc, 1
+.equ abt, 2
+.equ und, 3
+.equ irq, 4
+.equ fiq, 5
+
+.macro push_host_regs_mode mode
+	mrs	r2, SP_\mode
+	mrs	r3, LR_\mode
+	mrs	r4, SPSR_\mode
+	push	{r2, r3, r4}
+.endm
+
+/*
+ * Store all host persistent registers on the stack.
+ * Clobbers all registers, in all modes, except r0 and r1.
+ */
+.macro save_host_regs
+	/* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
+	mrs	r2, ELR_hyp
+	push	{r2}
+
+	/* usr regs */
+	push	{r4-r12}	@ r0-r3 are always clobbered
+	mrs	r2, SP_usr
+	mov	r3, lr
+	push	{r2, r3}
+
+	push_host_regs_mode svc
+	push_host_regs_mode abt
+	push_host_regs_mode und
+	push_host_regs_mode irq
+
+	/* fiq regs */
+	mrs	r2, r8_fiq
+	mrs	r3, r9_fiq
+	mrs	r4, r10_fiq
+	mrs	r5, r11_fiq
+	mrs	r6, r12_fiq
+	mrs	r7, SP_fiq
+	mrs	r8, LR_fiq
+	mrs	r9, SPSR_fiq
+	push	{r2-r9}
+.endm
+
+.macro pop_host_regs_mode mode
+	pop	{r2, r3, r4}
+	msr	SP_\mode, r2
+	msr	LR_\mode, r3
+	msr	SPSR_\mode, r4
+.endm
+
+/*
+ * Restore all host registers from the stack.
+ * Clobbers all registers, in all modes, except r0 and r1.
+ */
+.macro restore_host_regs
+	pop	{r2-r9}
+	msr	r8_fiq, r2
+	msr	r9_fiq, r3
+	msr	r10_fiq, r4
+	msr	r11_fiq, r5
+	msr	r12_fiq, r6
+	msr	SP_fiq, r7
+	msr	LR_fiq, r8
+	msr	SPSR_fiq, r9
+
+	pop_host_regs_mode irq
+	pop_host_regs_mode und
+	pop_host_regs_mode abt
+	pop_host_regs_mode svc
+
+	pop	{r2, r3}
+	msr	SP_usr, r2
+	mov	lr, r3
+	pop	{r4-r12}
+
+	pop	{r2}
+	msr	ELR_hyp, r2
+.endm
+
+/*
+ * Restore SP, LR and SPSR for a given mode. offset is the offset of
+ * this mode's registers from the VCPU base.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r1, r2, r3, r4.
+ */
+.macro restore_guest_regs_mode mode, offset
+	add	r1, vcpu, \offset
+	ldm	r1, {r2, r3, r4}
+	msr	SP_\mode, r2
+	msr	LR_\mode, r3
+	msr	SPSR_\mode, r4
+.endm
+
+/*
+ * Restore all guest registers from the vcpu struct.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers *all* registers.
+ */
+.macro restore_guest_regs
+	restore_guest_regs_mode svc, #VCPU_SVC_REGS
+	restore_guest_regs_mode abt, #VCPU_ABT_REGS
+	restore_guest_regs_mode und, #VCPU_UND_REGS
+	restore_guest_regs_mode irq, #VCPU_IRQ_REGS
+
+	add	r1, vcpu, #VCPU_FIQ_REGS
+	ldm	r1, {r2-r9}
+	msr	r8_fiq, r2
+	msr	r9_fiq, r3
+	msr	r10_fiq, r4
+	msr	r11_fiq, r5
+	msr	r12_fiq, r6
+	msr	SP_fiq, r7
+	msr	LR_fiq, r8
+	msr	SPSR_fiq, r9
+
+	@ Load return state
+	ldr	r2, [vcpu, #VCPU_PC]
+	ldr	r3, [vcpu, #VCPU_CPSR]
+	msr	ELR_hyp, r2
+	msr	SPSR_cxsf, r3
+
+	@ Load user registers
+	ldr	r2, [vcpu, #VCPU_USR_SP]
+	ldr	r3, [vcpu, #VCPU_USR_LR]
+	msr	SP_usr, r2
+	mov	lr, r3
+	add	vcpu, vcpu, #(VCPU_USR_REGS)
+	ldm	vcpu, {r0-r12}
+.endm
+
+/*
+ * Save SP, LR and SPSR for a given mode. offset is the offset of
+ * this mode's registers from the VCPU base.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2, r3, r4, r5.
+ */
+.macro save_guest_regs_mode mode, offset
+	add	r2, vcpu, \offset
+	mrs	r3, SP_\mode
+	mrs	r4, LR_\mode
+	mrs	r5, SPSR_\mode
+	stm	r2, {r3, r4, r5}
+.endm
+
+/*
+ * Save all guest registers to the vcpu struct
+ * Expects guest's r0, r1, r2 on the stack.
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2, r3, r4, r5.
+ */
+.macro save_guest_regs
+	@ Store usr registers
+	add	r2, vcpu, #VCPU_USR_REG(3)
+	stm	r2, {r3-r12}
+	add	r2, vcpu, #VCPU_USR_REG(0)
+	pop	{r3, r4, r5}		@ r0, r1, r2
+	stm	r2, {r3, r4, r5}
+	mrs	r2, SP_usr
+	mov	r3, lr
+	str	r2, [vcpu, #VCPU_USR_SP]
+	str	r3, [vcpu, #VCPU_USR_LR]
+
+	@ Store return state
+	mrs	r2, ELR_hyp
+	mrs	r3, spsr
+	str	r2, [vcpu, #VCPU_PC]
+	str	r3, [vcpu, #VCPU_CPSR]
+
+	@ Store other guest registers
+	save_guest_regs_mode svc, #VCPU_SVC_REGS
+	save_guest_regs_mode abt, #VCPU_ABT_REGS
+	save_guest_regs_mode und, #VCPU_UND_REGS
+	save_guest_regs_mode irq, #VCPU_IRQ_REGS
+.endm
+
+/* Reads cp15 registers from hardware and stores them in memory
+ * @store_to_vcpu: If 0, registers are written in-order to the stack,
+ * 		   otherwise to the VCPU struct pointed to by vcpup
+ *
+ * Assumes vcpu pointer in vcpu reg
+ *
+ * Clobbers r2 - r12
+ */
+.macro read_cp15_state store_to_vcpu
+	mrc	p15, 0, r2, c1, c0, 0	@ SCTLR
+	mrc	p15, 0, r3, c1, c0, 2	@ CPACR
+	mrc	p15, 0, r4, c2, c0, 2	@ TTBCR
+	mrc	p15, 0, r5, c3, c0, 0	@ DACR
+	mrrc	p15, 0, r6, r7, c2	@ TTBR 0
+	mrrc	p15, 1, r8, r9, c2	@ TTBR 1
+	mrc	p15, 0, r10, c10, c2, 0	@ PRRR
+	mrc	p15, 0, r11, c10, c2, 1	@ NMRR
+	mrc	p15, 2, r12, c0, c0, 0	@ CSSELR
+
+	.if \store_to_vcpu == 0
+	push	{r2-r12}		@ Push CP15 registers
+	.else
+	str	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
+	str	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
+	str	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
+	str	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
+	add	r2, vcpu, #CP15_OFFSET(c2_TTBR0)
+	strd	r6, r7, [r2]
+	add	r2, vcpu, #CP15_OFFSET(c2_TTBR1)
+	strd	r8, r9, [r2]
+	str	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
+	str	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
+	str	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
+	.endif
+
+	mrc	p15, 0, r2, c13, c0, 1	@ CID
+	mrc	p15, 0, r3, c13, c0, 2	@ TID_URW
+	mrc	p15, 0, r4, c13, c0, 3	@ TID_URO
+	mrc	p15, 0, r5, c13, c0, 4	@ TID_PRIV
+	mrc	p15, 0, r6, c5, c0, 0	@ DFSR
+	mrc	p15, 0, r7, c5, c0, 1	@ IFSR
+	mrc	p15, 0, r8, c5, c1, 0	@ ADFSR
+	mrc	p15, 0, r9, c5, c1, 1	@ AIFSR
+	mrc	p15, 0, r10, c6, c0, 0	@ DFAR
+	mrc	p15, 0, r11, c6, c0, 2	@ IFAR
+	mrc	p15, 0, r12, c12, c0, 0	@ VBAR
+
+	.if \store_to_vcpu == 0
+	push	{r2-r12}		@ Push CP15 registers
+	.else
+	str	r2, [vcpu, #CP15_OFFSET(c13_CID)]
+	str	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
+	str	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
+	str	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
+	str	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
+	str	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
+	str	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
+	str	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
+	str	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
+	str	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
+	str	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
+	.endif
+.endm
+
+/*
+ * Reads cp15 registers from memory and writes them to hardware
+ * @read_from_vcpu: If 0, registers are read in-order from the stack,
+ *		    otherwise from the VCPU struct pointed to by vcpup
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro write_cp15_state read_from_vcpu
+	.if \read_from_vcpu == 0
+	pop	{r2-r12}
+	.else
+	ldr	r2, [vcpu, #CP15_OFFSET(c13_CID)]
+	ldr	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
+	ldr	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
+	ldr	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
+	ldr	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
+	ldr	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
+	ldr	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
+	ldr	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
+	ldr	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
+	ldr	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
+	ldr	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
+	.endif
+
+	mcr	p15, 0, r2, c13, c0, 1	@ CID
+	mcr	p15, 0, r3, c13, c0, 2	@ TID_URW
+	mcr	p15, 0, r4, c13, c0, 3	@ TID_URO
+	mcr	p15, 0, r5, c13, c0, 4	@ TID_PRIV
+	mcr	p15, 0, r6, c5, c0, 0	@ DFSR
+	mcr	p15, 0, r7, c5, c0, 1	@ IFSR
+	mcr	p15, 0, r8, c5, c1, 0	@ ADFSR
+	mcr	p15, 0, r9, c5, c1, 1	@ AIFSR
+	mcr	p15, 0, r10, c6, c0, 0	@ DFAR
+	mcr	p15, 0, r11, c6, c0, 2	@ IFAR
+	mcr	p15, 0, r12, c12, c0, 0	@ VBAR
+
+	.if \read_from_vcpu == 0
+	pop	{r2-r12}
+	.else
+	ldr	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
+	ldr	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
+	ldr	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
+	ldr	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
+	add	r12, vcpu, #CP15_OFFSET(c2_TTBR0)
+	ldrd	r6, r7, [r12]
+	add	r12, vcpu, #CP15_OFFSET(c2_TTBR1)
+	ldrd	r8, r9, [r12]
+	ldr	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
+	ldr	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
+	ldr	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
+	.endif
+
+	mcr	p15, 0, r2, c1, c0, 0	@ SCTLR
+	mcr	p15, 0, r3, c1, c0, 2	@ CPACR
+	mcr	p15, 0, r4, c2, c0, 2	@ TTBCR
+	mcr	p15, 0, r5, c3, c0, 0	@ DACR
+	mcrr	p15, 0, r6, r7, c2	@ TTBR 0
+	mcrr	p15, 1, r8, r9, c2	@ TTBR 1
+	mcr	p15, 0, r10, c10, c2, 0	@ PRRR
+	mcr	p15, 0, r11, c10, c2, 1	@ NMRR
+	mcr	p15, 2, r12, c0, c0, 0	@ CSSELR
+.endm
+
+/*
+ * Save the VGIC CPU state into memory
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro save_vgic_state
+.endm
+
+/*
+ * Restore the VGIC CPU state from memory
+ *
+ * Assumes vcpu pointer in vcpu reg
+ */
+.macro restore_vgic_state
+.endm
+
+.equ vmentry,	0
+.equ vmexit,	1
+
+/* Configures the HSTR (Hyp System Trap Register) on entry/return
+ * (hardware reset value is 0) */
+.macro set_hstr operation
+	mrc	p15, 4, r2, c1, c1, 3
+	ldr	r3, =HSTR_T(15)
+	.if \operation == vmentry
+	orr	r2, r2, r3		@ Trap CR{15}
+	.else
+	bic	r2, r2, r3		@ Don't trap any CRx accesses
+	.endif
+	mcr	p15, 4, r2, c1, c1, 3
+.endm
+
+/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
+ * (hardware reset value is 0). Keep previous value in r2. */
+.macro set_hcptr operation, mask
+	mrc	p15, 4, r2, c1, c1, 2
+	ldr	r3, =\mask
+	.if \operation == vmentry
+	orr	r3, r2, r3		@ Trap coproc-accesses defined in mask
+	.else
+	bic	r3, r2, r3		@ Don't trap defined coproc-accesses
+	.endif
+	mcr	p15, 4, r3, c1, c1, 2
+.endm
+
+/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
+ * (hardware reset value is 0) */
+.macro set_hdcr operation
+	mrc	p15, 4, r2, c1, c1, 1
+	ldr	r3, =(HDCR_TPM|HDCR_TPMCR)
+	.if \operation == vmentry
+	orr	r2, r2, r3		@ Trap some perfmon accesses
+	.else
+	bic	r2, r2, r3		@ Don't trap any perfmon accesses
+	.endif
+	mcr	p15, 4, r2, c1, c1, 1
+.endm
+
+/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
+.macro configure_hyp_role operation
+	mrc	p15, 4, r2, c1, c1, 0	@ HCR
+	bic	r2, r2, #HCR_VIRT_EXCP_MASK
+	ldr	r3, =HCR_GUEST_MASK
+	.if \operation == vmentry
+	orr	r2, r2, r3
+	ldr	r3, [vcpu, #VCPU_IRQ_LINES]
+	orr	r2, r2, r3
+	.else
+	bic	r2, r2, r3
+	.endif
+	mcr	p15, 4, r2, c1, c1, 0
+.endm
+
+.macro load_vcpu
+	mrc	p15, 4, vcpu, c13, c0, 2	@ HTPIDR
+.endm