Merge branch 'at91' into devel

40 files changed, 1045 insertions, 113 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a048b92cb407..5aafb2e2ca7a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -175,6 +175,15 @@ config MACH_SAM9_L9260
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
 	depends on ARCH_AT91SAM9260
@@ -314,6 +323,19 @@ config AT91_PROGRAMMABLE_CLOCKS
 	  Select this if you need to program one or more of the PCK0..PCK3
 	  programmable clock outputs.
 
+config AT91_SLOW_CLOCK
+	bool "Suspend-to-RAM disables main oscillator"
+	depends on SUSPEND
+	help
+	  Select this if you want Suspend-to-RAM to save the most power
+	  possible (without powering off the CPU) by disabling the PLLs
+	  and main oscillator so that only the 32 KiHz clock is available.
+
+	  When only that slow-clock is available, some peripherals lose
+	  functionality.  Many can't issue wakeup events unless faster
+	  clocks are available.  Some lose their operating state and
+	  need to be completely re-initialized.
+
 config AT91_TIMER_HZ
        int "Kernel HZ (jiffies per second)"
        range 32 1024
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 7d641f97516b..cca612d97ca2 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
+obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -64,6 +65,7 @@ obj-y				+= leds.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 638948c16770..0fc0adaebd58 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -141,8 +141,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -207,7 +207,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&aestdes_clk,
 	&adc_clk,
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index abb4aac8fa98..5ebd4273d353 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -719,6 +719,60 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_PWMC,
+		.end	= AT91CAP9_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_PWMC,
+		.end	= AT91CAP9_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_A_periph(AT91_PIN_PB19, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PA11, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91cap9_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+
+/* --------------------------------------------------------------------
  *  AC97
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 80bfab5680e2..ada4b6769107 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -129,8 +129,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -187,7 +187,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&twodge_clk,
 	&udc_clk,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index c93992f55dc9..8b884083f76d 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -886,6 +886,59 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_PWMC,
+		.end	= AT91SAM9263_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_PWMC,
+		.end	= AT91SAM9263_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB7, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9263_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 556bddf35b45..252e954b49fd 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -131,8 +131,8 @@ static struct clk tc2_clk = {
 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -180,7 +180,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
 	&udphs_clk,
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 620886341fb5..87deb1e1b529 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -527,6 +527,51 @@ static void __init at91_add_device_tc(void) { }
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_TSC,
+		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_TSC,
+		.end	= AT91SAM9RL_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9rl_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
+
+	platform_device_register(&at91sam9rl_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
 
@@ -592,6 +637,59 @@ static void __init at91_add_device_watchdog(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_PWMC,
+		.end	= AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_PWMC,
+		.end	= AT91SAM9RL_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB9, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD5, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD8, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9rl_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
new file mode 100644
index 000000000000..9c040c78889a
--- /dev/null
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -0,0 +1,210 @@
+/*
+ * linux/arch/arm/mach-at91/board-afeb-9260v1.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2008 Sergey Lapin
+ *
+ * A custom board designed as open hardware; PCBs and various information
+ * is available at http://groups.google.com/group/arm9fpga-evolution-board/
+ * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+
+static void __init afeb9260_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init afeb9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata afeb9260_usbh_data = {
+	.ports		= 1,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata afeb9260_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info afeb9260_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata afeb9260_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA9,
+	.is_rmii	= 0,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata afeb9260_nand_partition[] = {
+	{
+		.name	= "bootloader",
+		.offset	= 0,
+		.size	= (640 * SZ_1K),
+	},
+	{
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_2M,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
+	return afeb9260_nand_partition;
+}
+
+static struct atmel_nand_data __initdata afeb9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+	.bus_width_16	= 0,
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+};
+
+
+
+static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("fm3130", 0x68),
+		I2C_BOARD_INFO("24c64", 0x50),
+	},
+};
+
+static void __init afeb9260_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&afeb9260_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&afeb9260_udc_data);
+	/* SPI */
+	at91_add_device_spi(afeb9260_spi_devices,
+			ARRAY_SIZE(afeb9260_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&afeb9260_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&afeb9260_macb_data);
+
+	/* Standard function's pin assignments are not
+	 * appropriate for us and generic code provide
+	 * no API to configure these pins any other way */
+	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
+	/* MMC */
+	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(afeb9260_i2c_devices,
+			ARRAY_SIZE(afeb9260_i2c_devices));
+}
+
+MACHINE_START(AFEB9260, "Custom afeb9260 board")
+	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= afeb9260_map_io,
+	.init_irq	= afeb9260_init_irq,
+	.init_machine	= afeb9260_board_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 196199552eb6..201b89392dcc 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -214,7 +214,7 @@ static struct physmap_flash_data cap9adk_nor_data = {
 };
 
 #define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	0x800000
+#define NOR_SIZE	SZ_8M
 
 static struct resource nor_flash_resources[] = {
 	{
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index afa1ff0e9577..db1f9544d2e0 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,6 +114,30 @@ static struct spi_board_info carmeva_spi_devices[] = {
 	},
 };
 
+static struct gpio_led carmeva_leds[] = {
+	{ /* "user led 1", LED9 */
+		.name			= "led9",
+		.gpio			= AT91_PIN_PA21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{ /* "user led 2", LED10 */
+		.name			= "led10",
+		.gpio			= AT91_PIN_PA25,
+		.active_low		= 1,
+	},
+	{ /* "user led 3", LED11 */
+		.name			= "led11",
+		.gpio			= AT91_PIN_PA26,
+		.active_low		= 1,
+	},
+	{ /* "user led 4", LED12 */
+		.name			= "led12",
+		.gpio			= AT91_PIN_PA18,
+		.active_low		= 1,
+	}
+};
+
 static void __init carmeva_board_init(void)
 {
 	/* Serial */
@@ -132,6 +156,8 @@ static void __init carmeva_board_init(void)
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
 	at91_add_device_mmc(0, &carmeva_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
 
 MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index cb7c9a8fa487..fea2529ebcf9 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,6 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x800000
+#define CSB_FLASH_SIZE	SZ_8M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
@@ -193,11 +193,11 @@ static struct platform_device csb300_button_device = {
 
 static void __init csb300_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PB29, 0);	/* sw0 */
+	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
 	at91_set_deglitch(AT91_PIN_PB29, 1);
-	at91_set_gpio_input(AT91_PIN_PB28, 0);	/* sw1 */
+	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
 	at91_set_deglitch(AT91_PIN_PB28, 1);
-	at91_set_gpio_input(AT91_PIN_PA21, 0);	/* sw2 */
+	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
 	at91_set_deglitch(AT91_PIN_PA21, 1);
 
 	platform_device_register(&csb300_button_device);
@@ -224,7 +224,7 @@ static struct gpio_led csb_leds[] = {
 		.gpio			= AT91_PIN_PB0,
 		.active_low		= 1,
 		.default_trigger	= "ide-disk",
-	},
+	}
 };
 
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 8db8bd8babd9..cfa3f04b2205 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x1000000
+#define CSB_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 43e1aa7ecef7..0fd0f5bc77ea 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -157,7 +157,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 };
 
 #define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	0x200000
+#define DK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data dk_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index bfeee8a2af28..1d69908617f0 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -86,7 +86,7 @@ static struct mtd_partition __initdata my_flash0_partitions[] =
 	{	/* 0x8400 */
 		.name	= "Darrell-loader",
 		.offset	= 0,
-		.size	= 12* 1056,
+		.size	= 12 * 1056,
 	},
 	{
 		.name	= "U-boot",
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 60626e7a3490..4cdfaac8e590 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -116,7 +116,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	0x200000
+#define EK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index dbc912d633c7..859727e7ea30 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -105,7 +105,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 // };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	0x400000
+#define PICOTUX200_FLASH_SIZE	SZ_4M
 
 static struct physmap_flash_data picotux200_flash_data = {
 	.width	= 2,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4c28413426c2..cfb4571a2e27 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -119,18 +119,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 };
 
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index e4910cb26c16..99bb4cc23a09 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -126,11 +126,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Bootloader Area",
 		.offset	= 0,
-		.size	= 10 * 1024 * 1024,
+		.size	= 10 * SZ_1M,
 	},
 	{
 		.name	= "User Area",
-		.offset	= 10 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index cb20e70b3b06..b49eb6e4918a 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -27,8 +27,10 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -163,11 +166,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -222,6 +225,73 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -239,12 +309,14 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
 	at73c213_set_clk(&at73c213_data);
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 1a9963b811c7..4977409d4fc6 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,6 +43,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -168,11 +168,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -435,24 +435,28 @@ static struct gpio_keys_button ek_buttons[] = {
 		.code		= BTN_0,
 		.desc		= "Button 0",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA26,
 		.code		= BTN_1,
 		.desc		= "Button 1",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA25,
 		.code		= BTN_2,
 		.desc		= "Button 2",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA24,
 		.code		= BTN_3,
 		.desc		= "Button 3",
 		.active_low	= 1,
+		.wakeup		= 1,
 	}
 };
 
@@ -472,13 +476,13 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PA27, 0);	/* btn0 */
+	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
 	at91_set_deglitch(AT91_PIN_PA27, 1);
-	at91_set_gpio_input(AT91_PIN_PA26, 0);	/* btn1 */
+	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
 	at91_set_deglitch(AT91_PIN_PA26, 1);
-	at91_set_gpio_input(AT91_PIN_PA25, 0);	/* btn2 */
+	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
 	at91_set_deglitch(AT91_PIN_PA25, 1);
-	at91_set_gpio_input(AT91_PIN_PA24, 0);	/* btn3 */
+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
 	at91_set_deglitch(AT91_PIN_PA24, 1);
 
 	platform_device_register(&ek_button_device);
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b1d11960a735..8354015c6a23 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -26,13 +26,14 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,6 +42,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -172,11 +174,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
+		.size	= SZ_64M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -203,12 +205,30 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 
 
 /*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+/*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static struct fb_videomode at91_tft_vga_modes[] = {
 	{
-	        .name           = "TX09D50VM1CCA @ 60",
+		.name		= "TX09D50VM1CCA @ 60",
 		.refresh	= 60,
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
@@ -224,7 +244,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 
 static struct fb_monspecs at91fb_default_monspecs = {
 	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
+	.monitor	= "TX09D70VM1CCA",
 
 	.modedb		= at91_tft_vga_modes,
 	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
@@ -235,7 +255,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 };
 
 #define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 static void at91_lcdc_power_control(int on)
@@ -277,7 +297,7 @@ static struct gpio_keys_button ek_buttons[] = {
 		.active_low	= 1,
 		.desc		= "right_click",
 		.wakeup		= 1,
-	},
+	}
 };
 
 static struct gpio_keys_platform_data ek_button_data = {
@@ -296,9 +316,9 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
+	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
 	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
+	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
 	at91_set_deglitch(AT91_PIN_PC4, 1);
 
 	platform_device_register(&ek_button_device);
@@ -320,25 +340,32 @@ static struct atmel_ac97_data ek_ac97_data = {
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
-	{	/* "left" led, green, userled1, pwm1 */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "right" led, green, userled2, pwm2 */
+	{	/* "right" led, green, userled2 (could be driven by pwm2) */
 		.name			= "ds2",
 		.gpio			= AT91_PIN_PC29,
 		.active_low		= 1,
 		.default_trigger	= "nand-disk",
 	},
-	{	/* "power" led, yellow, pwm0 */
+	{	/* "power" led, yellow (could be driven by pwm0) */
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
 	}
 };
 
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+	/* For now only DS1 is PWM-driven (by pwm1) */
+	{
+		.name			= "ds1",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
 
 static void __init ek_board_init(void)
 {
@@ -360,7 +387,7 @@ static void __init ek_board_init(void)
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
@@ -369,6 +396,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index d4eba5c0ce02..b588ead14d68 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -122,16 +122,16 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name   = "Bootstrap",
 		.offset = 0,
-		.size   = 4 * 1024 * 1024,
+		.size   = 4 * SZ_1M,
 	},
 	{
 		.name	= "Partition 1",
-		.offset	= 4 * 1024 * 1024,
-		.size	= 60 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c6dce49c388c..270851864308 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -81,11 +81,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -195,6 +195,8 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen Controller */
+	at91_add_device_tsadcc();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index f9d0b65da40b..7c350357333a 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -93,18 +93,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 673e5c27214d..391b566c4571 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -106,18 +106,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Linux Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 36b380aad006..e22bf051f835 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -150,27 +150,27 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
-		.size	= 1 * SZ_256K
+		.size	= SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 2, kernel",
-		.offset	= 1 * SZ_256K,
-		.size	= 2 * SZ_1M - 1 * SZ_256K
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 3, filesystem",
-		.offset	= 2 * SZ_1M,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 14 * SZ_1M
 	},
 	{
 		.name	= "AT91 NAND partition 4, storage",
-		.offset	= 16 * SZ_1M,
-		.size	= 16 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_16M
 	},
 	{
 		.name	= "AT91 NAND partition 5, ext-fs",
-		.offset	= 32 * SZ_1M,
-		.size	= 32 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_32M
 	}
 };
 
@@ -193,24 +193,24 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
  * NOR Flash
  */
 #define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE	0x1000000
+#define YL9200_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition yl9200_flash_partitions[] = {
 	{
 		.name		= "Bootloader",
-		.size		= 0x00040000,
 		.offset		= 0,
+		.size		= SZ_256K,
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	},
 	{
 		.name		= "Kernel",
-		.size		= 0x001C0000,
-		.offset		= 0x00040000,
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name		= "Filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00200000
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
 	}
 };
 
@@ -390,10 +390,6 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-#define AT91_FB_REG_BASE	0x80000000L
-#define AT91_FB_REG_SIZE	0x200
-#define AT91_FB_VMEM_BASE	0x80200000L
-#define AT91_FB_VMEM_SIZE	0x200000L
 
 static void __init yl9200_init_video(void)
 {
@@ -516,29 +512,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 	.initregs		= yl9200_s1dfb_initregs,
 	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
 	.platform_init_video	= yl9200_init_video,
 };
 
+#define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE	SZ_2M
+
 static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
 		.name	= "s1d13xxxfb memory",
-		.start	= AT91_FB_VMEM_BASE,
-		.end	= AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.start	= YL9200_FB_VMEM_BASE,
+		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
 		.name	= "s1d13xxxfb registers",
-		.start	= AT91_FB_REG_BASE,
-		.end	= AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.start	= YL9200_FB_REG_BASE,
+		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
 static struct platform_device yl9200_s1dfb_device = {
 	.name		= "s1d13806fb",
 	.id		= -1,
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
index 0448ac36eadb..974d0bd05b5b 100644
--- a/arch/arm/mach-at91/include/mach/at91_pit.h
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_pit.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index 7cd1b39aaa43..cbd2bf052c1f 100644
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rstc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
index 71782e5d2159..7ec75de8bbb6 100644
--- a/arch/arm/mach-at91/include/mach/at91_rtt.h
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rtt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Real-time Timer (RTT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 60be5ae624f1..c4ce07e8a8fa 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_shdwc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Shutdown Controller (SHDWC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
index 973b4526a98e..fecc2e9f0ca8 100644
--- a/arch/arm/mach-at91/include/mach/at91_wdt.h
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_wdt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index bca878f3bd87..1499b1cbffdd 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
  *
+ *  (C) 2008 Andrew Victor
+ *
  * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
  * Based on AT91CAP9 datasheet revision B.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index f027de5df956..020f02ed921a 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index db62b1f18300..69c6501915d9 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 1921181c63ca..b7260389f7ca 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index ec6ad1338b5a..57de6207e57e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_smc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Static Memory Controllers (SMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index acd60f2a0724..fb51f0e0a83f 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -133,6 +133,16 @@ struct atmel_uart_data {
 extern void __init at91_add_device_serial(void);
 
 /*
+ * PWM
+ */
+#define AT91_PWM0	0
+#define AT91_PWM1	1
+#define AT91_PWM2	2
+#define AT91_PWM3	3
+
+extern void __init at91_add_device_pwm(u32 mask);
+
+/*
  * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
  * platform devices.  Their SSC ID is part of their configuration data,
  * along with information about which SSC signals they should use.
@@ -162,9 +172,13 @@ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
  /* ISI */
 extern void __init at91_add_device_isi(void);
 
+ /* Touchscreen Controller */
+extern void __init at91_add_device_tsadcc(void);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index fec03c59ff94..0415a839e1ad 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
@@ -21,15 +22,13 @@
 
 #if defined(CONFIG_NEW_LEDS)
 
-#include <linux/platform_device.h>
-
 /*
  * New cross-platform LED support.
  */
 
 static struct gpio_led_platform_data led_data;
 
-static struct platform_device at91_leds = {
+static struct platform_device at91_gpio_leds_device = {
 	.name			= "leds-gpio",
 	.id			= -1,
 	.dev.platform_data	= &led_data,
@@ -47,7 +46,7 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr)
 
 	led_data.leds = leds;
 	led_data.num_leds = nr;
-	platform_device_register(&at91_leds);
+	platform_device_register(&at91_gpio_leds_device);
 }
 
 #else
@@ -57,6 +56,44 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
 
 /* ------------------------------------------------------------------------- */
 
+#if defined (CONFIG_LEDS_ATMEL_PWM)
+
+/*
+ * PWM Leds
+ */
+
+static struct gpio_led_platform_data pwm_led_data;
+
+static struct platform_device at91_pwm_leds_device = {
+	.name			= "leds-atmel-pwm",
+	.id			= -1,
+	.dev.platform_data	= &pwm_led_data,
+};
+
+void __init at91_pwm_leds(struct gpio_led *leds, int nr)
+{
+	int i;
+	u32 pwm_mask = 0;
+
+	if (!nr)
+		return;
+
+	for (i = 0; i < nr; i++)
+		pwm_mask |= (1 << leds[i].gpio);
+
+	pwm_led_data.leds = leds;
+	pwm_led_data.num_leds = nr;
+
+	at91_add_device_pwm(pwm_mask);
+	platform_device_register(&at91_pwm_leds_device);
+}
+#else
+void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
 #if defined(CONFIG_LEDS)
 
 #include <asm/leds.h>
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
new file mode 100644
index 000000000000..987fab3d846a
--- /dev/null
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+#else
+#include <mach/at91sam9_sdramc.h>
+#endif
+
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+/*
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
+ * clock during suspend by adjusting its prescalar and divisor.
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
+ *       are errata regarding adjusting the prescalar and divisor.
+ */
+#undef SLOWDOWN_MASTER_CLOCK
+
+#define MCKRDY_TIMEOUT		1000
+#define MOSCRDY_TIMEOUT 	1000
+#define PLLALOCK_TIMEOUT	1000
+#define PLLBLOCK_TIMEOUT	1000
+
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+	mov	r4, #MCKRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MCKRDY
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+	mov	r4, #MOSCRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MOSCS
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+	mov	r4, #PLLALOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKA
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLB has locked.
+ */
+	.macro wait_pllblock
+	mov	r4, #PLLBLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKB
+	beq	1b
+2:
+	.endm
+
+	.text
+
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r0 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R1 = Base address of AT91_PMC
+	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R3 = temporary register
+	 *  R4 = temporary register
+	 */
+	ldr	r1, .at91_va_base_pmc
+	ldr	r2, .at91_va_base_sdramc
+
+	/* Drain write buffer */
+	mcr	p15, 0, r0, c7, c10, 4
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Put SDRAM in self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_SDRAMC_SRR]
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Save Master clock setting */
+	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	r3, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	r3, r3, #AT91_PMC_CSS
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * Set the Master Clock PRES and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	mov	r3, #0
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/* Save PLLA setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	r3, .saved_pllar
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+	/* Save PLLB setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	r3, .saved_pllbr
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Turn off the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	bic	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	/* Wait for interrupt */
+	mcr	p15, 0, r0, c7, c0, 4
+
+	/* Turn on the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	orr	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	wait_moscrdy
+
+	/* Restore PLLB setting */
+	ldr	r3, .saved_pllbr
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Restore PLLA setting */
+	ldr	r3, .saved_pllar
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * First set PRES if it was not 0,
+	 * than set CSS and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	ldr	r3, .saved_mckr
+	tst	r3, #AT91_PMC_PRES
+	beq	2f
+	and	r3, r3, #AT91_PMC_PRES
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	r3, .saved_mckr
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Do nothing - self-refresh is automatically disabled. */
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Restore LPR on AT91CAP9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Restore LPR on AT91SAM9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r0 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_pllbr:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.at91_va_base_pmc:
+	.word AT91_VA_BASE_SYS + AT91_PMC
+
+#ifdef CONFIG_ARCH_AT91RM9200
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS
+#elif defined(CONFIG_ARCH_AT91CAP9)
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+#else
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+#endif
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock