Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board specific changes from Arnd Bergmann:
 "These updates are all for board specific code, including

   - defconfig updates for shmobile, davinci, bcm2835, imx, omap and
     tegra

   - SD/MMC and I2C support on bcm2835 (Raspberry PI)

   - minor updates for PXA

   - shmobile updates to GPIO usage in board files

   - More things in OMAP board files are moved over to device tree
     probing

   - Better support for audio devices on some OMAP platforms"

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: imx_v4_v5_defconfig: Add VPU support
  ARM: imx: configs: enable netfilter support
  ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init
  ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc
  RX-51: Register twl4030-madc device
  RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel
  ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers
  ARM: OMAP1: nokia770: enable CBUS/Retu
  ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator
  ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support
  ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies
  ARM: OMAP2+: craneboard: support the TPS65910 PMU
  ARM: OMAP2+: craneboard: support NAND device
  ARM: OMAP3: cm-t3517: add MMC support
  ARM: OMAP2+: Remove apollon board support
  ARM: shmobile: armadillo800eva: set clock rates before timer init
  ARM: tegra: defconfig updates
  ARM: shmobile: mackerel: Use gpio_request_one()
  ARM: shmobile: kzm9g: Use gpio_request_one()
  ARM: shmobile: bonito: Use gpio_request_one()
  ...

1 files changed, 11 insertions, 19 deletions

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index deb3922612b9..5a2bd44da54d 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -48,8 +48,7 @@ static __init void omapl138_hawk_config_emac(void)
 	val &= ~BIT(8);
 	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
 	if (ret) {
-		pr_warning("%s: cpgmac/mii mux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
@@ -61,8 +60,7 @@ static __init void omapl138_hawk_config_emac(void)
 
 	ret = da8xx_register_emac();
 	if (ret)
-		pr_warning("%s: emac registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
 }
 
 /*
@@ -147,15 +145,14 @@ static __init void omapl138_hawk_mmc_init(void)
 
 	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
 	if (ret) {
-		pr_warning("%s: MMC/SD0 mux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
 	ret = gpio_request_one(DA850_HAWK_MMCSD_CD_PIN,
 			GPIOF_DIR_IN, "MMC CD");
 	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
+		pr_warn("%s: can not open GPIO %d\n",
 			__func__, DA850_HAWK_MMCSD_CD_PIN);
 		return;
 	}
@@ -163,15 +160,14 @@ static __init void omapl138_hawk_mmc_init(void)
 	ret = gpio_request_one(DA850_HAWK_MMCSD_WP_PIN,
 			GPIOF_DIR_IN, "MMC WP");
 	if (ret < 0) {
-		pr_warning("%s: can not open GPIO %d\n",
+		pr_warn("%s: can not open GPIO %d\n",
 			__func__, DA850_HAWK_MMCSD_WP_PIN);
 		goto mmc_setup_wp_fail;
 	}
 
 	ret = da8xx_register_mmcsd0(&da850_mmc_config);
 	if (ret) {
-		pr_warning("%s: MMC/SD0 registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
 		goto mmc_setup_mmcsd_fail;
 	}
 
@@ -250,8 +246,7 @@ static __init void omapl138_hawk_usb_init(void)
 
 	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
 	if (ret) {
-		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
 		return;
 	}
 
@@ -280,8 +275,7 @@ static __init void omapl138_hawk_usb_init(void)
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
 	if (ret) {
-		pr_warning("%s: USB 1.1 registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
 		goto usb11_setup_fail;
 	}
 
@@ -307,8 +301,7 @@ static __init void omapl138_hawk_init(void)
 
 	ret = da850_register_edma(da850_edma_rsv);
 	if (ret)
-		pr_warning("%s: EDMA registration failed: %d\n",
-			__func__, ret);
+		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
 
 	omapl138_hawk_mmc_init();
 
@@ -316,9 +309,8 @@ static __init void omapl138_hawk_init(void)
 
 	ret = da8xx_register_watchdog();
 	if (ret)
-		pr_warning("omapl138_hawk_init: "
-			"watchdog registration failed: %d\n",
-			ret);
+		pr_warn("%s: watchdog registration failed: %d\n",
+			__func__, ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE