ARM: remove ixp23xx and ixp2000 platforms

ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>

1 files changed, 0 insertions, 294 deletions

diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
deleted file mode 100644
index 911f5a58e006..000000000000
--- a/arch/arm/mach-ixp23xx/pci.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/pci.c
- *
- * PCI routines for IXP23XX based systems
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * based on original code:
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Copyright 2002-2005 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-extern int (*external_fault) (unsigned long, struct pt_regs *);
-
-static volatile int pci_master_aborts = 0;
-
-#ifdef DEBUG
-#define DBG(x...)	printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int clear_master_aborts(void);
-
-static u32
-*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	/*
-	 * Must be dword aligned
-	 */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		if (PCI_SLOT(devfn) >= 8)
-			return 0;
-
-		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int where, int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
-		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-			pci_master_aborts = 0;
-			*value = 0xffffffff;
-			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checking on the address for writes.
- * It's assumed that the user checked for the device existing first
- * by doing a read first.
- */
-static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp23xx_pci_ops = {
-	.read	= ixp23xx_pci_read_config,
-	.write	= ixp23xx_pci_write_config,
-};
-
-struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
-	return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
-				 sysdata, &sysdata->resources);
-}
-
-int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	volatile unsigned long temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int clear_master_aborts(void)
-{
-	volatile u32 temp;
-
-	temp = *IXP23XX_PCI_CONTROL;
-
-	/*
-	 * master abort and cmd tgt err
-	 */
-	if (temp & ((1 << 8) | (1 << 5)))
-		*IXP23XX_PCI_CONTROL = temp;
-
-	temp = *IXP23XX_PCI_CMDSTAT;
-
-	if (temp & (1 << 29))
-		*IXP23XX_PCI_CMDSTAT = temp;
-
-	return 0;
-}
-
-static void __init ixp23xx_pci_common_init(void)
-{
-#ifdef __ARMEB__
-	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
-#endif
-	/*
-	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
-	 */
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
-	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
-
-	/*
-	 * Select correct memory for PCI inbound transactions
-	 */
-	if (ixp23xx_cpp_boot()) {
-		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
-	} else {
-		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
-
-		/*
-		 * Enable coherency on A2 silicon.
-		 */
-		if (arch_is_coherent())
-			*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
-	}
-}
-
-void __init ixp23xx_pci_preinit(void)
-{
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0xe0000000;
-
-	pci_set_flags(0);
-
-	ixp23xx_pci_common_init();
-
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
-			"PCI config cycle to non-existent device");
-
-	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
-}
-
-/*
- * Prevent PCI layer from seeing the inbound host-bridge resources
- */
-static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
-{
-	int i;
-
-	dev->class &= 0xff;
-	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		dev->resource[i].start = 0;
-		dev->resource[i].end   = 0;
-		dev->resource[i].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
-
-/*
- * IXP2300 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp23xx_pci_mem_space = {
-	.start	= IXP23XX_PCI_MEM_START,
-	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp23xx_pci_io_space = {
-	.start	= 0x00000100,
-	.end	= 0x01ffffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp23xx_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-
-void __init ixp23xx_pci_slave_init(void)
-{
-	ixp23xx_pci_common_init();
-}