Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...

13 files changed, 29 insertions, 49 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f09683687963..7ee4652b4c61 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -297,7 +297,6 @@ config MACH_MAGICIAN
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select GPIO_SYSFS
 	select IWMMXT
 	select PXA27x
 	help
@@ -529,7 +528,7 @@ config MACH_TOSA
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
+	depends on MACH_TOSA && NET
 	select RFKILL
 	help
 	  This is a simple driver that is able to control
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 37d8d85662f0..913a319c7b00 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1203,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 
 static struct mmp_dma_platdata pxa_dma_pdata = {
 	.dma_channels	= 0,
+	.nb_requestors	= 0,
 };
 
 static struct resource pxa_dma_resource[] = {
@@ -1231,7 +1232,7 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels)
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 0b00b226f54b..e838b11fb8c7 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static struct platform_device e7xx_gpio_vbus = {
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
 	.name	= "gpio-vbus",
 	.id	= -1,
 	.dev	= {
@@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = {
 };
 
 /* Some e-series hardware cannot control the 32K clock */
-static void __init eseries_register_clks(void)
+static void __init __maybe_unused eseries_register_clks(void)
 {
 	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
 }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6815a9357774..9c5b2fb054f9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void)
 {
 	int timeout = 500;
 
-	if (!(OSCC & OSCC_OOK))
+	if (!(readl(OSCC) & OSCC_OOK))
 		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
 	else
 		return;
 
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 	do {
-		if (OSCC & OSCC_OOK)
+		if (readl(OSCC) & OSCC_OOK)
 			break;
 		udelay(1);
 	} while (--timeout);
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index f1dd62946b36..5537d5601d70 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -134,10 +134,10 @@
 /*
  * PXA2xx specific Core clock definitions
  */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+#define CCCR		io_p2v(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		io_p2v(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
+#define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
 #define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
 #define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index f4d48d20754e..888bf7ade15a 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -18,7 +18,7 @@
 /*
  * Oscillator Configuration Register (OSCC)
  */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
 
 #define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
 
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
index 51558bcee999..3aab90d8d2b7 100644
--- a/arch/arm/mach-pxa/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
 extern void pxa_pm_finish(void);
 
+extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+extern int pxa3xx_finish_suspend(unsigned long);
+
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
  * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 8e0e62ccdced..f128133a8f30 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -19,42 +19,18 @@
 #include "generic.h"
 
 #ifdef CONFIG_PXA3xx
-static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("marvell,pxa3xx-nand",	0x43100000, "pxa3xx-nand", NULL),
-	{}
-};
-
-static void __init pxa3xx_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     pxa3xx_auxdata_lookup, NULL);
-}
-
 static const char *const pxa3xx_dt_board_compat[] __initconst = {
 	"marvell,pxa300",
 	"marvell,pxa310",
 	"marvell,pxa320",
 	NULL,
 };
-#endif
 
-#ifdef CONFIG_PXA3xx
 DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_dt_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
-	.init_machine	= pxa3xx_dt_init,
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index a177bf45feef..823504f48f80 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -206,7 +206,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16);
+		pxa2xx_set_dmac_info(16, 40);
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8dfd1755c659..2eaa341dd3f8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+		asm volatile(".arch_extension xscale\n\t"
+			     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 		break;
 	}
@@ -309,7 +311,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32);
+			pxa2xx_set_dmac_info(32, 75);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index a1c4c888f246..3c9184d1d6b9 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -68,7 +68,6 @@ static unsigned long wakeup_src;
  */
 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 {
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
 
 	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
@@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
-	extern int pxa3xx_finish_suspend(unsigned long);
-
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
@@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 }
 
@@ -450,7 +449,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32);
+		pxa2xx_set_dmac_info(32, 100);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 825f903ab77e..d9578bc49fdc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void)
 }
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
+static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
 	unsigned short cpr;
 	unsigned long flags;
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 515b7ddda8aa..3b94ecfb9426 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -910,7 +910,7 @@ static void __init zeus_map_io(void)
 	PMCR = PSPR = 0;
 
 	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 
 	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
 	 * float chip selects and PCMCIA */