Merge tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux into next/cleanup

This is the pxa changes for v4.4 cycle.

This cycle is bigger than usual :
 - magician was greatly enhanced (new IPs discovered, ...)
 - almost all legacy board files have been updated to the
   new PWM API (mostly for backlight control)
 - some minor fixes in raumfeld, z2 and mioa701

* tag 'pxa-for-4.4' of https://github.com/rjarzmik/linux: (44 commits)
  ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
  ARM: pxa: raumfeld: make some variables static
  ARM: pxa: magician: Remove pdata for pasic3-leds
  ARM: pxa: magician: Add support for PXA27x UDC
  ARM: pxa: magician: Add support for MAX1587A Vcore regulator
  ARM: pxa: magician: Change comments to be more informative
  ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()
  ARM: pxa: magician: Add missing regulator for PWM backlight
  ARM: pxa: magician: Add debug message for backlight brightness function
  ARM: pxa: magician: Remove definition of the STUART port
  ARM: pxa: magician: Fix wrongly enabled USB host ports
  ARM: pxa: magician: Fix support for Intel Strata NOR Flash
  ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
  ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
  ARM: pxa: magician: Fix and add charging detection functions
  ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
  ARM: pxa: magician: Rename charger cable detection EGPIOs
  ARM: pxa: magician: Optimize powerup delays for Samsung LCD
  ARM: pxa: magician: Rename abstract LCD GPIOs
  ARM: pxa: magician: Add new discovered EGPIO pins
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

22 files changed, 608 insertions, 340 deletions

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 5851f4c254c1..a7dae60810e8 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
@@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.pwm_id		= 2,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = {
 
 static void cm_x300_init_bl(void)
 {
+	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
 	platform_device_register(&cm_x300_backlight_device);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3aa264640c9d..db20d25daaab 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data income_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0x3ff,
 	.dft_brightness	= 0x1ff,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 };
 
@@ -202,6 +206,7 @@ static struct platform_device income_backlight = {
 
 static void __init income_pwm_init(void)
 {
+	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
 	platform_device_register(&income_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c62473235a13..2a6e0ae2b920 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = {
 		.end    = IRQ_ICP,
 		.flags  = IORESOURCE_IRQ,
 	},
+	[3] = {
+		.start  = 0x40800000,
+		.end	= 0x4080001b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[4] = {
+		.start  = 0x40700000,
+		.end	= 0x40700023,
+		.flags  = IORESOURCE_MEM,
+	},
+	[5] = {
+		.start  = 17,
+		.end	= 17,
+		.flags  = IORESOURCE_DMA,
+	},
+	[6] = {
+		.start  = 18,
+		.end	= 18,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device pxa_device_ficp = {
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index ab93441e596e..9a9c15bfcd34 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -49,11 +50,14 @@
 #define GPIO19_GEN1_CAM_RST		19
 #define GPIO28_GEN2_CAM_RST		28
 
+static struct pwm_lookup ezx_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -817,6 +821,7 @@ static void __init a780_init(void)
 		platform_device_register(&a780_camera);
 	}
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5fb41ad6e3bc..b076a835eb21 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = {
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
 	.enable_gpio    = -1,
 };
 
@@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
 	.num_chipselect = 1,
-	.clock_enable   = CKEN_SSP2,
 	.enable_dma     = 1,
 };
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 9b0eb0252af6..a1869f9b6219 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
-	.clock_enable   = CKEN_SSP3,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
 
 static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
-	.clock_enable   = CKEN_SSP4,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index ba6a6e1d29e9..5f6b850ebe33 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -52,9 +52,9 @@
 #define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
 #define GPIO102_MAGICIAN_KEY_PHONE		102
 #define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
+#define GPIO105_MAGICIAN_LCD_VON_EN		105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
 #define GPIO107_MAGICIAN_DS1WM_IRQ		107
 #define GPIO108_MAGICIAN_GSM_READY		108
 #define GPIO114_MAGICIAN_UNKNOWN		114
@@ -78,43 +78,51 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
 /* output */
 
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
 
 /* input */
 
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
 
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
 
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
 
 #endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index 599b925a657c..1a4291936c58 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -19,7 +19,7 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern int pxa27x_set_pwrmode(unsigned int mode);
 extern void pxa27x_cpu_pm_enter(suspend_state_t state);
 
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 4823d972e647..5fcd4f094900 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
@@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = {
 	},
 };
 
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1,
 	.dft_brightness	= 1,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -474,6 +478,7 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a9761c293028..896b268c3ab7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -24,8 +24,10 @@
 #include <linux/mfd/htc-pasic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
@@ -43,6 +45,12 @@
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
 #include "devices.h"
 #include "generic.h"
 
@@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO20_nSDCS_2,
 	GPIO21_nSDCS_3,
 	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* PASIC3 */
-	GPIO79_nCS_3,   /* EGPIO CPLD */
+	GPIO78_nCS_2,	/* PASIC3 */
+	GPIO79_nCS_3,	/* EGPIO CPLD */
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
-	/* I2C */
+	/* I2C UDA1380 + OV9640 */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
-	/* PWM 0 */
+	/* PWM 0 - LCD backlight */
 	GPIO16_PWM0_OUT,
 
-	/* I2S */
+	/* I2S UDA1380 capture */
 	GPIO28_I2S_BITCLK_OUT,
 	GPIO29_I2S_SDATA_IN,
 	GPIO31_I2S_SYNC,
 	GPIO113_I2S_SYSCLK,
 
-	/* SSP 1 */
+	/* SSP 1 UDA1380 playback */
 	GPIO23_SSP1_SCLK,
 	GPIO24_SSP1_SFRM,
 	GPIO25_SSP1_TXD,
 
-	/* SSP 2 */
+	/* SSP 2 TSC2046 touchscreen */
 	GPIO19_SSP2_SCLK,
 	GPIO14_SSP2_SFRM,
 	GPIO89_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
-	/* MMC */
+	/* MMC/SD/SDHC slot */
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
 	GPIO109_MMC_DAT_1,
@@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = {
 	/* LCD */
 	GPIOxx_LCD_TFT_16BPP,
 
-	/* QCI */
+	/* QCI camera interface */
 	GPIO12_CIF_DD_7,
 	GPIO17_CIF_DD_6,
 	GPIO50_CIF_DD_3,
@@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = {
 };
 
 /*
- * IRDA
+ * IrDA
  */
 
 static struct pxaficp_platform_data magician_ficp_info = {
 	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.gpio_pwdown_inverted	= 0,
 };
 
 /*
@@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = {
 
 #define INIT_KEY(_code, _gpio, _desc)	\
 	{				\
-		.code   = KEY_##_code,	\
-		.gpio   = _gpio,	\
-		.desc   = _desc,	\
-		.type   = EV_KEY,	\
-		.wakeup = 1,		\
+		.code	= KEY_##_code,	\
+		.gpio	= _gpio,	\
+		.desc	= _desc,	\
+		.type	= EV_KEY,	\
+		.wakeup	= 1,		\
 	}
 
 static struct gpio_keys_button magician_button_table[] = {
@@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = {
 };
 
 static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons  = magician_button_table,
-	.nbuttons = ARRAY_SIZE(magician_button_table),
+	.buttons	= magician_button_table,
+	.nbuttons	= ARRAY_SIZE(magician_button_table),
 };
 
 static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
+	.name	= "gpio-keys",
+	.dev	= {
 		.platform_data = &gpio_keys_data,
 	},
-	.id   = -1,
+	.id	= -1,
 };
 
-
 /*
  * EGPIO (Xilinx CPLD)
  *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
  */
 
 static struct resource egpio_resources[] = {
 	[0] = {
-		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20 - 1,
-		.flags = IORESOURCE_MEM,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags = IORESOURCE_IRQ,
+		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
 	[0] = {
-		.reg_start = 0,
-		.gpio_base = MAGICIAN_EGPIO(0, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_OUTPUT,
-		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+		.reg_start	= 0,
+		.gpio_base	= MAGICIAN_EGPIO(0, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_OUTPUT,
+		/*
+		 * Depends on modules configuration
+		 */
+		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
 	},
 	[1] = {
-		.reg_start = 4,
-		.gpio_base = MAGICIAN_EGPIO(4, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_INPUT,
+		.reg_start	= 4,
+		.gpio_base	= MAGICIAN_EGPIO(4, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_INPUT,
 	},
 };
 
 static struct htc_egpio_platform_data egpio_info = {
-	.reg_width    = 8,
-	.bus_width    = 32,
-	.irq_base     = IRQ_BOARD_START,
-	.num_irqs     = 4,
-	.ack_register = 3,
-	.chip         = egpio_chips,
-	.num_chips    = ARRAY_SIZE(egpio_chips),
+	.reg_width	= 8,
+	.bus_width	= 32,
+	.irq_base	= IRQ_BOARD_START,
+	.num_irqs	= 4,
+	.ack_register	= 3,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
 };
 
 static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
 	.dev = {
 		.platform_data = &egpio_info,
 	},
 };
 
 /*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
  */
 
 static struct pxafb_mode_info toppoly_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 11,
-		.vsync_len    = 3,
-		.left_margin  = 19,
-		.upper_margin = 2,
-		.right_margin = 10,
-		.lower_margin = 2,
-		.sync         = 0,
+		.pixclock	= 96153,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 11,
+		.vsync_len	= 3,
+		.left_margin	= 19,
+		.upper_margin	= 2,
+		.right_margin	= 10,
+		.lower_margin	= 2,
+		.sync		= 0,
 	},
 };
 
 static struct pxafb_mode_info samsung_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 8,
-		.vsync_len    = 4,
-		.left_margin  = 9,
-		.upper_margin = 4,
-		.right_margin = 9,
-		.lower_margin = 4,
-		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.pixclock	= 226469,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 4,
+		.left_margin	= 9,
+		.upper_margin	= 4,
+		.right_margin	= 9,
+		.lower_margin	= 4,
+		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
 static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Toppoly LCD power\n");
+	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
 		udelay(2000);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
 		udelay(2000);
 		/* FIXME: enable LCDC here */
 		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
 		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
 		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
 		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
 		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
 	}
 }
 
 static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Samsung LCD power\n");
+	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
 		else
 			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		mdelay(10);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		mdelay(30);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-		mdelay(10);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+		mdelay(6);	/* Avdd -> Voff >5ms */
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+		mdelay(16);	/* Voff -> Von >(5+10)ms */
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
-		mdelay(10);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		mdelay(30);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		mdelay(10);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+		mdelay(16);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+		mdelay(6);
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
 		else
@@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 }
 
 static struct pxafb_mach_info toppoly_info = {
-	.modes           = toppoly_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power = toppoly_lcd_power,
+	.modes			= toppoly_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP,
+	.pxafb_lcd_power	= toppoly_lcd_power,
 };
 
 static struct pxafb_mach_info samsung_info = {
-	.modes           = samsung_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
-			   LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power = samsung_lcd_power,
+	.modes			= samsung_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+		LCD_ALTERNATE_MAPPING,
+	.pxafb_lcd_power	= samsung_lcd_power,
 };
 
 /*
  * Backlight
  */
 
+static struct pwm_lookup magician_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+		   PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+	REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
 static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
+	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
 };
 
 static int magician_backlight_init(struct device *dev)
@@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev)
 
 static int magician_backlight_notify(struct device *dev, int brightness)
 {
+	pr_debug("Brightness = %i\n", brightness);
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {
 		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
@@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev)
 	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 272,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-	.enable_gpio    = -1,
-	.init           = magician_backlight_init,
-	.notify         = magician_backlight_notify,
-	.exit           = magician_backlight_exit,
+	.max_brightness	= 272,
+	.dft_brightness	= 100,
+	.enable_gpio	= -1,
+	.init		= magician_backlight_init,
+	.notify		= magician_backlight_notify,
+	.exit		= magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm0.dev,
-		.platform_data = &backlight_data,
+	.name	= "pwm-backlight",
+	.id	= -1,
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &backlight_data,
 	},
 };
 
 /*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
  */
 
 static struct gpio_led gpio_leds[] = {
@@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = {
 };
 
 static struct platform_device leds_gpio = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev  = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &gpio_led_info,
 	},
 };
 
-static struct pasic3_led pasic3_leds[] = {
-	{
-		.led = {
-			.name            = "magician:red",
-			.default_trigger = "ds2760-battery.0-charging",
-		},
-		.hw_num = 0,
-		.bit2   = PASIC3_BIT2_LED0,
-		.mask   = PASIC3_MASK_LED0,
-	},
-	{
-		.led = {
-			.name            = "magician:green",
-			.default_trigger = "ds2760-battery.0-charging-or-full",
-		},
-		.hw_num = 1,
-		.bit2   = PASIC3_BIT2_LED1,
-		.mask   = PASIC3_MASK_LED1,
-	},
-	{
-		.led = {
-			.name            = "magician:blue",
-			.default_trigger = "bluetooth",
-		},
-		.hw_num = 2,
-		.bit2   = PASIC3_BIT2_LED2,
-		.mask   = PASIC3_MASK_LED2,
-	},
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
-	.num_leds   = ARRAY_SIZE(pasic3_leds),
-	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-	.leds       = pasic3_leds,
-};
-
 /*
  * PASIC3 with DS1WM
  */
 
 static struct resource pasic3_resources[] = {
 	[0] = {
-		.start  = PXA_CS2_PHYS,
+		.start	= PXA_CS2_PHYS,
 		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags  = IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM,
 	},
 	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
 	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct pasic3_platform_data pasic3_platform_data = {
-	.led_pdata  = &pasic3_leds_info,
 	.clock_rate = 4000000,
 };
 
@@ -493,25 +483,42 @@ static struct platform_device pasic3 = {
 };
 
 /*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+	.udc_command	= magician_udc_command,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
  */
 
 static struct resource gpio_vbus_resource = {
-	.flags = IORESOURCE_IRQ,
-	.start = IRQ_MAGICIAN_VBUS,
-	.end   = IRQ_MAGICIAN_VBUS,
+	.flags	= IORESOURCE_IRQ,
+	.start	= IRQ_MAGICIAN_VBUS,
+	.end	= IRQ_MAGICIAN_VBUS,
 };
 
 static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+	.gpio_vbus	= EGPIO_MAGICIAN_CABLE_VBUS,
 };
 
 static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.num_resources = 1,
-	.resource      = &gpio_vbus_resource,
+	.name		= "gpio-vbus",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpio_vbus_resource,
 	.dev = {
 		.platform_data = &gpio_vbus_info,
 	},
@@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = {
  * External power
  */
 
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+	int ret = -1;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+	if (ret) {
+		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+		goto err_ac;
+	}
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+	if (ret) {
+		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+		goto err_usb;
+	}
+
+	return 0;
+
+err_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+	return ret;
+}
+
+static void magician_set_charge(int flags)
 {
-	return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (flags & PDA_POWER_CHARGE_AC) {
+		pr_debug("Charging from AC\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else if (flags & PDA_POWER_CHARGE_USB) {
+		pr_debug("Charging from USB\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else {
+		pr_debug("Charging disabled\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+	}
 }
 
 static int magician_is_ac_online(void)
 {
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
 }
 
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
 {
-	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
 }
 
 static char *magician_supplicants[] = {
@@ -541,38 +589,40 @@ static char *magician_supplicants[] = {
 };
 
 static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = magician_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = magician_supplicants,
-	.num_supplicants = ARRAY_SIZE(magician_supplicants),
+	.init			= magician_supply_init,
+	.exit			= magician_supply_exit,
+	.is_ac_online		= magician_is_ac_online,
+	.is_usb_online		= magician_is_usb_online,
+	.set_charge		= magician_set_charge,
+	.supplied_to		= magician_supplicants,
+	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
 };
 
 static struct resource power_supply_resources[] = {
 	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "ac",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "usb",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 };
 
 static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
+	.name	= "pda-power",
+	.id	= -1,
+	.dev = {
 		.platform_data = &power_supply_info,
 	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
+	.resource	= power_supply_resources,
+	.num_resources	= ARRAY_SIZE(power_supply_resources),
 };
 
 /*
@@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+		.max_uA		= 500000,
+		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
+			REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies	= bq24022_consumers,
 };
 
 static struct gpio bq24022_gpios[] = {
@@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = {
 };
 
 static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
+	.supply_name		= "bq24022",
 
-	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
+	.enable_gpio		= GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
 
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+	.gpios			= bq24022_gpios,
+	.nr_gpios		= ARRAY_SIZE(bq24022_gpios),
 
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
+	.states			= bq24022_states,
+	.nr_states		= ARRAY_SIZE(bq24022_states),
 
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
+	.type			= REGULATOR_CURRENT,
+	.init_data		= &bq24022_init_data,
 };
 
 static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
+	.name	= "gpio-regulator",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &bq24022_info,
 	},
 };
 
 /*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 700000,
+		.max_uV		= 1475000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= magician_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &magician_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+	.subdevs     = magician_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+	/*
+	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
+	 * if R24 is present, it will boost the voltage
+	 * (write 1.475V, get 1.645V and smoke)
+	 */
+	.v3_gain     = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &magician_max1587a_info,
+	},
+};
+
+/*
  * MMC/SD
  */
 
 static int magician_mci_init(struct device *dev,
-				irq_handler_t detect_irq, void *data)
+	irq_handler_t detect_irq, void *data)
 {
 	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-			   "mmc card detect", data);
+		"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
@@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     		= magician_mci_init,
-	.exit     		= magician_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= magician_mci_init,
+	.exit			= magician_mci_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
 	.gpio_card_ro_invert	= 1,
@@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = {
 
 static struct pxaohci_platform_data magician_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	/* port1: CSR Bluetooth, port2: OTG with UDC */
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.power_budget	= 0,
+	.power_on_delay = 100,
 };
 
-
 /*
  * StrataFlash
  */
 
+static int magician_flash_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+	if (ret) {
+		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+		return ret;
+	}
+
+	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+	if (ret) {
+		pr_err("Cannot set direction for flash enable (%i)\n", ret);
+		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+	}
+
+	return ret;
+}
+
 static void magician_set_vpp(struct platform_device *pdev, int vpp)
 {
 	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
 }
 
+static void magician_flash_exit(struct platform_device *pdev)
+{
+	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
 static struct resource strataflash_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
 };
 
+static struct mtd_partition magician_flash_parts[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x0,
+		.size		= 0x40000,
+		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
+	},
+	{
+		.name		= "Linux Kernel",
+		.offset		= 0x40000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+/*
+ * physmap-flash driver
+ */
+
 static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = magician_set_vpp,
+	.width		= 4,
+	.init		= magician_flash_init,
+	.set_vpp	= magician_set_vpp,
+	.exit		= magician_flash_exit,
+	.parts		= magician_flash_parts,
+	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
 };
 
 static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = &strataflash_resource,
-	.num_resources = 1,
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &strataflash_resource,
+	.num_resources	= 1,
 	.dev = {
 		.platform_data = &strataflash_data,
 	},
 };
 
 /*
- * I2C
+ * PXA I2C main controller
  */
 
 static struct i2c_pxa_platform_data i2c_info = {
-	.fast_mode = 1,
+	/* OV9640 I2C device doesn't support fast mode */
+	.fast_mode	= 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+	.fast_mode	= 1,
 };
 
 /*
@@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
+	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
 	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
-	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
-	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
-	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+	/* NOTICE valid LCD init sequence */
+	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
 };
 
 static void __init magician_init(void)
@@ -737,44 +890,55 @@ static void __init magician_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
 	if (err)
-		pr_err("magician: Failed to request GPIOs: %d\n", err);
+		pr_err("magician: Failed to request global GPIOs: %d\n", err);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
 
-	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
 
 	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
 	pxa_set_i2c_info(&i2c_info);
+
+	i2c_register_board_info(1,
+		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
+	pxa_set_udc_info(&magician_udc_info);
 
 	/* Check LCD type we have */
 	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
 	if (cpld) {
-		u8 board_id = __raw_readb(cpld+0x14);
+		u8 board_id = __raw_readb(cpld + 0x14);
+
 		iounmap(cpld);
 		system_rev = board_id & 0x7;
 		lcd_select = board_id & 0x8;
 		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
 		if (lcd_select && (system_rev < 3))
+			/* NOTICE valid LCD init sequence */
 			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
-		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
+				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+		pxa_set_fb_info(NULL,
+			lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
-}
 
+	regulator_register_always_on(0, "power", pwm_backlight_supply,
+		ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+}
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset = 0x100,
-	.map_io = pxa27x_map_io,
-	.nr_irqs = MAGICIAN_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_machine = magician_init,
+	.atag_offset	= 0x100,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= MAGICIAN_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_machine	= magician_init,
 	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 2c0658cf6be2..c3a87c176d72 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = {
 
 static void __init mainstone_backlight_register(void)
 {
-	int ret = platform_device_register(&mainstone_backlight_device);
-	if (ret)
+	int ret;
+
+	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+	ret = platform_device_register(&mainstone_backlight_device);
+	if (ret) {
 		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+		pwm_remove_table(mainstone_pwm_lookup,
+				 ARRAY_SIZE(mainstone_pwm_lookup));
+	}
 }
 #else
 #define mainstone_backlight_register()	do { } while (0)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bde277d..3b52b1aa0659 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/rtc.h>
 #include <linux/leds.h>
@@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = {
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
 
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* LCD Screen and Backlight */
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 50,
-	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
 	.enable_gpio	= -1,
 };
 
@@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
 MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+MIO_SIMPLE_DEV(wm9713_acodec,	  "wm9713-codec",   NULL);
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
 MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
@@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
 	&mioa701_backlight,
 	&mioa701_led,
+	&wm9713_acodec,
 	&pxa2xx_pcm,
 	&mioa701_sound,
 	&power_dev,
@@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
+	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index e54a296fb81f..13eba2b26e0a 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -15,6 +15,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int palm_bl_power;
 static int palm_lcd_power;
 
@@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500 * 1024,
 	.enable_gpio	= -1,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
@@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
 {
 	palm_bl_power	= bl;
 	palm_lcd_power	= lcd;
+	pwm_add_lookup(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
 	platform_device_register(&palm27x_backlight);
 }
 #endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 7691c974ca4b..aebf6de62468 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/input/matrix_keypad.h>
@@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+		   PWM_PERIOD_NORMAL),
+};
+
 static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= PALMTC_MAX_INTENSITY,
 	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTC_PERIOD_NS,
 	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
 };
 
@@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = {
 
 static void __init palmtc_pwm_init(void)
 {
+	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
 	platform_device_register(&palmtc_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 956fd24ee6fd..e64bb4326e69 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
 static struct gpio palmte_bl_gpios[] = {
 	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
 	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
@@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= PALMTE2_MAX_INTENSITY,
 	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTE2_PERIOD_NS,
 	.enable_gpio	= -1,
 	.init		= palmte2_backlight_init,
 	.notify		= palmte2_backlight_notify,
@@ -355,6 +359,7 @@ static void __init palmte2_init(void)
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 
+	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d8319b54299a..b71c96f614f9 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/mt9v022.h>
@@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = {
 };
 #endif
 
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
+	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 221260d5d109..ffc424028557 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int __init pxa27x_set_pwrmode(unsigned int mode)
+int pxa27x_set_pwrmode(unsigned int mode)
 {
 	switch (mode) {
 	case PWRMODE_SLEEP:
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 88f70c37ad0d..36571a9a44fe 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -29,6 +29,7 @@
 #include <linux/leds.h>
 #include <linux/w1-gpio.h>
 #include <linux/sched.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -507,7 +508,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
 	.ext_pullup_enable_pin	= -EINVAL,
 };
 
-struct platform_device raumfeld_w1_gpio_device = {
+static struct platform_device raumfeld_w1_gpio_device = {
 	.name	= "w1-gpio",
 	.dev	= {
 		.platform_data = &w1_gpio_platform_data
@@ -531,13 +532,15 @@ static void __init raumfeld_w1_init(void)
  * Framebuffer device
  */
 
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* PWM controlled backlight */
 static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	/* 10000 ns = 10 ms ^= 100 kHz */
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -618,6 +621,8 @@ static void __init raumfeld_lcd_init(void)
 	} else {
 		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
 		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		pwm_add_table(raumfeld_pwm_lookup,
+			      ARRAY_SIZE(raumfeld_pwm_lookup));
 		platform_device_register(&raumfeld_pwm_backlight_device);
 	}
 
@@ -629,7 +634,7 @@ static void __init raumfeld_lcd_init(void)
  * SPI devices
  */
 
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
 	.sck		= GPIO_SPI_CLK,
 	.mosi		= GPIO_SPI_MOSI,
 	.miso		= GPIO_SPI_MISO,
@@ -848,7 +853,7 @@ static void __init raumfeld_power_init(void)
 static struct regulator_consumer_supply audio_va_consumer_supply =
 	REGULATOR_SUPPLY("va", "0-0048");
 
-struct regulator_init_data audio_va_initdata = {
+static struct regulator_init_data audio_va_initdata = {
 	.consumer_supplies = &audio_va_consumer_supply,
 	.num_consumer_supplies = 1,
 	.constraints = {
@@ -880,7 +885,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vlc", "0-0048"),
 };
 
-struct regulator_init_data audio_dummy_initdata = {
+static struct regulator_init_data audio_dummy_initdata = {
 	.consumer_supplies = audio_dummy_supplies,
 	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
 	.constraints = {
@@ -928,7 +933,7 @@ static struct regulator_init_data vcc_mmc_init_data = {
 	.num_consumer_supplies = 1,
 };
 
-struct max8660_subdev_data max8660_v6_subdev_data = {
+static struct max8660_subdev_data max8660_v6_subdev_data = {
 	.id		= MAX8660_V6,
 	.name		= "vmmc",
 	.platform_data	= &vcc_mmc_init_data,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index a71da84e784b..349a13a76215 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,6 +18,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
@@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {}
 #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
 	[0] = {
 		/* primary backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* secondary backlight */
-		.pwm_id		= 0,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 };
@@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = {
 
 static void __init tavorevb_init_lcd(void)
 {
+	pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
 	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 8ab26370107e..7ecc61ad2bed 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -39,6 +39,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/usb/isp116x.h>
 #include <linux/mtd/mtd.h>
@@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static struct pwm_lookup viper_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int viper_backlight_init(struct device *dev)
 {
 	int ret;
@@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
@@ -939,6 +943,7 @@ static void __init viper_init(void)
 		smc91x_device.num_resources--;
 
 	pxa_set_i2c_info(NULL);
+	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
 	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
 
 	viper_init_vcore_gpios();
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b36cfa..d9899d73e46b 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
@@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data z2_backlight_data[] = {
 	[0] = {
 		/* Keypad Backlight */
-		.pwm_id		= 1,
 		.max_brightness	= 1023,
 		.dft_brightness	= 0,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* LCD Backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 1023,
 		.dft_brightness	= 512,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 };
@@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = {
 };
 static void __init z2_pwm_init(void)
 {
+	pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
 	platform_device_register(&z2_backlight_devices[0]);
 	platform_device_register(&z2_backlight_devices[1]);
 }
@@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp1_master_info = {
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.clock_enable	= CKEN_SSP2,
 	.num_chipselect	= 1,
 };
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 77daea478e88..e20359a7433c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
@@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.pwm_id		= 3,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 
 static void __init zylonite_init_lcd(void)
 {
+	pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {