Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 293 insertions, 0 deletions

diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
new file mode 100644
index 000000000000..6a60b497ab42
--- /dev/null
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -0,0 +1,293 @@
+/*
+ * linux/arch/arm/mach-sa1100/badge4.c
+ *
+ * BadgePAD 4 specific initialization
+ *
+ *   Tim Connors <connors@hpl.hp.com>
+ *   Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/errno.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/arch/irqs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/sa1111.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <asm/arch/badge4.h>
+
+#include "generic.h"
+
+static struct resource sa1111_resources[] = {
+	[0] = {
+		.start		= BADGE4_SA1111_BASE,
+		.end		= BADGE4_SA1111_BASE + 0x00001fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= BADGE4_IRQ_GPIO_SA1111,
+		.end		= BADGE4_IRQ_GPIO_SA1111,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 sa1111_dmamask = 0xffffffffUL;
+
+static struct platform_device sa1111_device = {
+	.name		= "sa1111",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &sa1111_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa1111_resources),
+	.resource	= sa1111_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&sa1111_device,
+};
+
+static int __init badge4_sa1111_init(void)
+{
+	/*
+	 * Ensure that the memory bus request/grant signals are setup,
+	 * and the grant is held in its inactive state
+	 */
+	sa1110_mb_disable();
+
+	/*
+	 * Probe for SA1111.
+	 */
+	return platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+
+/*
+ * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit)
+ *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
+ *   Sixty-three 32 KiW Main Blocks (4032 Ki b)
+ *
+ * <or>
+ *
+ * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit)
+ *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
+ *   One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
+ */
+static struct mtd_partition badge4_partitions[] = {
+        {
+                .name           = "BLOB boot loader",
+                .offset         = 0,
+                .size           = 0x0000A000
+        }, {
+                .name           = "params",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 0x00006000
+        }, {
+                .name           = "root",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL
+        }
+};
+
+static struct flash_platform_data badge4_flash_data = {
+	.map_name	= "cfi_probe",
+	.parts		= badge4_partitions,
+	.nr_parts	= ARRAY_SIZE(badge4_partitions),
+};
+
+static struct resource badge4_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_64M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static int five_v_on __initdata = 0;
+
+static int __init five_v_on_setup(char *ignore)
+{
+        five_v_on = 1;
+	return 1;
+}
+__setup("five_v_on", five_v_on_setup);
+
+
+static int __init badge4_init(void)
+{
+	int ret;
+
+	if (!machine_is_badge4())
+		return -ENODEV;
+
+	/* LCD */
+	GPCR  = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
+		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
+		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
+		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
+		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
+		 BADGE4_GPIO_GPC_VID);
+	GPDR &= ~BADGE4_GPIO_INT_VID;
+	GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
+		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
+		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
+		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
+		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
+		 BADGE4_GPIO_GPC_VID);
+
+	/* SDRAM SPD i2c */
+	GPCR  = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
+	GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
+
+	/* uart */
+	GPCR  = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
+	GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
+
+	/* CPLD muxsel0 input for mux/adc chip select */
+	GPCR  = BADGE4_GPIO_MUXSEL0;
+	GPDR |= BADGE4_GPIO_MUXSEL0;
+
+	/* test points: J5, J6 as inputs, J7 outputs */
+	GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6);
+	GPCR  = BADGE4_GPIO_TESTPT_J7;
+	GPDR |= BADGE4_GPIO_TESTPT_J7;
+
+ 	/* 5V supply rail. */
+ 	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
+  	GPDR |= BADGE4_GPIO_PCMEN5V;
+
+	/* CPLD sdram type inputs; set up by blob */
+	//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
+	printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
+	       !!(GPLR & BADGE4_GPIO_SDTYP1),
+	       !!(GPLR & BADGE4_GPIO_SDTYP0));
+
+	/* SA1111 reset pin; set up by blob */
+	//GPSR  = BADGE4_GPIO_SA1111_NRST;
+	//GPDR |= BADGE4_GPIO_SA1111_NRST;
+
+
+	/* power management cruft */
+	PGSR = 0;
+	PWER = 0;
+	PCFR = 0;
+	PSDR = 0;
+
+	PWER |= PWER_GPIO26;	/* wake up on an edge from TESTPT_J5 */
+	PWER |= PWER_RTC;	/* wake up if rtc fires */
+
+	/* drive sa1111_nrst during sleep */
+	PGSR |= BADGE4_GPIO_SA1111_NRST;
+	/* drive CPLD as is during sleep */
+	PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1));
+
+
+	/* Now bring up the SA-1111. */
+	ret = badge4_sa1111_init();
+	if (ret < 0)
+		printk(KERN_ERR
+		       "%s: SA-1111 initialization failed (%d)\n",
+		       __FUNCTION__, ret);
+
+
+	/* maybe turn on 5v0 from the start */
+	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
+
+	sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+
+	return 0;
+}
+
+arch_initcall(badge4_init);
+
+
+static unsigned badge4_5V_bitmap = 0;
+
+void badge4_set_5V(unsigned subsystem, int on)
+{
+	unsigned long flags;
+	unsigned old_5V_bitmap;
+
+	local_irq_save(flags);
+
+	old_5V_bitmap = badge4_5V_bitmap;
+
+	if (on) {
+		badge4_5V_bitmap |= subsystem;
+	} else {
+		badge4_5V_bitmap &= ~subsystem;
+	}
+
+	/* detect on->off and off->on transitions */
+	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
+		/* was off, now on */
+		printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__);
+		GPSR = BADGE4_GPIO_PCMEN5V;
+	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
+		/* was on, now off */
+		printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__);
+		GPCR = BADGE4_GPIO_PCMEN5V;
+	}
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(badge4_set_5V);
+
+
+static struct map_desc badge4_io_desc[] __initdata = {
+  /*  virtual    physical    length    type */
+  {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM  bank 1 */
+  {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM  bank 2 */
+  {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111      */
+};
+
+static void
+badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+	if (!state) {
+		Ser1SDCR0 |= SDCR0_UART;
+	}
+}
+
+static struct sa1100_port_fns badge4_port_fns __initdata = {
+	//.get_mctrl	= badge4_get_mctrl,
+	//.set_mctrl	= badge4_set_mctrl,
+	.pm		= badge4_uart_pm,
+};
+
+static void __init badge4_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc));
+
+	sa1100_register_uart_fns(&badge4_port_fns);
+	sa1100_register_uart(0, 3);
+	sa1100_register_uart(1, 1);
+}
+
+MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
+	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
+	BOOT_PARAMS(0xc0000100)
+	MAPIO(badge4_map_io)
+	INITIRQ(sa1100_init_irq)
+	.timer		= &sa1100_timer,
+MACHINE_END