Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

3 files changed, 54 insertions, 5 deletions

diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 4327b2c90c3d..e7259c0d33ec 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -60,6 +60,7 @@ extern struct dev_pm_domain omap_device_pm_domain;
  * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
  *
  * Integrates omap_hwmod data into Linux platform_device.
  *
@@ -73,6 +74,7 @@ struct omap_device {
 	struct omap_device_pm_latency	*pm_lats;
 	u32				dev_wakeup_lat;
 	u32				_dev_wakeup_lat_limit;
+	unsigned long			_driver_status;
 	u8				pm_lats_cnt;
 	s8				pm_lat_level;
 	u8				hwmods_cnt;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6132972aff37..9b9646c3673d 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -658,6 +658,7 @@ extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
 extern int omap44xx_hwmod_init(void);
+extern int am33xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index b59edb065c70..5c93c09a80c2 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -380,17 +380,21 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				      unsigned long event, void *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od;
 
 	switch (event) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		break;
-
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (pdev->dev.of_node)
+			omap_device_build_from_dt(pdev);
+		/* fall through */
+	default:
+		od = to_omap_device(pdev);
+		if (od)
+			od->_driver_status = event;
 	}
 
 	return NOTIFY_DONE;
@@ -747,6 +751,10 @@ static int _od_suspend_noirq(struct device *dev)
 	struct omap_device *od = to_omap_device(pdev);
 	int ret;
 
+	/* Don't attempt late suspend on a driver that is not bound */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
+		return 0;
+
 	ret = pm_generic_suspend_noirq(dev);
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
@@ -1120,3 +1128,41 @@ static int __init omap_device_init(void)
 	return 0;
 }
 core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if (!od)
+		return 0;
+
+	/*
+	 * If omap_device state is enabled, but has no driver bound,
+	 * idle it.
+	 */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
+				 __func__);
+			omap_device_idle(pdev);
+		}
+	}
+
+	return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+	return 0;
+}
+late_initcall(omap_device_late_init);