Merge tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:

- Consolidate uncompress subroutines and s5p64x0-uncompress
- Cleanup watchdog support on Samsung to support multiplatform

* tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 124 insertions, 80 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index f8ed2de0a678..ec68155a8bf1 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -475,6 +475,12 @@ config SAMSUNG_WAKEMASK
 	  and above. This code allows a set of interrupt to wakeup-mask
 	  mappings. See <plat/wakeup-mask.h>
 
+config SAMSUNG_WDT_RESET
+	bool
+	help
+	  Compile support for system restart by triggering watchdog reset.
+	  Used on SoCs that do not provide dedicated reset control.
+
 config S5P_PM
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index a23c460299a1..03cea140cfd0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
+obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
 
 obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
 obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o
diff --git a/arch/arm/plat-samsung/include/plat/regs-watchdog.h b/arch/arm/plat-samsung/include/plat/regs-watchdog.h
deleted file mode 100644
index 4938492470f7..000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 02b66d723d1a..4afc32f90b6d 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -21,6 +21,8 @@ typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
 unsigned int fifo_mask;
 unsigned int fifo_max;
 
+volatile u8 *uart_base;
+
 /* forward declerations */
 
 static void arch_detect_cpu(void);
@@ -28,19 +30,24 @@ static void arch_detect_cpu(void);
 /* defines for UART registers */
 
 #include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
 
 /* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+#define S3C_WDOGREG(x)	((S3C_PA_WDT + (x)))
+
+#define S3C2410_WTCON	S3C_WDOGREG(0x00)
+#define S3C2410_WTDAT	S3C_WDOGREG(0x04)
+#define S3C2410_WTCNT	S3C_WDOGREG(0x08)
+
+#define S3C2410_WTCON_RSTEN	(1 << 0)
+#define S3C2410_WTCON_ENABLE	(1 << 5)
+
+#define S3C2410_WTCON_DIV128	(3 << 3)
+
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
 
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
-#ifdef S3C_PA_UART
-#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
-#endif
-
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
 {
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index bc4db9b04e36..0386b8f76623 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -10,37 +10,11 @@
  * published by the Free Software Foundation.
 */
 
-#include <plat/clock.h>
-#include <plat/regs-watchdog.h>
-#include <mach/map.h>
+#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H
+#define __PLAT_SAMSUNG_WATCHDOG_RESET_H
 
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+extern void samsung_wdt_reset(void);
+extern void samsung_wdt_reset_of_init(void);
+extern void samsung_wdt_reset_init(void __iomem *base);
 
-static inline void arch_wdt_reset(void)
-{
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	if (!IS_ERR(s3c2410_wdtclk))
-		clk_enable(s3c2410_wdtclk);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-}
+#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */
diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c
new file mode 100644
index 000000000000..2ecb50bea044
--- /dev/null
+++ b/arch/arm/plat-samsung/watchdog-reset.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-samsung/watchdog-reset.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Watchdog reset support for Samsung SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define S3C2410_WTCON			0x00
+#define S3C2410_WTDAT			0x04
+#define S3C2410_WTCNT			0x08
+
+#define S3C2410_WTCON_ENABLE		(1 << 5)
+#define S3C2410_WTCON_DIV16		(0 << 3)
+#define S3C2410_WTCON_RSTEN		(1 << 0)
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
+
+static void __iomem *wdt_base;
+static struct clk *wdt_clock;
+
+void samsung_wdt_reset(void)
+{
+	if (!wdt_base) {
+		pr_err("%s: wdt reset not initialized\n", __func__);
+		/* delay to allow the serial port to show the message */
+		mdelay(50);
+		return;
+	}
+
+	if (!IS_ERR(wdt_clock))
+		clk_prepare_enable(wdt_clock);
+
+	/* disable watchdog, to be safe  */
+	__raw_writel(0, wdt_base + S3C2410_WTCON);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, wdt_base + S3C2410_WTCNT);
+	__raw_writel(0x80, wdt_base + S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
+			S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
+			wdt_base + S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	pr_err("Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c2410_wdt_match[] = {
+	{ .compatible = "samsung,s3c2410-wdt" },
+	{},
+};
+
+void __init samsung_wdt_reset_of_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, s3c2410_wdt_match);
+	if (!np) {
+		pr_err("%s: failed to find watchdog node\n", __func__);
+		return;
+	}
+
+	wdt_base = of_iomap(np, 0);
+	if (!wdt_base) {
+		pr_err("%s: failed to map watchdog registers\n", __func__);
+		return;
+	}
+
+	wdt_clock = of_clk_get(np, 0);
+}
+#endif
+
+void __init samsung_wdt_reset_init(void __iomem *base)
+{
+	wdt_base = base;
+	wdt_clock = clk_get(NULL, "watchdog");
+}