arm64: Build infrastructure

This patch adds Makefile and Kconfig files required for building an
AArch64 kernel.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 222 insertions, 0 deletions

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
new file mode 100644
index 000000000000..767ba5685454
--- /dev/null
+++ b/arch/arm64/Kconfig
@@ -0,0 +1,222 @@
+config ARM64
+	def_bool y
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_HARDIRQS_NO_DEPRECATED
+	select GENERIC_IOMAP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_TIME_VSYSCALL
+	select HARDIRQS_SW_RESEND
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_WORK
+	select HAVE_MEMBLOCK
+	select HAVE_PERF_EVENTS
+	select HAVE_SPARSE_IRQ
+	select IRQ_DOMAIN
+	select NO_BOOTMEM
+	select OF
+	select OF_EARLY_FLATTREE
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SPARSE_IRQ
+	help
+	  ARM 64-bit (AArch64) Linux support.
+
+config 64BIT
+	def_bool y
+
+config ARCH_PHYS_ADDR_T_64BIT
+	def_bool y
+
+config MMU
+	def_bool y
+
+config NO_IOPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CSUM
+        def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config ZONE_DMA32
+	def_bool y
+
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool y
+
+config NEED_DMA_MAP_STATE
+	def_bool y
+
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
+config SWIOTLB
+	def_bool y
+
+config IOMMU_HELPER
+	def_bool SWIOTLB
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+endmenu
+
+menu "Bus support"
+
+config ARM_AMBA
+	bool
+
+endmenu
+
+menu "Kernel Features"
+
+source "kernel/time/Kconfig"
+
+config ARM64_64K_PAGES
+	bool "Enable 64KB pages support"
+	help
+	  This feature enables 64KB pages support (4KB by default)
+	  allowing only two levels of page tables and faster TLB
+	  look-up. AArch32 emulation is not available when this feature
+	  is enabled.
+
+config SMP
+	bool "Symmetric Multi-Processing"
+	select USE_GENERIC_SMP_HELPERS
+	help
+	  This enables support for systems with more than one CPU.  If
+	  you say N here, the kernel will run on single and
+	  multiprocessor machines, but will use only one CPU of a
+	  multiprocessor machine. If you say Y here, the kernel will run
+	  on many, but not all, single processor machines. On a single
+	  processor machine, the kernel will run faster if you say N
+	  here.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	depends on SMP
+	default "4"
+
+source kernel/Kconfig.preempt
+
+config HZ
+	int
+	default 100
+
+config ARCH_HAS_HOLES_MEMORYMODEL
+	def_bool y if SPARSEMEM
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config HAVE_ARCH_PFN_VALID
+	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+
+config HW_PERF_EVENTS
+	bool "Enable hardware performance counter support for perf events"
+	depends on PERF_EVENTS
+	default y
+	help
+	  Enable hardware performance counter support for perf events. If
+	  disabled, perf events will use software events only.
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Boot options"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  Provide a set of default command-line options at build time by
+	  entering them here. As a minimum, you should specify the the
+	  root device (e.g. root=/dev/nfs).
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+config COMPAT
+	bool "Kernel support for 32-bit EL0"
+	depends on !ARM64_64K_PAGES
+	select COMPAT_BINFMT_ELF
+	help
+	  This option enables support for a 32-bit EL0 running under a 64-bit
+	  kernel at EL1. AArch32-specific components such as system calls,
+	  the user helper functions, VFP support and the ptrace interface are
+	  handled appropriately by the kernel.
+
+	  If you want to execute 32-bit userspace applications, say Y.
+
+config SYSVIPC_COMPAT
+	def_bool y
+	depends on COMPAT && SYSVIPC
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/arm64/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"