ARM: remove zte zx platform

The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.

However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.

Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.

Thanks to Jun and Shawn for maintaining this platform over the past
five years.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 0 insertions, 918 deletions

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 9b1170658d60..f1173cd93594 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -29,4 +29,3 @@ subdir-y += synaptics
 subdir-y += ti
 subdir-y += toshiba
 subdir-y += xilinx
-subdir-y += zte
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
deleted file mode 100644
index 126896144bda..000000000000
--- a/arch/arm64/boot/dts/zte/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296718-pcbox.dtb
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
deleted file mode 100644
index cb2519ecd724..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718-evb.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2016 ZTE Corporation.
- * Copyright 2016 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "zx296718.dtsi"
-
-/ {
-	model = "ZTE zx296718 evaluation board";
-	compatible = "zte,zx296718-evb", "zte,zx296718";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	sound-spdif0 {
-		compatible = "audio-graph-card";
-		dais = <&spdif0_port>;
-	};
-
-	sound-i2s0 {
-		compatible = "audio-graph-card";
-		dais = <&i2s0_port>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&amplifier_pins>;
-		pa-gpios = <&bgpio4 0 GPIO_ACTIVE_HIGH>;
-		widgets = "Line", "Line Out Jack";
-		routing = "Amplifier", "LINEOUTL",
-			  "Amplifier", "LINEOUTR",
-			  "Line Out Jack", "Amplifier";
-	};
-};
-
-&aud96p22 {
-	port {
-		aud96p22_endpoint: endpoint {
-			remote-endpoint = <&i2s0_endpoint>;
-		};
-	};
-};
-
-&emmc {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-
-	port {
-		hdmi_endpoint: endpoint {
-			remote-endpoint = <&spdif0_endpoint>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-
-	i2s0_port: port {
-		i2s0_endpoint: endpoint {
-			remote-endpoint = <&aud96p22_endpoint>;
-			dai-format = "i2s";
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&pmm {
-	amplifier_pins: amplifier {
-		pins = "TSI3_DATA";
-		function = "BGPIO";
-	};
-};
-
-&sd1 {
-	status = "okay";
-};
-
-&spdif0 {
-	status = "okay";
-
-	spdif0_port: port {
-		spdif0_endpoint: endpoint {
-			remote-endpoint = <&hdmi_endpoint>;
-		};
-	};
-};
-
-&tvenc {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts b/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
deleted file mode 100644
index e02509f7082b..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718-pcbox.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- */
-
-/dts-v1/;
-#include "zx296718.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "ZTE ZX296718 PCBOX Board";
-	compatible = "zte,zx296718-pcbox", "zte,zx296718";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	a53_vdd0v9: regulator-a53 {
-		compatible = "pwm-regulator";
-		pwms = <&pwm 3 1250 PWM_POLARITY_INVERTED>;
-		regulator-name = "A53_VDD0V9";
-		regulator-min-microvolt = <855000>;
-		regulator-max-microvolt = <1183000>;
-		pwm-dutycycle-unit = <100>;
-		pwm-dutycycle-range = <0 100>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	sound-spdif0 {
-		compatible = "audio-graph-card";
-		dais = <&spdif0_port>;
-	};
-
-	sound-i2s0 {
-		compatible = "audio-graph-card";
-		dais = <&i2s0_port>;
-	};
-};
-
-&aud96p22 {
-	port {
-		aud96p22_endpoint: endpoint {
-			remote-endpoint = <&i2s0_endpoint>;
-		};
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&a53_vdd0v9>;
-};
-
-&emmc {
-	status = "okay";
-};
-
-&hdmi {
-	status = "disabled";
-
-	port {
-		hdmi_endpoint: endpoint {
-			remote-endpoint = <&spdif0_endpoint>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-
-	i2s0_port: port {
-		i2s0_endpoint: endpoint {
-			remote-endpoint = <&aud96p22_endpoint>;
-			dai-format = "i2s";
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&irdec {
-	status = "okay";
-};
-
-&pmm {
-	pwm3_pins: pwm3 {
-		pins = "KEY_ROW2";
-		function = "PWM";
-	};
-
-	vga_pins: vga {
-		pins = "KEY_COL1", "KEY_COL2", "VGA_HS", "VGA_VS";
-		function = "VGA";
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_pins>;
-	status = "okay";
-};
-
-&sd0 {
-	status = "okay";
-};
-
-&sd1 {
-	status = "okay";
-};
-
-&spdif0 {
-	status = "okay";
-
-	spdif0_port: port {
-		spdif0_endpoint: endpoint {
-			remote-endpoint = <&hdmi_endpoint>;
-		};
-	};
-};
-
-&tvenc {
-	status = "disabled";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&vga {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vga_pins>;
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
deleted file mode 100644
index cc54837ff4ba..000000000000
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ /dev/null
@@ -1,627 +0,0 @@
-/*
- * Copyright 2016 ZTE Corporation.
- * Copyright 2016 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/zx296718-clock.h>
-
-/ {
-	compatible = "zte,zx296718";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		gpio0 = &bgpio0;
-		gpio1 = &bgpio1;
-		gpio2 = &bgpio2;
-		gpio3 = &bgpio3;
-		gpio4 = &bgpio4;
-		gpio5 = &bgpio5;
-		gpio6 = &bgpio6;
-		serial0 = &uart0;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&cpu0>;
-				};
-				core1 {
-					cpu = <&cpu1>;
-				};
-				core2 {
-					cpu = <&cpu2>;
-				};
-				core3 {
-					cpu = <&cpu3>;
-				};
-			};
-		};
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-			clocks = <&topcrm A53_GATE>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-	};
-
-	cluster0_opp: opp-table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <866000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-648000000 {
-			opp-hz = /bits/ 64 <648000000>;
-			opp-microvolt = <866000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <888000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <898000>;
-			clock-latency-ns = <500000>;
-		};
-
-		opp-1188000000 {
-			opp-hz = /bits/ 64 <1188000000>;
-			opp-microvolt = <1015000>;
-			clock-latency-ns = <500000>;
-		};
-	};
-
-	clk24k: clk-24k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000>;
-		clock-output-names = "rtcclk";
-	};
-
-	osc32k: clk-osc32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32000>;
-		clock-output-names = "osc32k";
-	};
-
-	osc12m: clk-osc12m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-		clock-output-names = "osc12m";
-	};
-
-	osc24m: clk-osc24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc24m";
-	};
-
-	osc25m: clk-osc25m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "osc25m";
-	};
-
-	osc60m: clk-osc60m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <60000000>;
-		clock-output-names = "osc60m";
-	};
-
-	osc99m: clk-osc99m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <99000000>;
-		clock-output-names = "osc99m";
-	};
-
-	osc125m: clk-osc125m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "osc125m";
-	};
-
-	osc198m: clk-osc198m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <198000000>;
-		clock-output-names = "osc198m";
-	};
-
-	pll_audio: clk-pll-884m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <884000000>;
-		clock-output-names = "pll_audio";
-	};
-
-	pll_ddr: clk-pll-932m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <932000000>;
-		clock-output-names = "pll_ddr";
-	};
-
-	pll_hsic: clk-pll-960m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <960000000>;
-		clock-output-names = "pll_hsic";
-	};
-
-	pll_mac: clk-pll-1000m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
-		clock-output-names = "pll_mac";
-	};
-
-	pll_mm0: clk-pll-1188m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1188000000>;
-		clock-output-names = "pll_mm0";
-	};
-
-	pll_mm1: clk-pll-1296m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1296000000>;
-		clock-output-names = "pll_mm1";
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	gic: interrupt-controller@2a00000 {
-		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x02a00000 0x10000>,
-		      <0x02b00000 0xc0000>;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		irdec: ir-decoder@111000 {
-			compatible = "zte,zx296718-irdec";
-			reg = <0x111000 0x1000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		aon_sysctrl: aon-sysctrl@116000 {
-			compatible = "zte,zx296718-aon-sysctrl", "syscon";
-			reg = <0x116000 0x1000>;
-		};
-
-		iocfg: pin-controller@119000 {
-			compatible = "zte,zx296718-iocfg";
-			reg = <0x119000 0x1000>;
-		};
-
-		uart0: uart@11f000 {
-			compatible = "arm,pl011", "arm,primecell";
-			arm,primecell-periphid = <0x001feffe>;
-			reg = <0x11f000 0x1000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc24m>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		sd0: mmc@1110000 {
-			compatible = "zte,zx296718-dw-mshc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x01110000 0x1000>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			fifo-depth = <32>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			bus-width = <4>;
-			clock-frequency = <50000000>;
-			clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <50000000>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-			status = "disabled";
-		};
-
-		sd1: mmc@1111000 {
-			compatible = "zte,zx296718-dw-mshc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x01111000 0x1000>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			fifo-depth = <32>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			bus-width = <4>;
-			clock-frequency = <167000000>;
-			clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <167000000>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			status = "disabled";
-		};
-
-		dma: dma-controller@1460000 {
-			compatible = "zte,zx296702-dma";
-			reg = <0x01460000 0x1000>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc24m>;
-			clock-names = "dmaclk";
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <32>;
-		};
-
-		lsp0crm: clock-controller@1420000 {
-			compatible = "zte,zx296718-lsp0crm";
-			reg = <0x01420000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		bgpio0: gpio@142d000 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d000 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 48 16>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio1: gpio@142d040 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d040 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 80 16>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio2: gpio@142d080 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d080 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 80 3
-				       &pmm 3 32 4
-				       &pmm 7 83 9>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio3: gpio@142d0c0 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d0c0 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 92 16>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio4: gpio@142d100 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d100 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 108 12
-				       &pmm 12 121 4>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio5: gpio@142d140 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d140 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 125 16>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		bgpio6: gpio@142d180 {
-			compatible = "zte,zx296718-gpio", "zte,zx296702-gpio";
-			reg = <0x142d180 0x40>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pmm 0 141 2>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		lsp1crm: clock-controller@1430000 {
-			compatible = "zte,zx296718-lsp1crm";
-			reg = <0x01430000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		pwm: pwm@1439000 {
-			compatible = "zte,zx296718-pwm";
-			reg = <0x1439000 0x1000>;
-			clocks = <&lsp1crm LSP1_PWM_PCLK>,
-				 <&lsp1crm LSP1_PWM_WCLK>;
-			clock-names = "pclk", "wclk";
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		vou: vou@1440000 {
-			compatible = "zte,zx296718-vou";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x1440000 0x10000>;
-
-			dpc: dpc@0 {
-				compatible = "zte,zx296718-dpc";
-				reg = <0x0000 0x1000>, <0x1000 0x1000>,
-				      <0x5000 0x1000>, <0x6000 0x1000>,
-				      <0xa000 0x1000>;
-				reg-names = "osd", "timing_ctrl",
-					    "dtrc", "vou_ctrl",
-					    "otfppu";
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
-					 <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
-				clock-names = "aclk", "ppu_wclk",
-					      "main_wclk", "aux_wclk";
-			};
-
-			vga: vga@8000 {
-				compatible = "zte,zx296718-vga";
-				reg = <0x8000 0x1000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&topcrm VGA_I2C_WCLK>;
-				clock-names = "i2c_wclk";
-				zte,vga-power-control = <&sysctrl 0x170 0xe0>;
-				status = "disabled";
-			};
-
-			hdmi: hdmi@c000 {
-				compatible = "zte,zx296718-hdmi";
-				reg = <0xc000 0x4000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&topcrm HDMI_OSC_CEC>,
-					 <&topcrm HDMI_OSC_CLK>,
-					 <&topcrm HDMI_XCLK>;
-				clock-names = "osc_cec", "osc_clk", "xclk";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			tvenc: tvenc@2000 {
-				compatible = "zte,zx296718-tvenc";
-				reg = <0x2000 0x1000>;
-				zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
-				status = "disabled";
-			};
-		};
-
-		topcrm: clock-controller@1461000 {
-			compatible = "zte,zx296718-topcrm";
-			reg = <0x01461000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		pmm: pin-controller@1462000 {
-			compatible = "zte,zx296718-pmm";
-			reg = <0x1462000 0x1000>;
-			zte,auxiliary-controller = <&iocfg>;
-		};
-
-		sysctrl: sysctrl@1463000 {
-			compatible = "zte,zx296718-sysctrl", "syscon";
-			reg = <0x1463000 0x1000>;
-		};
-
-		emmc: mmc@1470000{
-			compatible = "zte,zx296718-dw-mshc";
-			reg = <0x01470000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			zte,aon-syscon = <&aon_sysctrl>;
-			bus-width = <8>;
-			fifo-depth = <128>;
-			data-addr = <0x200>;
-			fifo-watermark-aligned;
-			clock-frequency = <167000000>;
-			clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>;
-			clock-names = "biu", "ciu";
-			max-frequency = <167000000>;
-			cap-mmc-highspeed;
-			mmc-ddr-1_8v;
-			mmc-hs200-1_8v;
-			non-removable;
-			disable-wp;
-			status = "disabled";
-		};
-
-		audiocrm: clock-controller@1480000 {
-			compatible = "zte,zx296718-audiocrm";
-			reg = <0x01480000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		i2s0: i2s@1482000 {
-			compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
-			reg = <0x01482000 0x1000>;
-			clocks = <&audiocrm AUDIO_I2S0_WCLK>,
-				 <&audiocrm AUDIO_I2S0_PCLK>;
-			clock-names = "wclk", "pclk";
-			assigned-clocks = <&audiocrm I2S0_WCLK_MUX>;
-			assigned-clock-parents = <&topcrm AUDIO_99M>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&dma 22>, <&dma 23>;
-			dma-names = "tx", "rx";
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@1486000 {
-			compatible = "zte,zx296718-i2c";
-			reg = <0x01486000 0x1000>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&audiocrm AUDIO_I2C0_WCLK>;
-			clock-frequency = <1600000>;
-			status = "disabled";
-
-			aud96p22: codec@22 {
-				compatible = "zte,zx-aud96p22";
-				#sound-dai-cells = <0>;
-				reg = <0x22>;
-			};
-		};
-
-		spdif0: spdif@1488000 {
-			compatible = "zte,zx296702-spdif";
-			reg = <0x1488000 0x1000>;
-			clocks = <&audiocrm AUDIO_SPDIF0_WCLK>;
-			clock-names = "tx";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			#sound-dai-cells = <0>;
-			dmas = <&dma 30>;
-			dma-names = "tx";
-			status = "disabled";
-		};
-	};
-};