diff options
| author | Arnd Bergmann | 2023-04-14 18:00:39 +0200 |
|---|---|---|
| committer | Arnd Bergmann | 2023-04-14 18:01:50 +0200 |
| commit | 718acce6f05df397092da870f3e77dfc12ac196c (patch) | |
| tree | 17a0a91dc88a7f0136b7deeed7822d9171419f76 /arch/arm64 | |
| parent | 8158597fd0ecfacce8d9e42fb23e1adb1e6adad8 (diff) | |
| parent | 8d58a8c0d930c52dd30bd50af24b786d55509cbf (diff) | |
Merge tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
More Qualcomm ARM64 Devicetree updated for v6.4
Devicetree for the QCM2210/QCM2290 is introduced. Support for the RB1
board is introduced on QRB2210, RB2 on QRB4210, the AL02 board on
IPQ9574, the MI01.6 board is introduced on IPQ5332 and initial support
for Xiaomi Mi A3 is introduced on SM6125.
Support for the output-enable/disable flag is introduced in the
pinctrl-msm driver, and the non-standard "input-enable" is dropped from
a range of platforms.
A wide range of smaller fixes are introduced, based on Devicetree
validation.
MSM8953 gains LPASS, MPSS and Wireless subsystem support.
The iommus property is removed from PCIe nodes in all platforms, as the
only the child devices should be associated with iommu groups, through
the existing iommu-map property.
A few QUP instances are introduced on the IPQ5332 platform, and support
for the MI01.6 board is introduced.
The reserved-memory map on Huawei Nexus 6P is updated with the addition
of splash screen framebuffer memory and adjustment to the reserved
memory region overlapping the smem region.
Regulators are introduces for the SA8775P Ride platform.
A regulator is marked always-on, for correctness, on Trogdor. Pinconf
fixes are introduced to both sc7180 and sc7280 devices. A dedicated
reviewers list is added for boards relevant to the Chromebook engineers.
A set of pinconf fixes are introduced for sc8280xp, labels are
introduced for Soundwire nodes.
The sensor core remoteproc and FastRPC thereon, is introduce in SDM845
and enabled for OnePlus 6/6T and Shift Shift6mq.
RMTFS, remoteprocs, ath10k and ramoops is introduced for the Lenovo Tab
P11.
UFS support is introduced on SM6125.
SM8150 no longer defines the GPU to be in headless mode by default, GPU
speedbins are introduced.
GPU speedbins are introduced for SM8250 as well, as is support for
display on Xiaomi Mi Pad 5 Pro, with two different panels supported.
Soundwire controllers, ADSP audio codec macros and the Inline Crypto
Engine support is added to the SM8550 platform.
* tag 'qcom-arm64-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (85 commits)
arm64: dts: qcom: Add base qrb4210-rb2 board dts
arm64: dts: qcom: sm8550: add Soundwire controllers
arm64: dts: qcom: sm8250: Add GPU speedbin support
arm64: dts: qcom: sm8150: Add GPU speedbin support
arm64: dts: qcom: sm8150: Don't start Adreno in headless mode
arm64: dts: qcom: ipq5332: add support for the RDP468 variant
arm64: dts: qcom: sdm630: move DSI opp-table out of DSI node
arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFi
arm64: dts: qcom: sm6115p-j606f: Enable remoteprocs
arm64: dts: qcom: sm6115: Add RMTFS
arm64: dts: qcom: sm6115-j606f: Add ramoops node
arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config
arm64: dts: qcom: sm8550: Add the Inline Crypto Engine node
arm64: dts: MSM8953: Add lpass nodes
arm64: dts: MSM8953: Add mpss nodes
arm64: dts: MSM8953: Add wcnss nodes
arm64: dts: qcom: sm8350: remove superfluous "input-enable"
arm64: dts: qcom: sm8150: remove superfluous "input-enable"
arm64: dts: qcom: apq8016: remove superfluous "input-enable"
arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strength
...
Link: https://lore.kernel.org/r/20230414031550.2412379-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm64')
68 files changed, 4383 insertions, 197 deletions
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f6ff4024a60e..d42c59572ace 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -4,10 +4,12 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -71,6 +73,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb @@ -172,6 +176,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb @@ -184,7 +189,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb -dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 27ceaa94c8bd..59860a2223b8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -729,7 +729,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; @@ -770,7 +769,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts index 702013b867d7..3af1d5556950 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -28,6 +28,13 @@ status = "okay"; }; +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &sdhc { bus-width = <4>; max-frequency = <192000000>; @@ -50,6 +57,13 @@ /* PINCTRL */ &tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + sdc_default_state: sdc-default-state { clk-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts new file mode 100644 index 000000000000..3b6a5cb8bf07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP468 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; + compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 04ef80f267bf..12e0e179e139 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -134,6 +134,13 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5332-tlmm"; reg = <0x01000000 0x300000>; @@ -191,6 +198,16 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp1_uart0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -201,6 +218,48 @@ status = "disabled"; }; + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -233,6 +292,14 @@ }; }; + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + apcs_glb: mailbox@b111000 { compatible = "qcom,ipq5332-apcs-apps-global", "qcom,ipq6018-apcs-apps-global"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index fe37dcdc52c8..84e715aa4310 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -686,7 +686,8 @@ }; apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; + compatible = "qcom,ipq8074-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; clocks = <&a53pll>, <&xo>; clock-names = "pll", "xo"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file mode 100644 index 000000000000..2c8430197ec0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..3bb7435f5e7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 8433c9710b1c..978f0abcdf8f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -44,18 +44,21 @@ sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; + function = "gpio"; bias-disable; output-low; }; sim-en-pins { pins = "gpio1"; + function = "gpio"; bias-disable; output-low; }; sim-sel-pins { pins = "gpio2"; + function = "gpio"; bias-disable; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 684668170353..602cb188a635 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -6,6 +6,9 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h> / { @@ -326,6 +329,80 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + smp2p_wcnss_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_wcnss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smsm { compatible = "qcom,smsm"; @@ -340,6 +417,22 @@ #qcom,smem-state-cells = <1>; }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; soc: soc@0 { @@ -630,6 +723,37 @@ drive-strength = <2>; bias-disable; }; + + wcnss_pin_a: wcnss-active-state { + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { @@ -931,6 +1055,60 @@ #size-cells = <0>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,msm8953-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>, + <&rpmpd MSM8953_VDDMD>; + power-domain-names = "cx", "mx","mss"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_BCR>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "modem"; + }; + }; + usb3: usb@70f8800 { compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; reg = <0x070f8800 0x400>; @@ -1245,6 +1423,72 @@ status = "disabled"; }; + wcnss: remoteproc@a21b000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&smp2p_wcnss_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -1315,6 +1559,120 @@ status = "disabled"; }; }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 05929d7a1d23..1f0bd24a074a 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -1035,7 +1035,8 @@ }; apcs: mailbox@b011000 { - compatible = "qcom,msm8976-apcs-kpss-global", "syscon"; + compatible = "qcom,msm8976-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index cd77dcb55872..b8f2a01bcb96 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -60,11 +60,6 @@ reg = <0x0 0x05000000 0x0 0x1a00000>; no-map; }; - - reserved@6c00000 { - reg = <0x0 0x06c00000 0x0 0x400000>; - no-map; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 7b0f62144c3e..29e79ae0849d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -2,7 +2,7 @@ /* * Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -31,13 +31,18 @@ #size-cells = <2>; ranges; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x1000000>; + no-map; + }; + tzapp_mem: tzapp@4800000 { reg = <0 0x04800000 0 0x1900000>; no-map; }; - removed_region: reserved@6300000 { - reg = <0 0x06300000 0 0xD00000>; + reserved@6300000 { + reg = <0 0x06300000 0 0x700000>; no-map; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 26059f861250..9dbde79f26a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -481,7 +481,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 768fe2326933..2831966be960 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -228,6 +228,11 @@ reg = <0 0xc9400000 0 0x3f00000>; no-map; }; + + reserved@6c00000 { + reg = <0 0x06c00000 0 0x400000>; + no-map; + }; }; smd { @@ -840,7 +845,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; i2c5_default: i2c5-default-state { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 4661a556772e..2b35cb3f5292 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1552,7 +1552,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; blsp2_i2c1_default: blsp2-i2c1-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 8b71b1f8f300..b35e2d9f428c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -640,7 +640,6 @@ function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index ce03c7c239e5..062d56c42385 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -501,7 +501,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_int_active: ts-int-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 8e1c25b15f57..687e96068cb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -844,7 +844,6 @@ function = "gpio"; bias-pull-up; drive-strength = <2>; - input-enable; }; chat_cam_pwr_en: chat-cam-pwr-en-default-state { @@ -873,7 +872,6 @@ function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 7956b151c7a4..2444b87fddf7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -528,7 +528,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; mdss_dsi_active_state: mdss-dsi-active-state { @@ -620,7 +619,6 @@ function = "gpio"; drive-strength = <16>; bias-pull-up; - input-enable; }; ts_int_suspend_state: ts-int-suspend-state { @@ -642,7 +640,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 09b222f363c2..b150437a8355 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -2489,7 +2489,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,msm8998-apcs-hmss-global"; + compatible = "qcom,msm8998-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi new file mode 100644 index 000000000000..5f1d15db5c99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pm2250_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + bias-pull-up; + }; + + pm2250_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm2250_gpios: gpio@c000 { + compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm2250_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index e2a6b66d8847..f4fb1a92ab55 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,7 +41,7 @@ }; }; - pm8916_usbin: extcon@1300 { + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..ae5abc76bcc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 04c82d1624eb..10655401528e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -296,7 +296,6 @@ drive-strength = <2>; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 42fc33ab8b2e..eefed585738c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1302,7 +1302,8 @@ }; apcs_glb: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts new file mode 100644 index 000000000000..ef3616093289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +/dts-v1/; + +#include "qcm2290.dtsi" +#include "pm2250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB1"; + compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart0; + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm2250_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + non-removable; + supports-cqe; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; + pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; + pinctrl-names = "default", "sleep"; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + sd_det_in_on: sd-det-in-on-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_det_in_off: sd-det-in-off-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; + +/* UART connected to the Micro-USB port via a FTDI chip */ +&uart0 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts new file mode 100644 index 000000000000..dc80f0bca767 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRB4210 RB2"; + compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>; + vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>; + vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>; + vdd-l6-l8-supply = <&vreg_s5a_0p848>; + vdd-l9-l11-supply = <&vreg_s7a_2p04>; + vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>; + vdd-l12-l16-supply = <&vreg_s7a_2p04>; + vdd-l23-l24-supply = <&vph_pwr>; + + vreg_s5a_0p848: s5 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s6a_1p352: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a_2p04: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a_0p9: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_2p96: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a_0p6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a_1p256: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a_0p664: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a_3p128: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a_1p3: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + vreg_l18a_1p232: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + vreg_l19a_1p8: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a_1p8: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a_2p704: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + vreg_l22a_2p96: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a_2p96: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a_2p96>; + vqmmc-supply = <&vreg_l11a_1p8>; + no-sdio; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + vmmc-supply = <&vreg_l22a_2p96>; + vqmmc-supply = <&vreg_l5a_2p96>; + no-sdio; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, + <49 1>, <52 1>, <54 1>, + <56 3>, <61 2>, <64 1>, + <68 1>, <72 8>, <96 1>; +}; + +&uart4 { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index a0d2024a69df..f238a02a5448 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + #include "sa8775p.dtsi" #include "sa8775p-pmics.dtsi" @@ -25,6 +27,237 @@ }; }; +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + &i2c18 { clock-frequency = <400000>; pinctrl-0 = <&qup_i2c18_default>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index fcabbc6a897f..9f052270e090 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -349,7 +349,7 @@ &qspi { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; flash@0 { compatible = "jedec,spi-nor"; @@ -507,8 +507,11 @@ bias-disable; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ +&qspi_data0 { + bias-pull-up; +}; + +&qspi_data1 { bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 423630c4d02c..ca6920de7ea8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -424,8 +424,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -512,6 +513,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; }; pp1800_prox: @@ -1044,17 +1047,20 @@ ap_spi_fp: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { drive-strength = <8>; - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c2_default { @@ -1204,7 +1210,6 @@ ap_spi_fp: &spi10 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio94"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1227,7 +1232,6 @@ ap_spi_fp: &spi10 { bios_flash_wp_l: bios-flash-wp-l-state { pins = "gpio66"; function = "gpio"; - input-enable; bias-disable; }; @@ -1269,7 +1273,6 @@ ap_spi_fp: &spi10 { fp_to_ap_irq_l: fp-to-ap-irq-l-state { pins = "gpio4"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; @@ -1284,7 +1287,6 @@ ap_spi_fp: &spi10 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio42"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1333,12 +1335,27 @@ ap_spi_fp: &spi10 { p_sensor_int_l: p-sensor-int-l-state { pins = "gpio24"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio68"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + qup_uart3_sleep: qup-uart3-sleep-state { cts-pins { /* diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 3c799b564b64..ea1ffade1aa1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1543,12 +1543,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio64", "gpio65"; + qspi_data0: qspi-data0-state { + pins = "gpio64"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data1: qspi-data1-state { + pins = "gpio65"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { pins = "gpio66", "gpio67"; function = "qspi_data"; }; @@ -3413,7 +3418,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc7180-apss-shared"; + compatible = "qcom,sc7180-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0 0x17c00000 0 0x10000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 16fb20369c01..f562e4d2b655 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -60,8 +60,9 @@ */ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; spi_flash: flash@0 { compatible = "jedec,spi-nor"; @@ -85,3 +86,23 @@ iommus = <&apps_smmu 0x1c02 0x1>; }; }; + +/* PINCTRL - chrome-common pinctrl */ + +&tlmm { + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index b6137816f2f3..e651f633341f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -692,18 +692,22 @@ ap_ec_spi: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ drive-strength = <8>; }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls */ drive-strength = <8>; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls */ + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; /* External pulldown */ drive-strength = <8>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 3cfeb118d379..ebae545c587c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -82,14 +82,12 @@ ap_h1_spi: &spi14 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; - input-enable; bias-pull-up; }; h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio104"; function = "gpio"; - input-enable; bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 5dc9bee28e7f..c6dc200c00ce 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -636,16 +636,19 @@ }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls or external pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls or external pulldown */ +}; + +&qspi_data1 { + bias-pull-down; /* No external pulls or external pulldown */ }; &qup_uart5_tx { diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 0cdb16316021..31728f461422 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2140,8 +2140,6 @@ dma-coherent; - iommus = <&apps_smmu 0x1c80 0x1>; - iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -4355,12 +4353,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio12", "gpio13"; + qspi_data0: qspi-data0-state { + pins = "gpio12"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data23: qspi-data23-state { pins = "gpio16", "gpio17"; function = "qspi_data"; }; @@ -5182,20 +5185,20 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; reg = <0 0x17a00000 0 0x10000>, /* GICD */ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; msi-controller; #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 6b4e1541ee39..5b25d54b9591 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -870,7 +870,7 @@ pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -895,7 +895,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index a1db3cf80c47..bdcba719fc38 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -1428,7 +1428,7 @@ pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -1445,7 +1445,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 4c75da1bac2d..8fa9fbfe5d00 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -2515,7 +2515,6 @@ status = "disabled"; }; - /* RX */ swr1: soundwire-controller@3210000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03210000 0 0x2000>; @@ -2590,13 +2589,13 @@ status = "disabled"; }; - /* WSA */ swr0: soundwire-controller@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.6.0"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2618,12 +2617,11 @@ status = "disabled"; }; - /* TX */ swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; clocks = <&txmacro>; @@ -2728,7 +2726,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2746,7 +2743,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2762,7 +2758,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; @@ -2780,7 +2775,6 @@ function = "dmic2_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 8bdb36a63474..37e72b1c56dc 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -328,6 +328,25 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -1591,25 +1610,6 @@ status = "disabled"; - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-131250000 { - opp-hz = /bits/ 64 <131250000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-210000000 { - opp-hz = /bits/ 64 <210000000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-262500000 { - opp-hz = /bits/ 64 <262500000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2267,7 +2267,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,sdm660-apcs-hmss-global"; + compatible = "qcom,sdm660-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 59ad6a8403d2..d05c511718df 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -317,8 +317,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -993,16 +994,19 @@ ap_ts_i2c: &i2c14 { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c3_default { @@ -1153,14 +1157,12 @@ ap_ts_i2c: &i2c14 { bios_flash_wp_r_l: bios-flash-wp-r-l-state { pins = "gpio128"; function = "gpio"; - input-enable; bias-disable; }; ec_ap_int_l: ec-ap-int-l-state { pins = "gpio122"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1188,7 +1190,6 @@ ap_ts_i2c: &i2c14 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio129"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1234,6 +1235,22 @@ ap_ts_i2c: &i2c14 { output-high; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio90", "gpio91", "gpio92", "gpio95"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 0c268c560d37..5c384345c05d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -550,6 +550,11 @@ bias-disable; }; +&slpi_pas { + firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + status = "okay"; +}; + &sound { compatible = "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; @@ -773,7 +778,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; tri_state_key_default: tri-state-key-default-state { @@ -802,7 +806,6 @@ function = "mdp_vsync"; drive-strength = <2>; bias-disable; - input-enable; }; panel_esd_pin: panel-esd-state { @@ -810,17 +813,14 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; speaker_default: speaker-default-state { - mux { - pins = "gpio69"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - output-high; - }; + pins = "gpio69"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index b54e304abf71..0ad891348e0c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -572,6 +572,11 @@ status = "okay"; }; +&slpi_pas { + firmware-name = "qcom/sdm845/axolotl/slpi.mbn"; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; @@ -608,7 +613,6 @@ function = "gpio"; drive-strength = <8>; bias-pull-up; - input-enable; }; ts_int_suspend: ts-int-suspend-state { @@ -616,7 +620,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi index 0d7c37f39176..c15d48860646 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -80,7 +80,6 @@ pins = "gpio54"; function = "gpio"; - input-enable; bias-pull-down; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1b7fdbae6a2b..8ae0ffccaab2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -586,7 +586,6 @@ function = "gpio"; bias-pull-down; drive-strength = <16>; - input-enable; }; ts_reset_sleep: ts-reset-sleep-state { @@ -601,7 +600,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; sde_dsi_active: sde-dsi-active-state { @@ -712,7 +710,5 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; - - qcom,snoc-host-cap-skip-quirk; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index da4b200281d8..90424442bb4a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -876,6 +877,14 @@ size = <0 0x4000>; no-map; }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + reusable; + }; }; adsp_pas: remoteproc-adsp { @@ -2329,7 +2338,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1c10 0xf>; iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, <0x100 &apps_smmu 0x1c11 0x1>, <0x200 &apps_smmu 0x1c12 0x1>, @@ -2440,7 +2448,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c00 0xf>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>, <0x200 &apps_smmu 0x1c02 0x1>, @@ -2769,12 +2776,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio91", "gpio92"; + qspi_data0: qspi-data0-state { + pins = "gpio91"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio92"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data23: qspi-data23-state { pins = "gpio93", "gpio94"; function = "qspi_data"; }; @@ -3174,7 +3186,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_active: quat-mi2s-active-state { @@ -3190,7 +3201,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { @@ -3205,7 +3215,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { @@ -3220,7 +3229,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { @@ -3235,7 +3243,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { @@ -3325,6 +3332,59 @@ "gcc_gpu_gpll0_div_clk_src"; }; + slpi_pas: remoteproc@5c00000 { + compatible = "qcom,sdm845-slpi-pas"; + reg = <0 0x5c00000 0 0x4000>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + qcom,qmp = <&aoss_qmp>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA + QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@0 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0>; + }; + }; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 5c688cb6a7ce..1326c171fe72 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -606,7 +606,6 @@ pins = "gpio37"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -615,7 +614,6 @@ pins = "gpio125"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -624,7 +622,6 @@ pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -633,7 +630,6 @@ pins = "gpio124"; function = "gpio"; - input-enable; bias-disable; }; @@ -641,7 +637,6 @@ pins = "gpio95"; function = "gpio"; - input-enable; bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 2505c815c65a..631ca327e064 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,sm6115-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -290,6 +291,15 @@ reg = <0x0 0x60000000 0x0 0x3900000>; no-map; }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; }; rpm-glink { @@ -1241,7 +1251,7 @@ }; mdss_dsi0: dsi@5e94000 { - compatible = "qcom,dsi-ctrl-6g-qcm2290"; + compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; @@ -2244,7 +2254,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6115-apcs-hmss-global"; + compatible = "qcom,sm6115-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 10c9d338446c..ea3340d31110 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -52,6 +52,17 @@ wakeup-source; }; }; + + reserved-memory { + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + ecc-size = <16>; + }; + }; }; &dispcc { @@ -78,6 +89,21 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -289,6 +315,15 @@ status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l17>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + qcom,ath10k-calibration-variant = "Lenovo_P11"; + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index b22b3f9a910d..9f8a9ef398a2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -468,7 +468,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts new file mode 100644 index 000000000000..b1038eb8cebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Xiaomi Mi A3"; + compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <11 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1560 * 720 * 4)>; + width = <720>; + height = <1560>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; + + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "rf_pa0_therm"; + }; + + adc-chan@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + adc-chan@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "camera_flash_therm"; + }; + + adc-chan@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "emmc_ufs_therm"; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpios { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vccq2-supply = <&vreg_l11a>; + vcc-max-microamp = <600000>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14200>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index fd577eb705f8..9484752fb850 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -737,6 +737,70 @@ status = "disabled"; }; + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + freq-table-hz = <50000000 240000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + #reset-cells = <1>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + lanes-per-direction = <1>; + + iommus = <&apps_smmu 0x200 0x0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6125-qmp-ufs-phy"; + reg = <0x04807000 0xdb8>; + + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + #phy-cells = <0>; + + status = "disabled"; + }; + gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0x04a00000 0x60000>; @@ -1210,7 +1274,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6125-apcs-hmss-global"; + compatible = "qcom,sm6125-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0f111000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 2a3ad478892b..dddd6e44d280 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -367,7 +367,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 8f014a232526..c0200e7f3f74 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -359,6 +359,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 69024f7c7f10..b039773c4465 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -479,7 +479,6 @@ pins = "gpio42"; function = "gpio"; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index eff995a07ab7..34ec84916bdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -354,6 +354,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index c9c04ac9bfcd..2273fa571988 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -950,6 +950,17 @@ status = "disabled"; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; @@ -1848,7 +1859,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1d80 0x3f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1947,7 +1957,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x3f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -2155,15 +2164,7 @@ }; gpu: gpu@2c00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ - compatible = "qcom,adreno-640.1", - "qcom,adreno", - "amd,imageon"; - + compatible = "qcom,adreno-640.1", "qcom,adreno"; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2175,44 +2176,52 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 675 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x2>; }; opp-585000000 { opp-hz = /bits/ 64 <585000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x3>; }; opp-499200000 { opp-hz = /bits/ 64 <499200000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x3>; }; opp-427000000 { opp-hz = /bits/ 64 <427000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-345000000 { opp-hz = /bits/ 64 <345000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; }; }; }; @@ -4126,7 +4135,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sm8150-apss-shared"; + compatible = "qcom,sm8150-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index c96cc9c90a5f..2f22d348d45d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -625,7 +625,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ap2mdm_default: ap2mdm-default-state { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts new file mode 100644 index 000000000000..8b2ae39950ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (BOE)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-boe-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index fe7972347609..8af6a0120a50 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -3,9 +3,8 @@ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> */ -/dts-v1/; - #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" @@ -24,8 +23,6 @@ /delete-node/ &xbl_aop_mem; / { - model = "Xiaomi Mi Pad 5 Pro"; - compatible = "xiaomi,elish", "qcom,sm8250"; classis-type = "tablet"; /* required for bootloader to select correct board */ @@ -473,6 +470,76 @@ status = "okay"; }; +&dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + status = "okay"; +}; + +&dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &gmu { status = "okay"; }; @@ -537,6 +604,10 @@ }; }; +&mdss { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts new file mode 100644 index 000000000000..a4d5341495cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (CSOT)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-csot-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 4e7875f8786f..7bea916900e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -960,6 +960,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8250-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@19b { + reg = <0x19b 0x1>; + bits = <5 3>; + }; + }; + rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>; @@ -1877,7 +1889,6 @@ "tbu", "ddrss_sf_tbu"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1984,7 +1995,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2093,7 +2103,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2367,7 +2376,7 @@ swr2: soundwire-controller@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; - interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core"; status = "disabled"; @@ -2436,7 +2445,6 @@ pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2444,7 +2452,6 @@ pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; - input-enable; bias-pull-down; }; }; @@ -2460,7 +2467,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2478,7 +2484,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2523,7 +2528,6 @@ pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2531,7 +2535,6 @@ pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-bus-hold; }; @@ -2539,7 +2542,6 @@ pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-pull-down; }; }; @@ -2560,49 +2562,58 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 670 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-670000000 { opp-hz = /bits/ 64 <670000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0xa>; }; opp-587000000 { opp-hz = /bits/ 64 <587000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0xb>; }; opp-525000000 { opp-hz = /bits/ 64 <525000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0xf>; }; opp-490000000 { opp-hz = /bits/ 64 <490000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0xf>; }; opp-441600000 { opp-hz = /bits/ 64 <441600000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + opp-supported-hw = <0xf>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0xf>; }; opp-305000000 { opp-hz = /bits/ 64 <305000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0xf>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index 89382ad73133..7ae1eb0a7cce 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -877,7 +877,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc2_card_det_active: sd-card-det-active-state { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 8985a59602f9..ebcb481571c2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1532,7 +1532,6 @@ "aggre1", "aggre0"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1616,7 +1615,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 67538b5a557e..001fb2723fbb 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -754,7 +754,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; telec_pwr_en: telec-pwr-en-state { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index c59a922ce9f8..595533aeafc4 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1786,7 +1786,6 @@ "aggre0", "aggre1"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1899,7 +1898,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2135,13 +2133,13 @@ #sound-dai-cells = <1>; }; - /* WSA2 */ swr4: soundwire-controller@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsa2macro>; clock-names = "iface"; + label = "WSA2"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2250,13 +2248,13 @@ #sound-dai-cells = <1>; }; - /* WSA */ swr0: soundwire-controller@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2280,8 +2278,8 @@ swr2: soundwire-controller@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; clocks = <&vamacro>; @@ -3690,7 +3688,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -3706,7 +3703,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 7a1994bf4086..f110d6cc195d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -1698,7 +1698,6 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1400 0x7f>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1795,7 +1794,6 @@ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1480 0x7f>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; @@ -1927,9 +1925,18 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; + status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; @@ -1986,6 +1993,206 @@ }; }; + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa2_swr_active>; + #sound-dai-cells = <1>; + }; + + swr3: soundwire-controller@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <10>; + + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + #sound-dai-cells = <1>; + }; + + swr0: soundwire-controller@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + lpass_tlmm: pinctrl@6e80000 { compatible = "qcom,sm8550-lpass-lpi-pinctrl"; reg = <0 0x06e80000 0 0x20000>, @@ -1997,6 +2204,110 @@ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; }; lpass_lpiaon_noc: interconnect@7400000 { |