diff options
| author | Linus Torvalds | 2017-07-04 14:50:59 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2017-07-04 14:50:59 -0700 |
| commit | a9ceea26747dfd1879e7d836c5ce40bb8d6fc7e9 (patch) | |
| tree | b34b2d0562e8a28931da71486a84d72082a853c5 /arch/arm64 | |
| parent | e8547112910540afb71589ee807ae6a4259f9755 (diff) | |
| parent | ac548add22a7916b3f38bd46b73bccf0ba6ca4cf (diff) | |
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"Device-tree updates for arm64 platforms. For the first time I can
remember, this is actually larger than the corresponding branch for
32-bit platforms overall, though that has more individual changes.
A significant portion this time is due to added machine support:
- Initial support for the Realtek RTD1295 SoC, along with the Zidoo
X9S set-top-box
- Initial support for Actions Semi S900 and the Bubblegum-96
single-board-cёmputer.
- Rockchips support for the rk3399-Firefly single-board-computer gets
added, this one stands out for being relatively fast, affordable
and well₋supported, compared to many boards that only fall into one
or two of the above categories.
- Mediatek gains support for the mt6797 mobile-phone SoC platform and
corresponding evaluation board.
- Amlogic board support gets added for the NanoPi K2 and S905x
LibreTech CC single-board computers and the R-Box Pro set-top-box
- Allwinner board support gets added for the OrangePi Win, Orangepi
Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
and the SoPine system-on-module.
- Renesas board support for Salvator-XS and H3ULCB automotive
development systems.
- Socionext Uniphier board support for LD11-global and LD20-global,
whatever those may be.
- Broadcom adds support for the new Stingray communication processor
in its iProc family, along with two reference boards.
Other updates include:
- For the hisicon platform, support for Hi3660-Hikey960 gets extended
significantly.
- Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
arm64: dts: mediatek: don't include missing file
ARM64: dts: meson-gxl: Add Libre Technology CC support
dt-bindings: arm: amlogic: Add Libre Technology CC board
dt-bindings: add Libre Technology vendor prefix
arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
arm64: dts: zte: Use - instead of @ for DT OPP entries
arm64: dts: marvell: add gpio support for Armada 7K/8K
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
arm64: dts: marvell: use new binding for the system controller on cp110
arm64: dts: marvell: remove *-clock-output-names on cp110
arm64: dts: marvell: use new bindings for xor clocks on ap806
arm64: dts: marvell: mcbin: enable the mdio node
arm64: dts: Add Actions Semi S900 and Bubblegum-96
dt-bindings: Add vendor prefix for uCRobotics
arm64: dts: marvell: add xmdio nodes for 7k/8k
arm64: dts: marvell: add a comment on the cp110 slave node status
arm64: dts: marvell: remove cpm crypto nodes from dts files
arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
...
Diffstat (limited to 'arch/arm64')
152 files changed, 11020 insertions, 2337 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 080232b0270e..8e1951273fd7 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,3 +1,4 @@ +dts-dirs += actions dts-dirs += al dts-dirs += allwinner dts-dirs += altera @@ -14,6 +15,7 @@ dts-dirs += marvell dts-dirs += mediatek dts-dirs += nvidia dts-dirs += qcom +dts-dirs += realtek dts-dirs += renesas dts-dirs += rockchip dts-dirs += socionext diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile new file mode 100644 index 000000000000..62922d688ce3 --- /dev/null +++ b/arch/arm64/boot/dts/actions/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts new file mode 100644 index 000000000000..a0c3484dbd12 --- /dev/null +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "s900.dtsi" + +/ { + compatible = "ucrobotics,bubblegum-96", "actions,s900"; + model = "Bubblegum-96"; + + aliases { + serial5 = &uart5; + }; + + chosen { + stdout-path = "serial5:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&timer { + clocks = <&hosc>; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi new file mode 100644 index 000000000000..11406f6d3a6d --- /dev/null +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "actions,s900"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart5: serial@e012a000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart6: serial@e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer: timer@e0228000 { + compatible = "actions,s900-timer"; + reg = <0x0 0xe0228000 0x0 0x8000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer1"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 244e8b7565f9..108f12ce6d1d 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,6 +1,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 6872135d7f84..0d1f026d831a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -67,6 +67,14 @@ }; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -77,6 +85,13 @@ bias-pull-up; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts new file mode 100644 index 000000000000..5f8ff4017d45 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -0,0 +1,95 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Win/Win Plus"; + compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index 790d14daaa6a..24f1aac366d6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -46,5 +46,20 @@ model = "Pine64+"; compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; - /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ + /* TODO: Camera, touchscreen, etc. */ +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index c680ed385da3..08cda24ea194 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -52,6 +52,10 @@ aliases { serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -66,10 +70,23 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + phy-mode = "rmii"; + phy-handle = <&ext_rmii_phy1>; + status = "okay"; + +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -80,6 +97,13 @@ bias-pull-up; }; +&mdio { + ext_rmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -91,16 +115,49 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; +/* On Exp and Euler connectors */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +/* On Wifi/BT connector, with RTS/CTS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "disabled"; +}; + +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts new file mode 100644 index 000000000000..17eb1cc5bf6b --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -0,0 +1,126 @@ +/* + * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun50i-a64-pine64.dts, which is: + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64-sopine.dtsi" + +/ { + model = "SoPine with baseboard"; + compatible = "pine64,sopine-baseboard", "pine64,sopine", + "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc1v8: vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc1v8>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi new file mode 100644 index 000000000000..475518b031dd --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun50i-a64-pine64.dts, which is: + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun50i-a64.dtsi" + +/ { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + non-removable; + disable-wp; + bus-width = <4>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 166c9ef884dc..9d00622ce845 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -43,6 +43,7 @@ */ #include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/clock/sun8i-r-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/sun50i-a64-ccu.h> @@ -129,6 +130,12 @@ #size-cells = <1>; ranges; + syscon: syscon@1c00000 { + compatible = "allwinner,sun50i-a64-system-controller", + "syscon"; + reg = <0x01c00000 0x1000>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun50i-a64-mmc"; reg = <0x01c0f000 0x1000>; @@ -204,6 +211,28 @@ #phy-cells = <1>; }; + ehci0: usb@01c1a000 { + compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + ehci1: usb@01c1b000 { compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; @@ -281,6 +310,21 @@ bias-pull-up; }; + rmii_pins: rmii_pins { + pins = "PD10", "PD11", "PD13", "PD14", "PD17", + "PD18", "PD19", "PD20", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; + }; + + rgmii_pins: rgmii_pins { + pins = "PD8", "PD9", "PD10", "PD11", "PD12", + "PD13", "PD15", "PD16", "PD17", "PD18", + "PD19", "PD20", "PD21", "PD22", "PD23"; + function = "emac"; + drive-strength = <40>; + }; + uart0_pins_a: uart0@0 { pins = "PB8", "PB9"; function = "uart0"; @@ -295,6 +339,26 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + uart2_pins: uart2-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; + + uart3_pins: uart3-pins { + pins = "PD0", "PD1"; + function = "uart3"; + }; + + uart4_pins: uart4-pins { + pins = "PD2", "PD3"; + function = "uart4"; + }; + + uart4_rts_cts_pins: uart4-rts-cts-pins { + pins = "PD4", "PD5"; + function = "uart4"; + }; }; uart0: serial@1c28000 { @@ -303,8 +367,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 67>; - resets = <&ccu 46>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -314,8 +378,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 68>; - resets = <&ccu 47>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -325,8 +389,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 69>; - resets = <&ccu 48>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -336,8 +400,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 70>; - resets = <&ccu 49>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; @@ -347,8 +411,8 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 71>; - resets = <&ccu 50>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; @@ -356,8 +420,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 63>; - resets = <&ccu 42>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -367,8 +431,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 64>; - resets = <&ccu 43>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -378,11 +442,31 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 65>; - resets = <&ccu 44>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac: ethernet@1c30000 { + compatible = "allwinner,sun50i-a64-emac"; + syscon = <&syscon>; + reg = <0x01c30000 0x100>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; }; gic: interrupt-controller@1c81000 { @@ -417,12 +501,31 @@ compatible = "allwinner,sun50i-a64-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; + + r_rsb_pins: rsb@0 { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; + }; + + r_rsb: rsb@1f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 6>; + clock-frequency = <3000000>; + resets = <&r_ccu 2>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts new file mode 100644 index 000000000000..968908761194 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "FriendlyARM NanoPi NEO 2"; + compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A port's VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index dfecc17dcc92..a8296feee884 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -59,6 +59,7 @@ }; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -91,6 +92,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + reg_usb0_vbus: usb0-vbus { compatible = "regulator-fixed"; regulator-name = "usb0-vbus"; @@ -126,12 +137,28 @@ status = "okay"; }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; status = "okay"; }; +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts new file mode 100644 index 000000000000..d906b302cbcd --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> + * + * Based on sun50i-h5-orangepi-pc2.dts, which is: + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Xunlong Orange Pi Prime"; + compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + }; + + r-gpio-keys { + compatible = "gpio-keys"; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */ + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts new file mode 100644 index 000000000000..b6b7a561df8c --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Zero Plus2"; + compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index b9ad2db7398b..7a9f48c27b1f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb @@ -7,15 +8,17 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index a84e27622639..dc478d094c11 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -121,19 +121,42 @@ }; }; -/* This UART is brought out to the DB9 connector */ -&uart_AO { +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; }; +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -154,7 +177,7 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; @@ -198,32 +221,9 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -ðmac { - status = "okay"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { +/* This UART is brought out to the DB9 connector */ +&uart_AO { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 436b875060e7..35b8c88c3220 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -200,7 +200,7 @@ }; scpi_sensors: sensors { - compatible = "arm,scpi-sensors"; + compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; }; @@ -304,6 +304,15 @@ status = "disabled"; }; + spicc: spi@8d80 { + compatible = "amlogic,meson-gx-spicc"; + reg = <0x0 0x08d80 0x0 0x80>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts new file mode 100644 index 000000000000..fa462831ccaf --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -0,0 +1,291 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + stat { + label = "nanopi-k2:blue:stat"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + }; + + vdd_5v: regulator-vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vddio_ao18: regulator-vddio-ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_tf: regulator-vddio-tf { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_TF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + }; + + wifi_32k: wifi-32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi_32k>; + clock-names = "ext_clock"; + }; + + vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_ao18>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +/* SD */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_tf>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "disabled"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; + +/* DBG_UART */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* Bluetooth on AP6212 */ +&uart_A { + status = "disabled"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; +}; + +/* 40-pin CON1 */ +&uart_C { + status = "disabled"; + pinctrl-0 = <&uart_c_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&vdd_5v>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 87198eafb04b..a1078b3e1c76 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -165,10 +165,10 @@ }; }; -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -195,12 +195,32 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -260,28 +280,8 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { +&uart_AO { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 54a9c6a6b392..d147c853ab05 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -137,16 +137,6 @@ }; }; -&scpi_clocks { - status = "disabled"; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -172,6 +162,33 @@ }; }; +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + &pinctrl_aobus { gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", "USB HUB nRESET", "USB OTG Power En", @@ -223,55 +240,15 @@ ""; }; -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&gpio_ao { - /* - * WARNING: The USB Hub on the Odroid-C2 needs a reset signal - * to be turned high in order to be detected by the USB Controller - * This signal should be handled by a USB specific power sequence - * in order to reset the Hub when USB bus is powered down. - */ - usb-hub { - gpio-hog; - gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb-hub-reset"; - }; -}; - -&usb0_phy { - status = "okay"; - phy-supply = <&usb_otg_pwr>; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - &saradc { status = "okay"; vref-supply = <&vcc1v8>; }; +&scpi_clocks { + status = "disabled"; +}; + /* SD */ &sd_emmc_b { status = "okay"; @@ -309,3 +286,26 @@ vmmc-supply = <&vcc3v3>; vqmmc-supply = <&vcc1v8>; }; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 3c6c0b7f4187..d904deb1018c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -126,7 +126,7 @@ clock-names = "ext_clock"; }; - cvbs-connector { + cvbs_connector: cvbs-connector { compatible = "composite-video-connector"; port { @@ -148,34 +148,36 @@ }; }; -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; -&ir { +&hdmi_tx { status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; }; -&usb0_phy { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&usb1_phy { - status = "okay"; +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; -&usb0 { +&ir { status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; }; -&usb1 { +&pwm_ef { status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; }; /* Wireless SDIO Module */ @@ -198,7 +200,7 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; @@ -242,28 +244,26 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { +/* This UART is brought out to the DB9 connector */ +&uart_AO { status = "okay"; - pinctrl-0 = <&pwm_e_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; }; -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; }; -&hdmi_tx { +&usb1_phy { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; }; -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index aefa66dff72d..346753fb6324 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -111,18 +111,6 @@ }; }; -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -149,21 +137,18 @@ }; }; -&usb0_phy { - status = "okay"; - phy-supply = <&usb_vbus>; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { +&ir { status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; }; -&usb1 { +&pwm_ef { status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; }; /* Wireless SDIO Module */ @@ -186,7 +171,7 @@ vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_1v8>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; @@ -229,10 +214,25 @@ vmmcq-sumpply = <&vcc_1v8>; }; -&pwm_ef { +&uart_AO { status = "okay"; - pinctrl-0 = <&pwm_e_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index f057fb48fee5..1878ac2b2b83 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -59,10 +59,10 @@ panic-indicator; }; }; +}; - cvbs-connector { - status = "disabled"; - }; +&cvbs_connector { + status = "disabled"; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 743acb5f5d06..e76ac313fef9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -85,6 +85,34 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; }; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -113,6 +141,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 86105a69690a..17d3efdf1469 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -97,13 +97,6 @@ }; }; -ðmac { - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; -}; - &aobus { pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson-gxbb-aobus-pinctrl"; @@ -249,9 +242,119 @@ function = "spdif_out_ao"; }; }; + + ao_cec_pins: ao_cec { + mux { + groups = "ao_cec"; + function = "cec_ao"; + }; + }; + + ee_cec_pins: ee_cec { + mux { + groups = "ee_cec"; + function = "cec_ao"; + }; + }; + }; +}; + +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; + +&cbus { + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; +}; + +&hdmi_tx { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; }; }; +&hwrng { + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + &periphs { pinctrl_periphs: pinctrl@4b0 { compatible = "amlogic,meson-gxbb-periphs-pinctrl"; @@ -262,7 +365,7 @@ gpio: bank@4b0 { reg = <0x0 0x004b0 0x0 0x28>, <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, <0x0 0x00430 0x0 0x40>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; @@ -290,6 +393,22 @@ }; }; + spi_pins: spi { + mux { + groups = "spi_miso", + "spi_mosi", + "spi_sclk"; + function = "spi"; + }; + }; + + spi_ss0_pins: spi-ss0 { + mux { + groups = "spi_ss0"; + function = "spi"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -521,67 +640,6 @@ }; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; - }; -}; - -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ - }; -}; - -&i2c_A { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_AO { - clocks = <&clkc CLKID_AO_I2C>; -}; - -&i2c_B { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_C { - clocks = <&clkc CLKID_I2C>; -}; - &saradc { compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, @@ -613,6 +671,13 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spicc { + clocks = <&clkc CLKID_SPICC>; + clock-names = "core"; + resets = <&reset RESET_PERIPHS_SPICC>; + num-cs = <1>; +}; + &spifc { clocks = <&clkc CLKID_SPI>; }; @@ -620,20 +685,3 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; - -&hwrng { - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index f9fbfdad8dde..3e0c023d6abd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -84,6 +84,17 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* P230 has exclusive choice between internal or external PHY */ @@ -113,6 +124,19 @@ }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao18>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 3c8b0b51ef27..72c5a9f64ca8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -54,6 +54,29 @@ linux,default-trigger = "default-on"; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; &i2c_A { @@ -95,7 +118,7 @@ }; &sd_emmc_a { - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts new file mode 100644 index 000000000000..890821d6e52b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2017 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Author: Jerome Brunet <jbrunet@baylibre.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x-p212.dtsi" + +/ { + compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Libre Technology CC"; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + system { + label = "librecomputer:system-status"; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + panic-indicator; + }; + + blue { + label = "librecomputer:blue"; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* + * The following devices exists but are exposed on the general + * purpose GPIO header. End user may well decide to use those pins + * for another purpose + */ + +&sd_emmc_a { + status = "disabled"; +}; + +&uart_A { + status = "disabled"; +}; + +&wifi32k { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 8873c058fad2..6633a5d8fdd3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -140,10 +140,10 @@ }; }; -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -152,12 +152,32 @@ phy-handle = <&internal_phy>; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -217,28 +237,8 @@ vqmmc-supply = <&vddio_boot>; }; -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { +&uart_AO { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index db31e093f40e..6ab17c1eeefd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -58,6 +58,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &cvbs_vdac_port { @@ -66,6 +77,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi index 0f78d836edaf..3314a0b3dad9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi @@ -48,7 +48,7 @@ compatible = "amlogic,s905x", "amlogic,meson-gxl"; }; -/* S905X Only has access to its internal PHY */ +/* S905X only has access to its internal PHY */ ðmac { phy-mode = "rmii"; phy-handle = <&internal_phy>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d8e096dff10a..8d4f3160a0ee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -190,9 +190,59 @@ function = "spdif_out_ao"; }; }; + + ao_cec_pins: ao_cec { + mux { + groups = "ao_cec"; + function = "cec_ao"; + }; + }; + + ee_cec_pins: ee_cec { + mux { + groups = "ee_cec"; + function = "cec_ao"; + }; + }; }; }; +&hdmi_tx { + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + &periphs { pinctrl_periphs: pinctrl@4b0 { compatible = "amlogic,meson-gxl-periphs-pinctrl"; @@ -203,12 +253,12 @@ gpio: bank@4b0 { reg = <0x0 0x004b0 0x0 0x28>, <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, + <0x0 0x00520 0x0 0x14>, <0x0 0x00430 0x0 0x40>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 14 101>; + gpio-ranges = <&pinctrl_periphs 0 10 101>; }; emmc_pins: emmc { @@ -231,6 +281,22 @@ }; }; + spi_pins: spi { + mux { + groups = "spi_miso", + "spi_mosi", + "spi_sclk"; + function = "spi"; + }; + }; + + spi_ss0_pins: spi-ss0 { + mux { + groups = "spi_ss0"; + function = "spi"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -354,6 +420,20 @@ }; }; + eth_link_led_pins: eth_link_led { + mux { + groups = "eth_link_led"; + function = "eth_led"; + }; + }; + + eth_act_led_pins: eth_act_led { + mux { + groups = "eth_act_led"; + function = "eth_led"; + }; + }; + pwm_a_pins: pwm_a { mux { groups = "pwm_a"; @@ -501,30 +581,6 @@ }; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; - }; -}; - -&i2c_A { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_AO { - clocks = <&clkc CLKID_AO_I2C>; -}; - -&i2c_B { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_C { - clocks = <&clkc CLKID_I2C>; -}; - &saradc { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, @@ -556,6 +612,13 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spicc { + clocks = <&clkc CLKID_SPICC>; + clock-names = "core"; + resets = <&reset RESET_PERIPHS_SPICC>; + num-cs = <1>; +}; + &spifc { clocks = <&clkc CLKID_SPI>; }; @@ -563,15 +626,3 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; - -&hdmi_tx { - compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 11b0bf46a95c..5f626d683088 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -113,11 +113,49 @@ }; }; -/* This UART is brought out to the DB9 connector */ -&uart_AO { +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; + + pinctrl-0 = <ð_pins>; pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; }; &ir { @@ -164,47 +202,8 @@ vqmmc-supply = <&vddio_boot>; }; -ðmac { - status = "okay"; - - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - - /* Select external PHY by default */ - phy-handle = <&external_phy>; - - amlogic,tx-delay-ns = <2>; - - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - - /* External PHY is in RGMII */ - phy-mode = "rgmii"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; - reg = <0>; - max-speed = <1000>; - }; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { +&uart_AO { status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts new file mode 100644 index 000000000000..08f1dd69b679 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -0,0 +1,240 @@ +/* + * Copyright (c) 2016-2017 Andreas Färber + * + * Based on nexbox-a1: + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" + +/ { + compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm"; + model = "R-Box Pro"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "rbox-pro:blue:on"; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + red { + label = "rbox-pro:red:standby"; + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + retain-state-suspended; + panic-indicator; + }; + }; + + vddio_boot: regulator-vddio-boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + amlogic,tx-delay-ns = <2>; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: brcmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index bfe7d683a42e..e8b7413ec890 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -53,7 +53,6 @@ #global-interrupts = <1>; dma-coherent; power-domains = <&scpi_devpd 0>; - status = "disabled"; }; gic: interrupt-controller@2c010000 { @@ -202,6 +201,15 @@ }; }; + cpu_debug0: cpu_debug@22010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm0: etm@22040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x22040000 0 0x1000>; @@ -252,6 +260,15 @@ }; }; + cpu_debug1: cpu_debug@22110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x22110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm1: etm@22140000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x22140000 0 0x1000>; @@ -266,6 +283,15 @@ }; }; + cpu_debug2: cpu_debug@23010000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23010000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm2: etm@23040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x23040000 0 0x1000>; @@ -330,6 +356,15 @@ }; }; + cpu_debug3: cpu_debug@23110000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23110000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm3: etm@23140000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x23140000 0 0x1000>; @@ -344,6 +379,15 @@ }; }; + cpu_debug4: cpu_debug@23210000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23210000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm4: etm@23240000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x23240000 0 0x1000>; @@ -358,6 +402,15 @@ }; }; + cpu_debug5: cpu_debug@23310000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x0 0x23310000 0x0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + }; + etm5: etm@23340000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x23340000 0 0x1000>; @@ -546,7 +599,6 @@ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; #global-interrupts = <1>; - status = "disabled"; }; smmu_hdlcd0: iommu@7fb20000 { @@ -556,7 +608,6 @@ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; #global-interrupts = <1>; - status = "disabled"; }; smmu_usb: iommu@7fb30000 { @@ -567,7 +618,6 @@ #iommu-cells = <1>; #global-interrupts = <1>; dma-coherent; - status = "disabled"; }; dma@7ff00000 { diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 0e8943ab94d7..aed6389468c4 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -281,3 +281,27 @@ &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; + +&cpu_debug0 { + cpu = <&A57_0>; +}; + +&cpu_debug1 { + cpu = <&A57_1>; +}; + +&cpu_debug2 { + cpu = <&A53_0>; +}; + +&cpu_debug3 { + cpu = <&A53_1>; +}; + +&cpu_debug4 { + cpu = <&A53_2>; +}; + +&cpu_debug5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 405e2fba025b..b39b6d6ec5aa 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -281,3 +281,27 @@ &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; + +&cpu_debug0 { + cpu = <&A72_0>; +}; + +&cpu_debug1 { + cpu = <&A72_1>; +}; + +&cpu_debug2 { + cpu = <&A53_0>; +}; + +&cpu_debug3 { + cpu = <&A53_1>; +}; + +&cpu_debug4 { + cpu = <&A53_2>; +}; + +&cpu_debug5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 0220494c9b80..c9236c4b967d 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -268,3 +268,27 @@ }; }; }; + +&cpu_debug0 { + cpu = <&A57_0>; +}; + +&cpu_debug1 { + cpu = <&A57_1>; +}; + +&cpu_debug2 { + cpu = <&A53_0>; +}; + +&cpu_debug3 { + cpu = <&A53_1>; +}; + +&cpu_debug4 { + cpu = <&A53_2>; +}; + +&cpu_debug5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index bfa8f8e4c5af..f11bdd6689ea 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb +dts-dirs := stingray always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index c309633a1e87..972f14db28ac 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -22,3 +22,20 @@ &uart1 { status = "okay"; }; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi index 19f2fe620a21..2d5de6f0f78d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi @@ -75,6 +75,10 @@ interrupts = <8>; }; +&cpu_thermal { + coefficients = <(-538) 412000>; +}; + /* enable thermal sensor with the correct compatible property set */ &thermal { compatible = "brcm,bcm2837-thermal"; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 35a309ae3ed8..35c8457e3d1f 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -460,6 +460,20 @@ }; }; + usbdrd_phy: phy@66000960 { + #phy-cells = <0>; + compatible = "brcm,ns2-drd-phy"; + reg = <0x66000960 0x24>, + <0x67012800 0x4>, + <0x6501d148 0x4>, + <0x664d0700 0x4>; + reg-names = "icfg", "rst-ctrl", + "crmu-ctrl", "usb2-strap"; + id-gpios = <&gpio_g 30 0>; + vbus-gpios = <&gpio_g 31 0>; + status = "disabled"; + }; + pwm: pwm@66010000 { compatible = "brcm,iproc-pwm"; reg = <0x66010000 0x28>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile new file mode 100644 index 000000000000..f70028edad63 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi new file mode 100644 index 000000000000..5dca7d10253b --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -0,0 +1,131 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "stingray.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart1; + serial1 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + }; + + sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl { + compatible = "regulator-gpio"; + regulator-name = "sdio0_vddo_ctrl_reg"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pca9505 18 0>; + states = <3300000 0x0 + 1800000 0x1>; + }; + + sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl { + compatible = "regulator-gpio"; + regulator-name = "sdio1_vddo_ctrl_reg"; + regulator-type = "voltage"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pca9505 19 0>; + states = <3300000 0x0 + 1800000 0x1>; + }; +}; + +&memory { /* Default DRAM banks */ + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ +}; + +&uart1 { + status = "okay"; +}; + +&pwm { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9505: pca9505@20 { + compatible = "nxp,pca9505"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; +}; + +&i2c1 { + status = "okay"; + + pcf8574: pcf8574@20 { + compatible = "nxp,pcf8574a"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x27>; + }; +}; + +&nand { + status = "ok"; + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <16>; + brcm,nand-oob-sector-size = <16>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&sdio0 { + vqmmc-supply = <&sdio0_vddo_ctrl_reg>; + non-removable; + full-pwr-cycle; + status = "okay"; +}; + +&sdio1 { + vqmmc-supply = <&sdio1_vddo_ctrl_reg>; + full-pwr-cycle; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts new file mode 100644 index 000000000000..5671669ba348 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -0,0 +1,78 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm958742-base.dtsi" + +/ { + compatible = "brcm,bcm958742k", "brcm,stingray"; + model = "Stingray Combo SVK (BCM958742K)"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&ssp0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio_hsls 34 0>; + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ssp1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpio_hsls 96 0>; + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts new file mode 100644 index 000000000000..6ebe399fda6a --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -0,0 +1,40 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm958742-base.dtsi" + +/ { + compatible = "brcm,bcm958742t", "brcm,stingray"; + model = "Stingray SST100 (BCM958742T)"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi new file mode 100644 index 000000000000..cbc43376e25e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -0,0 +1,170 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/clock/bcm-sr.h> + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + crmu_ref25m: crmu_ref25m { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&osc>; + clock-div = <2>; + clock-mult = <1>; + }; + + genpll0: genpll0@0001d104 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll0"; + reg = <0x0001d104 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll0", "clk_125", "clk_scr", + "clk_250", "clk_pcie_axi", + "clk_paxc_axi_x2", + "clk_paxc_axi"; + }; + + genpll3: genpll3@0001d1e0 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll3"; + reg = <0x0001d1e0 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll3", "clk_hsls", + "clk_sdio"; + }; + + genpll4: genpll4@0001d214 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll4"; + reg = <0x0001d214 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll4", "clk_ccn", + "clk_tpiu_pll", "noc_clk", + "pll_chclk_fs4", + "clk_bridge_fscpu"; + }; + + genpll5: genpll5@0001d248 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll5"; + reg = <0x0001d248 0x32>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "genpll5", "fs4_hf_clk", + "crypto_ae_clk", "raid_ae_clk"; + }; + + lcpll0: lcpll0@0001d0c4 { + #clock-cells = <1>; + compatible = "brcm,sr-lcpll0"; + reg = <0x0001d0c4 0x3c>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll0", "clk_sata_refp", + "clk_sata_refn", "clk_sata_350", + "clk_sata_500"; + }; + + lcpll1: lcpll1@0001d138 { + #clock-cells = <1>; + compatible = "brcm,sr-lcpll1"; + reg = <0x0001d138 0x3c>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll1", "clk_wanpn", + "clk_usb_ref", + "timesync_evt_clk"; + }; + + hsls_clk: hsls_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 1>; + clock-div = <1>; + clock-mult = <1>; + }; + + hsls_div2_clk: hsls_div2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>; + clock-div = <2>; + clock-mult = <1>; + + }; + + hsls_div4_clk: hsls_div4_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsls_25m_clk: hsls_25m_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&crmu_ref25m>; + clock-div = <1>; + clock-mult = <1>; + }; + + hsls_25m_div2_clk: hsls_25m_div2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&hsls_25m_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + sdio0_clk: sdio0_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>; + clock-div = <1>; + clock-mult = <1>; + }; + + sdio1_clk: sdio1_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>; + clock-div = <1>; + clock-mult = <1>; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi new file mode 100644 index 000000000000..15214d05fec1 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -0,0 +1,345 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h> + + pinconf: pinconf@00140000 { + compatible = "pinconf-single"; + reg = <0x00140000 0x250>; + pinctrl-single,register-width = <32>; + + /* pinconf functions */ + }; + + pinmux: pinmux@0014029c { + compatible = "pinctrl-single"; + reg = <0x0014029c 0x250>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xf>; + pinctrl-single,gpio-range = < + &range 0 154 MODE_GPIO + >; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + /* pinctrl functions */ + tsio_pins: pinmux_gpio_14 { + pinctrl-single,pins = < + 0x038 MODE_NITRO /* tsio_0 */ + 0x03c MODE_NITRO /* tsio_1 */ + >; + }; + + nor_pins: pinmux_pnor_adv_n { + pinctrl-single,pins = < + 0x0ac MODE_PNOR /* nand_ce1_n */ + 0x0b0 MODE_PNOR /* nand_ce0_n */ + 0x0b4 MODE_PNOR /* nand_we_n */ + 0x0b8 MODE_PNOR /* nand_wp_n */ + 0x0bc MODE_PNOR /* nand_re_n */ + 0x0c0 MODE_PNOR /* nand_rdy_bsy_n */ + 0x0c4 MODE_PNOR /* nand_io0_0 */ + 0x0c8 MODE_PNOR /* nand_io1_0 */ + 0x0cc MODE_PNOR /* nand_io2_0 */ + 0x0d0 MODE_PNOR /* nand_io3_0 */ + 0x0d4 MODE_PNOR /* nand_io4_0 */ + 0x0d8 MODE_PNOR /* nand_io5_0 */ + 0x0dc MODE_PNOR /* nand_io6_0 */ + 0x0e0 MODE_PNOR /* nand_io7_0 */ + 0x0e4 MODE_PNOR /* nand_io8_0 */ + 0x0e8 MODE_PNOR /* nand_io9_0 */ + 0x0ec MODE_PNOR /* nand_io10_0 */ + 0x0f0 MODE_PNOR /* nand_io11_0 */ + 0x0f4 MODE_PNOR /* nand_io12_0 */ + 0x0f8 MODE_PNOR /* nand_io13_0 */ + 0x0fc MODE_PNOR /* nand_io14_0 */ + 0x100 MODE_PNOR /* nand_io15_0 */ + 0x104 MODE_PNOR /* nand_ale_0 */ + 0x108 MODE_PNOR /* nand_cle_0 */ + 0x040 MODE_PNOR /* pnor_adv_n */ + 0x044 MODE_PNOR /* pnor_baa_n */ + 0x048 MODE_PNOR /* pnor_bls_0_n */ + 0x04c MODE_PNOR /* pnor_bls_1_n */ + 0x050 MODE_PNOR /* pnor_cre */ + 0x054 MODE_PNOR /* pnor_cs_2_n */ + 0x058 MODE_PNOR /* pnor_cs_1_n */ + 0x05c MODE_PNOR /* pnor_cs_0_n */ + 0x060 MODE_PNOR /* pnor_we_n */ + 0x064 MODE_PNOR /* pnor_oe_n */ + 0x068 MODE_PNOR /* pnor_intr */ + 0x06c MODE_PNOR /* pnor_dat_0 */ + 0x070 MODE_PNOR /* pnor_dat_1 */ + 0x074 MODE_PNOR /* pnor_dat_2 */ + 0x078 MODE_PNOR /* pnor_dat_3 */ + 0x07c MODE_PNOR /* pnor_dat_4 */ + 0x080 MODE_PNOR /* pnor_dat_5 */ + 0x084 MODE_PNOR /* pnor_dat_6 */ + 0x088 MODE_PNOR /* pnor_dat_7 */ + 0x08c MODE_PNOR /* pnor_dat_8 */ + 0x090 MODE_PNOR /* pnor_dat_9 */ + 0x094 MODE_PNOR /* pnor_dat_10 */ + 0x098 MODE_PNOR /* pnor_dat_11 */ + 0x09c MODE_PNOR /* pnor_dat_12 */ + 0x0a0 MODE_PNOR /* pnor_dat_13 */ + 0x0a4 MODE_PNOR /* pnor_dat_14 */ + 0x0a8 MODE_PNOR /* pnor_dat_15 */ + >; + }; + + nand_pins: pinmux_nand_ce1_n { + pinctrl-single,pins = < + 0x0ac MODE_NAND /* nand_ce1_n */ + 0x0b0 MODE_NAND /* nand_ce0_n */ + 0x0b4 MODE_NAND /* nand_we_n */ + 0x0b8 MODE_NAND /* nand_wp_n */ + 0x0bc MODE_NAND /* nand_re_n */ + 0x0c0 MODE_NAND /* nand_rdy_bsy_n */ + 0x0c4 MODE_NAND /* nand_io0_0 */ + 0x0c8 MODE_NAND /* nand_io1_0 */ + 0x0cc MODE_NAND /* nand_io2_0 */ + 0x0d0 MODE_NAND /* nand_io3_0 */ + 0x0d4 MODE_NAND /* nand_io4_0 */ + 0x0d8 MODE_NAND /* nand_io5_0 */ + 0x0dc MODE_NAND /* nand_io6_0 */ + 0x0e0 MODE_NAND /* nand_io7_0 */ + 0x0e4 MODE_NAND /* nand_io8_0 */ + 0x0e8 MODE_NAND /* nand_io9_0 */ + 0x0ec MODE_NAND /* nand_io10_0 */ + 0x0f0 MODE_NAND /* nand_io11_0 */ + 0x0f4 MODE_NAND /* nand_io12_0 */ + 0x0f8 MODE_NAND /* nand_io13_0 */ + 0x0fc MODE_NAND /* nand_io14_0 */ + 0x100 MODE_NAND /* nand_io15_0 */ + 0x104 MODE_NAND /* nand_ale_0 */ + 0x108 MODE_NAND /* nand_cle_0 */ + >; + }; + + pwm0_pins: pinmux_pwm_0 { + pinctrl-single,pins = < + 0x10c MODE_NITRO + >; + }; + + pwm1_pins: pinmux_pwm_1 { + pinctrl-single,pins = < + 0x110 MODE_NITRO + >; + }; + + pwm2_pins: pinmux_pwm_2 { + pinctrl-single,pins = < + 0x114 MODE_NITRO + >; + }; + + pwm3_pins: pinmux_pwm_3 { + pinctrl-single,pins = < + 0x118 MODE_NITRO + >; + }; + + dbu_rxd_pins: pinmux_uart1_sin_nitro { + pinctrl-single,pins = < + 0x11c MODE_NITRO /* dbu_rxd */ + 0x120 MODE_NITRO /* dbu_txd */ + >; + }; + + uart1_pins: pinmux_uart1_sin_nand { + pinctrl-single,pins = < + 0x11c MODE_NAND /* uart1_sin */ + 0x120 MODE_NAND /* uart1_out */ + >; + }; + + uart2_pins: pinmux_uart2_sin { + pinctrl-single,pins = < + 0x124 MODE_NITRO /* uart2_sin */ + 0x128 MODE_NITRO /* uart2_out */ + >; + }; + + uart3_pins: pinmux_uart3_sin { + pinctrl-single,pins = < + 0x12c MODE_NITRO /* uart3_sin */ + 0x130 MODE_NITRO /* uart3_out */ + >; + }; + + i2s_pins: pinmux_i2s_bitclk { + pinctrl-single,pins = < + 0x134 MODE_NITRO /* i2s_bitclk */ + 0x138 MODE_NITRO /* i2s_sdout */ + 0x13c MODE_NITRO /* i2s_sdin */ + 0x140 MODE_NITRO /* i2s_ws */ + 0x144 MODE_NITRO /* i2s_mclk */ + 0x148 MODE_NITRO /* i2s_spdif_out */ + >; + }; + + qspi_pins: pinumx_qspi_hold_n { + pinctrl-single,pins = < + 0x14c MODE_NAND /* qspi_hold_n */ + 0x150 MODE_NAND /* qspi_wp_n */ + 0x154 MODE_NAND /* qspi_sck */ + 0x158 MODE_NAND /* qspi_cs_n */ + 0x15c MODE_NAND /* qspi_mosi */ + 0x160 MODE_NAND /* qspi_miso */ + >; + }; + + mdio_pins: pinumx_ext_mdio { + pinctrl-single,pins = < + 0x164 MODE_NITRO /* ext_mdio */ + 0x168 MODE_NITRO /* ext_mdc */ + >; + }; + + i2c0_pins: pinmux_i2c0_sda { + pinctrl-single,pins = < + 0x16c MODE_NITRO /* i2c0_sda */ + 0x170 MODE_NITRO /* i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_sda { + pinctrl-single,pins = < + 0x174 MODE_NITRO /* i2c1_sda */ + 0x178 MODE_NITRO /* i2c1_scl */ + >; + }; + + sdio0_pins: pinmux_sdio0_cd_l { + pinctrl-single,pins = < + 0x17c MODE_NITRO /* sdio0_cd_l */ + 0x180 MODE_NITRO /* sdio0_clk_sdcard */ + 0x184 MODE_NITRO /* sdio0_data0 */ + 0x188 MODE_NITRO /* sdio0_data1 */ + 0x18c MODE_NITRO /* sdio0_data2 */ + 0x190 MODE_NITRO /* sdio0_data3 */ + 0x194 MODE_NITRO /* sdio0_data4 */ + 0x198 MODE_NITRO /* sdio0_data5 */ + 0x19c MODE_NITRO /* sdio0_data6 */ + 0x1a0 MODE_NITRO /* sdio0_data7 */ + 0x1a4 MODE_NITRO /* sdio0_cmd */ + 0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */ + 0x1ac MODE_NITRO /* sdio0_led_on */ + 0x1b0 MODE_NITRO /* sdio0_wp */ + >; + }; + + sdio1_pins: pinmux_sdio1_cd_l { + pinctrl-single,pins = < + 0x1b4 MODE_NITRO /* sdio1_cd_l */ + 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */ + 0x1bc MODE_NITRO /* sdio1_data0 */ + 0x1c0 MODE_NITRO /* sdio1_data1 */ + 0x1c4 MODE_NITRO /* sdio1_data2 */ + 0x1c8 MODE_NITRO /* sdio1_data3 */ + 0x1cc MODE_NITRO /* sdio1_data4 */ + 0x1d0 MODE_NITRO /* sdio1_data5 */ + 0x1d4 MODE_NITRO /* sdio1_data6 */ + 0x1d8 MODE_NITRO /* sdio1_data7 */ + 0x1dc MODE_NITRO /* sdio1_cmd */ + 0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */ + 0x1e4 MODE_NITRO /* sdio1_led_on */ + 0x1e8 MODE_NITRO /* sdio1_wp */ + >; + }; + + spi0_pins: pinmux_spi0_sck_nand { + pinctrl-single,pins = < + 0x1ec MODE_NITRO /* spi0_sck */ + 0x1f0 MODE_NITRO /* spi0_rxd */ + 0x1f4 MODE_NITRO /* spi0_fss */ + 0x1f8 MODE_NITRO /* spi0_txd */ + >; + }; + + spi1_pins: pinmux_spi1_sck_nand { + pinctrl-single,pins = < + 0x1fc MODE_NITRO /* spi1_sck */ + 0x200 MODE_NITRO /* spi1_rxd */ + 0x204 MODE_NITRO /* spi1_fss */ + 0x208 MODE_NITRO /* spi1_txd */ + >; + }; + + nuart_pins: pinmux_uart0_sin_nitro { + pinctrl-single,pins = < + 0x20c MODE_NITRO /* nuart_rxd */ + 0x210 MODE_NITRO /* nuart_txd */ + >; + }; + + uart0_pins: pinumux_uart0_sin_nand { + pinctrl-single,pins = < + 0x20c MODE_NAND /* uart0_sin */ + 0x210 MODE_NAND /* uart0_out */ + 0x214 MODE_NAND /* uart0_rts */ + 0x218 MODE_NAND /* uart0_cts */ + 0x21c MODE_NAND /* uart0_dtr */ + 0x220 MODE_NAND /* uart0_dcd */ + 0x224 MODE_NAND /* uart0_dsr */ + 0x228 MODE_NAND /* uart0_ri */ + >; + }; + + drdu2_pins: pinmux_drdu2_overcurrent { + pinctrl-single,pins = < + 0x22c MODE_NITRO /* drdu2_overcurrent */ + 0x230 MODE_NITRO /* drdu2_vbus_ppc */ + 0x234 MODE_NITRO /* drdu2_vbus_present */ + 0x238 MODE_NITRO /* drdu2_id */ + >; + }; + + drdu3_pins: pinmux_drdu3_overcurrent { + pinctrl-single,pins = < + 0x23c MODE_NITRO /* drdu3_overcurrent */ + 0x240 MODE_NITRO /* drdu3_vbus_ppc */ + 0x244 MODE_NITRO /* drdu3_vbus_present */ + 0x248 MODE_NITRO /* drdu3_id */ + >; + }; + + usb3h_pins: pinmux_usb3h_overcurrent { + pinctrl-single,pins = < + 0x24c MODE_NITRO /* usb3h_overcurrent */ + 0x250 MODE_NITRO /* usb3h_vbus_ppc */ + >; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi new file mode 100644 index 000000000000..49933cf16c92 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -0,0 +1,460 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "brcm,stingray"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + cpu@001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&CLUSTER2_L2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "psci"; + next-level-cache = <&CLUSTER2_L2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&CLUSTER3_L2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "psci"; + next-level-cache = <&CLUSTER3_L2>; + }; + + CLUSTER0_L2: l2-cache@000 { + compatible = "cache"; + }; + + CLUSTER1_L2: l2-cache@100 { + compatible = "cache"; + }; + + CLUSTER2_L2: l2-cache@200 { + compatible = "cache"; + }; + + CLUSTER3_L2: l2-cache@300 { + compatible = "cache"; + }; + }; + + memory: memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + scr { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x61000000 0x05000000>; + + gic: interrupt-controller@02c00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x02c00000 0x010000>, /* GICD */ + <0x02e00000 0x600000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@63c20000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x02c20000 0x10000>; + }; + }; + + smmu: mmu@03000000 { + compatible = "arm,mmu-500"; + reg = <0x03000000 0x80000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <2>; + }; + }; + + crmu: crmu { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x66400000 0x100000>; + + #include "stingray-clock.dtsi" + + gpio_crmu: gpio@00024800 { + compatible = "brcm,iproc-gpio"; + reg = <0x00024800 0x4c>; + ngpios = <6>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + hsls { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x68900000 0x17700000>; + + #include "stingray-pinctrl.dtsi" + + pwm: pwm@00010000 { + compatible = "brcm,iproc-pwm"; + reg = <0x00010000 0x1000>; + clocks = <&crmu_ref25m>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c0: i2c@000b0000 { + compatible = "brcm,iproc-i2c"; + reg = <0x000b0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + + wdt0: watchdog@000c0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x000c0000 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; + clock-names = "wdogclk", "apb_pclk"; + }; + + gpio_hsls: gpio@000d0000 { + compatible = "brcm,iproc-gpio"; + reg = <0x000d0000 0x864>; + ngpios = <151>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinmux 0 0 16>, + <&pinmux 16 71 2>, + <&pinmux 18 131 8>, + <&pinmux 26 83 6>, + <&pinmux 32 123 4>, + <&pinmux 36 43 24>, + <&pinmux 60 89 2>, + <&pinmux 62 73 4>, + <&pinmux 66 95 28>, + <&pinmux 94 127 4>, + <&pinmux 98 139 10>, + <&pinmux 108 16 27>, + <&pinmux 135 77 6>, + <&pinmux 141 67 4>, + <&pinmux 145 149 6>, + <&pinmux 151 91 4>; + }; + + i2c1: i2c@000e0000 { + compatible = "brcm,iproc-i2c"; + reg = <0x000e0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; + + uart0: uart@00100000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x00100000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: uart@00110000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x00110000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: uart@00120000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x00120000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: uart@00130000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x00130000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ssp0: ssp@00180000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00180000 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; + clock-names = "spiclk", "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp1: ssp@00190000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00190000 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsls_div2_clk>, <&hsls_div2_clk>; + clock-names = "spiclk", "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hwrng: hwrng@00220000 { + compatible = "brcm,iproc-rng200"; + reg = <0x00220000 0x28>; + }; + + dma0: dma@00310000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x00310000 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&hsls_div2_clk>; + clock-names = "apb_pclk"; + iommus = <&smmu 0x6000 0x0000>; + }; + + nand: nand@00360000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x00360000 0x600>, + <0x0050a408 0x600>, + <0x00360f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + brcm,nand-has-wp; + status = "disabled"; + }; + + sdio0: sdhci@003f1000 { + compatible = "brcm,sdhci-iproc"; + reg = <0x003f1000 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&sdio0_clk>; + iommus = <&smmu 0x6002 0x0000>; + status = "disabled"; + }; + + sdio1: sdhci@003f2000 { + compatible = "brcm,sdhci-iproc"; + reg = <0x003f2000 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&sdio1_clk>; + iommus = <&smmu 0x6003 0x0000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 3ff95277a8ec..23191eb9397c 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -60,7 +60,6 @@ vci-supply = <&ldo28_reg>; reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; - te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index 17fae8112e4d..7286b1ebfd7a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -1,7 +1,7 @@ /* * Device Tree file for Freescale LS1012A Freedom Board. * - * Copyright 2016, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPLv2 or the X11 license, at your option. Note that this dual diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index e2a93d53d3d8..8c013b54db14 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -1,7 +1,7 @@ /* * Device Tree file for Freescale LS1012A QDS Board. * - * Copyright 2016, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPLv2 or the X11 license, at your option. Note that this dual @@ -97,6 +97,14 @@ status = "okay"; }; +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + &i2c0 { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index ed77f6b0937b..c1a119effa61 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -1,7 +1,7 @@ /* * Device Tree file for Freescale LS1012A RDB Board. * - * Copyright 2016, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPLv2 or the X11 license, at your option. Note that this dual @@ -54,6 +54,19 @@ status = "okay"; }; +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + status = "okay"; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index b497ac196ccc..b1554cbd2c54 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1012A family SoC. * - * Copyright 2016, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPLv2 or the X11 license, at your option. Note that this dual @@ -76,10 +76,17 @@ sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <100000000>; + clock-frequency = <125000000>; clock-output-names = "sysclk"; }; + coreclk: coreclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "coreclk"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ @@ -117,12 +124,37 @@ #size-cells = <2>; ranges; + esdhc0: esdhc@1560000 { + compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <0 62 0x4>; + clocks = <&clockgen 4 0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + status = "disabled"; + }; + scfg: scfg@1570000 { compatible = "fsl,ls1012a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; big-endian; }; + esdhc1: esdhc@1580000 { + compatible = "fsl,ls1012a-esdhc", "fsl,esdhc"; + reg = <0x0 0x1580000 0x0 0x10000>; + interrupts = <0 65 0x4>; + clocks = <&clockgen 4 0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + broken-cd; + bus-width = <4>; + status = "disabled"; + }; + crypto: crypto@1700000 { compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", "fsl,sec-v4.0"; @@ -223,7 +255,8 @@ compatible = "fsl,ls1012a-clockgen"; reg = <0x0 0x1ee1000 0x0 0x1000>; #clock-cells = <2>; - clocks = <&sysclk>; + clocks = <&sysclk &coreclk>; + clock-names = "sysclk", "coreclk"; }; tmu: tmu@1f00000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi new file mode 100644 index 000000000000..169e171407a6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -0,0 +1,45 @@ +/* + * QorIQ FMan v3 device tree nodes for ls1043 + * + * Copyright 2015-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&soc { + +/* include used FMan blocks */ +#include "qoriq-fman3-0.dtsi" +#include "qoriq-fman3-0-1g-0.dtsi" +#include "qoriq-fman3-0-1g-1.dtsi" +#include "qoriq-fman3-0-1g-2.dtsi" +#include "qoriq-fman3-0-1g-3.dtsi" +#include "qoriq-fman3-0-1g-4.dtsi" +#include "qoriq-fman3-0-1g-5.dtsi" +#include "qoriq-fman3-0-10g-0.dtsi" + +}; + +&fman0 { + /* these aliases provide the FMan ports mapping */ + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 0989d635b558..6341281485cf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * - * Copyright 2014-2015, Freescale Semiconductor + * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -181,3 +181,5 @@ reg = <0>; }; }; + +#include "fsl-ls1043-post.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index c37110bc1506..3dc0c8e9663d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * - * Copyright 2014-2015, Freescale Semiconductor + * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -75,11 +75,11 @@ reg = <0x4c>; }; eeprom@52 { - compatible = "at24,24c512"; + compatible = "atmel,24c512"; reg = <0x52>; }; eeprom@53 { - compatible = "at24,24c512"; + compatible = "atmel,24c512"; reg = <0x53>; }; rtc@68 { @@ -139,3 +139,76 @@ &duart1 { status = "okay"; }; + +#include "fsl-ls1043-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-txid"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-txid"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f0000 { /* 10GEC1 */ + phy-handle = <&aqr105_phy>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + qsgmii_phy1: ethernet-phy@4 { + reg = <0x4>; + }; + + qsgmii_phy2: ethernet-phy@5 { + reg = <0x5>; + }; + + qsgmii_phy3: ethernet-phy@6 { + reg = <0x6>; + }; + + qsgmii_phy4: ethernet-phy@7 { + reg = <0x7>; + }; + }; + + mdio@fd000 { + aqr105_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 132 4>; + reg = <0x1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 45cface08cbb..31fd77f82ced 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * - * Copyright 2014-2015, Freescale Semiconductor + * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -45,6 +45,7 @@ */ #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "fsl,ls1043a"; @@ -52,6 +53,17 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -106,6 +118,33 @@ /* DRAM space 1, size: 2GiB DRAM */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -152,7 +191,7 @@ interrupts = <1 9 0xf08>; }; - soc { + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -223,6 +262,7 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; + big-endian; interrupts = <0 43 0x4>; }; @@ -333,6 +373,28 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x0 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x0 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; @@ -688,3 +750,6 @@ }; }; + +#include "qoriq-qman-portals.dtsi" +#include "qoriq-bman-portals.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi new file mode 100644 index 000000000000..f5017dba0f17 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -0,0 +1,48 @@ +/* + * QorIQ FMan v3 device tree nodes for ls1046 + * + * Copyright 2015-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&soc { + +/* include used FMan blocks */ +#include "qoriq-fman3-0.dtsi" +#include "qoriq-fman3-0-1g-0.dtsi" +#include "qoriq-fman3-0-1g-1.dtsi" +#include "qoriq-fman3-0-1g-2.dtsi" +#include "qoriq-fman3-0-1g-3.dtsi" +#include "qoriq-fman3-0-1g-4.dtsi" +#include "qoriq-fman3-0-1g-5.dtsi" +#include "qoriq-fman3-0-10g-0.dtsi" +#include "qoriq-fman3-0-10g-1.dtsi" +}; + +&fman0 { + /* these aliases provide the FMan ports mapping */ + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 290e5b014414..434383bade0e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * - * Copyright 2016, Freescale Semiconductor, Inc. + * Copyright 2016 Freescale Semiconductor, Inc. * * Shaohui Xie <Shaohui.Xie@nxp.com> * @@ -210,3 +210,5 @@ reg = <0>; }; }; + +#include "fsl-ls1046-post.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index d1ccc000d05a..5dc2782e2a58 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * - * Copyright 2016, Freescale Semiconductor, Inc. + * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> * @@ -72,6 +72,14 @@ status = "okay"; }; +&esdhc { + mmc-hs200-1_8v; + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; +}; + &i2c0 { status = "okay"; @@ -148,3 +156,63 @@ reg = <1>; }; }; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy1>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* 10GEC1 */ + phy-handle = <&aqr106_phy>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* 10GEC2 */ + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmii_phy1: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmii_phy2: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + mdio@fd000 { + aqr106_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 131 4>; + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index f4b8b7edaf9d..dc1640be0345 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * - * Copyright 2016, Freescale Semiconductor, Inc. + * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu <mingkai.hu@nxp.com> * @@ -55,6 +55,15 @@ aliases { crypto = &crypto; + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; }; cpus { @@ -174,7 +183,7 @@ IRQ_TYPE_LEVEL_LOW)>; }; - soc { + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -190,6 +199,7 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; + big-endian; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; }; @@ -209,10 +219,10 @@ }; esdhc: esdhc@1560000 { - compatible = "fsl,esdhc"; + compatible = "fsl,ls1046a-esdhc", "fsl,esdhc"; reg = <0x0 0x1560000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <0>; + clocks = <&clockgen 2 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; big-endian; @@ -268,6 +278,30 @@ }; }; + qman: qman@1880000 { + compatible = "fsl,qman"; + reg = <0x0 0x1880000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&qman_fqd &qman_pfdr>; + + }; + + bman: bman@1890000 { + compatible = "fsl,bman"; + reg = <0x0 0x1890000 0x0 0x10000>; + interrupts = <0 45 0x4>; + memory-region = <&bman_fbpr>; + + }; + + qportals: qman-portals@500000000 { + ranges = <0x0 0x5 0x00000000 0x8000000>; + }; + + bportals: bman-portals@508000000 { + ranges = <0x0 0x5 0x08000000 0x8000000>; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; reg = <0x0 0x1ee0000 0x0 0x10000>; @@ -567,6 +601,7 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb1: usb@3000000 { @@ -575,6 +610,7 @@ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; usb2: usb@3100000 { @@ -583,6 +619,7 @@ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; sata: sata@3200000 { @@ -594,4 +631,34 @@ clocks = <&clockgen 4 1>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-dma-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x800000>; + alignment = <0 0x800000>; + no-map; + }; + + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; }; + +#include "qoriq-qman-portals.dtsi" +#include "qoriq-bman-portals.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 8c3cae530f8f..30128051d0c0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -110,6 +110,30 @@ }; }; +&ifc { + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + fpga: board-control@3,0 { + compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; + reg = <0x3 0x0 0x0000100>; + }; +}; + &duart0 { status = "okay"; }; @@ -118,6 +142,10 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8a04fbb25cb4..213abb72de93 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -94,6 +94,22 @@ }; }; +&ifc { + ranges = <0 0 0x5 0x30000000 0x00010000 + 2 0 0x5 0x20000000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + reg = <0x0 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + }; +}; + &duart0 { status = "okay"; }; @@ -102,6 +118,10 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 2946fd797121..c144d06a6e33 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -44,6 +44,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1088a"; @@ -61,6 +62,7 @@ compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -89,6 +91,7 @@ compatible = "arm,cortex-a53"; reg = <0x100>; clocks = <&clockgen 1 1>; + #cooling-cells = <2>; }; cpu5: cpu@101 { @@ -153,6 +156,91 @@ clocks = <&sysclk>; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + /* Calibration data group 2 */ + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + /* Calibration data group 3 */ + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + /* Calibration data group 4 */ + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -216,10 +304,6 @@ little-endian; #address-cells = <2>; #size-cells = <1>; - - ranges = <0 0 0x5 0x80000000 0x08000000 - 2 0 0x5 0x30000000 0x00010000 - 3 0 0x5 0x20000000 0x00010000>; status = "disabled"; }; @@ -263,11 +347,26 @@ status = "disabled"; }; + esdhc: esdhc@2140000 { + compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + sata: sata@3200000 { - compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + compatible = "fsl,ls1088a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 3>; + dma-coherent; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index c1e76dfca48e..ed209cd57283 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2080a QDS Board. * - * Copyright (C) 2015-17, Freescale Semiconductor + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 18ad19587311..67ec3f9c81a1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2080a RDB Board. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 290604b0a603..3ee718f0aaf8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,7 +1,7 @@ /* * Device Tree file for Freescale LS2080a software Simulator model * - * Copyright (C) 2014-2015, Freescale Semiconductor + * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Bhupesh Sharma <bhupesh.sharma@freescale.com> * diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 46a26c021421..d789c6814e6a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * - * Copyright (C) 2014-2016, Freescale Semiconductor + * Copyright 2014-2016 Freescale Semiconductor, Inc. * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts index ebcd6ee4da0d..4a1df5ce3229 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2088A QDS Board. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index 5992dc130faa..a76d4b4debd1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2088A RDB Board. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index 33ce404cf7e4..5c695c658056 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 8b6204845973..b2374469a830 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2080A QDS Board. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * @@ -45,6 +46,7 @@ */ &esdhc { + mmc-hs200-1_8v; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 3737587ffb33..9a1d0d2ab1c3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -1,7 +1,8 @@ /* * Device Tree file for Freescale LS2080A RDB Board. * - * Copyright (C) 2016-17, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index abb2fff7d162..94cdd3045037 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -1,7 +1,8 @@ /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * - * Copyright (C) 2016-2017, Freescale Semiconductor + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * Abhimanyu Saini <abhimanyu.saini@nxp.com> * @@ -471,7 +472,7 @@ compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ - clock-frequency = <0>; /* Updated by bootloader */ + clocks = <&clockgen 4 1>; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi new file mode 100644 index 000000000000..c3c2be4f5072 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -0,0 +1,71 @@ +/* + * QorIQ BMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + /* + * bootloader fix-ups are expected to provide the + * "fsl,bman-portal-<hardware revision>" compatible + */ + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x4000000 0x4000>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x4010000 0x4000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x4020000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x4030000 0x4000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x4040000 0x4000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000>, <0x4050000 0x4000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000>, <0x4060000 0x4000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000>, <0x4070000 0x4000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + }; + + bman-portal@80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000>, <0x4080000 0x4000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 000000000000..ecdffe731b98 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + pcsphy-handle = <&pcsphy6>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 000000000000..a7f6af56b6a5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,42 @@ +/* + * QorIQ FMan v3 10g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + pcsphy-handle = <&pcsphy7>; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + + pcsphy7: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 000000000000..d600786719fb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #0 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + + pcsphy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 000000000000..3c0b76d43043 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #1 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy1>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + + pcsphy1: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 000000000000..89633afca26a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #2 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy2>; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + + pcsphy2: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 000000000000..87c2b705b1f9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy3>; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + + pcsphy3: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 000000000000..8f4d74b96b67 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #4 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + + pcsphy4: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 000000000000..d534f770f729 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ FMan v3 1g port #5 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy5>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + + pcsphy5: ethernet-phy@0 { + reg = <0x0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi new file mode 100644 index 000000000000..4dd06767f839 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -0,0 +1,81 @@ +/* + * QorIQ FMan v3 device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman0: fman@1a00000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0x0 0x0 0x1a00000 0x100000>; + reg = <0x0 0x1a00000 0x0 0x100000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi new file mode 100644 index 000000000000..2a9aa060efda --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -0,0 +1,80 @@ +/* + * QorIQ QMan Portals device tree + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + /* + * bootloader fix-ups are expected to provide the + * "fsl,bman-portal-<hardware revision>" compatible + */ + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x4000000 0x4000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <0>; + }; + + qportal1: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x4010000 0x4000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <1>; + }; + + qportal2: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x4020000 0x4000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <2>; + }; + + qportal3: qman-portal@30000 { + compatible = "fsl,qman-portal"; + reg = <0x30000 0x4000>, <0x4030000 0x4000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <3>; + }; + + qportal4: qman-portal@40000 { + compatible = "fsl,qman-portal"; + reg = <0x40000 0x4000>, <0x4040000 0x4000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <4>; + }; + + qportal5: qman-portal@50000 { + compatible = "fsl,qman-portal"; + reg = <0x50000 0x4000>, <0x4050000 0x4000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <5>; + }; + + qportal6: qman-portal@60000 { + compatible = "fsl,qman-portal"; + reg = <0x60000 0x4000>, <0x4060000 0x4000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <6>; + }; + + qportal7: qman-portal@70000 { + compatible = "fsl,qman-portal"; + reg = <0x70000 0x4000>, <0x4070000 0x4000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <7>; + }; + + qportal8: qman-portal@80000 { + compatible = "fsl,qman-portal"; + reg = <0x80000 0x4000>, <0x4080000 0x4000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 186251ffc6b2..6609b0fe7a8b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -9,17 +9,28 @@ #include "hi3660.dtsi" #include "hikey960-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "HiKey960"; - compatible = "hisilicon,hi3660"; + compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; aliases { - serial5 = &uart5; /* console UART */ + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; }; chosen { - stdout-path = "serial5:115200n8"; + stdout-path = "serial6:115200n8"; }; memory@0 { @@ -27,8 +38,206 @@ /* rewrite this at bootloader */ reg = <0x0 0x0 0x0 0x0>; }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; + + power { + wakeup-source; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "user_led1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "user_led2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "mmc0"; + }; + + user_led3 { + label = "user_led3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + default-state = "off"; + }; + + user_led4 { + label = "user_led4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + pmic: pmic@fff34000 { + compatible = "hisilicon,hi6421v530-pmic"; + reg = <0x0 0xfff34000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + ldo3: LDO3 { /* HDMI */ + regulator-name = "VOUT3_1V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo9: LDO9 { /* SDCARD I/O */ + regulator-name = "VOUT9_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo11: LDO11 { /* Low Speed Connector */ + regulator-name = "VOUT11_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo15: LDO15 { /* UFS VCC */ + regulator-name = "VOUT15_3V0"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo16: LDO16 { /* SD VDD */ + regulator-name = "VOUT16_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + }; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + adv7533: adv7533@39 { + status = "ok"; + compatible = "adi,adv7533"; + reg = <0x39>; + }; +}; + +&i2c7 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&uart3 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; + max-speed = <921600>; + }; }; -&uart5 { +&uart6 { + /* On Low speed expansion */ + label = "LS-UART1"; status = "okay"; }; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&spi3 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&dwmmc1 { + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + broken-cd; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + ti,non-removable; + non-removable; + #address-cells = <0x1>; + #size-cells = <0x0>; + status = "ok"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 3983086bd67b..c6a1961e8d55 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3660-clock.h> / { compatible = "hisilicon,hi3660"; @@ -141,19 +142,710 @@ #size-cells = <2>; ranges; - fixed_uart5: fixed_19_2M { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "fixed:uart5"; + crg_ctrl: crg_ctrl@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; }; - uart5: uart@fdf05000 { + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + + + pctrl: pctrl@e8a09000 { + compatible = "hisilicon,hi3660-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x2000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl@fff34000 { + compatible = "hisilicon,hi3660-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl@fff0a000 { + compatible = "hisilicon,hi3660-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + + }; + + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + dual_timer0: timer@fff14000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xfff14000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>, + <&crg_ctrl HI3660_OSC32K>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + i2c0: i2c@ffd71000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd71000 0x0 0x1000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>; + resets = <&iomcu_rst 0x20 3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@ffd72000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xffd72000 0x0 0x1000>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>; + resets = <&iomcu_rst 0x20 4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c3: i2c@fdf0c000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0c000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>; + resets = <&crg_rst 0x78 7>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>; + status = "disabled"; + }; + + i2c7: i2c@fdf0b000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xfdf0b000 0x0 0x1000>; + interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>; + resets = <&crg_rst 0x60 14>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>; + status = "disabled"; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + status = "disabled"; + }; + + uart1: serial@fdf00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf00000 0x0 0x1000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>, + <&crg_ctrl HI3660_CLK_GATE_UART1>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + status = "disabled"; + }; + + uart2: serial@fdf03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf03000 0x0 0x1000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + status = "disabled"; + }; + + uart3: serial@ffd74000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xffd74000 0x0 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_FACTOR_UART3>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; + }; + + uart4: serial@fdf01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf01000 0x0 0x1000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>, + <&crg_ctrl HI3660_CLK_GATE_UART4>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + status = "disabled"; + }; + + uart5: serial@fdf05000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&fixed_uart5 &fixed_uart5>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, + <&crg_ctrl HI3660_CLK_GATE_UART5>; + clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>; + status = "disabled"; + }; + + uart6: serial@fff32000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfff32000 0x0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_UART6>, + <&crg_ctrl HI3660_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>; + status = "disabled"; + }; + + rtc0: rtc@fff04000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x0 0Xfff04000 0x0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + }; + + gpio0: gpio@e8a0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0b000 0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 0 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e8a0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0c000 0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 1 7 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@e8a0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0d000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 14 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@e8a0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0e000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 22 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@e8a0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a0f000 0 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 30 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@e8a10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a10000 0 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 38 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@e8a11000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a11000 0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO6>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@e8a12000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a12000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO7>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@e8a13000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a13000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 62 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO8>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@e8a14000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a14000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 70 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO9>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@e8a15000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a15000 0 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 78 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO10>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@e8a16000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a16000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 86 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO11>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@e8a17000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a17000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO12>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@e8a18000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a18000 0 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 102 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO13>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@e8a19000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a19000 0 0x1000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 110 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO14>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@e8a1a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1a000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 118 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO15>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@e8a1b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1b000 0 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO16>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@e8a1c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1c000 0 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO17>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@ff3b4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b4000 0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO18>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@ff3b5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xff3b5000 0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx2 0 8 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO19>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@e8a1f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a1f000 0 0x1000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx1 0 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO20>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@e8a20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xe8a20000 0 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&pmx3 0 0 6>; + clocks = <&crg_ctrl HI3660_PCLK_GPIO21>; + clock-names = "apb_pclk"; + }; + + gpio22: gpio@fff0b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0b000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO176 */ + gpio-ranges = <&pmx4 2 0 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO0>; + clock-names = "apb_pclk"; + }; + + gpio23: gpio@fff0c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0c000 0 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO184 */ + gpio-ranges = <&pmx4 0 6 7>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO1>; + clock-names = "apb_pclk"; + }; + + gpio24: gpio@fff0d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0d000 0 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO192 */ + gpio-ranges = <&pmx4 0 13 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO2>; + clock-names = "apb_pclk"; + }; + + gpio25: gpio@fff0e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0e000 0 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO200 */ + gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO3>; + clock-names = "apb_pclk"; + }; + + gpio26: gpio@fff0f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff0f000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO208 */ + gpio-ranges = <&pmx4 0 28 8>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO4>; + clock-names = "apb_pclk"; + }; + + gpio27: gpio@fff10000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff10000 0 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + /* GPIO216 */ + gpio-ranges = <&pmx4 0 36 6>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO5>; + clock-names = "apb_pclk"; + }; + + gpio28: gpio@fff1d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0 0xfff1d000 0 0x1000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&sctrl HI3660_PCLK_AO_GPIO6>; + clock-names = "apb_pclk"; + }; + + spi2: spi@ffd68000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xffd68000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio27 2 0>; + status = "disabled"; + }; + + spi3: spi@ff3b3000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xff3b3000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pmx_func>; + num-cs = <1>; + cs-gpios = <&gpio18 5 0>; + status = "disabled"; + }; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0x1>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 + &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 + &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 + &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 + &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", + "pcie_apb_phy", "pcie_apb_sys", + "pcie_aclk"; + reset-gpios = <&gpio11 1 0 >; + }; + + /* SD */ + dwmmc1: dwmmc1@ff37f000 { + #address-cells = <1>; + #size-cells = <0>; + cd-inverted; + compatible = "hisilicon,hi3660-dw-mshc"; + num-slots = <1>; + bus-width = <0x4>; + disable-wp; + cap-sd-highspeed; + supports-highspeed; + card-detect-delay = <200>; + reg = <0x0 0xff37f000 0x0 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SD>, + <&crg_ctrl HI3660_HCLK_GATE_SD>; + clock-names = "ciu", "biu"; + clock-frequency = <3200000>; + resets = <&crg_rst 0x94 18>; + cd-gpios = <&gpio25 3 0>; + hisilicon,peripheral-syscon = <&sctrl>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "disabled"; + + slot@0 { + reg = <0x0>; + bus-width = <4>; + disable-wp; + }; + }; + + /* SDIO */ + dwmmc2: dwmmc2@ff3ff000 { + compatible = "hisilicon,hi3660-dw-mshc"; + reg = <0x0 0xff3ff000 0x0 0x1000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + num-slots = <1>; + clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>, + <&crg_ctrl HI3660_HCLK_GATE_SDIO0>; + clock-names = "ciu", "biu"; + resets = <&crg_rst 0x94 20>; + card-detect-delay = <200>; + supports-highspeed; + keep-power-in-suspend; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 49f6a6242cf9..afae4de6e53f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -466,6 +466,11 @@ method = "smc"; }; }; + + sound_card { + compatible = "audio-graph-card"; + dais = <&i2s0_port0>; + }; }; &uart2 { @@ -506,10 +511,33 @@ interrupts = <1 2>; pd-gpio = <&gpio0 4 0>; adi,dsi-lanes = <4>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + adv7533_in: endpoint { + remote-endpoint = <&dsi_out0>; + }; + }; + port@2 { + reg = <2>; + codec_endpoint: endpoint { + remote-endpoint = <&i2s0_cpu_endpoint>; + }; + }; + }; + }; +}; - port { - adv7533_in: endpoint { - remote-endpoint = <&dsi_out0>; +&i2s0 { + + ports { + i2s0_port0: port@0 { + i2s0_cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + dai-format = "i2s"; }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 6b82695ce32c..eacbe0db5bc2 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -332,6 +332,19 @@ status = "disabled"; }; + dma0: dma@f7370000 { + compatible = "hisilicon,k3-dma-1.0"; + reg = <0x0 0xf7370000 0x0 0x1000>; + #dma-cells = <1>; + dma-channels = <15>; + dma-requests = <32>; + interrupts = <0 84 4>; + clocks = <&sys_ctrl HI6220_EDMAC_ACLK>; + dma-no-cci; + dma-type = "hi6220_dma"; + status = "ok"; + }; + dual_timer0: timer@f8008000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x0 0xf8008000 0x0 0x1000>; @@ -805,6 +818,19 @@ #thermal-sensor-cells = <1>; }; + i2s0: i2s@f7118000{ + compatible = "hisilicon,hi6210-i2s"; + reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */ + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */ + clocks = <&sys_ctrl HI6220_DACODEC_PCLK>, + <&sys_ctrl HI6220_BBPPLL0_DIV>; + clock-names = "dacodec", "i2s-base"; + dmas = <&dma0 15 &dma0 14>; + dma-names = "rx", "tx"; + hisilicon,sysctrl-syscon = <&sys_ctrl>; + #sound-dai-cells = <1>; + }; + thermal-zones { cls0: cls0 { diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi index 719c4bc937a4..7e542d28dadb 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi @@ -24,6 +24,27 @@ &range 0 7 0 &range 8 116 0>; + pmu_pmx_func: pmu_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* PMU1_SSI */ + 0x00c MUX_M1 /* PMU2_SSI */ + 0x010 MUX_M1 /* PMU_CLKOUT */ + 0x100 MUX_M1 /* PMU_HKADC_SSI */ + >; + }; + + csi0_pwd_n_pmx_func: csi0_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M0 /* CSI0_PWD_N */ + >; + }; + + csi1_pwd_n_pmx_func: csi1_pwd_n_pmx_func { + pinctrl-single,pins = < + 0x04c MUX_M0 /* CSI1_PWD_N */ + >; + }; + isp0_pmx_func: isp0_pmx_func { pinctrl-single,pins = < 0x058 MUX_M1 /* ISP_CLK0 */ @@ -40,6 +61,12 @@ >; }; + pwr_key_pmx_func: pwr_key_pmx_func { + pinctrl-single,pins = < + 0x080 MUX_M0 /* GPIO_034 */ + >; + }; + i2c3_pmx_func: i2c3_pmx_func { pinctrl-single,pins = < 0x02c MUX_M1 /* I2C3_SCL */ @@ -67,21 +94,10 @@ >; }; - spi1_pmx_func: spi1_pmx_func { - pinctrl-single,pins = < - 0x034 MUX_M1 /* SPI1_CLK */ - 0x038 MUX_M1 /* SPI1_DI */ - 0x03c MUX_M1 /* SPI1_DO */ - 0x040 MUX_M1 /* SPI1_CS_N */ - >; - }; - uart0_pmx_func: uart0_pmx_func { pinctrl-single,pins = < 0x0cc MUX_M2 /* UART0_RXD */ 0x0d0 MUX_M2 /* UART0_TXD */ - 0x0d4 MUX_M2 /* UART0_RXD_M */ - 0x0d8 MUX_M2 /* UART0_TXD_M */ >; }; @@ -138,6 +154,18 @@ 0x0d8 MUX_M1 /* UART6_TXD */ >; }; + + cam0_rst_pmx_func: cam0_rst_pmx_func { + pinctrl-single,pins = < + 0x0c8 MUX_M0 /* CAM0_RST */ + >; + }; + + cam1_rst_pmx_func: cam1_rst_pmx_func { + pinctrl-single,pins = < + 0x124 MUX_M0 /* CAM1_RST */ + >; + }; }; /* [IOMG_MMC0_000, IOMG_MMC0_005] */ @@ -174,6 +202,13 @@ /* pin base, nr pins & gpio function */ pinctrl-single,gpio-range = <&range 0 12 0>; + ufs_pmx_func: ufs_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* UFS_REF_CLK */ + 0x004 MUX_M1 /* UFS_RST_N */ + >; + }; + spi3_pmx_func: spi3_pmx_func { pinctrl-single,pins = < 0x008 MUX_M1 /* SPI3_CLK */ @@ -248,17 +283,17 @@ >; }; - i2c2_pmx_func: i2c2_pmx_func { + i2c7_pmx_func: i2c7_pmx_func { pinctrl-single,pins = < - 0x024 MUX_M1 /* I2C2_SCL */ - 0x028 MUX_M1 /* I2C2_SDA */ + 0x024 MUX_M3 /* I2C7_SCL */ + 0x028 MUX_M3 /* I2C7_SDA */ >; }; - i2c7_pmx_func: i2c7_pmx_func { + pcie_pmx_func: pcie_pmx_func { pinctrl-single,pins = < - 0x024 MUX_M3 /* I2C7_SCL */ - 0x028 MUX_M3 /* I2C7_SDA */ + 0x084 MUX_M1 /* PCIE_CLKREQ_N */ + 0x088 MUX_M1 /* PCIE_WAKE_N */ >; }; @@ -271,15 +306,6 @@ >; }; - spi4_pmx_func: spi4_pmx_func { - pinctrl-single,pins = < - 0x08c MUX_M4 /* SPI4_CLK */ - 0x090 MUX_M4 /* SPI4_DI */ - 0x094 MUX_M4 /* SPI4_DO */ - 0x098 MUX_M4 /* SPI4_CS0_N */ - >; - }; - i2s0_pmx_func: i2s0_pmx_func { pinctrl-single,pins = < 0x034 MUX_M1 /* I2S0_DI */ @@ -290,13 +316,433 @@ }; }; - pmx5: pinmux@ff3fd800 { + pmx5: pinmux@e896c800 { + compatible = "pinconf-single"; + reg = <0x0 0xe896c800 0x0 0x200>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + pmu_cfg_func: pmu_cfg_func { + pinctrl-single,pins = < + 0x010 0x0 /* PMU1_SSI */ + 0x014 0x0 /* PMU2_SSI */ + 0x018 0x0 /* PMU_CLKOUT */ + 0x10c 0x0 /* PMU_HKADC_SSI */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_06MA DRIVE6_MASK + >; + }; + + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x038 0x0 /* I2C3_SCL */ + 0x03c 0x0 /* I2C3_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + csi0_pwd_n_cfg_func: csi0_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* CSI0_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + csi1_pwd_n_cfg_func: csi1_pwd_n_cfg_func { + pinctrl-single,pins = < + 0x058 0x0 /* CSI1_PWD_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + isp0_cfg_func: isp0_cfg_func { + pinctrl-single,pins = < + 0x064 0x0 /* ISP_CLK0 */ + 0x070 0x0 /* ISP_SCL0 */ + 0x074 0x0 /* ISP_SDA0 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK>; + }; + + isp1_cfg_func: isp1_cfg_func { + pinctrl-single,pins = < + 0x068 0x0 /* ISP_CLK1 */ + 0x078 0x0 /* ISP_SCL1 */ + 0x07c 0x0 /* ISP_SDA1 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + pwr_key_cfg_func: pwr_key_cfg_func { + pinctrl-single,pins = < + 0x08c 0x0 /* GPIO_034 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* UART1_RXD */ + 0x0b8 0x0 /* UART1_TXD */ + 0x0bc 0x0 /* UART1_CTS_N */ + 0x0c0 0x0 /* UART1_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART2_CTS_N */ + 0x0cc 0x0 /* UART2_RTS_N */ + 0x0d0 0x0 /* UART2_TXD */ + 0x0d4 0x0 /* UART2_RXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x0c8 0x0 /* UART5_RXD */ + 0x0cc 0x0 /* UART5_TXD */ + 0x0d0 0x0 /* UART5_CTS_N */ + 0x0d4 0x0 /* UART5_RTS_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam0_rst_cfg_func: cam0_rst_cfg_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* CAM0_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART0_RXD */ + 0x0dc 0x0 /* UART0_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart6_cfg_func: uart6_cfg_func { + pinctrl-single,pins = < + 0x0d8 0x0 /* UART6_CTS_N */ + 0x0dc 0x0 /* UART6_RTS_N */ + 0x0e0 0x0 /* UART6_RXD */ + 0x0e4 0x0 /* UART6_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x0e8 0x0 /* UART3_CTS_N */ + 0x0ec 0x0 /* UART3_RTS_N */ + 0x0f0 0x0 /* UART3_RXD */ + 0x0f4 0x0 /* UART3_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART4_CTS_N */ + 0x0fc 0x0 /* UART4_RTS_N */ + 0x100 0x0 /* UART4_RXD */ + 0x104 0x0 /* UART4_TXD */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + cam1_rst_cfg_func: cam1_rst_cfg_func { + pinctrl-single,pins = < + 0x130 0x0 /* CAM1_RST */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_04MA DRIVE6_MASK + >; + }; + }; + + pmx6: pinmux@ff3b6800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3b6800 0x0 0x18>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + ufs_cfg_func: ufs_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* UFS_REF_CLK */ + 0x004 0x0 /* UFS_RST_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_08MA DRIVE6_MASK + >; + }; + + spi3_cfg_func: spi3_cfg_func { + pinctrl-single,pins = < + 0x008 0x0 /* SPI3_CLK */ + 0x0 /* SPI3_DI */ + 0x010 0x0 /* SPI3_DO */ + 0x014 0x0 /* SPI3_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; + + pmx7: pinmux@ff3fd800 { compatible = "pinconf-single"; reg = <0x0 0xff3fd800 0x0 0x18>; #pinctrl-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - pinctrl-single,register-width = <32>; + pinctrl-single,register-width = <0x20>; sdio_clk_cfg_func: sdio_clk_cfg_func { pinctrl-single,pins = < @@ -315,8 +761,7 @@ PULL_UP >; pinctrl-single,drive-strength = < - DRIVE6_32MA - DRIVE6_MASK + DRIVE6_32MA DRIVE6_MASK >; }; @@ -341,19 +786,16 @@ PULL_UP >; pinctrl-single,drive-strength = < - DRIVE6_19MA - DRIVE6_MASK + DRIVE6_19MA DRIVE6_MASK >; }; }; - pmx6: pinmux@ff37e800 { + pmx8: pinmux@ff37e800 { compatible = "pinconf-single"; reg = <0x0 0xff37e800 0x0 0x18>; #pinctrl-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - pinctrl-single,register-width = <32>; + pinctrl-single,register-width = <0x20>; sd_clk_cfg_func: sd_clk_cfg_func { pinctrl-single,pins = < @@ -403,5 +845,215 @@ >; }; }; + + pmx9: pinmux@fff11800 { + compatible = "pinconf-single"; + reg = <0x0 0xfff11800 0x0 0xbc>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x01c 0x0 /* I2C0_SCL */ + 0x020 0x0 /* I2C0_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x024 0x0 /* I2C1_SCL */ + 0x028 0x0 /* I2C1_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2c7_cfg_func: i2c7_cfg_func { + pinctrl-single,pins = < + 0x02c 0x0 /* I2C7_SCL */ + 0x030 0x0 /* I2C7_SDA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + slimbus_cfg_func: slimbus_cfg_func { + pinctrl-single,pins = < + 0x034 0x0 /* SLIMBUS_CLK */ + 0x038 0x0 /* SLIMBUS_DATA */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s0_cfg_func: i2s0_cfg_func { + pinctrl-single,pins = < + 0x040 0x0 /* I2S0_DI */ + 0x044 0x0 /* I2S0_DO */ + 0x048 0x0 /* I2S0_XCLK */ + 0x04c 0x0 /* I2S0_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + i2s2_cfg_func: i2s2_cfg_func { + pinctrl-single,pins = < + 0x050 0x0 /* I2S2_DI */ + 0x054 0x0 /* I2S2_DO */ + 0x058 0x0 /* I2S2_XCLK */ + 0x05c 0x0 /* I2S2_XFS */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + pcie_cfg_func: pcie_cfg_func { + pinctrl-single,pins = < + 0x094 0x0 /* PCIE_CLKREQ_N */ + 0x098 0x0 /* PCIE_WAKE_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + spi2_cfg_func: spi2_cfg_func { + pinctrl-single,pins = < + 0x09c 0x0 /* SPI2_CLK */ + 0x0a0 0x0 /* SPI2_DI */ + 0x0a4 0x0 /* SPI2_DO */ + 0x0a8 0x0 /* SPI2_CS0_N */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + + usb_cfg_func: usb_cfg_func { + pinctrl-single,pins = < + 0x0ac 0x0 /* GPIO_219 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE7_02MA DRIVE6_MASK + >; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index a89855f57091..9df0f06ce607 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -42,6 +42,10 @@ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. + * + * This file is compatible with the version 1.4 and the version 2.0 of + * the board, however the CON numbers are different between the 2 + * version */ /dts-v1/; @@ -76,6 +80,36 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&exp_usb3_vbus>; }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* Gigabit module on CON19(V2.0)/CON21(V1.4) */ +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +/* Gigabit module on CON18(V2.0)/CON20(V1.4) */ +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; + status = "okay"; }; &i2c0 { @@ -108,11 +142,46 @@ }; }; +&mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ +&pcie0 { + status = "okay"; +}; + /* CON3 */ &sata { status = "okay"; }; +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +/* SD slot module on CON14(V2.0)/CON15(V1.4) */ +&sdhci1 { + wp-inverted; + cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + &spi0 { status = "okay"; pinctrl-names = "default"; @@ -145,60 +214,23 @@ }; }; -/* Exported on the micro USB connector CON32 through an FTDI */ +/* + * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through + * an FTDI + */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; status = "okay"; }; -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; +/* CON27(V2.0)/CON29(V1.4) */ +&usb2 { status = "okay"; }; -/* CON31 */ +/* CON29(V2.0)/CON31(V1.4) */ &usb3 { status = "okay"; usb-phy = <&usb3_phy>; }; - -/* CON17 (PCIe) / CON12 (mini-PCIe) */ -&pcie0 { - status = "okay"; -}; - -/* CON27 */ -&usb2 { - status = "okay"; -}; - - -&mdio { - status = "okay"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii-id"; - phy = <&phy0>; - status = "okay"; -}; - -ð1 { - phy-mode = "sgmii"; - phy = <&phy1>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 4d495ec39202..dbcc3d4e2ed5 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -75,14 +75,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; }; soc { @@ -163,7 +159,7 @@ pinctrl_nb: pinctrl@13800 { compatible = "marvell,armada3710-nb-pinctrl", - "syscon", "simple-mfd"; + "syscon", "simple-mfd"; reg = <0x13800 0x100>, <0x13C00 0x20>; gpionb: gpio { #gpio-cells = <2>; @@ -219,7 +215,7 @@ pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", - "syscon", "simple-mfd"; + "syscon", "simple-mfd"; reg = <0x18800 0x100>, <0x18C00 0x20>; gpiosb: gpio { #gpio-cells = <2>; @@ -281,8 +277,8 @@ xor@60900 { compatible = "marvell,armada-3700-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; + reg = <0x60900 0x100>, + <0x60b00 0x100>; xor10 { interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -292,11 +288,22 @@ }; }; + sdhci1: sdhci@d0000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd0000 0x300>, + <0x1e808 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + sdhci0: sdhci@d8000 { compatible = "marvell,armada-3700-sdhci", - "marvell,sdhci-xenon"; - reg = <0xd8000 0x300 - 0x17808 0x4>; + "marvell,sdhci-xenon"; + reg = <0xd8000 0x300>, + <0x17808 0x4>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&nb_periph_clk 0>; clock-names = "core"; diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi index 975e73302753..4ab012991d9d 100644 --- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi @@ -46,7 +46,7 @@ */ #include "armada-ap806-dual.dtsi" -#include "armada-cp110-master.dtsi" +#include "armada-70x0.dtsi" / { model = "Marvell Armada 7020"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 12442329b80f..92c761c380d3 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -162,6 +162,8 @@ }; &cpm_mdio { + status = "okay"; + phy0: ethernet-phy@0 { reg = <0>; }; @@ -185,7 +187,3 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; - -&cpm_crypto { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index 78d995d62707..cbe460b8fc00 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -46,7 +46,7 @@ */ #include "armada-ap806-quad.dtsi" -#include "armada-cp110-master.dtsi" +#include "armada-70x0.dtsi" / { model = "Marvell Armada 7040"; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi new file mode 100644 index 000000000000..860b6ae9dcc5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for the Armada 70x0 SoC + */ + +#include "armada-cp110-master.dtsi" + +/ { + aliases { + gpio1 = &cpm_gpio1; + gpio2 = &cpm_gpio2; + }; +}; + +&cpm_gpio1 { + status = "okay"; +}; + +&cpm_gpio2 { + status = "okay"; +}; + +&cpm_syscon0 { + cpm_pinctrl: pinctrl { + compatible = "marvell,armada-7k-pinctrl"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 7c08f1f28d9e..0ba0bc942598 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -46,8 +46,7 @@ */ #include "armada-ap806-dual.dtsi" -#include "armada-cp110-master.dtsi" -#include "armada-cp110-slave.dtsi" +#include "armada-80x0.dtsi" / { model = "Marvell Armada 8020"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index dc0d084005b2..1e8f7242ed6f 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -125,6 +125,8 @@ }; &cpm_mdio { + status = "okay"; + phy1: ethernet-phy@1 { reg = <1>; }; @@ -140,10 +142,6 @@ phy-mode = "rgmii-id"; }; -&cpm_crypto { - status = "okay"; -}; - /* CON5 on CP1 expansion */ &cps_pcie2 { status = "okay"; @@ -169,6 +167,24 @@ status = "okay"; }; +&cps_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cps_ethernet { + status = "okay"; +}; + +&cps_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + &ap_sdhci0 { status = "okay"; bus-width = <4>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index f7bb0cc03147..4968e731de61 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -95,16 +95,47 @@ status = "okay"; }; +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + &cpm_i2c0 { clock-frequency = <100000>; status = "okay"; }; +&cpm_mdio { + status = "okay"; + + ge_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + &cpm_sata0 { /* CPM Lane 0 - U29 */ status = "okay"; }; +&cpm_sdhci0 { + /* U6 */ + broken-cd; + bus-width = <4>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + &cpm_usb3_0 { /* J38? - USB2.0 only */ status = "okay"; @@ -115,6 +146,17 @@ status = "okay"; }; +&cps_ethernet { + status = "okay"; +}; + +&cps_eth1 { + /* CPS Lane 0 - J5 (Gigabit RJ45) */ + status = "okay"; + phy = <&ge_phy>; + phy-mode = "sgmii"; +}; + &cps_sata0 { /* CPS Lane 1 - U32 */ /* CPS Lane 3 - U31 */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 33813a75bc30..60fe84f5cbcc 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -46,8 +46,7 @@ */ #include "armada-ap806-quad.dtsi" -#include "armada-cp110-master.dtsi" -#include "armada-cp110-slave.dtsi" +#include "armada-80x0.dtsi" / { model = "Marvell Armada 8040"; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi new file mode 100644 index 000000000000..666ebe96ba0d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for the Armada 80x0 SoC family + */ + +#include "armada-cp110-master.dtsi" +#include "armada-cp110-slave.dtsi" + +/ { + aliases { + gpio1 = &cps_gpio1; + gpio2 = &cpm_gpio2; + }; +}; + +/* The 80x0 has two CP blocks, but uses only one block from each. */ +&cps_gpio1 { + status = "okay"; +}; + +&cpm_gpio2 { + status = "okay"; +}; + +&cpm_syscon0 { + cpm_pinctrl: pinctrl { + compatible = "marvell,armada-8k-cpm-pinctrl"; + }; +}; + +&cps_syscon0 { + cps_pinctrl: pinctrl { + compatible = "marvell,armada-8k-cps-pinctrl"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index fe41bf9c301e..1eb1f1e9aac4 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -57,6 +57,7 @@ aliases { serial0 = &uart0; serial1 = &uart1; + gpio0 = &ap_gpio; }; psci { @@ -146,6 +147,13 @@ marvell,spi-base = <128>, <136>, <144>, <152>; }; + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + pic: interrupt-controller@3f0100 { compatible = "marvell,armada-8k-pic"; reg = <0x3f0100 0x10>; @@ -159,6 +167,7 @@ reg = <0x400000 0x1000>, <0x410000 0x1000>; msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; dma-coherent; }; @@ -167,6 +176,7 @@ reg = <0x420000 0x1000>, <0x430000 0x1000>; msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; dma-coherent; }; @@ -175,6 +185,7 @@ reg = <0x440000 0x1000>, <0x450000 0x1000>; msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; dma-coherent; }; @@ -183,6 +194,7 @@ reg = <0x460000 0x1000>, <0x470000 0x1000>; msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; dma-coherent; }; @@ -193,7 +205,7 @@ #size-cells = <0>; cell-index = <0>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; }; @@ -204,7 +216,7 @@ #size-cells = <0>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; timeout-ms = <1000>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; }; @@ -214,7 +226,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; }; @@ -224,7 +236,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; - clocks = <&ap_syscon 3>; + clocks = <&ap_clk 3>; status = "disabled"; }; @@ -234,21 +246,33 @@ reg = <0x6e0000 0x300>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core"; - clocks = <&ap_syscon 4>; + clocks = <&ap_clk 4>; dma-coherent; marvell,xenon-phy-slow-mode; status = "disabled"; }; ap_syscon: system-controller@6f4000 { - compatible = "marvell,ap806-system-controller", - "syscon"; - #clock-cells = <1>; - clock-output-names = "ap-cpu-cluster-0", - "ap-cpu-cluster-1", - "ap-fixed", "ap-mss", - "ap-emmc"; + compatible = "syscon", "simple-mfd"; reg = <0x6f4000 0x1000>; + + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + }; + + ap_gpio: gpio { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <19>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 19>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index b4bc42ece754..726528ce54e9 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -44,45 +44,46 @@ * Device Tree file for Marvell Armada CP110 Master. */ +#define ICU_GRP_NSR 0x0 + / { cp110-master { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; - interrupt-parent = <&gic>; + interrupt-parent = <&cpm_icu>; ranges; config-space@f2000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf2000000 0x2000000>; cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; + clocks = <&cpm_clk 1 3>, <&cpm_clk 1 9>, <&cpm_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; status = "disabled"; dma-coherent; cpm_eth0: eth0 { - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; cpm_eth1: eth1 { - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; cpm_eth2: eth2 { - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -94,41 +95,70 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; + clocks = <&cpm_clk 1 9>, <&cpm_clk 1 5>; + status = "disabled"; + }; + + cpm_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + + cpm_icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x10>; + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; }; cpm_syscon0: system-controller@440000 { - compatible = "marvell,cp110-system-controller0", - "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x440000 0x1000>; - #clock-cells = <2>; - core-clock-output-names = - "cpm-apll", "cpm-ppv2-core", "cpm-eip", - "cpm-core", "cpm-nand-core"; - gate-clock-output-names = - "cpm-audio", "cpm-communit", "cpm-nand", - "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", - "cpm-mg-core", "cpm-xor1", "cpm-xor0", - "cpm-gop-dp", "none", "cpm-pcie_x10", - "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", - "cpm-sata", "cpm-sata-usb", "cpm-main", - "cpm-sd-mmc-gop", "none", "none", - "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", - "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; + + cpm_clk: clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + cpm_gpio1: gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cpm_pinctrl 0 0 32>; + status = "disabled"; + + }; + + cpm_gpio2: gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cpm_pinctrl 0 32 31>; + status = "disabled"; + }; }; cpm_rtc: rtc@284000 { compatible = "marvell,armada-8k-rtc"; reg = <0x284000 0x20>, <0x284080 0x24>; reg-names = "rtc", "rtc-soc"; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>; }; cpm_sata0: sata@540000 { compatible = "marvell,armada-8k-ahci", "generic-ahci"; reg = <0x540000 0x30000>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 15>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 15>; status = "disabled"; }; @@ -137,8 +167,8 @@ "generic-xhci"; reg = <0x500000 0x4000>; dma-coherent; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 22>; + interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 22>; status = "disabled"; }; @@ -147,8 +177,8 @@ "generic-xhci"; reg = <0x510000 0x4000>; dma-coherent; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 23>; + interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 23>; status = "disabled"; }; @@ -158,7 +188,7 @@ <0x6b0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&cpm_syscon0 1 8>; + clocks = <&cpm_clk 1 8>; }; cpm_xor1: xor@6c0000 { @@ -167,7 +197,7 @@ <0x6d0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&cpm_syscon0 1 7>; + clocks = <&cpm_clk 1 7>; }; cpm_spi0: spi@700600 { @@ -176,7 +206,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <1>; - clocks = <&cpm_syscon0 1 21>; + clocks = <&cpm_clk 1 21>; status = "disabled"; }; @@ -186,7 +216,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <2>; - clocks = <&cpm_syscon0 1 21>; + clocks = <&cpm_clk 1 21>; status = "disabled"; }; @@ -195,8 +225,8 @@ reg = <0x701000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 21>; + interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 21>; status = "disabled"; }; @@ -205,25 +235,25 @@ reg = <0x701100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 21>; + interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 21>; status = "disabled"; }; cpm_trng: trng@760000 { compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpm_syscon0 1 25>; + interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_clk 1 25>; status = "okay"; }; cpm_sdhci0: sdhci@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core"; - clocks = <&cpm_syscon0 1 4>; + clocks = <&cpm_clk 1 4>; dma-coherent; status = "disabled"; }; @@ -231,16 +261,15 @@ cpm_crypto: crypto@800000 { compatible = "inside-secure,safexcel-eip197"; reg = <0x800000 0x200000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; - clocks = <&cpm_syscon0 1 26>; - status = "disabled"; + clocks = <&cpm_clk 1 26>; }; }; @@ -263,10 +292,10 @@ /* non-prefetchable memory */ 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cpm_syscon0 1 13>; + clocks = <&cpm_clk 1 13>; status = "disabled"; }; @@ -289,11 +318,11 @@ /* non-prefetchable memory */ 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cpm_syscon0 1 11>; + clocks = <&cpm_clk 1 11>; status = "disabled"; }; @@ -316,11 +345,11 @@ /* non-prefetchable memory */ 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cpm_syscon0 1 12>; + clocks = <&cpm_clk 1 12>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 6e2058847ddc..95f8e5f607f6 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -44,19 +44,20 @@ * Device Tree file for Marvell Armada CP110 Slave. */ +#define ICU_GRP_NSR 0x0 + / { cp110-slave { #address-cells = <2>; #size-cells = <2>; compatible = "simple-bus"; - interrupt-parent = <&gic>; + interrupt-parent = <&cps_icu>; ranges; config-space@f4000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf4000000 0x2000000>; cps_rtc: rtc@284000 { @@ -69,27 +70,27 @@ cps_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; + clocks = <&cps_clk 1 3>, <&cps_clk 1 9>, <&cps_clk 1 5>; clock-names = "pp_clk", "gop_clk", "mg_clk"; status = "disabled"; dma-coherent; cps_eth0: eth0 { - interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; gop-port-id = <0>; status = "disabled"; }; cps_eth1: eth1 { - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; gop-port-id = <2>; status = "disabled"; }; cps_eth2: eth2 { - interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <2>; gop-port-id = <3>; status = "disabled"; @@ -101,34 +102,64 @@ #size-cells = <0>; compatible = "marvell,orion-mdio"; reg = <0x12a200 0x10>; + clocks = <&cps_clk 1 9>, <&cps_clk 1 5>; + status = "disabled"; + }; + + cps_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + + cps_icu: interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x10>; + #interrupt-cells = <3>; + interrupt-controller; + msi-parent = <&gicp>; }; cps_syscon0: system-controller@440000 { - compatible = "marvell,cp110-system-controller0", - "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x440000 0x1000>; - #clock-cells = <2>; - core-clock-output-names = - "cps-apll", "cps-ppv2-core", "cps-eip", - "cps-core", "cps-nand-core"; - gate-clock-output-names = - "cps-audio", "cps-communit", "cps-nand", - "cps-ppv2", "cps-sdio", "cps-mg-domain", - "cps-mg-core", "cps-xor1", "cps-xor0", - "cps-gop-dp", "none", "cps-pcie_x10", - "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor", - "cps-sata", "cps-sata-usb", "cps-main", - "cps-sd-mmc-gop", "none", "none", - "cps-slow-io", "cps-usb3h0", "cps-usb3h1", - "cps-usb3dev", "cps-eip150", "cps-eip197"; + + cps_clk: clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + cps_gpio1: gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cps_pinctrl 0 0 32>; + status = "disabled"; + + }; + + cps_gpio2: gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&cps_pinctrl 0 32 31>; + status = "disabled"; + }; + }; cps_sata0: sata@540000 { compatible = "marvell,armada-8k-ahci", "generic-ahci"; reg = <0x540000 0x30000>; - interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 15>; + interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 15>; status = "disabled"; }; @@ -137,8 +168,8 @@ "generic-xhci"; reg = <0x500000 0x4000>; dma-coherent; - interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 22>; + interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 22>; status = "disabled"; }; @@ -147,8 +178,8 @@ "generic-xhci"; reg = <0x510000 0x4000>; dma-coherent; - interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 23>; + interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 23>; status = "disabled"; }; @@ -158,7 +189,7 @@ <0x6b0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&cps_syscon0 1 8>; + clocks = <&cps_clk 1 8>; }; cps_xor1: xor@6c0000 { @@ -167,7 +198,7 @@ <0x6d0000 0x1000>; dma-coherent; msi-parent = <&gic_v2m0>; - clocks = <&cps_syscon0 1 7>; + clocks = <&cps_clk 1 7>; }; cps_spi0: spi@700600 { @@ -176,7 +207,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <3>; - clocks = <&cps_syscon0 1 21>; + clocks = <&cps_clk 1 21>; status = "disabled"; }; @@ -186,7 +217,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <4>; - clocks = <&cps_syscon0 1 21>; + clocks = <&cps_clk 1 21>; status = "disabled"; }; @@ -195,8 +226,8 @@ reg = <0x701000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 21>; + interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 21>; status = "disabled"; }; @@ -205,31 +236,38 @@ reg = <0x701100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 21>; + interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 21>; status = "disabled"; }; cps_trng: trng@760000 { compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; reg = <0x760000 0x7d>; - interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cps_syscon0 1 25>; + interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_clk 1 25>; status = "okay"; }; cps_crypto: crypto@800000 { compatible = "inside-secure,safexcel-eip197"; reg = <0x800000 0x200000>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>, + <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3", "eip"; - clocks = <&cps_syscon0 1 26>; + clocks = <&cps_clk 1 26>; + /* + * The cryptographic engine found on the cp110 + * master is enabled by default at the SoC + * level. Because it is not possible as of now + * to enable two cryptographic engines in + * parallel, disable this one by default. + */ status = "disabled"; }; }; @@ -253,10 +291,10 @@ /* non-prefetchable memory */ 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cps_syscon0 1 13>; + clocks = <&cps_clk 1 13>; status = "disabled"; }; @@ -279,11 +317,11 @@ /* non-prefetchable memory */ 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cps_syscon0 1 11>; + clocks = <&cps_clk 1 11>; status = "disabled"; }; @@ -306,11 +344,11 @@ /* non-prefetchable memory */ 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; - clocks = <&cps_syscon0 1 12>; + clocks = <&cps_clk 1 12>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 9fbfd3238469..015eb072ddef 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts new file mode 100644 index 000000000000..c79109c65409 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6797.dtsi" + +/ { + model = "MediaTek MT6797 Evaluation Board"; + compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x1e800000>; + }; + + chosen {}; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi new file mode 100644 index 000000000000..31088a9f71de --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi @@ -0,0 +1,244 @@ +/* + * Copyright (c) 2017 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/clock/mt6797-clk.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "mediatek,mt6797"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x001>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x002>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x003>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x100>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x101>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x102>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + enable-method = "psci"; + reg = <0x103>; + }; + + cpu8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x200>; + }; + + cpu9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x201>; + }; + }; + + clk26m: oscillator@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "clk32k"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + topckgen: topckgen@10000000 { + compatible = "mediatek,mt6797-topckgen"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infrasys: infracfg_ao@10001000 { + compatible = "mediatek,mt6797-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + scpsys: scpsys@10006000 { + compatible = "mediatek,mt6797-scpsys"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + clocks = <&topckgen CLK_TOP_MUX_MFG>, + <&topckgen CLK_TOP_MUX_MM>, + <&topckgen CLK_TOP_MUX_VDEC>; + clock-names = "mfg", "mm", "vdec"; + infracfg = <&infrasys>; + }; + + apmixedsys: apmixed@1000c000 { + compatible = "mediatek,mt6797-apmixedsys"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt6797-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10220620 0 0x20>, + <0 0x10220690 0 0x10>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt6797-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infrasys CLK_INFRA_UART0>, + <&infrasys CLK_INFRA_AP_DMA>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt6797-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infrasys CLK_INFRA_UART1>, + <&infrasys CLK_INFRA_AP_DMA>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt6797-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infrasys CLK_INFRA_UART2>, + <&infrasys CLK_INFRA_AP_DMA>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6797-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infrasys CLK_INFRA_UART3>, + <&infrasys CLK_INFRA_AP_DMA>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + mmsys: mmsys_config@14000000 { + compatible = "mediatek,mt6797-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: imgsys_config@15000000 { + compatible = "mediatek,mt6797-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: vdec_gcon@16000000 { + compatible = "mediatek,mt6797-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x10000>; + #clock-cells = <1>; + }; + + vencsys: venc_gcon@17000000 { + compatible = "mediatek,mt6797-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + gic: interrupt-controller@19000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + reg = <0 0x19000000 0 0x10000>, /* GICD */ + <0 0x19200000 0 0x200000>, /* GICR */ + <0 0x10240000 0 0x2000>; /* GICC */ + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 6922252f317b..b99a27372965 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -731,8 +731,9 @@ <0 0x11280700 0 0x0100>; reg-names = "mac", "ippc"; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>, + <&u2port1 PHY_TYPE_USB2>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, @@ -763,21 +764,31 @@ u3phy: usb-phy@11290000 { compatible = "mediatek,mt8173-u3phy"; reg = <0 0x11290000 0 0x800>; - clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; - clock-names = "u3phya_ref"; #address-cells = <2>; #size-cells = <2>; ranges; status = "okay"; - phy_port0: port@11290800 { - reg = <0 0x11290800 0 0x800>; + u2port0: usb-phy@11290800 { + reg = <0 0x11290800 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; - phy_port1: port@11291000 { - reg = <0 0x11291000 0 0x800>; + u3port0: usb-phy@11290900 { + reg = <0 0x11290900 0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + + u2port1: usb-phy@11291000 { + reg = <0 0x11291000 0 0x100>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "ref"; #phy-cells = <1>; status = "okay"; }; @@ -792,80 +803,74 @@ #clock-cells = <1>; }; - mdp { - compatible = "mediatek,mt8173-mdp"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma", + "mediatek,mt8173-mdp"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; + }; - mdp_rdma0: rdma@14001000 { - compatible = "mediatek,mt8173-mdp-rdma"; - reg = <0 0x14001000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,larb = <&larb0>; - }; - - mdp_rdma1: rdma@14002000 { - compatible = "mediatek,mt8173-mdp-rdma"; - reg = <0 0x14002000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA1>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA1>; - mediatek,larb = <&larb4>; - }; + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + mediatek,larb = <&larb4>; + }; - mdp_rsz0: rsz@14003000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14003000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; - mdp_rsz1: rsz@14004000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14004000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; - mdp_rsz2: rsz@14005000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14005000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; - mdp_wdma0: wdma@14006000 { - compatible = "mediatek,mt8173-mdp-wdma"; - reg = <0 0x14006000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WDMA>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WDMA>; - mediatek,larb = <&larb0>; - }; + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + mediatek,larb = <&larb0>; + }; - mdp_wrot0: wrot@14007000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14007000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT0>; - mediatek,larb = <&larb0>; - }; + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + mediatek,larb = <&larb0>; + }; - mdp_wrot1: wrot@14008000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14008000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT1>; - mediatek,larb = <&larb4>; - }; + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + mediatek,larb = <&larb4>; }; ovl0: ovl@1400c000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 2b17936ac5be..c2f0f2743578 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -12,7 +12,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@01003000 { + pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -55,6 +55,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -68,6 +69,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 5e62e68ac053..0b0552c9f7dd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -348,6 +348,13 @@ reg-names = "pmc", "wake", "aotag", "scratch"; }; + ccplex@e000000 { + compatible = "nvidia,tegra186-ccplex-cluster"; + reg = <0x0 0x0e000000 0x0 0x3fffff>; + + nvidia,bpmp = <&bpmp>; + }; + gpu@17000000 { compatible = "nvidia,gp10b"; reg = <0x0 0x17000000 0x0 0x1000000>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 4c1ea7a08d43..7cb95e042117 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -7,7 +7,7 @@ model = "NVIDIA Jetson TX1 Developer Kit"; compatible = "nvidia,p2371-2180", "nvidia,tegra210"; - pcie-controller@01003000 { + pcie@1003000 { status = "okay"; avdd-pll-uerefe-supply = <&avdd_1v05_pll>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 8f26c4d4409a..29f471e0f22a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -11,7 +11,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@01003000 { + pcie@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -51,6 +51,7 @@ device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; reg = <0x000800 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; @@ -64,6 +65,7 @@ device_type = "pci"; assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; reg = <0x001000 0 0 0 0>; + bus-range = <0x00 0xff>; status = "disabled"; #address-cells = <3>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index a17f5b9a5de6..bd310ac1967a 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -178,7 +178,7 @@ led@5 { label = "apq8016-sbc:yellow:wlan"; gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "wlan"; + linux,default-trigger = "phy0tx"; default-state = "off"; }; @@ -215,22 +215,16 @@ usb@78d9000 { extcon = <&usb_id>, <&usb_id>; status = "okay"; - }; - - ehci@78d9000 { - status = "okay"; - }; - - phy@78d9000 { - v1p8-supply = <&pm8916_l7>; - v3p3-supply = <&pm8916_l13>; - vddcx-supply = <&pm8916_s1>; - extcon = <&usb_id>, <&usb_id>; - dr_mode = "otg"; - status = "okay"; - switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_sw_sel_pm>; + adp-disable; + hnp-disable; + srp-disable; + ulpi { + phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + extcon = <&usb_id>; + }; + }; }; lpass@07708000 { @@ -348,6 +342,14 @@ pinctrl-0 = <&usb_id_default>; }; + usb-switch { + compatible = "toshiba,tc7usb40mu"; + switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + extcon = <&usb_id>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_sw_sel_pm>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 17691abea608..039991f80831 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -546,44 +546,40 @@ status = "disabled"; }; - usb_dev: usb@78d9000 { + otg: usb@78d9000 { compatible = "qcom,ci-hdrc"; - reg = <0x78d9000 0x400>; - dr_mode = "peripheral"; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - usb-phy = <&usb_otg>; - status = "disabled"; - }; - - usb_host: ehci@78d9000 { - compatible = "qcom,ehci-host"; - reg = <0x78d9000 0x400>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - usb-phy = <&usb_otg>; - status = "disabled"; - }; - - usb_otg: phy@78d9000 { - compatible = "qcom,usb-otg-snps"; - reg = <0x78d9000 0x400>; + reg = <0x78d9000 0x200>, + <0x78d9200 0x200>; interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - - qcom,vdd-levels = <500000 1000000 1320000>; - qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; - dr_mode = "peripheral"; - qcom,otg-control = <2>; // PMIC - qcom,manual-pullup; - clocks = <&gcc GCC_USB_HS_AHB_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>, - <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "iface", "core", "sleep"; - - resets = <&gcc GCC_USB2A_PHY_BCR>, - <&gcc GCC_USB_HS_BCR>; - reset-names = "phy", "link"; + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + qcom,init-seq = /bits/ 8 <0x0 0x44 + 0x1 0x6b 0x2 0x24 0x3 0x13>; + }; + }; }; intc: interrupt-controller@b000000 { diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 44b2d37d8c4b..171578747ed0 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -68,6 +68,30 @@ clock-frequency = <32768>; }; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + + sfpb_mutex: hwmutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_regs 0x0 0x100>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&sfpb_mutex 3>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -82,6 +106,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f900d000 { + compatible = "syscon"; + reg = <0xf900d000 0x2000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -172,12 +201,36 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + + sfpb_mutex_regs: syscon@fd484000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "syscon"; + reg = <0xfd484000 0x400>; + }; }; memory { device_type = "memory"; reg = <0 0 0 0>; // bootloader will update }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_region: smem@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 9bc9c857a000..8f085716e258 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -311,6 +311,12 @@ reg = <0x300000 0x90000>; }; + kryocc: clock-controller@6400000 { + compatible = "qcom,apcc-msm8996"; + reg = <0x6400000 0x90000>; + #clock-cells = <1>; + }; + blsp1_spi0: spi@07575000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07575000 0x600>; diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile new file mode 100644 index 000000000000..8521e921e59a --- /dev/null +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts new file mode 100644 index 000000000000..6efa8091bb30 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +/memreserve/ 0x0000000000000000 0x0000000000030000; +/memreserve/ 0x000000000001f000 0x0000000000001000; +/memreserve/ 0x0000000000030000 0x00000000000d0000; +/memreserve/ 0x0000000001b00000 0x00000000004be000; +/memreserve/ 0x0000000001ffe000 0x0000000000004000; + +#include "rtd1295.dtsi" + +/ { + compatible = "zidoo,x9s", "realtek,rtd1295"; + model = "Zidoo X9S"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi new file mode 100644 index 000000000000..d8f84666c8ce --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -0,0 +1,131 @@ +/* + * Realtek RTD1295 SoC + * + * Copyright (c) 2016-2017 Andreas Färber + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "realtek,rtd1295"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tee@10100000 { + reg = <0x10100000 0xf00000>; + no-map; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + /* Exclude up to 2 GiB of RAM */ + ranges = <0x80000000 0x80000000 0x80000000>; + + uart0: serial@98007800 { + compatible = "snps,dw-apb-uart"; + reg = <0x98007800 0x400>, + <0x98007000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <27000000>; + status = "disabled"; + }; + + uart1: serial@9801b200 { + compatible = "snps,dw-apb-uart"; + reg = <0x9801b200 0x100>, + <0x9801b00c 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + status = "disabled"; + }; + + uart2: serial@9801b400 { + compatible = "snps,dw-apb-uart"; + reg = <0x9801b400 0x100>, + <0x9801b00c 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <432000000>; + status = "disabled"; + }; + + gic: interrupt-controller@ff011000 { + compatible = "arm,gic-400"; + reg = <0xff011000 0x1000>, + <0xff012000 0x2000>, + <0xff014000 0x2000>, + <0xff016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 1618e0a3c81d..acc4bb30d485 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,4 +1,6 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts new file mode 100644 index 000000000000..95fe207cb6a3 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts @@ -0,0 +1,42 @@ +/* + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 + +/dts-v1/; +#include "r8a7795-es1.dtsi" +#include "ulcb.dtsi" + +/ { + model = "Renesas H3ULCB board based on r8a7795 ES1.x"; + compatible = "renesas,h3ulcb", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts new file mode 100644 index 000000000000..b84c156ed696 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -0,0 +1,115 @@ +/* + * Device Tree Source for the Salvator-X board + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 + +/dts-v1/; +#include "r8a7795-es1.dtsi" +#include "salvator-x.dtsi" + +/ { + model = "Renesas Salvator-X board based on r8a7795 ES1.x"; + compatible = "renesas,salvator-x", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>, + <&versaclock5 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; + +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; + +&ohci2 { + status = "okay"; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&sata { + status = "okay"; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi new file mode 100644 index 000000000000..a0ba7bd21ea3 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -0,0 +1,84 @@ +/* + * Device Tree Source for the r8a7795 ES1.x SoC + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "r8a7795.dtsi" + +&soc { + xhci1: usb@ee0400000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; + status = "disabled"; + }; + + fcpf2: fcp@fe952000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe952000 0 0x200>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 613>; + }; + + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 629>; + + renesas,fcp = <&fcpvi2>; + }; + + fcpvi2: fcp@fe9cf000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9cf000 0 0x200>; + clocks = <&cpg CPG_MOD 609>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 609>; + }; + + vspd3: vsp@fea38000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea38000 0 0x4000>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 620>; + + renesas,fcp = <&fcpvd3>; + }; + + fcpvd3: fcp@fea3f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; + }; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; + renesas,fcp = <&fcpf2>; + }; +}; + +&du { + compatible = "renesas,du-r8a7795"; + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index ab352159de65..0426f41765f0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -9,24 +9,16 @@ * kind, whether express or implied. */ +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 + /dts-v1/; #include "r8a7795.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "ulcb.dtsi" / { - model = "Renesas H3ULCB board based on r8a7795"; + model = "Renesas H3ULCB board based on r8a7795 ES2.0+"; compatible = "renesas,h3ulcb", "renesas,r8a7795"; - aliases { - serial0 = &scif2; - ethernet0 = &avb; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -47,330 +39,4 @@ device_type = "memory"; reg = <0x7 0x00000000 0x0 0x40000000>; }; - - leds { - compatible = "gpio-leds"; - - led5 { - gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - }; - led6 { - gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - key-1 { - linux,code = <KEY_1>; - label = "SW3"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - }; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk_a"; - function = "scif_clk"; - }; - - i2c2_pins: i2c2 { - groups = "i2c2_a"; - function = "i2c2"; - }; - - avb_pins: avb { - groups = "avb_mdc"; - function = "avb"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; - function = "ssi"; - }; - - sound_clk_pins: sound-clk { - groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout3_a"; - function = "audio_clk"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - - clock-frequency = <100000>; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 3>; - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1/2/3 */ - #clock-cells = <1>; - clock-frequency = <11289600>; - - status = "okay"; - - /* update <audio_clk_b> to <cs2000> */ - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&cs2000>, - <&audio_clk_c>, - <&cpg CPG_CORE R8A7795_CLK_S0D4>; - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; - }; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&sdhi2 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; - -&wdt0 { - timeout-sec = <60>; - status = "okay"; -}; - -&audio_clk_a { - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 639aa085d996..684fb3b9d154 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -8,577 +8,108 @@ * kind, whether express or implied. */ -/* - * SSI-AK4613 - * - * This command is required when Playback/Capture - * - * amixer set "DVC Out" 100% - * amixer set "DVC In" 100% - * - * You can use Mute - * - * amixer set "DVC Out Mute" on - * amixer set "DVC In Mute" on - * - * You can use Volume Ramp - * - * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" - * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" - * amixer set "DVC Out Ramp" on - * aplay xxx.wav & - * amixer set "DVC Out" 80% // Volume Down - * amixer set "DVC Out" 100% // Volume Up - */ +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 /dts-v1/; #include "r8a7795.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7795"; + model = "Renesas Salvator-X board based on r8a7795 ES2.0+"; compatible = "renesas,salvator-x", "renesas,r8a7795"; - aliases { - serial0 = &scif2; - serial1 = &scif1; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - vcc_sdhi3: regulator-vcc-sdhi3 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI3 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi3: regulator-vccq-sdhi3 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI3 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; }; - vbus0_usb2: regulator-vbus0-usb2 { - compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; - enable-active-high; + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; }; - audio_clkout: audio_clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; }; +}; - rsnd_ak4613: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcpu>; - simple-audio-card,frame-master = <&sndcpu>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4613>; - }; - }; +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>, + <&versaclock5 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; - vga-encoder { - compatible = "adi,adv7123"; +&ehci2 { + status = "okay"; +}; - ports { - #address-cells = <1>; - #size-cells = <0>; +&hdmi0 { + status = "okay"; - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; }; }; }; +}; - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; }; -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; +&hdmi1 { status = "okay"; ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - port@3 { - lvds_connector: endpoint { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; }; }; }; }; -&extal_clk { - clock-frequency = <16666666>; +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; }; -&extalr_clk { - clock-frequency = <32768>; +&ohci2 { + status = "okay"; }; &pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - scif1_pins: scif1 { - groups = "scif1_data_a", "scif1_ctrl"; - function = "scif1"; - }; - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - scif_clk_pins: scif_clk { - groups = "scif_clk_a"; - function = "scif_clk"; - }; - - i2c2_pins: i2c2 { - groups = "i2c2_a"; - function = "i2c2"; - }; - - avb_pins: avb { - mux { - groups = "avb_link", "avb_phy_int", "avb_mdc", - "avb_mii"; - function = "avb"; - }; - - pins_mdc { - groups = "avb_mdc"; - drive-strength = <24>; - }; - - pins_mii_tx { - pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", - "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; - drive-strength = <12>; - }; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; - function = "du"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - sdhi3_pins: sd3 { - groups = "sdhi3_data4", "sdhi3_ctrl"; - function = "sdhi3"; - power-source = <3300>; - }; - - sdhi3_pins_uhs: sd3_uhs { - groups = "sdhi3_data4", "sdhi3_ctrl"; - function = "sdhi3"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; - function = "ssi"; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", - "audio_clkout_a", "audio_clkout3_a"; - function = "audio_clk"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - mux { - groups = "usb1"; - function = "usb1"; - }; - - ovc { - pins = "GP_6_27"; - bias-pull-up; - }; - - pwen { - pins = "GP_6_26"; - bias-pull-down; - }; - }; - usb2_pins: usb2 { groups = "usb2"; function = "usb2"; }; }; -&scif1 { - pinctrl-0 = <&scif1_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - - clock-frequency = <100000>; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 3>; - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - }; - - cs2000: clk_multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x12_clk>; - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1/2/3 */ - #clock-cells = <1>; - clock-frequency = <11289600>; - - status = "okay"; - - /* update <audio_clk_b> to <cs2000> */ - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, - <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, - <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, - <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, - <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, - <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, - <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, - <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, - <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, - <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&audio_clk_a>, <&cs2000>, - <&audio_clk_c>, - <&cpg CPG_CORE R8A7795_CLK_S0D4>; - - rcar_sound,dai { - dai0 { - playback = <&ssi0 &src0 &dvc0>; - capture = <&ssi1 &src1 &dvc1>; - }; - }; -}; - &sata { status = "okay"; }; -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&sdhi2 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&sdhi3 { - pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi3>; - vqmmc-supply = <&vccq_sdhi3>; - cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&ssi1 { - shared-pin; -}; - -&wdt0 { - timeout-sec = <60>; - status = "okay"; -}; - -&audio_clk_a { - clock-frequency = <22579200>; -}; - -&i2c_dvfs { - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&xhci0 { - status = "okay"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb2_phy1 { - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; status = "okay"; }; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&hsusb { - status = "okay"; -}; - -&pcie_bus_clk { - clock-frequency = <100000000>; -}; - -&pciec0 { - status = "okay"; -}; - -&pciec1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts new file mode 100644 index 000000000000..de354957144b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -0,0 +1,109 @@ +/* + * Device Tree Source for the Salvator-X 2nd version board + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#define CPG_AUDIO_CLK_I R8A7795_CLK_S0D4 + +/dts-v1/; +#include "r8a7795.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+"; + compatible = "renesas,salvator-xs", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>, + <&x21_clk>, + <&x22_clk>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0", + "dclkin.1", "dclkin.2"; +}; + +&ehci2 { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; + +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; + +&ohci2 { + status = "okay"; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index e99d6443b3e4..e31c1b660b3f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -182,7 +182,7 @@ clock-frequency = <0>; }; - soc { + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -398,7 +398,7 @@ #power-domain-cells = <1>; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a7795"; reg = <0 0xe6060000 0 0x50c>; }; @@ -883,6 +883,8 @@ clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1118,6 +1120,16 @@ "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; status = "disabled"; rcar_sound,dvc { @@ -1274,16 +1286,6 @@ status = "disabled"; }; - xhci1: usb@ee0400000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; - usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; @@ -1568,14 +1570,6 @@ resets = <&cpg 614>; }; - fcpf2: fcp@fe952000 { - compatible = "renesas,fcpf"; - reg = <0 0xfe952000 0 0x200>; - clocks = <&cpg CPG_MOD 613>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 613>; - }; - vspbd: vsp@fe960000 { compatible = "renesas,vsp2"; reg = <0 0xfe960000 0 0x8000>; @@ -1633,25 +1627,6 @@ resets = <&cpg 610>; }; - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; - }; - - fcpvi2: fcp@fe9cf000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9cf000 0 0x200>; - clocks = <&cpg CPG_MOD 609>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 609>; - }; - vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x4000>; @@ -1709,25 +1684,6 @@ resets = <&cpg 601>; }; - vspd3: vsp@fea38000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x4000>; - interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 620>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 620>; - - renesas,fcp = <&fcpvd3>; - }; - - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - }; - fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; @@ -1748,18 +1704,57 @@ renesas,fcp = <&fcpf1>; }; - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; + hdmi0: hdmi0@fead0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + }; + }; + + hdmi1: hdmi1@feae0000 { + compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; + reg = <0 0xfeae0000 0 0x10000>; + interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 728>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi1_in: endpoint { + remote-endpoint = <&du_out_hdmi1>; + }; + }; + port@1 { + reg = <1>; + }; + }; }; du: display@feb00000 { - compatible = "renesas,du-r8a7795"; reg = <0 0xfeb00000 0 0x80000>, <0 0xfeb90000 0 0x14>; reg-names = "du", "lvds.0"; @@ -1775,8 +1770,6 @@ clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1789,11 +1782,13 @@ port@1 { reg = <1>; du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; }; }; port@2 { reg = <2>; du_out_hdmi1: endpoint { + remote-endpoint = <&dw_hdmi1_in>; }; }; port@3 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index 372b2a944716..38b58b7fca4b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -9,180 +9,24 @@ * kind, whether express or implied. */ +#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 + /dts-v1/; #include "r8a7796.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "ulcb.dtsi" / { model = "Renesas M3ULCB board based on r8a7796"; compatible = "renesas,m3ulcb", "renesas,r8a7796"; - aliases { - serial0 = &scif2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; - leds { - compatible = "gpio-leds"; - - led5 { - gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; - }; - led6 { - gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; - }; - }; - - keyboard { - compatible = "gpio-keys"; - - key-1 { - linux,code = <KEY_1>; - label = "SW3"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; - }; - }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk_a"; - function = "scif_clk"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; }; }; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&sdhi2 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&wdt0 { - timeout-sec = <60>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index c9f59b6ce33f..db4f162d6bdd 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -8,25 +8,16 @@ * kind, whether express or implied. */ +#define CPG_AUDIO_CLK_I R8A7796_CLK_S0D4 + /dts-v1/; #include "r8a7796.dtsi" -#include <dt-bindings/gpio/gpio.h> +#include "salvator-x.dtsi" / { model = "Renesas Salvator-X board based on r8a7796"; compatible = "renesas,salvator-x", "renesas,r8a7796"; - aliases { - serial0 = &scif2; - serial1 = &scif1; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel"; - stdout-path = "serial0:115200n8"; - }; - memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -37,233 +28,4 @@ device_type = "memory"; reg = <0x6 0x00000000 0x0 0x80000000>; }; - - reg_1p8v: regulator0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator1 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - vcc_sdhi3: regulator-vcc-sdhi3 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI3 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi3: regulator-vccq-sdhi3 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI3 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - avb_pins: avb { - groups = "avb_mdc"; - function = "avb"; - }; - - scif1_pins: scif1 { - groups = "scif1_data_a", "scif1_ctrl"; - function = "scif1"; - }; - - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; - }; - scif_clk_pins: scif_clk { - groups = "scif_clk_a"; - function = "scif_clk"; - }; - - i2c2_pins: i2c2 { - groups = "i2c2_a"; - function = "i2c2"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data8", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - sdhi3_pins: sd3 { - groups = "sdhi3_data4", "sdhi3_ctrl"; - function = "sdhi3"; - power-source = <3300>; - }; - - sdhi3_pins_uhs: sd3_uhs { - groups = "sdhi3_data4", "sdhi3_ctrl"; - function = "sdhi3"; - power-source = <1800>; - }; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&extal_clk { - clock-frequency = <16666666>; -}; - -&extalr_clk { - clock-frequency = <32768>; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&sdhi2 { - /* used for on-board 8bit eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&sdhi3 { - pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi3>; - vqmmc-supply = <&vccq_sdhi3>; - cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; - bus-width = <4>; - sd-uhs-sdr50; - status = "okay"; -}; - -&scif1 { - pinctrl-0 = <&scif1_pins>; - pinctrl-names = "default"; - - uart-has-rtscts; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&wdt0 { - timeout-sec = <60>; - status = "okay"; -}; - -&i2c_dvfs { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 2ec1ed5f4991..1f6710912045 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -120,6 +120,29 @@ clock-frequency = <0>; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + /* External CAN clock - to be overridden by boards that provide it */ can_clk: can { compatible = "fixed-clock"; @@ -134,6 +157,13 @@ clock-frequency = <0>; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -362,6 +392,78 @@ clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -931,6 +1033,106 @@ dma-channels = <16>; }; + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + hsusb: usb@e6590000 { + /* placeholder */ + }; + + xhci0: usb@ee000000 { + /* placeholder */ + }; + + ohci0: usb@ee080000 { + /* placeholder */ + }; + + ehci0: usb@ee080100 { + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + /* placeholder */ + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7796"; reg = <0 0xee100000 0 0x2000>; @@ -1033,5 +1235,224 @@ }; }; }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7796_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + pciec0: pcie@fe000000 { + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + /* placeholder */ + }; + + du: display@feb00000 { + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi new file mode 100644 index 000000000000..aef35e0b685a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -0,0 +1,629 @@ +/* + * Device Tree Source for common parts of Salvator-X board variants + * + * Copyright (C) 2015-2016 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * SSI-AK4613 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &scif2; + serial1 = &scif1; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + audio_clkout: audio_clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + + brightness-levels = <256 128 64 16 8 4 0>; + default-brightness-level = <6>; + + enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + label = "HDMI1 OUT"; + type = "a"; + + port { + hdmi1_con: endpoint { + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + /* External DU dot clocks */ + x21_clk: x21-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x22_clk: x22-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x23_clk: x23-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + port@3 { + lvds_connector: endpoint { + }; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hsusb { + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&i2c4 { + status = "okay"; + + csa_vdd: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; + + csa_dvfs: adc@7f { + compatible = "maxim,max9611"; + reg = <0x7f>; + + shunt-resistor-micro-ohms = <5000>; + }; +}; + +&i2c_dvfs { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_phy_int", "avb_mdc", + "avb_mii"; + function = "avb"; + }; + + pins_mdc { + groups = "avb_mdc"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; + function = "du"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + pwm1_pins: pwm1 { + groups = "pwm1_a"; + function = "pwm1"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + + pwen { + pins = "GP_6_26"; + bias-pull-down; + }; + }; +}; + +&pwm1 { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600 12288000>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi new file mode 100644 index 000000000000..468868c8ed9f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi @@ -0,0 +1,30 @@ +/* + * Device Tree Source for the Salvator-X board + * + * Copyright (C) 2015-2016 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "salvator-common.dtsi" + +/ { + model = "Renesas Salvator-X board"; + compatible = "renesas,salvator-x"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&i2c4 { + versaclock5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi new file mode 100644 index 000000000000..81227e3c2c6f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi @@ -0,0 +1,20 @@ +/* + * Device Tree Source for the Salvator-X 2nd version board + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "salvator-common.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board"; + compatible = "renesas,salvator-xs"; +}; + +&extal_clk { + clock-frequency = <16640000>; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi new file mode 100644 index 000000000000..b5c6ee07d7f9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -0,0 +1,367 @@ +/* + * Device Tree Source for the R-Car Gen3 ULCB board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas R-Car Gen3 ULCB board"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&ohci1 { + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_phy_int", "avb_mdc", + "avb_mii"; + function = "avb"; + }; + + pins_mdc { + groups = "avb_mdc"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600 12288000>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index b5636bba6b1c..bcfa53b1e6b7 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 7e69f1fe78d6..0be96cee27bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -372,6 +372,39 @@ <32768>; }; + sdmmc: dwmmc@ff500000 { + compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff500000 0x0 0x4000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + status = "disabled"; + }; + + sdio: dwmmc@ff510000 { + compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff510000 0x0 0x4000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + status = "disabled"; + }; + + emmc: dwmmc@ff520000 { + compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff520000 0x0 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + fifo-depth = <0x100>; + status = "disabled"; + }; + gmac2io: ethernet@ff540000 { compatible = "rockchip,rk3328-gmac"; reg = <0x0 0xff540000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts new file mode 100644 index 000000000000..ba1d9810ad1e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -0,0 +1,718 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" + +/ { + model = "Firefly-RK3399 Board"; + compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pwms = <&pwm0 0 25000 0>; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + rt5640-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rockchip,rt5640-codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Mic Jack", "MICBIAS1", + "IN1P", "Mic Jack", + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&rt5640>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc1v8_pmu>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG2 { + regulator-name = "vcc2v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <0>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + rt5640: rt5640@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + realtek,in1-differential; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&rt5640_hpcon>; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + accelerometer@68 { + compatible = "invensense,mpu6500"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&i2s2 { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_3g_drv: pcie-3g-drv { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + rt5640 { + rt5640_hpcon: rt5640-hpcon { + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + keep-power-in-suspend; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 0d960b7f7625..eb5059344023 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -44,7 +44,7 @@ #include <dt-bindings/input/input.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-op1-opp.dtsi" / { chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi new file mode 100644 index 000000000000..be7fe635f7c1 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -0,0 +1,145 @@ +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <825000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <850000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <900000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1100000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1150000>; + }; + }; + + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <850000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <900000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <975000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1050000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1150000>; + }; + opp08 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <1250000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi index dd82e16236a8..c83460db130a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -56,22 +56,18 @@ }; opp02 { opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <800000>; + opp-microvolt = <850000>; }; opp03 { opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <875000>; + opp-microvolt = <925000>; }; opp04 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <925000>; + opp-microvolt = <1000000>; }; opp05 { opp-hz = /bits/ 64 <1416000000>; - opp-microvolt = <1050000>; - }; - opp06 { - opp-hz = /bits/ 64 <1512000000>; opp-microvolt = <1125000>; }; }; @@ -107,15 +103,11 @@ }; opp06 { opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <1075000>; + opp-microvolt = <1100000>; }; opp07 { opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1150000>; - }; - opp08 { - opp-hz = /bits/ 64 <2016000000>; - opp-microvolt = <1250000>; + opp-microvolt = <1200000>; }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index f4f3c96c798d..69c56f7316c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -56,6 +56,7 @@ #size-cells = <2>; aliases { + ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -220,7 +221,7 @@ #size-cells = <2>; #interrupt-cells = <1>; aspm-no-l0s; - bus-range = <0x0 0x1>; + bus-range = <0x0 0x1f>; clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; clock-names = "aclk", "aclk-perf", @@ -239,8 +240,8 @@ msi-map = <0x0 &its 0x0 0x1000>; phys = <&pcie_phy>; phy-names = "pcie-phy"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000 + 0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, @@ -769,11 +770,6 @@ status = "disabled"; }; - qos_sd: qos@ffa74000 { - compatible = "syscon"; - reg = <0x0 0xffa74000 0x0 0x20>; - }; - qos_emmc: qos@ffa58000 { compatible = "syscon"; reg = <0x0 0xffa58000 0x0 0x20>; @@ -784,6 +780,41 @@ reg = <0x0 0xffa5c000 0x0 0x20>; }; + qos_pcie: qos@ffa60080 { + compatible = "syscon"; + reg = <0x0 0xffa60080 0x0 0x20>; + }; + + qos_usb_host0: qos@ffa60100 { + compatible = "syscon"; + reg = <0x0 0xffa60100 0x0 0x20>; + }; + + qos_usb_host1: qos@ffa60180 { + compatible = "syscon"; + reg = <0x0 0xffa60180 0x0 0x20>; + }; + + qos_usb_otg0: qos@ffa70000 { + compatible = "syscon"; + reg = <0x0 0xffa70000 0x0 0x20>; + }; + + qos_usb_otg1: qos@ffa70080 { + compatible = "syscon"; + reg = <0x0 0xffa70080 0x0 0x20>; + }; + + qos_sd: qos@ffa74000 { + compatible = "syscon"; + reg = <0x0 0xffa74000 0x0 0x20>; + }; + + qos_sdioaudio: qos@ffa76000 { + compatible = "syscon"; + reg = <0x0 0xffa76000 0x0 0x20>; + }; + qos_hdcp: qos@ffa90000 { compatible = "syscon"; reg = <0x0 0xffa90000 0x0 0x20>; @@ -854,6 +885,11 @@ reg = <0x0 0xffad0000 0x0 0x20>; }; + qos_perihp: qos@ffad8080 { + compatible = "syscon"; + reg = <0x0 0xffad8080 0x0 0x20>; + }; + qos_gpu: qos@ffae0000 { compatible = "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; @@ -1676,6 +1712,91 @@ }; }; + sdio0 { + sdio0_bus1: sdio0-bus1 { + rockchip,pins = + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC5 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC6 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PC7 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 RK_PD0 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdio0_cd: sdio0-cd { + rockchip,pins = + <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_pwr: sdio0-pwr { + rockchip,pins = + <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_bkpwr: sdio0-bkpwr { + rockchip,pins = + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_wp: sdio0-wp { + rockchip,pins = + <0 RK_PA3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdio0_int: sdio0-int { + rockchip,pins = + <0 RK_PA4 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PB0 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB1 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB2 RK_FUNC_1 &pcfg_pull_up>, + <4 RK_PB3 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PB4 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PB5 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = + <0 RK_PA7 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_wp: sdmmc-wp { + rockchip,pins = + <0 RK_PB0 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + sleep { ap_pwroff: ap-pwroff { rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>; @@ -1691,6 +1812,11 @@ rockchip,pins = <4 21 RK_FUNC_1 &pcfg_pull_none>; }; + + spdif_bus_1: spdif-bus-1 { + rockchip,pins = + <3 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + }; }; spi0 { @@ -1950,6 +2076,19 @@ }; }; + hdmi { + hdmi_i2c_xfer: hdmi-i2c-xfer { + rockchip,pins = + <4 RK_PC1 RK_FUNC_3 &pcfg_pull_none>, + <4 RK_PC0 RK_FUNC_3 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = + <4 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pcie { pcie_clkreqn: pci-clkreqn { rockchip,pins = @@ -1960,6 +2099,16 @@ rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none>; }; + + pcie_clkreqn_cpm: pci-clkreqn-cpm { + rockchip,pins = + <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_clkreqnb_cpm: pci-clkreqnb-cpm { + rockchip,pins = + <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile index 5538598b302c..4a13a3a97101 100644 --- a/arch/arm64/boot/dts/socionext/Makefile +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -1,5 +1,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ld11-global.dtb \ uniphier-ld11-ref.dtb \ + uniphier-ld20-global.dtb \ uniphier-ld20-ref.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts new file mode 100644 index 000000000000..115357018ef7 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -0,0 +1,70 @@ +/* + * Device Tree Source for UniPhier LD11 Global Board + * + * Copyright (C) 2016-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +/include/ "uniphier-ld11.dtsi" + +/ { + model = "UniPhier LD11 Global Board (REF_LD11_GP)"; + compatible = "socionext,uniphier-ld11-global", + "socionext,uniphier-ld11"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 0173e93ab141..cc8ebe34c27c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 151c043b4835..bdce5b89baec 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -4,46 +4,10 @@ * Copyright (C) 2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/memreserve/ 0x80000000 0x00080000; +/memreserve/ 0x80000000 0x02000000; / { compatible = "socionext,uniphier-ld11"; @@ -89,31 +53,31 @@ compatible = "operating-points-v2"; opp-shared; - opp@245000000 { + opp-245000000 { opp-hz = /bits/ 64 <245000000>; clock-latency-ns = <300>; }; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@490000000 { + opp-490000000 { opp-hz = /bits/ 64 <490000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@653334000 { + opp-653334000 { opp-hz = /bits/ 64 <653334000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@980000000 { + opp-980000000 { opp-hz = /bits/ 64 <980000000>; clock-latency-ns = <300>; }; @@ -268,7 +232,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; @@ -310,6 +274,11 @@ bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + cdns,phy-input-delay-legacy = <4>; + cdns,phy-input-delay-mmc-highspeed = <2>; + cdns,phy-input-delay-mmc-ddr = <3>; + cdns,phy-dll-delay-sdclk = <21>; + cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; usb0: usb@5a800100 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts new file mode 100644 index 000000000000..9f620d4101b5 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -0,0 +1,52 @@ +/* + * Device Tree Source for UniPhier LD20 Global Board + * + * Copyright (C) 2015-2017 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; +/include/ "uniphier-ld20.dtsi" + +/ { + model = "UniPhier LD20 Global Board (REF_LD20_GP)"; + compatible = "socionext,uniphier-ld20-global", + "socionext,uniphier-ld20"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0xc0000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index fca4c479b469..494166aee24c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -4,43 +4,7 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 6193f11acb78..de1e75362817 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -4,46 +4,10 @@ * Copyright (C) 2015-2016 Socionext Inc. * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ -/memreserve/ 0x80000000 0x00080000; +/memreserve/ 0x80000000 0x02000000; / { compatible = "socionext,uniphier-ld20"; @@ -116,35 +80,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; @@ -154,35 +118,35 @@ compatible = "operating-points-v2"; opp-shared; - opp@250000000 { + opp-250000000 { opp-hz = /bits/ 64 <250000000>; clock-latency-ns = <300>; }; - opp@275000000 { + opp-275000000 { opp-hz = /bits/ 64 <275000000>; clock-latency-ns = <300>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <300>; }; - opp@550000000 { + opp-550000000 { opp-hz = /bits/ 64 <550000000>; clock-latency-ns = <300>; }; - opp@666667000 { + opp-666667000 { opp-hz = /bits/ 64 <666667000>; clock-latency-ns = <300>; }; - opp@733334000 { + opp-733334000 { opp-hz = /bits/ 64 <733334000>; clock-latency-ns = <300>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <300>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; clock-latency-ns = <300>; }; @@ -337,7 +301,7 @@ pinctrl-0 = <&pinctrl_system_bus>; }; - smpctrl@59800000 { + smpctrl@59801000 { compatible = "socionext,uniphier-smpctrl"; reg = <0x59801000 0x400>; }; @@ -384,6 +348,11 @@ bus-width = <8>; mmc-ddr-1_8v; mmc-hs200-1_8v; + cdns,phy-input-delay-legacy = <4>; + cdns,phy-input-delay-mmc-highspeed = <2>; + cdns,phy-input-delay-mmc-ddr = <3>; + cdns,phy-dll-delay-sdclk = <21>; + cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; soc-glue@5f800000 { diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index 316dc713268c..d83bf789c864 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; |