Merge branch 'topic/asoc' into for-linus

* topic/asoc: (226 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ASoC: Fix WM835x Out4 capture enumeration
  ASoC: Remove unuused hw_read_t
  ASoC: fix pxa2xx-ac97.c breakage
  ASoC: Fully specify DC servo bits to update in wm_hubs
  ASoC: Debugged improper setting of PLL fields in WM8580 driver
  ASoC: new board driver to connect bfin-5xx with ad1836 codec
  ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
  ASoC: davinci: i2c device creation moved into board files
  ASoC: Don't reconfigure WM8350 FLL if not needed
  ASoC: Fix s3c-i2s-v2 build
  ASoC: Make platform data optional for TLV320AIC3x
  ASoC: Add S3C24xx dependencies for Simtec machines
  ASoC: SDP3430: Fix TWL GPIO6 pin mux request
  ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
  ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
  ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
  OMAP: McBSP: Use textual values in DMA operating mode sysfs files
  ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
  ASoC: Select core DMA when building for S3C64xx
  ...

7 files changed, 491 insertions, 21 deletions

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 99b6e1546311..0447d26d454b 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -128,6 +128,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -136,6 +137,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x3FF,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -144,6 +146,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -152,6 +155,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -160,6 +164,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x6F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index 16eb02552d5d..a3449e35a6f5 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -3,10 +3,12 @@
 
 #include <sound/core.h>
 #include <sound/pcm.h>
+#include <sound/ac97_codec.h>
 
 /*
  * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
  *              a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
 
  * reset_gpio should only be specified for pxa27x CPUs where a silicon
  * bug prevents correct operation of the reset line. If not specified,
@@ -20,6 +22,7 @@ typedef struct {
 	void (*resume)(void *);
 	void *priv;
 	int reset_gpio;
+	void *codec_pdata[AC97_BUS_MAX_DEVICES];
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f09006..9b00f4cbc903 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1127,6 +1127,11 @@ int omap_dma_running(void)
 void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -1149,6 +1154,11 @@ EXPORT_SYMBOL(omap_dma_link_lch);
 void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea76769..63a3f254af7b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -134,6 +134,11 @@
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
 #define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_THRSH2	0x90
+#define OMAP_MCBSP_REG_THRSH1	0x94
+#define OMAP_MCBSP_REG_IRQST	0xA0
+#define OMAP_MCBSP_REG_IRQEN	0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
 
@@ -249,8 +254,27 @@
 #define RDISABLE		0x0001
 
 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)	((value)<<8)
+#define SIDLEMODE(value)	((value)<<3)
+#define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
 
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT		0
+#define MCBSP_DMA_MODE_THRESHOLD	1
+#define MCBSP_DMA_MODE_FRAME		2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN		0x4000
+#define XRDYEN			0x0400
+#define XEOFEN			0x0200
+#define XFSXEN			0x0100
+#define XSYNCERREN		0x0080
+#define RRDYEN			0x0008
+#define REOFEN			0x0004
+#define RFSREN			0x0002
+#define RSYNCERREN		0x0001
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -344,6 +368,9 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 buffer_size;
+#endif
 };
 
 struct omap_mcbsp {
@@ -377,6 +404,11 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+	int dma_op_mode;
+	u16 max_tx_thres;
+	u16 max_rx_thres;
+#endif
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
@@ -385,10 +417,25 @@ int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f38..8dc7927906f1 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -198,6 +198,170 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	int dma_op_mode;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Enable wakup behavior, smart idle and all wakeups
+	 * REVISIT: some wakeups may be unnecessary
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+
+		spin_lock_irq(&mcbsp->lock);
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+					CLOCKACTIVITY(0x02));
+			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+					XRDYEN | RRDYEN);
+		} else {
+			syscon |= SIDLEMODE(0x01);
+		}
+		spin_unlock_irq(&mcbsp->lock);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+	}
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Disable wakup behavior, smart idle and all wakeups
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		/*
+		 * HW bug workaround - If no_idle mode is taken, we need to
+		 * go to smart_idle before going to always_idle, or the
+		 * device will not hit retention anymore.
+		 */
+		syscon |= SIDLEMODE(0x02);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		syscon &= ~(SIDLEMODE(0x03));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
+	}
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+#endif
+
 /*
  * We can choose between IRQ based or polled IO.
  * This needs to be called before omap_mcbsp_request().
@@ -257,6 +421,9 @@ int omap_mcbsp_request(unsigned int id)
 	clk_enable(mcbsp->iclk);
 	clk_enable(mcbsp->fclk);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_request(mcbsp);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -305,6 +472,9 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
@@ -328,14 +498,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
  */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +519,58 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}
 
 	/* Enable transmitter and receiver */
+	tx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
 
+	rx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
 
-	udelay(100);
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);
 
-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		/* Release the transmitter and receiver */
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);
 
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -385,16 +582,33 @@ void omap_mcbsp_stop(unsigned int id)
 	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
+	tx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
 
 	/* Reset receiver */
+	rx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w |= (tx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
 
-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
@@ -883,6 +1097,149 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = strict_strtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
+static ssize_t dma_op_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	const char * const *s;
+	int i = 0;
+
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
+
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
+
+	spin_lock_irq(&mcbsp->lock);
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+	mcbsp->dma_op_mode = i;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
+static const struct attribute *additional_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
+	NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
+};
+
+static inline int __devinit omap_additional_add(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devexit omap_additional_remove(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &additional_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+	if (cpu_is_omap34xx()) {
+		mcbsp->max_tx_thres = max_thres(mcbsp);
+		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
+		 * for mcbsp2 instances.
+		 */
+		if (omap_additional_add(mcbsp->dev))
+			dev_warn(mcbsp->dev,
+				"Unable to create additional controls\n");
+	} else {
+		mcbsp->max_tx_thres = -EINVAL;
+		mcbsp->max_rx_thres = -EINVAL;
+	}
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx())
+		omap_additional_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -953,6 +1310,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dev = &pdev->dev;
 	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
+
+	/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+	omap34xx_device_init(mcbsp);
+
 	return 0;
 
 err_fclk:
@@ -976,6 +1337,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
+		omap34xx_device_exit(mcbsp);
+
 		clk_disable(mcbsp->fclk);
 		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
new file mode 100644
index 000000000000..0f440b9168db
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 0fad7571030e..07659dad1748 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,11 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
 #define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
 #define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)