Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann: "This time around, the cleanup branch contains mostly code removal. A number of board files for at91, imx and msm have become obsolete because of the DT conversion and are now ready to be removed. The OMAP platform has traditionally had its own DMA engine abstraction and as this is being phased out, a lot of the original code is now unused and can be removed as well. S3C24xx can be simplified now that the restart code is a proper device driver. Finally, a number of cleanups in shmobile are done to prepare for the addition of new code in other branches" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91: Remove the support for the RSI EWS board arm: mach-omap2: Convert pr_warning to pr_warn ARM: OMAP: Remove unused pieces of legacy DMA API ARM: at91: remove board file for Acme Systems Fox G20 ARM: orion5x: Convert pr_warning to pr_warn ARM: S3C24XX: remove separate restart code ARM: EXYNOS: Do not calculate boot address twice ARM: sunxi: Remove sun4i reboot code from mach directory ARM: imx: Remove mach-mxt_td60 board file ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains() ARM: shmobile: r8a7740: Clean up pm domain table ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains() ARM: shmobile: sh7372: Make domain_devices[] static __initdata ARM: shmobile: mackerel: Make domain_devices[] static __initdata clocksource: tcb_clksrc: sanitize IRQ request ARM: at91/tclib: mask interruptions at shutdown and probe ARM: at91/tclib: move initialization from alloc to probe ARM: at91/tclib: prefer using of devm_* functions ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver ARM: shmobile: r8a7791 is now called "R-Car M2-W" ...
author: Linus Torvalds 2014-10-08 17:06:53 -0400
committer: Linus Torvalds 2014-10-08 17:06:53 -0400
commit: 212fe84a6f215c39795a76517c1c02114d428681 (patch)
tree: 4692680312616d6a5c562f2d494c12d21b697237 /arch/arm
parent: 4a4743e840d06a5772be7c21110807165c5b3c9f (diff)
parent: 05301fe7de11dac87638f1728f8ee8b31bc1cf31 (diff)
105 files changed, 201 insertions, 4021 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32cbbd565902..314bdf1163f9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -650,6 +650,7 @@ config ARCH_SHMOBILE_LEGACY
 	select ARCH_SHMOBILE
 	select ARM_PATCH_PHYS_VIRT if MMU
 	select CLKDEV_LOOKUP
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -660,6 +661,7 @@ config ARCH_SHMOBILE_LEGACY
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
+	select SH_CLK_CPG
 	select SPARSE_IRQ
 	help
 	  Support for Renesas ARM SoC platforms using a non-multiplatform
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index b8a5e8c68f06..e4bffbae515f 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -76,7 +76,6 @@
 
 		simple-audio-card,cpu {
 			sound-dai = <&sai2>;
-			master-clkdir-out;
 			frame-master;
 			bitclock-master;
 		};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 63bde0efc041..a3fb8662ff6c 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -22,7 +22,6 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
@@ -30,10 +29,6 @@ CONFIG_MACH_MX25_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_IMX25_DT=y
 CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_PCM038=y
-CONFIG_MACH_CPUIMX27=y
-CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
-CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 6cc6f7aebdae..dd28e1fedbdc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -28,6 +28,11 @@ config OLD_CLK_AT91
 	bool
 	default AT91_PMC_UNIT && AT91_USE_OLD_CLK
 
+config OLD_IRQ_AT91
+	bool
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -45,18 +50,16 @@ config HAVE_AT91_SMD
 config SOC_AT91SAM9
 	bool
 	select AT91_SAM9_TIME
+	select ATMEL_AIC_IRQ if !OLD_IRQ_AT91
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 
 config SOC_SAMA5
 	bool
 	select AT91_SAM9_TIME
+	select ATMEL_AIC5_IRQ
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	select USE_OF
 
 menu "Atmel AT91 System-on-Chip"
@@ -70,8 +73,7 @@ config ARCH_AT91X40
 	depends on !MMU
 	select CPU_ARM7TDMI
 	select ARCH_USES_GETTIMEOFFSET
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
+	select OLD_IRQ_AT91
 
 	help
 	  Select this if you are using one of Atmel's AT91X40 SoC.
@@ -108,11 +110,10 @@ endif
 if SOC_SAM_V4_V5
 config SOC_AT91RM9200
 	bool "AT91RM9200"
+	select ATMEL_AIC_IRQ if !OLD_IRQ_AT91
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	select HAVE_AT91_USB_CLK
 
 config SOC_AT91SAM9260
diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 44ace320d2e1..d8e88219edb4 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -14,31 +14,37 @@ config ARCH_AT91RM9200
 	bool "AT91RM9200"
 	select SOC_AT91RM9200
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
 	select SOC_AT91SAM9260
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261 or AT91SAM9G10"
 	select SOC_AT91SAM9261
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select SOC_AT91SAM9263
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select SOC_AT91SAM9RL
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select SOC_AT91SAM9G45
 	select AT91_USE_OLD_CLK
+	select OLD_IRQ_AT91
 
 endchoice
 
@@ -132,12 +138,6 @@ config MACH_ECO920
 	bool "eco920"
 	help
 	  Select this if you are using the eco920 board
-
-config MACH_RSI_EWS
-	bool "RSI Embedded Webserver"
-	depends on ARCH_AT91RM9200
-	help
-	  Select this if you are using RSIs EWS board.
 endif
 
 # ----------------------------------------------------------
@@ -212,12 +212,6 @@ config MACH_CPU9G20
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
 
-config MACH_ACMENETUSFOXG20
-	bool "Acme Systems srl FOX Board G20"
-	help
-	  Select this if you are using Acme Systems
-	  FOX Board G20 <http://www.acmesystems.it>
-
 config MACH_PORTUXG20
 	bool "taskit PortuxG20"
 	help
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 78e9cec282f4..40946f4e8921 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -2,11 +2,12 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= irq.o gpio.o setup.o sysirq_mask.o
+obj-y		:= gpio.o setup.o sysirq_mask.o
 obj-m		:=
 obj-n		:=
 obj-		:=
 
+obj-$(CONFIG_OLD_IRQ_AT91)	+= irq.o
 obj-$(CONFIG_OLD_CLK_AT91)	+= clock.o
 obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
 obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
@@ -46,7 +47,6 @@ obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
-obj-$(CONFIG_MACH_RSI_EWS)	+= board-rsi-ews.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
-obj-$(CONFIG_MACH_ACMENETUSFOXG20) += board-foxg20.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index f4b6e91843e4..226563f850b8 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -25,17 +25,6 @@
 #include "at91_aic.h"
 #include "generic.h"
 
-
-static const struct of_device_id irq_of_match[] __initconst = {
-	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
-	{ /*sentinel*/ }
-};
-
-static void __init at91rm9200_dt_init_irq(void)
-{
-	of_irq_init(irq_of_match);
-}
-
 static void __init at91rm9200_dt_timer_init(void)
 {
 #if defined(CONFIG_COMMON_CLK)
@@ -52,8 +41,6 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
 	.init_time      = at91rm9200_dt_timer_init,
 	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
-	.init_irq	= at91rm9200_dt_init_irq,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 575b0be66ca8..dfa8d48146fe 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -34,17 +34,6 @@ static void __init sam9_dt_timer_init(void)
 	at91sam926x_pit_init();
 }
 
-static const struct of_device_id irq_of_match[] __initconst = {
-
-	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
-	{ /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
-	of_irq_init(irq_of_match);
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -54,8 +43,6 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
 	.init_time	= sam9_dt_timer_init,
 	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
-	.init_irq	= at91_dt_init_irq,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 075ec0576ada..d6fe04bcaabd 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -35,17 +35,6 @@ static void __init sama5_dt_timer_init(void)
 	at91sam926x_pit_init();
 }
 
-static const struct of_device_id irq_of_match[] __initconst = {
-
-	{ .compatible = "atmel,sama5d3-aic", .data = at91_aic5_of_init },
-	{ /*sentinel*/ }
-};
-
-static void __init at91_dt_init_irq(void)
-{
-	of_irq_init(irq_of_match);
-}
-
 static int ksz9021rn_phy_fixup(struct phy_device *phy)
 {
 	int value;
@@ -82,9 +71,7 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5 (Device Tree)")
 	/* Maintainer: Atmel */
 	.init_time	= sama5_dt_timer_init,
 	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic5_handle_irq,
 	.init_early	= at91_dt_initialize,
-	.init_irq	= at91_dt_init_irq,
 	.init_machine	= sama5_dt_device_init,
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
deleted file mode 100644
index 8b22c60bb238..000000000000
--- a/arch/arm/mach-at91/board-foxg20.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2008 Atmel
- *  Copyright (C) 2010 Lee McLoughlin - lee@lmmrtech.com
- *  Copyright (C) 2010 Sergio Tanzilli - tanzilli@acmesystems.it
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/w1-gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-/*
- * The FOX Board G20 hardware comes as the "Netus G20" board with
- * just the cpu, ram, dataflash and two header connectors.
- * This is plugged into the FOX Board which provides the ethernet,
- * usb, rtc, leds, switch, ...
- *
- * For more info visit: http://www.acmesystems.it/foxg20
- */
-
-
-static void __init foxg20_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata foxg20_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata foxg20_udc_data = {
-	.vbus_pin	= AT91_PIN_PC6,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info foxg20_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
-	{
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata foxg20_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA7,
-	.is_rmii	= 1,
-};
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata foxg20_mci0_data = {
-	.slot[1] = {
-		.bus_width	= 4,
-		.detect_pin	= -EINVAL,
-		.wp_pin		= -EINVAL,
-	},
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led foxg20_leds[] = {
-	{	/* user led, red */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PC7,
-		.active_low		= 0,
-		.default_trigger	= "heartbeat",
-	},
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button foxg20_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PC4,
-		.code		= BTN_1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data foxg20_button_data = {
-	.buttons	= foxg20_buttons,
-	.nbuttons	= ARRAY_SIZE(foxg20_buttons),
-};
-
-static struct platform_device foxg20_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &foxg20_button_data,
-	}
-};
-
-static void __init foxg20_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PC4, 1);	/* btn1 */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&foxg20_button_device);
-}
-#else
-static void __init foxg20_add_device_buttons(void) {}
-#endif
-
-
-#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
-	.pin		= AT91_PIN_PB16,
-	.is_open_drain  = 1,
-	.ext_pullup_enable_pin	= -EINVAL,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void __init at91_add_device_w1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-#endif
-
-
-static struct i2c_board_info __initdata foxg20_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-	},
-};
-
-
-static void __init foxg20_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1,
-				ATMEL_UART_CTS
-				| ATMEL_UART_RTS
-				| ATMEL_UART_DTR
-				| ATMEL_UART_DSR
-				| ATMEL_UART_DCD
-				| ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART2 on ttyS3. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US3, 4,
-		ATMEL_UART_CTS
-		| ATMEL_UART_RTS);
-
-	/* USART4 on ttyS5. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
-	/* USART5 on ttyS6. (Rx & Tx only) */
-	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* Set the internal pull-up resistor on DRXD */
-	at91_set_A_periph(AT91_PIN_PB14, 1);
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&foxg20_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&foxg20_udc_data);
-	/* SPI */
-	at91_add_device_spi(foxg20_spi_devices, ARRAY_SIZE(foxg20_spi_devices));
-	/* Ethernet */
-	at91_add_device_eth(&foxg20_macb_data);
-	/* MMC */
-	at91_add_device_mci(0, &foxg20_mci0_data);
-	/* I2C */
-	at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices));
-	/* LEDs */
-	at91_gpio_leds(foxg20_leds, ARRAY_SIZE(foxg20_leds));
-	/* Push Buttons */
-	foxg20_add_device_buttons();
-#if defined(CONFIG_W1_MASTER_GPIO) || defined(CONFIG_W1_MASTER_GPIO_MODULE)
-	at91_add_device_w1();
-#endif
-}
-
-MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
-	/* Maintainer: Sergio Tanzilli */
-	.init_time	= at91sam926x_pit_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= foxg20_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= foxg20_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
deleted file mode 100644
index f28e8b74df4b..000000000000
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * board-rsi-ews.c
- *
- *  Copyright (C)
- *  2005 SAN People,
- *  2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include <linux/gpio.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init rsi_ews_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-}
-
-/*
- * Ethernet
- */
-static struct macb_platform_data rsi_ews_eth_data __initdata = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
-	.ports		= 1,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * SD/MC
- */
-static struct mci_platform_data __initdata rsi_ews_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PB27,
-		.wp_pin		= AT91_PIN_PB29,
-	},
-};
-
-/*
- * I2C
- */
-static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-	{
-		I2C_BOARD_INFO("24c01", 0x50),
-	}
-};
-
-/*
- * LEDs
- */
-static struct gpio_led rsi_ews_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB6,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led1",
-		.gpio			= AT91_PIN_PB7,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led2",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 0,
-	},
-	{
-		.name			= "led3",
-		.gpio			= AT91_PIN_PB9,
-		.active_low		= 0,
-	},
-};
-
-/*
- * DataFlash
- */
-static struct spi_board_info rsi_ews_spi_devices[] = {
-	{	/* DataFlash chip 1*/
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 5 * 1000 * 1000,
-	},
-	{	/* DataFlash chip 2*/
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 5 * 1000 * 1000,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct mtd_partition rsiews_nor_partitions[] = {
-	{
-		.name		= "boot",
-		.offset		= 0,
-		.size		= 3 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_2M - (3 * SZ_128K)
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_8M
-	},
-	{
-		.name		= "kernelupd",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 3 * SZ_512K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-	{
-		.name		= "rootupd",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= 9 * SZ_512K,
-		.mask_flags	= MTD_WRITEABLE
-	},
-};
-
-static struct physmap_flash_data rsiews_nor_data = {
-	.width		= 2,
-	.parts		= rsiews_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(rsiews_nor_partitions),
-};
-
-#define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	SZ_16M
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= NOR_BASE,
-		.end	= NOR_BASE + NOR_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device rsiews_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &rsiews_nor_data,
-	},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-/*
- * Init Func
- */
-static void __init rsi_ews_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	/* This one is for debugging */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	/* Dialin/-out modem interface */
-	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART3 on ttyS4. (Rx, Tx, RTS) */
-	/* RS485 communication */
-	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-	at91_add_device_serial();
-	at91_set_gpio_output(AT91_PIN_PA21, 0);
-	/* Ethernet */
-	at91_add_device_eth(&rsi_ews_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&rsi_ews_usbh_data);
-	/* I2C */
-	at91_add_device_i2c(rsi_ews_i2c_devices,
-			ARRAY_SIZE(rsi_ews_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(rsi_ews_spi_devices,
-			ARRAY_SIZE(rsi_ews_spi_devices));
-	/* MMC */
-	at91_add_device_mci(0, &rsi_ews_mci0_data);
-	/* NOR Flash */
-	platform_device_register(&rsiews_nor_flash);
-	/* LEDs */
-	at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
-}
-
-MACHINE_START(RSI_EWS, "RSI EWS")
-	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.init_time	= at91rm9200_timer_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= rsi_ews_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= rsi_ews_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 3d192c5aee66..cdb3ec9efd2b 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -48,11 +48,6 @@ void __iomem *at91_aic_base;
 static struct irq_domain *at91_aic_domain;
 static struct device_node *at91_aic_np;
 static unsigned int n_irqs = NR_AIC_IRQS;
-static unsigned long at91_aic_caps = 0;
-
-/* AIC5 introduces a Source Select Register */
-#define AT91_AIC_CAP_AIC5	(1 << 0)
-#define has_aic5()		(at91_aic_caps & AT91_AIC_CAP_AIC5)
 
 #ifdef CONFIG_PM
 
@@ -92,50 +87,14 @@ static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 
 void at91_irq_suspend(void)
 {
-	int bit = -1;
-
-	if (has_aic5()) {
-		/* disable enabled irqs */
-		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
-			at91_aic_write(AT91_AIC5_SSR,
-				       bit & AT91_AIC5_INTSEL_MSK);
-			at91_aic_write(AT91_AIC5_IDCR, 1);
-		}
-		/* enable wakeup irqs */
-		bit = -1;
-		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
-			at91_aic_write(AT91_AIC5_SSR,
-				       bit & AT91_AIC5_INTSEL_MSK);
-			at91_aic_write(AT91_AIC5_IECR, 1);
-		}
-	} else {
-		at91_aic_write(AT91_AIC_IDCR, *backups);
-		at91_aic_write(AT91_AIC_IECR, *wakeups);
-	}
+	at91_aic_write(AT91_AIC_IDCR, *backups);
+	at91_aic_write(AT91_AIC_IECR, *wakeups);
 }
 
 void at91_irq_resume(void)
 {
-	int bit = -1;
-
-	if (has_aic5()) {
-		/* disable wakeup irqs */
-		while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
-			at91_aic_write(AT91_AIC5_SSR,
-				       bit & AT91_AIC5_INTSEL_MSK);
-			at91_aic_write(AT91_AIC5_IDCR, 1);
-		}
-		/* enable irqs disabled for suspend */
-		bit = -1;
-		while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
-			at91_aic_write(AT91_AIC5_SSR,
-				       bit & AT91_AIC5_INTSEL_MSK);
-			at91_aic_write(AT91_AIC5_IECR, 1);
-		}
-	} else {
-		at91_aic_write(AT91_AIC_IDCR, *wakeups);
-		at91_aic_write(AT91_AIC_IECR, *backups);
-	}
+	at91_aic_write(AT91_AIC_IDCR, *wakeups);
+	at91_aic_write(AT91_AIC_IECR, *backups);
 }
 
 #else
@@ -169,21 +128,6 @@ at91_aic_handle_irq(struct pt_regs *regs)
 		handle_IRQ(irqnr, regs);
 }
 
-asmlinkage void __exception_irq_entry
-at91_aic5_handle_irq(struct pt_regs *regs)
-{
-	u32 irqnr;
-	u32 irqstat;
-
-	irqnr = at91_aic_read(AT91_AIC5_IVR);
-	irqstat = at91_aic_read(AT91_AIC5_ISR);
-
-	if (!irqstat)
-		at91_aic_write(AT91_AIC5_EOICR, 0);
-	else
-		handle_IRQ(irqnr, regs);
-}
-
 static void at91_aic_mask_irq(struct irq_data *d)
 {
 	/* Disable interrupt on AIC */
@@ -192,15 +136,6 @@ static void at91_aic_mask_irq(struct irq_data *d)
 	clear_backup(d->hwirq);
 }
 
-static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d)
-{
-	/* Disable interrupt on AIC5 */
-	at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK);
-	at91_aic_write(AT91_AIC5_IDCR, 1);
-	/* Update ISR cache */
-	clear_backup(d->hwirq);
-}
-
 static void at91_aic_unmask_irq(struct irq_data *d)
 {
 	/* Enable interrupt on AIC */
@@ -209,15 +144,6 @@ static void at91_aic_unmask_irq(struct irq_data *d)
 	set_backup(d->hwirq);
 }
 
-static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d)
-{
-	/* Enable interrupt on AIC5 */
-	at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK);
-	at91_aic_write(AT91_AIC5_IECR, 1);
-	/* Update ISR cache */
-	set_backup(d->hwirq);
-}
-
 static void at91_aic_eoi(struct irq_data *d)
 {
 	/*
@@ -227,11 +153,6 @@ static void at91_aic_eoi(struct irq_data *d)
 	at91_aic_write(AT91_AIC_EOICR, 0);
 }
 
-static void __maybe_unused at91_aic5_eoi(struct irq_data *d)
-{
-	at91_aic_write(AT91_AIC5_EOICR, 0);
-}
-
 static unsigned long *at91_extern_irq;
 
 u32 at91_get_extern_irq(void)
@@ -282,16 +203,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
 	if (srctype < 0)
 		return srctype;
 
-	if (has_aic5()) {
-		at91_aic_write(AT91_AIC5_SSR,
-			       d->hwirq & AT91_AIC5_INTSEL_MSK);
-		smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE;
-		at91_aic_write(AT91_AIC5_SMR, smr | srctype);
-	} else {
-		smr = at91_aic_read(AT91_AIC_SMR(d->hwirq))
-		      & ~AT91_AIC_SRCTYPE;
-		at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
-	}
+	smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
+	at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
 
 	return 0;
 }
@@ -331,177 +244,6 @@ static void __init at91_aic_hw_init(unsigned int spu_vector)
 	at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
 }
 
-static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector)
-{
-	int i;
-
-	/*
-	 * Perform 8 End Of Interrupt Command to make sure AIC
-	 * will not Lock out nIRQ
-	 */
-	for (i = 0; i < 8; i++)
-		at91_aic_write(AT91_AIC5_EOICR, 0);
-
-	/*
-	 * Spurious Interrupt ID in Spurious Vector Register.
-	 * When there is no current interrupt, the IRQ Vector Register
-	 * reads the value stored in AIC_SPU
-	 */
-	at91_aic_write(AT91_AIC5_SPU, spu_vector);
-
-	/* No debugging in AIC: Debug (Protect) Control Register */
-	at91_aic_write(AT91_AIC5_DCR, 0);
-
-	/* Disable and clear all interrupts initially */
-	for (i = 0; i < n_irqs; i++) {
-		at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK);
-		at91_aic_write(AT91_AIC5_IDCR, 1);
-		at91_aic_write(AT91_AIC5_ICCR, 1);
-	}
-}
-
-#if defined(CONFIG_OF)
-static unsigned int *at91_aic_irq_priorities;
-
-static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	/* Put virq number in Source Vector Register */
-	at91_aic_write(AT91_AIC_SVR(hw), virq);
-
-	/* Active Low interrupt, with priority */
-	at91_aic_write(AT91_AIC_SMR(hw),
-		       AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]);
-
-	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
-	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
-	return 0;
-}
-
-static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq,
-		irq_hw_number_t hw)
-{
-	at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK);
-
-	/* Put virq number in Source Vector Register */
-	at91_aic_write(AT91_AIC5_SVR, virq);
-
-	/* Active Low interrupt, with priority */
-	at91_aic_write(AT91_AIC5_SMR,
-		       AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]);
-
-	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
-	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
-	return 0;
-}
-
-static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr,
-				const u32 *intspec, unsigned int intsize,
-				irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	if (WARN_ON(intsize < 3))
-		return -EINVAL;
-	if (WARN_ON(intspec[0] >= n_irqs))
-		return -EINVAL;
-	if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY)
-		    || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY)))
-		return -EINVAL;
-
-	*out_hwirq = intspec[0];
-	*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
-	at91_aic_irq_priorities[*out_hwirq] = intspec[2];
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_aic_irq_ops = {
-	.map	= at91_aic_irq_map,
-	.xlate	= at91_aic_irq_domain_xlate,
-};
-
-int __init at91_aic_of_common_init(struct device_node *node,
-				    struct device_node *parent)
-{
-	struct property *prop;
-	const __be32 *p;
-	u32 val;
-
-	at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
-				  * sizeof(*at91_extern_irq), GFP_KERNEL);
-	if (!at91_extern_irq)
-		return -ENOMEM;
-
-	if (at91_aic_pm_init()) {
-		kfree(at91_extern_irq);
-		return -ENOMEM;
-	}
-
-	at91_aic_irq_priorities = kzalloc(n_irqs
-					  * sizeof(*at91_aic_irq_priorities),
-					  GFP_KERNEL);
-	if (!at91_aic_irq_priorities)
-		return -ENOMEM;
-
-	at91_aic_base = of_iomap(node, 0);
-	at91_aic_np = node;
-
-	at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs,
-						&at91_aic_irq_ops, NULL);
-	if (!at91_aic_domain)
-		panic("Unable to add AIC irq domain (DT)\n");
-
-	of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) {
-		if (val >= n_irqs)
-			pr_warn("AIC: external irq %d >= %d skip it\n",
-				val, n_irqs);
-		else
-			set_bit(val, at91_extern_irq);
-	}
-
-	irq_set_default_host(at91_aic_domain);
-
-	return 0;
-}
-
-int __init at91_aic_of_init(struct device_node *node,
-				     struct device_node *parent)
-{
-	int err;
-
-	err = at91_aic_of_common_init(node, parent);
-	if (err)
-		return err;
-
-	at91_aic_hw_init(n_irqs);
-
-	return 0;
-}
-
-int __init at91_aic5_of_init(struct device_node *node,
-				     struct device_node *parent)
-{
-	int err;
-
-	at91_aic_caps |= AT91_AIC_CAP_AIC5;
-	n_irqs = NR_AIC5_IRQS;
-	at91_aic_chip.irq_ack           = at91_aic5_mask_irq;
-	at91_aic_chip.irq_mask		= at91_aic5_mask_irq;
-	at91_aic_chip.irq_unmask	= at91_aic5_unmask_irq;
-	at91_aic_chip.irq_eoi		= at91_aic5_eoi;
-	at91_aic_irq_ops.map		= at91_aic5_irq_map;
-
-	err = at91_aic_of_common_init(node, parent);
-	if (err)
-		return err;
-
-	at91_aic5_hw_init(n_irqs);
-
-	return 0;
-}
-#endif
-
 /*
  * Initialize the AIC interrupt controller.
  */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e95554532987..5920373809c5 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -206,16 +206,19 @@ static int at91_pm_enter(suspend_state_t state)
 		at91_pinctrl_gpio_suspend();
 	else
 		at91_gpio_suspend();
-	at91_irq_suspend();
 
-	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
-			/* remember all the always-wake irqs */
-			(at91_pmc_read(AT91_PMC_PCSR)
-					| (1 << AT91_ID_FIQ)
-					| (1 << AT91_ID_SYS)
-					| (at91_get_extern_irq()))
-				& at91_aic_read(AT91_AIC_IMR),
-			state);
+	if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) {
+		at91_irq_suspend();
+
+		pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
+				/* remember all the always-wake irqs */
+				(at91_pmc_read(AT91_PMC_PCSR)
+						| (1 << AT91_ID_FIQ)
+						| (1 << AT91_ID_SYS)
+						| (at91_get_extern_irq()))
+					& at91_aic_read(AT91_AIC_IMR),
+				state);
+	}
 
 	switch (state) {
 		/*
@@ -280,12 +283,17 @@ static int at91_pm_enter(suspend_state_t state)
 			goto error;
 	}
 
-	pr_debug("AT91: PM - wakeup %08x\n",
-			at91_aic_read(AT91_AIC_IPR) & at91_aic_read(AT91_AIC_IMR));
+	if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
+		pr_debug("AT91: PM - wakeup %08x\n",
+			 at91_aic_read(AT91_AIC_IPR) &
+			 at91_aic_read(AT91_AIC_IMR));
 
 error:
 	target_state = PM_SUSPEND_ON;
-	at91_irq_resume();
+
+	if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
+		at91_irq_resume();
+
 	if (of_have_populated_dt())
 		at91_pinctrl_gpio_resume();
 	else
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7a07a58ebb6..0bf893a574f9 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -49,7 +49,8 @@ void __init at91_init_irq_default(void)
 void __init at91_init_interrupts(unsigned int *priority)
 {
 	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority, at91_boot_soc.extern_irq);
+	if (IS_ENABLED(CONFIG_OLD_IRQ_AT91))
+		at91_aic_init(priority, at91_boot_soc.extern_irq);
 
 	/* Enable GPIO interrupts */
 	at91_gpio_irq_setup();
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 2a6323b15782..671acc5a3282 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -19,29 +19,17 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/io.h>
+
 #include <linux/init.h>
 #include <linux/sizes.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
-#include <linux/sched_clock.h>
 
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
 
 #include "common.h"
 
-static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
-		  *clk_tint, *clk_spi;
-
 /*
  * This maps the generic CLPS711x registers
  */
@@ -64,129 +52,11 @@ void __init clps711x_init_irq(void)
 	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
 }
 
-static u64 notrace clps711x_sched_clock_read(void)
-{
-	return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D);
-}
-
-static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
-{
-	disable_irq(IRQ_TC2OI);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		enable_irq(IRQ_TC2OI);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Not supported */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_clps711x = {
-	.name		= "clps711x-clockevent",
-	.rating		= 300,
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= clps711x_clockevent_set_mode,
-};
-
-static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
-{
-	clockevent_clps711x.event_handler(&clockevent_clps711x);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction clps711x_timer_irq = {
-	.name		= "clps711x-timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= clps711x_timer_interrupt,
-};
-
-static void add_fixed_clk(struct clk *clk, const char *name, int rate)
-{
-	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
-	clk_register_clkdev(clk, name, NULL);
-}
-
 void __init clps711x_timer_init(void)
 {
-	int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
-	u32 tmp;
-
-	osc = 3686400;
-	ext = 13000000;
-
-	tmp = clps_readl(PLLR) >> 24;
-	if (tmp)
-		pll = (osc * tmp) / 2;
-	else
-		pll = 73728000; /* Default value */
-
-	tmp = clps_readl(SYSFLG2);
-	if (tmp & SYSFLG2_CKMODE) {
-		cpu = ext;
-		bus = cpu;
-		spi = 135400;
-		pll = 0;
-	} else {
-		cpu = pll;
-		if (cpu >= 36864000)
-			bus = cpu / 2;
-		else
-			bus = 36864000 / 2;
-		spi = cpu / 576;
-	}
-
-	uart = bus / 10;
-
-	if (tmp & SYSFLG2_CKMODE) {
-		tmp = clps_readl(SYSCON2);
-		if (tmp & SYSCON2_OSTB)
-			timh = ext / 26;
-		else
-			timh = 541440;
-	} else
-		timh = DIV_ROUND_CLOSEST(cpu, 144);
-
-	timl = DIV_ROUND_CLOSEST(timh, 256);
-
-	/* All clocks are fixed */
-	add_fixed_clk(clk_pll, "pll", pll);
-	add_fixed_clk(clk_bus, "bus", bus);
-	add_fixed_clk(clk_uart, "uart", uart);
-	add_fixed_clk(clk_timerl, "timer_lf", timl);
-	add_fixed_clk(clk_timerh, "timer_hf", timh);
-	add_fixed_clk(clk_tint, "tint", 64);
-	add_fixed_clk(clk_spi, "spi", spi);
-
-	pr_info("CPU frequency set at %i Hz.\n", cpu);
-
-	/* Start Timer1 in free running mode (Low frequency) */
-	tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M);
-	clps_writel(tmp, SYSCON1);
-
-	sched_clock_register(clps711x_sched_clock_read, 16, timl);
-
-	clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D,
-			      "clps711x_clocksource", timl, 300, 16,
-			      clocksource_mmio_readw_down);
-
-	/* Set Timer2 prescaler */
-	clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D);
-
-	/* Start Timer2 in prescale mode (High frequency)*/
-	tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S;
-	clps_writel(tmp, SYSCON1);
-
-	clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0);
-
-	setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+	clps711x_clk_init(CLPS711X_VIRT_BASE);
+	clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D,
+			     CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI);
 }
 
 void clps711x_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index f88189963898..370200b26333 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -16,3 +16,8 @@ extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
 
 /* drivers/irqchip/irq-clps711x.c */
 void clps711x_intc_init(phys_addr_t, resource_size_t);
+/* drivers/clk/clk-clps711x.c */
+void clps711x_clk_init(void __iomem *base);
+/* drivers/clocksource/clps711x-timer.c */
+void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
+			  unsigned int irq);
diff --git a/arch/arm/mach-exynos/include/mach/memory.h b/arch/arm/mach-exynos/include/mach/memory.h
deleted file mode 100644
index e19df1f18c0d..000000000000
--- a/arch/arm/mach-exynos/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET		UL(0x40000000)
-
-#ifndef CONFIG_ARM_LPAE
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-#else
-#define MAX_PHYSMEM_BITS	36
-#define SECTION_SIZE_BITS	31
-#endif
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index a9f1cf759949..41ae28d69e6f 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -224,7 +224,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 				ret = PTR_ERR(boot_reg);
 				goto fail;
 			}
-			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+			__raw_writel(boot_addr, boot_reg);
 		}
 
 		call_firmware_op(cpu_boot, core_id);
@@ -313,7 +313,7 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 
 			if (IS_ERR(boot_reg))
 				break;
-			__raw_writel(boot_addr, cpu_boot_reg(core_id));
+			__raw_writel(boot_addr, boot_reg);
 		}
 	}
 }
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index be9a51afe05a..4e9b4f63d42b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -108,17 +108,6 @@ config SOC_IMX35
 if ARCH_MULTI_V4T
 
 comment "MX1 platforms:"
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select MACH_MXLADS
-	select SOC_IMX1
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
 config MACH_SCB9328
 	bool "Synertronixx scb9328"
@@ -223,86 +212,6 @@ config MACH_MX27ADS
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX27
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	bool "PHYTEC PCM970 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX27
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27
-	  for wifi or eMMC.
-
-config MACH_EUKREA_CPUIMX27_USEUART4
-	bool "CPUIMX27 integrates UART4 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal UART4 used on CPUIMX27
-	  for bluetooth.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	bool "Eukrea MBIMX27 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -359,18 +268,6 @@ config MACH_PCA100
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select SOC_IMX27
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 23c02932bf84..4147729775d2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -41,7 +41,6 @@ obj-y += ssi-fiq-ksym.o
 endif
 
 # i.MX1 based machines
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
@@ -56,14 +55,9 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
 
 # i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
 
 # i.MX31 based machines
diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h
deleted file mode 100644
index 6f371e35753d..000000000000
--- a/arch/arm/mach-imx/board-pcm038.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 22ba8973bcb9..1dabf435c592 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -98,11 +98,9 @@ void imx_set_cpu_arg(int cpu, u32 arg);
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
 void imx_smp_prepare(void);
-void imx_scu_standby_enable(void);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
-static inline void imx_scu_standby_enable(void) {}
 #endif
 void imx_src_init(void);
 void imx_gpc_init(void);
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 10844d3bb926..aa935787b743 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -66,10 +66,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 
 int __init imx6q_cpuidle_init(void)
 {
-	/* Need to enable SCU standby for entering WAIT modes */
-	if (!cpu_is_imx6sx())
-		imx_scu_standby_enable();
-
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
 	imx6q_set_int_mem_clk_lpm(true);
 
diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
index a21d3313f994..bb2c90d65914 100644
--- a/arch/arm/mach-imx/eukrea-baseboards.h
+++ b/arch/arm/mach-imx/eukrea-baseboards.h
@@ -27,23 +27,15 @@
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
- * or eukrea_cpuimx51sd_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
  *
  * This example here is for the development board. Refer
  * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
  * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
- * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
  */
 
 extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimx27_baseboard_init(void);
 extern void eukrea_mbimxsd35_baseboard_init(void);
-extern void eukrea_mbimx51_baseboard_init(void);
-extern void eukrea_mbimxsd51_baseboard_init(void);
 
 #endif
 
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index b2f08bfbbdd3..000000000000
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/backlight.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int eukrea_mbimx27_pins[] __initconst = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI4 */
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD | GPIO_PUEN,
-	PC18_PF_SSI4_TXD | GPIO_PUEN,
-	PC19_PF_SSI4_CLK,
-#endif
-};
-
-static const uint32_t eukrea_mbimx27_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-};
-
-static const struct matrix_keymap_data
-eukrea_mbimx27_keymap_data __initconst = {
-	.keymap         = eukrea_mbimx27_keymap,
-	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
-};
-
-static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimx27_gpio_led_info __initconst = {
-	.leds		= eukrea_mbimx27_gpio_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimx27_bl_set_intensity(int intensity)
-{
-	if (intensity)
-		gpio_direction_output(GPIO_PORTE | 5, 1);
-	else
-		gpio_direction_output(GPIO_PORTE | 5, 0);
-}
-
-static struct generic_bl_info eukrea_mbimx27_bl_info = {
-	.name			= "eukrea_mbimx27-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimx27_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data	= &eukrea_mbimx27_bl_info,
-	},
-};
-
-static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_PORTA | 25, 1);
-	else
-		gpio_direction_output(GPIO_PORTA | 25, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
-	.set_power		= eukrea_mbimx27_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimx27_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-		return;
-	}
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info __maybe_unused
-		eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		/* irq number is run-time assigned */
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-
-static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.dat3_card_detect = 1,
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
-	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc_pdata);
-
-	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
-
-	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* ADS7846 Touchscreen controller init */
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	ads7846_dev_init();
-#endif
-
-	/* SPI_CS0 init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
-	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTE | 5, "backlight");
-	platform_device_register(&eukrea_mbimx27_bl_dev);
-	/* LCD Reset */
-	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTA | 25, "lcd_enable");
-	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
-
-	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
-
-	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
-	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 7c66805d2cc0..1657fe64cd0f 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -64,7 +64,6 @@ int mxc_iomux_mode(unsigned int pin_mode)
 
 	return ret;
 }
-EXPORT_SYMBOL(mxc_iomux_mode);
 
 /*
  * This function configures the pad value for a IOMUX pin.
@@ -90,7 +89,6 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 
 	spin_unlock(&gpio_mux_lock);
 }
-EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
  * allocs a single pin:
@@ -116,7 +114,6 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -137,7 +134,6 @@ setup_error:
 	mxc_iomux_release_multiple_pins(pin_list, i);
 	return ret;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
 void mxc_iomux_release_pin(unsigned int pin)
 {
@@ -146,7 +142,6 @@ void mxc_iomux_release_pin(unsigned int pin)
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
 }
-EXPORT_SYMBOL(mxc_iomux_release_pin);
 
 void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
@@ -158,7 +153,6 @@ void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 		p++;
 	}
 }
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
 
 /*
  * This function enables/disables the general purpose function for a particular
@@ -178,4 +172,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	__raw_writel(l, IOMUXGPR);
 	spin_unlock(&gpio_mux_lock);
 }
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
index 2b156d1d9e21..ecd543664644 100644
--- a/arch/arm/mach-imx/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -153,7 +153,6 @@ int mxc_gpio_mode(int gpio_mode)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_gpio_mode);
 
 static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 {
@@ -178,7 +177,6 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 	ret = imx_iomuxv1_setup_multiple(pin_list, count);
 	return ret;
 }
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
 int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index 9dae74bf47fc..d61f9606fc56 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -55,7 +55,6 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
 
 int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
 {
@@ -71,7 +70,6 @@ int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644
index e6d4b9929571..000000000000
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-	/* OTG */
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= eukrea_cpuimx27_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= eukrea_cpuimx27_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	/* in which case UART4 is also used for Bluetooth */
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
-	serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
-	serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
-	serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
-	platform_device_register(&serial_device);
-#endif
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	} else {
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= eukrea_cpuimx27_timer_init,
-	.init_machine = eukrea_cpuimx27_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
deleted file mode 100644
index 77fda3de4290..000000000000
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * arch/arm/mach-imx/mach-mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int mx1ads_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-	/* SPI */
-	PC13_PF_SPI1_SPI_RDY,
-	PC14_PF_SPI1_SCLK,
-	PC15_PF_SPI1_SS,
-	PC16_PF_SPI1_MISO,
-	PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-       
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Physmap flash
- */
-
-static const struct physmap_flash_data mx1ads_flash_data __initconst = {
-	.width		= 4,		/* bankwidth in bytes */
-};
-
-static const struct resource flash_resource __initconst = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
-	{
-		.gpio_base = 4 * 32,
-	}, {
-		.gpio_base = 4 * 32 + 16,
-	}
-};
-
-static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x22),
-		.platform_data = &pcf857x_data[0],
-	}, {
-		I2C_BOARD_INFO("pcf8575", 0x24),
-		.platform_data = &pcf857x_data[1],
-	},
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx1ads_pins,
-		ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
-	/* UART */
-	imx1_add_imx_uart0(&uart0_pdata);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	/* Physmap flash */
-	platform_device_register_resndata(NULL, "physmap-flash", 0,
-			&flash_resource, 1,
-			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
-
-	/* I2C */
-	i2c_register_board_info(0, mx1ads_i2c_devices,
-				ARRAY_SIZE(mx1ads_i2c_devices));
-
-	imx1_add_imx_i2c(&mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= mx1ads_timer_init,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= mx1ads_timer_init,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
deleted file mode 100644
index 0b5d1ca31b9f..000000000000
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/pca953x.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mxt_td60_pins[] __initconst = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA25_PF_CLS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	PF8_AF_ATA_IORDY,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mxt_td60_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
-				unsigned gpio_base, unsigned ngpio,
-				void *context)
-{
-	static int mxt_td60_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
-		if (mxt_td60_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-						mxt_td60_gpio_value[n]);
-		gpio_export(gpio_base + n, 0);
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
-	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
-	.invert		= 0, /* Do not invert */
-	.setup		= mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9557", 0x18),
-		.platform_data = &mxt_td60_pca9557_pdata,
-	},
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
-	{
-		.mode = {
-			.name		= "Chimei LW700AT9003",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 480,
-			.pixclock	= 30303,
-			.hsync_len	= 64,
-			.left_margin	= 0x67,
-			.right_margin	= 0x68,
-			.vsync_len	= 16,
-			.upper_margin	= 0x0f,
-			.lower_margin	= 0x0f,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFA208B83,
-	},
-};
-
-static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
-	.mode = mxt_td60_modes,
-	.num_modes = ARRAY_SIZE(mxt_td60_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
-			   IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.init = mxt_td60_sdhc1_init,
-	.exit = mxt_td60_sdhc1_exit,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mxt_td60_board_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
-			"MXT_TD60");
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
-
-	i2c_register_board_info(0, mxt_td60_i2c_devices,
-				ARRAY_SIZE(mxt_td60_i2c_devices));
-
-	i2c_register_board_info(1, mxt_td60_i2c2_devices,
-				ARRAY_SIZE(mxt_td60_i2c2_devices));
-
-	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
-	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
-	imx27_add_imx_fb(&mxt_td60_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
-	imx27_add_fec(NULL);
-}
-
-static void __init mxt_td60_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
-	/* maintainer: Maxtrack Industrial */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= mxt_td60_timer_init,
-	.init_machine = mxt_td60_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
deleted file mode 100644
index ee862ad6b6fc..000000000000
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "board-pcm038.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int pcm038_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SSI4 */
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD,
-	PC18_PF_SSI4_TXD,
-	PC19_PF_SSI4_CLK,
-	/* USB host */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX27_CS1_BASE_ADDR,
-	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
-	.width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc1ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pcm038_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&pcm038_nor_mtd_device,
-	&pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
-	__raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
-	__raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
-	__raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
-}
-
-static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static const struct spi_imx_master pcm038_spi0_data __initconst = {
-	.chipselect = pcm038_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
-	{
-		.dev_name = "imx21-mmc.1",
-		.supply	= "sdhc_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc1_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
-	.consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev_name = NULL,
-		.supply	= "imx_cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
-	{
-		.id = MC13783_REG_VCAM,
-		.init_data = &cam_data,
-	}, {
-		.id = MC13783_REG_VMMC1,
-		.init_data = &sdhc1_data,
-	},
-};
-
-static struct mc13xxx_platform_data pcm038_pmic = {
-	.regulators = {
-		.regulators = pcm038_regulators,
-		.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	},
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		/* irq number is run-time assigned */
-		.max_speed_hz = 300000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &pcm038_pmic,
-		.mode = SPI_CS_HIGH,
-	}
-};
-
-static int pcm038_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= pcm038_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static void __init pcm038_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
-			"PCM038");
-
-	pcm038_init_sram();
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-
-	mxc_gpio_mode(PE16_AF_OWIRE);
-	imx27_add_mxc_nand(&pcm038_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pcm038_i2c_devices,
-				ARRAY_SIZE(pcm038_i2c_devices));
-
-	imx27_add_imx_i2c(1, &pcm038_i2c1_data);
-
-	/* PE18 for user-LED D40 */
-	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
-	/* MC13783 IRQ */
-	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
-	imx27_add_spi_imx0(&pcm038_spi0_data);
-	pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
-	spi_register_board_info(pcm038_spi_board_info,
-				ARRAY_SIZE(pcm038_spi_board_info));
-
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
-	pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= pcm038_timer_init,
-	.init_machine = pcm038_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
deleted file mode 100644
index 51c608234089..000000000000
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int pcm970_pins[] __initconst = {
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/*
-	 * it seems the data line misses a pullup, so we must enable
-	 * the internal pullup as a local workaround
-	 */
-	PD17_PF_I2C_DATA | GPIO_PUEN,
-	PD18_PF_I2C_CLK,
-	/* Camera */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-};
-
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
-			  IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
-	if (ret)
-		return ret;
-
-	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret) {
-		free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-		return ret;
-	}
-
-	gpio_direction_input(GPIO_PORTC + 28);
-
-	return 0;
-}
-
-static void pcm970_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-	gpio_free(GPIO_PORTC + 28);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.get_ro = pcm970_sdhc2_get_ro,
-	.init = pcm970_sdhc2_init,
-	.exit = pcm970_sdhc2_exit,
-};
-
-static struct imx_fb_videomode pcm970_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 7,
-			.left_margin	= 5,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		/*
-		 * - HSYNC active high
-		 * - VSYNC active high
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr		= 0xF00080C0,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "TX090",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 38255,
-			.left_margin	= 144,
-			.right_margin	= 0,
-			.upper_margin	= 7,
-			.lower_margin	= 40,
-			.hsync_len	= 96,
-			.vsync_len	= 1,
-		},
-		/*
-		 * - HSYNC active low (1 << 22)
-		 * - VSYNC active low (1 << 23)
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
-		.bpp = 32,
-	},
-};
-
-static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
-	.mode = pcm970_modes,
-	.num_modes = ARRAY_SIZE(pcm970_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX27_CS4_BASE_ADDR,
-		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm038 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm970_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
-			"PCM970");
-
-	imx27_add_imx_fb(&pcm038_fb_data);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-	pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
-	pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
-	platform_device_register(&pcm970_sja1000);
-}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 5b57c17c06bd..771bd25c1025 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -20,8 +20,6 @@
 #include "common.h"
 #include "hardware.h"
 
-#define SCU_STANDBY_ENABLE	(1 << 5)
-
 u32 g_diag_reg;
 static void __iomem *scu_base;
 
@@ -45,14 +43,6 @@ void __init imx_scu_map_io(void)
 	scu_base = IMX_IO_ADDRESS(base);
 }
 
-void imx_scu_standby_enable(void)
-{
-	u32 val = readl_relaxed(scu_base);
-
-	val |= SCU_STANDBY_ENABLE;
-	writel_relaxed(val, scu_base);
-}
-
 static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
deleted file mode 100644
index 873c3ca3cd7e..000000000000
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/mach-msm/board-mahimahi.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Copyright (C) 2009 HTC Corporation.
- * Author: Dima Zavin <dima@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-
-#include "board-mahimahi.h"
-#include "devices.h"
-#include "proc_comm.h"
-#include "common.h"
-
-static uint debug_uart;
-
-module_param_named(debug_uart, debug_uart, uint, 0);
-
-static struct platform_device *devices[] __initdata = {
-#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
-	&msm_device_uart1,
-#endif
-	&msm_device_uart_dm1,
-	&msm_device_nand,
-};
-
-static void __init mahimahi_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init mahimahi_fixup(struct tag *tags, char **cmdline)
-{
-	memblock_add(PHYS_OFFSET, 219*SZ_1M);
-	memblock_add(MSM_HIGHMEM_BASE, MSM_HIGHMEM_SIZE);
-}
-
-static void __init mahimahi_map_io(void)
-{
-	msm_map_common_io();
-	msm_clock_init();
-}
-
-static void __init mahimahi_init_late(void)
-{
-	smd_debugfs_init();
-}
-
-void msm_timer_init(void);
-
-MACHINE_START(MAHIMAHI, "mahimahi")
-	.atag_offset	= 0x100,
-	.fixup		= mahimahi_fixup,
-	.map_io		= mahimahi_map_io,
-	.init_irq	= msm_init_irq,
-	.init_machine	= mahimahi_init,
-	.init_late	= mahimahi_init_late,
-	.init_time	= msm_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 245884319d2e..8f5ecdc4f3ce 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -124,7 +124,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
 static struct platform_device *devices[] __initdata = {
 	&msm_clock_7x30,
 	&msm_device_gpio_7x30,
-#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
+#if defined(CONFIG_SERIAL_MSM)
         &msm_device_uart2,
 #endif
 	&msm_device_smd,
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
index 2c25050209ce..722ad63b7edc 100644
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -94,7 +94,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 	}
 
 static struct msm_gpio_chip msm_gpio_banks[] = {
-#if defined(CONFIG_MSM_DEBUG_UART1)
+#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000)
 	/* H2W pins <-> UART1 */
 	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
 #else
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index f72b07de2152..ba3edd3a46cb 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -88,7 +88,7 @@ static void __init trout_map_io(void)
 	msm_map_common_io();
 	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
 
-#ifdef CONFIG_MSM_DEBUG_UART3
+#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000)
 	/* route UART3 to the "H2W" extended usb connector */
 	writeb(0x80, TROUT_CPLD_BASE + 0x00);
 #endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 34e09474636d..b042dca1f633 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -57,8 +57,7 @@ static struct map_desc msm_io_desc[] __initdata = {
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
 	},
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-		defined(CONFIG_DEBUG_MSM_UART3)
+#if defined(CONFIG_DEBUG_MSM_UART)
 	{
 		/* Must be last: virtual and pfn filled in by debug_ll_addr() */
 		.length = SZ_4K,
@@ -76,8 +75,7 @@ void __init msm_map_common_io(void)
 	 * pages are peripheral interface or not.
 	 */
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-#if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \
-		defined(CONFIG_DEBUG_MSM_UART3)
+#if defined(CONFIG_DEBUG_MSM_UART)
 #ifdef CONFIG_MMU
 	debug_ll_addr(&msm_io_desc[size - 1].pfn,
 		      &msm_io_desc[size - 1].virtual);
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index bf852d7ae951..7a050f9c37ff 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -544,7 +544,7 @@ int omap_dss_reset(struct omap_hwmod *oh)
 			MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("dss_core: waiting for reset to finish failed\n");
+		pr_warn("dss_core: waiting for reset to finish failed\n");
 	else
 		pr_debug("dss_core: softreset done\n");
 
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index f78b4a161959..f3897d82e53e 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -67,8 +67,8 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 			  MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
-			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,
 			 oh->name, c);
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index b456b4471f35..b9d8e47ffe8e 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -99,7 +99,7 @@ int omap_i2c_reset(struct omap_hwmod *oh)
 				MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
 			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 828e0db3d943..8bdf182422bd 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -76,8 +76,8 @@ int omap_msdi_reset(struct omap_hwmod *oh)
 			  MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
-			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,
 			 oh->name, c);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index ac8a249779f2..78064b0d4db5 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -814,7 +814,7 @@ int __init omap_mux_late_init(void)
 			"hwmod_io", omap_mux_late_init);
 
 	if (ret)
-		pr_warning("mux: Failed to setup hwmod io irq %d\n", ret);
+		pr_warn("mux: Failed to setup hwmod io irq %d\n", ret);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 9e91a4e7519a..faa65833a0d4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -769,8 +769,8 @@ static int _init_main_clk(struct omap_hwmod *oh)
 
 	oh->_clk = clk_get(NULL, oh->main_clk);
 	if (IS_ERR(oh->_clk)) {
-		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
-			   oh->name, oh->main_clk);
+		pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+			oh->name, oh->main_clk);
 		return -EINVAL;
 	}
 	/*
@@ -814,8 +814,8 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 
 		c = clk_get(NULL, os->clk);
 		if (IS_ERR(c)) {
-			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
-				   oh->name, os->clk);
+			pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+				oh->name, os->clk);
 			ret = -EINVAL;
 			continue;
 		}
@@ -851,8 +851,8 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = clk_get(NULL, oc->clk);
 		if (IS_ERR(c)) {
-			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
-				   oh->name, oc->clk);
+			pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+				oh->name, oc->clk);
 			ret = -EINVAL;
 			continue;
 		}
@@ -1576,7 +1576,7 @@ static int _init_clkdm(struct omap_hwmod *oh)
 
 	oh->clkdm = clkdm_lookup(oh->clkdm_name);
 	if (!oh->clkdm) {
-		pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
+		pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
 			oh->name, oh->clkdm_name);
 		return 0;
 	}
@@ -1616,7 +1616,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
 	if (!ret)
 		oh->_state = _HWMOD_STATE_CLKS_INITED;
 	else
-		pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
+		pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
 
 	return ret;
 }
@@ -1739,7 +1739,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
 	_disable_clocks(oh);
 
 	if (ret == -EBUSY)
-		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+		pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
 
 	if (!ret) {
 		/*
@@ -1953,8 +1953,8 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 
 	c = _wait_softreset_complete(oh);
 	if (c == MAX_MODULE_SOFTRESET_WAIT) {
-		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
-			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			oh->name, MAX_MODULE_SOFTRESET_WAIT);
 		ret = -ETIMEDOUT;
 		goto dis_opt_clks;
 	} else {
@@ -2618,8 +2618,8 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->rst_lines_cnt == 0) {
 		r = _enable(oh);
 		if (r) {
-			pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
-				   oh->name, oh->_state);
+			pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+				oh->name, oh->_state);
 			return -EINVAL;
 		}
 	}
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 05a8c8b07449..b3d3d30ffba0 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -244,8 +244,8 @@ static void __init nokia_n900_legacy_init(void)
 			/* set IBE to 1 */
 			rx51_secure_update_aux_cr(BIT(6), 0);
 		} else {
-			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
-			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+			pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warn("Thumb binaries may crash randomly without this workaround\n");
 		}
 
 		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 3f80929a5f7e..175564c88a30 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -465,7 +465,7 @@ int __init omap3_pm_init(void)
 	int ret;
 
 	if (!omap3_has_io_chain_ctrl())
-		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+		pr_warn("PM: no software I/O chain control; some wakeups may be lost\n");
 
 	pm_errata_configure();
 
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index 7a42e1960c3b..d3a588cf3a6e 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -20,8 +20,8 @@ static int sr_class3_enable(struct omap_sr *sr)
 	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
-				__func__, sr->name);
+		pr_warn("%s: Curr voltage unknown. Cannot enable %s\n",
+			__func__, sr->name);
 		return -ENODATA;
 	}
 
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 1b91ef0c182a..d7cff2632d1e 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -154,7 +154,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data));
 	if (IS_ERR(pdev))
-		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+		pr_warn("%s: Could not build omap_device for %s: %s\n",
 			__func__, name, oh->name);
 exit:
 	i++;
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index a4628a9e760c..be9ef834fa81 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -198,7 +198,7 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
 		loop_cnt++;
 
 		if (retries_cnt > 10) {
-			pr_warning("%s: Retry count exceeded\n", __func__);
+			pr_warn("%s: Retry count exceeded\n", __func__);
 			return -ETIMEDOUT;
 		}
 
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 3ac8fe1d8213..3783b8625f0f 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -55,7 +55,7 @@ static LIST_HEAD(voltdm_list);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return 0;
 	}
 
@@ -77,7 +77,7 @@ int voltdm_scale(struct voltagedomain *voltdm,
 	unsigned long volt = 0;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
 
@@ -96,8 +96,8 @@ int voltdm_scale(struct voltagedomain *voltdm,
 	}
 
 	if (!volt) {
-		pr_warning("%s: not scaling. OPP voltage for %lu, not found.\n",
-			   __func__, target_volt);
+		pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n",
+			__func__, target_volt);
 		return -EINVAL;
 	}
 
@@ -122,7 +122,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 	unsigned long target_volt;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -152,7 +152,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 				struct omap_volt_data **volt_data)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -180,12 +180,12 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 	int i;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
 
 	if (!voltdm->volt_data) {
-		pr_warning("%s: voltage table does not exist for vdd_%s\n",
+		pr_warn("%s: voltage table does not exist for vdd_%s\n",
 			__func__, voltdm->name);
 		return ERR_PTR(-ENODATA);
 	}
@@ -214,7 +214,7 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 			       struct omap_voltdm_pmic *pmic)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
 
@@ -237,7 +237,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
 				  int voltscale_method)
 {
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -279,7 +279,7 @@ int __init omap_voltage_late_init(void)
 
 		sys_ck = clk_get(NULL, voltdm->sys_clk.name);
 		if (IS_ERR(sys_ck)) {
-			pr_warning("%s: Could not get sys clk.\n", __func__);
+			pr_warn("%s: Could not get sys clk.\n", __func__);
 			return -EINVAL;
 		}
 		voltdm->sys_clk.rate = clk_get_rate(sys_ck);
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index 97d6607d447a..ff0a68cf7439 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -93,8 +93,8 @@ int omap2_wd_timer_reset(struct omap_hwmod *oh)
 		udelay(oh->class->sysc->srst_udelay);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
-			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,
 			 oh->name, c);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 56edeab17b68..09d2a26985da 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -550,7 +550,7 @@ static int __init dns323_identify_rev(void)
 			break;
 	}
 	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n");
 		return DNS323_REV_B1;
 	}
 	writel((3 << 21)	/* phy ID reg */ |
@@ -562,7 +562,7 @@ static int __init dns323_identify_rev(void)
 			break;
 	}
 	if (i >= 1000) {
-		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n");
 		return DNS323_REV_B1;
 	}
 	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
@@ -577,8 +577,8 @@ static int __init dns323_identify_rev(void)
 	case 0x0e10: /* MV88E1118 */
 		return DNS323_REV_C1;
 	default:
-		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
-			   reg & 0xffff);
+		pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+			reg & 0xffff);
 	}
 	return DNS323_REV_B1;
 }
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 6208d125c1b9..12086745c9fd 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
 			gpio_free(TSP2_RTC_GPIO);
 	}
 	if (tsp2_i2c_rtc.irq == 0)
-		pr_warning("tsp2_init: failed to get RTC IRQ\n");
+		pr_warn("tsp2_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9136797addb2..c725b7cb9875 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
 			gpio_free(TS209_RTC_GPIO);
 	}
 	if (qnap_ts209_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
+		pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 5c079d312015..cf2ab531cabc 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -302,7 +302,7 @@ static void __init qnap_ts409_init(void)
 			gpio_free(TS409_RTC_GPIO);
 	}
 	if (qnap_ts409_i2c_rtc.irq == 0)
-		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
 	platform_device_register(&ts409_leds);
 
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index db16dae441e2..1b704d35cf5b 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -403,8 +403,8 @@ static void ts78xx_fpga_supports(void)
 		/* enable devices if magic matches */
 		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
 		case TS7800_FPGA_MAGIC:
-			pr_warning("unrecognised FPGA revision 0x%.2x\n",
-					ts78xx_fpga.id & 0xff);
+			pr_warn("unrecognised FPGA revision 0x%.2x\n",
+				ts78xx_fpga.id & 0xff);
 			ts78xx_fpga.supports.ts_rtc.present = 1;
 			ts78xx_fpga.supports.ts_nand.present = 1;
 			ts78xx_fpga.supports.ts_rng.present = 1;
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index ad5316ae524e..9eb22297cbe1 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -32,7 +32,6 @@ config CPU_S3C2410
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
-	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -76,7 +75,6 @@ config CPU_S3C2442
 config CPU_S3C244X
 	def_bool y
 	depends on CPU_S3C2440 || CPU_S3C2442
-	select SAMSUNG_WDT_RESET
 
 config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 44fa95df9262..bf50328107bd 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -51,7 +51,6 @@
 #include <plat/devs.h>
 #include <plat/cpu-freq.h>
 #include <plat/pwm-core.h>
-#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -513,7 +512,6 @@ struct platform_device s3c2443_device_dma = {
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 
@@ -535,7 +533,6 @@ void __init s3c2416_init_clocks(int xtal)
 void __init s3c2440_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 
@@ -543,7 +540,6 @@ void __init s3c2440_init_clocks(int xtal)
 void __init s3c2442_init_clocks(int xtal)
 {
 	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 #endif
 
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index ac3ff12a0601..c7ac7e61a22e 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -22,7 +22,6 @@ extern  int s3c2410a_init(void);
 extern void s3c2410_map_io(void);
 extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2410_init_clocks(int xtal);
-extern void s3c2410_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2410_init_irq(void);
 #else
 #define s3c2410_init_clocks NULL
@@ -38,7 +37,6 @@ extern void s3c2412_map_io(void);
 extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2412_init_clocks(int xtal);
 extern  int s3c2412_baseclk_add(void);
-extern void s3c2412_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2412_init_irq(void);
 #else
 #define s3c2412_init_clocks NULL
@@ -53,7 +51,6 @@ extern void s3c2416_map_io(void);
 extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2416_init_clocks(int xtal);
 extern  int s3c2416_baseclk_add(void);
-extern void s3c2416_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2416_init_irq(void);
 
 extern struct syscore_ops s3c2416_irq_syscore_ops;
@@ -67,7 +64,6 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
 #define s3c244x_init_uarts NULL
 #endif
@@ -98,7 +94,6 @@ extern void s3c2443_map_io(void);
 extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s3c2443_init_clocks(int xtal);
 extern  int s3c2443_baseclk_add(void);
-extern void s3c2443_restart(enum reboot_mode mode, const char *cmd);
 extern void s3c2443_init_irq(void);
 #else
 #define s3c2443_init_clocks NULL
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
index c3feff3c0488..ffe37bdb9f59 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
@@ -42,8 +42,6 @@
 #define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
 #define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
 
-#define S3C2443_SWRST_RESET		(0x533c2443)
-
 #define S3C2443_PLLCON_OFF		(1<<24)
 
 #define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 5157e250dd13..3e63777a109f 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -247,5 +247,4 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
 	.init_time	= amlm5900_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index e053581cab0b..d03df0df01fa 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -430,5 +430,4 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= anubis_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 9db768f448a5..9ae170fef2a7 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -218,5 +218,4 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= at2440evb_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index f9112b801a33..ed07cf392d4b 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -591,5 +591,4 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
 	.init_time	= bast_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index fc3a08d0cb3f..6d1e0b9c5b27 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -597,5 +597,4 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
 	.init_time	= gta02_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index c9a99bbad545..d35ddc1d9991 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -747,5 +747,4 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
 	.init_time	= h1940_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7804d3c6991b..7d99fe8f6157 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -670,5 +670,4 @@ MACHINE_START(JIVE, "JIVE")
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
 	.init_time	= jive_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 5cc40ec1d254..a8521684a7f5 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -695,5 +695,4 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= mini2440_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 3ac2a54348d6..171c1f11fd22 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -599,7 +599,6 @@ MACHINE_START(N30, "Acer-N30")
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
 MACHINE_END
 
 MACHINE_START(N35, "Acer-N35")
@@ -610,5 +609,4 @@ MACHINE_START(N35, "Acer-N35")
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index c82c281ce351..2a61d13dcd6c 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -159,5 +159,4 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
 	.init_time	= nexcoder_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index 189147b80eca..2f6fdc326835 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -412,5 +412,4 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
 	.init_time	= osiris_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 45833001186d..345a484b93cc 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -122,5 +122,4 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
 	.init_time	= otom11_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 228c9094519d..984516e8307a 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -352,5 +352,4 @@ MACHINE_START(QT2410, "QT2410")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
 	.init_time	= qt2410_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index e2c6541909c1..c3f2682d0c62 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -812,5 +812,4 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
 	.init_time	= rx1950_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 6e749ec3a2ea..cf55196f89ca 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -215,5 +215,4 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.init_time	= rx3715_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index e4dcb9aa2ca2..f886478b88c5 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -51,5 +51,4 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 419fadd6e446..27dd6605e395 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -124,5 +124,4 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
 	.init_time	= smdk2410_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 10726bf84920..586e4a3b8d5d 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -138,7 +138,6 @@ MACHINE_START(S3C2413, "S3C2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= samsung_timer_init,
-	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
@@ -150,7 +149,6 @@ MACHINE_START(SMDK2412, "SMDK2412")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= samsung_timer_init,
-	.restart	= s3c2412_restart,
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
@@ -162,5 +160,4 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
 	.init_time	= smdk2413_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 24189e8e8560..86394f72d29e 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -262,5 +262,4 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
 	.init_time	= smdk2416_init_time,
-	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 5fb89c0ae17a..9bb96bfbb420 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -185,5 +185,4 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.init_time	= smdk2440_init_time,
-	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 0ed77614dcfe..87fe5c5b8073 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -150,5 +150,4 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
 	.init_time	= smdk2443_init_time,
-	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index c616ca2d409e..2deb62f92fb2 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -157,5 +157,4 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
 	.init_time	= tct_hammer_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index f88c584c3001..89f32bd3f01b 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -340,5 +340,4 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
 	.init_time	= vr1000_init_time,
-	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 9d4f64750698..b4460d5f7011 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -165,5 +165,4 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
 	.init_time	= vstms_init_time,
-	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 5ffe828cd659..2a6985a4a0ff 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -42,7 +42,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -135,15 +134,3 @@ int __init s3c2410a_init(void)
 	s3c2410_dev.bus = &s3c2410a_subsys;
 	return s3c2410_init();
 }
-
-void s3c2410_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT) {
-		soft_restart(0);
-	}
-
-	samsung_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 569f3f5a6c71..ecf2c77ab88b 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -48,9 +48,6 @@
 #include "regs-dsc.h"
 #include "s3c2412-power.h"
 
-#define S3C2412_SWRST			(S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET		(0x533C2412)
-
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
 
@@ -128,26 +125,6 @@ static void s3c2412_idle(void)
 	cpu_do_idle();
 }
 
-void s3c2412_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	/* errata "Watch-dog/Software Reset Problem" specifies that
-	 * this reset must be done with the SYSCLK sourced from
-	 * EXTCLK instead of FOUT to avoid a glitch in the reset
-	 * mechanism.
-	 *
-	 * See the watchdog section of the S3C2412 manual for more
-	 * information on this fix.
-	 */
-
-	__raw_writel(0x00, S3C2412_CLKSRC);
-	__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
-
-	mdelay(1);
-}
-
 /* s3c2412_map_io
  *
  * register the standard cpu IO areas, and any passed in from the
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 9fe260ae11e1..bfd4da86deb8 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -81,14 +81,6 @@ static struct device s3c2416_dev = {
 	.bus		= &s3c2416_subsys,
 };
 
-void s3c2416_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
 int __init s3c2416_init(void)
 {
 	printk(KERN_INFO "S3C2416: Initializing architecture\n");
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index c7a804d0348e..87b6b89d8ee7 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -61,14 +61,6 @@ static struct device s3c2443_dev = {
 	.bus		= &s3c2443_subsys,
 };
 
-void s3c2443_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
-}
-
 int __init s3c2443_init(void)
 {
 	printk("S3C2443: Initialising architecture\n");
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index d1c3e65785a1..177f97802745 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -42,7 +42,6 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/nand-core.h>
-#include <plat/watchdog-reset.h>
 
 #include "common.h"
 #include "regs-dsc.h"
@@ -137,14 +136,3 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
-
-void s3c244x_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT)
-		soft_restart(0);
-
-	samsung_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
index 123163dd2ab0..21b4b13c5ab7 100644
--- a/arch/arm/mach-s5pv210/pm.c
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -24,9 +24,8 @@
 
 #include <plat/pm-common.h>
 
-#include <mach/regs-clock.h>
-
 #include "common.h"
+#include "regs-clock.h"
 
 static struct sleep_save s5pv210_core_save[] = {
 	/* Clock ETC */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h
index b14ffcd7f6cc..4640f0f03c12 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/regs-clock.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c
index 53feff33d129..43eb1eaea0c9 100644
--- a/arch/arm/mach-s5pv210/s5pv210.c
+++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -18,9 +18,9 @@
 #include <asm/system_misc.h>
 
 #include <plat/map-base.h>
-#include <mach/regs-clock.h>
 
 #include "common.h"
+#include "regs-clock.h"
 
 static int __init s5pv210_fdt_map_sys(unsigned long node, const char *uname,
 					int depth, void *data)
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 1e6c51c7c2d5..efc49dabbf2f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,30 @@
 config ARCH_SHMOBILE
 	bool
 
+config PM_RCAR
+	bool
+
+config PM_RMOBILE
+	bool
+
+config ARCH_RCAR_GEN1
+	bool
+	select PM_RCAR if PM || SMP
+	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_TMU
+
+config ARCH_RCAR_GEN2
+	bool
+	select PM_RCAR if PM || SMP
+	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
+
+config ARCH_RMOBILE
+	bool
+	select PM_RMOBILE if PM && !ARCH_SHMOBILE_MULTI
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
+
 menuconfig ARCH_SHMOBILE_MULTI
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
@@ -28,18 +52,15 @@ config ARCH_R7S72100
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
-	select RENESAS_INTC_IRQPIN
-	select SYS_SUPPORTS_SH_TMU
+	select ARCH_RCAR_GEN1
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
-	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
+	select ARCH_RCAR_GEN2
 
 config ARCH_R8A7791
-	bool "R-Car M2 (R8A77910)"
-	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
+	bool "R-Car M2-W (R8A77910)"
+	select ARCH_RCAR_GEN2
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -71,84 +92,60 @@ comment "Renesas ARM SoCs System Type"
 
 config ARCH_SH7372
 	bool "SH-Mobile AP4 (SH7372)"
+	select ARCH_RMOBILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
-	select CPU_V7
-	select SH_CLK_CPG
 	select SH_INTC
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
+	select ARCH_RMOBILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
 	select I2C
-	select SH_CLK_CPG
 	select SH_INTC
 	select RENESAS_INTC_IRQPIN
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
+	select ARCH_RMOBILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
-	select SH_CLK_CPG
 	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_RMOBILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
-	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
-	select SYS_SUPPORTS_SH_CMT
-	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
+	select ARCH_RCAR_GEN1
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select CPU_V7
-	select SH_CLK_CPG
 	select ARM_GIC
-	select SYS_SUPPORTS_SH_TMU
-	select RENESAS_INTC_IRQPIN
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
+	select ARCH_RCAR_GEN1
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
-	select SH_CLK_CPG
-	select RENESAS_INTC_IRQPIN
-	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
+	select ARCH_RCAR_GEN2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
 	select MIGHT_HAVE_PCI
-	select SH_CLK_CPG
-	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
 config ARCH_R8A7791
-	bool "R-Car M2 (R8A77910)"
+	bool "R-Car M2-W (R8A77910)"
+	select ARCH_RCAR_GEN2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
-	select CPU_V7
 	select MIGHT_HAVE_PCI
-	select SH_CLK_CPG
-	select RENESAS_IRQC
-	select SYS_SUPPORTS_SH_CMT
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 
 config ARCH_R7S72100
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index fe3878a1a69a..7b259ce60beb 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -8,15 +8,14 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/incl
 obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o intc-sh7372.o pm-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o
-obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o setup-rcar-gen2.o
-obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o setup-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o pm-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o pm-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791)	+= setup-r8a7791.o pm-r8a7791.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
@@ -36,8 +35,9 @@ endif
 
 # CPU reset vector handling objects
 cpu-y				:= platsmp.o headsmp.o
-cpu-$(CONFIG_ARCH_R8A7790)	+= platsmp-apmu.o
-cpu-$(CONFIG_ARCH_R8A7791)	+= platsmp-apmu.o
+
+# Shared SoC family objects
+obj-$(CONFIG_ARCH_RCAR_GEN2)	+= setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
 
 # SMP objects
 smp-y				:= $(cpu-y)
@@ -51,15 +51,11 @@ smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o headsmp-scu.o platsmp-scu.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
-obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o pm-rmobile.o
-obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
-obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o pm-rmobile.o
-obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o pm-rcar.o
-obj-$(CONFIG_ARCH_R8A7790)	+= pm-r8a7790.o pm-rcar.o $(cpu-y)
-obj-$(CONFIG_ARCH_R8A7791)	+= pm-r8a7791.o pm-rcar.o $(cpu-y)
+obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
+obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 
-# IRQ objects
-obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
+# special sh7372 handling for IRQ objects and low level sleep code
+obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o sleep-sh7372.o
 
 # Board objects
 ifdef CONFIG_ARCH_SHMOBILE_MULTI
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 6dbaad611a92..e70983534403 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1231,6 +1231,10 @@ clock_error:
 #define GPIO_PORT8CR	IOMEM(0xe6050008)
 static void __init eva_init(void)
 {
+	static struct pm_domain_device domain_devices[] __initdata = {
+		{ "A4LC", &lcdc0_device },
+		{ "A4LC", &hdmi_lcdc_device },
+	};
 	struct platform_device *usb = NULL;
 
 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
@@ -1316,8 +1320,8 @@ static void __init eva_init(void)
 	platform_add_devices(eva_devices,
 			     ARRAY_SIZE(eva_devices));
 
-	rmobile_add_device_to_domain("A4LC", &lcdc0_device);
-	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
+	rmobile_add_devices_to_domains(domain_devices,
+				       ARRAY_SIZE(domain_devices));
 	if (usb)
 		rmobile_add_device_to_domain("A3SP", usb);
 
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 79f448e93abb..d47b2623267b 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1420,7 +1420,7 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 #define USCCR1		IOMEM(0xE6058144)
 static void __init mackerel_init(void)
 {
-	struct pm_domain_device domain_devices[] = {
+	static struct pm_domain_device domain_devices[] __initdata = {
 		{ "A4LC", &lcdc_device, },
 		{ "A4LC", &hdmi_lcdc_device, },
 		{ "A4LC", &meram_device, },
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index a0d44d537fa0..3d507149a6c4 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -34,23 +34,21 @@ static int r8a7740_pd_a3sp_suspend(void)
 
 static struct rmobile_pm_domain r8a7740_pm_domains[] = {
 	{
+		.genpd.name	= "A4LC",
+		.bit_shift	= 1,
+	}, {
 		.genpd.name	= "A4S",
 		.bit_shift	= 10,
 		.gov		= &pm_domain_always_on_gov,
 		.no_debug	= true,
 		.suspend	= r8a7740_pd_a4s_suspend,
-	},
-	{
+	}, {
 		.genpd.name	= "A3SP",
 		.bit_shift	= 11,
 		.gov		= &pm_domain_always_on_gov,
 		.no_debug	= true,
 		.suspend	= r8a7740_pd_a3sp_suspend,
 	},
-	{
-		.genpd.name	= "A4LC",
-		.bit_shift	= 1,
-	},
 };
 
 void __init r8a7740_init_pm_domains(void)
diff --git a/arch/arm/mach-shmobile/pm-rcar.c b/arch/arm/mach-shmobile/pm-rcar.c
index 34b8a5674f85..00022ee56f80 100644
--- a/arch/arm/mach-shmobile/pm-rcar.c
+++ b/arch/arm/mach-shmobile/pm-rcar.c
@@ -31,8 +31,6 @@
 #define SYSCISR_RETRIES 1000
 #define SYSCISR_DELAY_US 1
 
-#if defined(CONFIG_PM) || defined(CONFIG_SMP)
-
 static void __iomem *rcar_sysc_base;
 static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
 
@@ -137,5 +135,3 @@ void __iomem *rcar_sysc_init(phys_addr_t base)
 
 	return rcar_sysc_base;
 }
-
-#endif /* CONFIG_PM || CONFIG_SMP */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index ebdd16e94a84..a88079af7914 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -27,7 +27,6 @@
 #define PSTR_RETRIES	100
 #define PSTR_DELAY_US	10
 
-#ifdef CONFIG_PM
 static int rmobile_pd_power_down(struct generic_pm_domain *genpd)
 {
 	struct rmobile_pm_domain *rmobile_pd = to_rmobile_pd(genpd);
@@ -151,4 +150,3 @@ void rmobile_add_devices_to_domains(struct pm_domain_device data[],
 		rmobile_add_device_to_domain_td(data[j].domain_name,
 						data[j].pdev, &latencies);
 }
-#endif /* CONFIG_PM */
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 690553a06887..8f66b343162b 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -36,7 +36,7 @@ struct pm_domain_device {
 	struct platform_device *pdev;
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RMOBILE
 extern void rmobile_init_domains(struct rmobile_pm_domain domains[], int num);
 extern void rmobile_add_device_to_domain_td(const char *domain_name,
 					    struct platform_device *pdev,
@@ -58,6 +58,6 @@ extern void rmobile_add_devices_to_domains(struct pm_domain_device data[],
 
 static inline void rmobile_add_devices_to_domains(struct pm_domain_device d[],
 						  int size) {}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_RMOBILE */
 
 #endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 3d5eacaba3e6..30df532fcaa0 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -747,6 +747,19 @@ static void r8a7740_i2c_workaround(struct platform_device *pdev)
 
 void __init r8a7740_add_standard_devices(void)
 {
+	static struct pm_domain_device domain_devices[] __initdata = {
+		{ "A3SP", &scif0_device },
+		{ "A3SP", &scif1_device },
+		{ "A3SP", &scif2_device },
+		{ "A3SP", &scif3_device },
+		{ "A3SP", &scif4_device },
+		{ "A3SP", &scif5_device },
+		{ "A3SP", &scif6_device },
+		{ "A3SP", &scif7_device },
+		{ "A3SP", &scif8_device },
+		{ "A3SP", &i2c1_device },
+	};
+
 	/* I2C work-around */
 	r8a7740_i2c_workaround(&i2c0_device);
 	r8a7740_i2c_workaround(&i2c1_device);
@@ -762,17 +775,8 @@ void __init r8a7740_add_standard_devices(void)
 			     ARRAY_SIZE(r8a7740_late_devices));
 
 	/* add devices to PM domain  */
-
-	rmobile_add_device_to_domain("A3SP",	&scif0_device);
-	rmobile_add_device_to_domain("A3SP",	&scif1_device);
-	rmobile_add_device_to_domain("A3SP",	&scif2_device);
-	rmobile_add_device_to_domain("A3SP",	&scif3_device);
-	rmobile_add_device_to_domain("A3SP",	&scif4_device);
-	rmobile_add_device_to_domain("A3SP",	&scif5_device);
-	rmobile_add_device_to_domain("A3SP",	&scif6_device);
-	rmobile_add_device_to_domain("A3SP",	&scif7_device);
-	rmobile_add_device_to_domain("A3SP",	&scif8_device);
-	rmobile_add_device_to_domain("A3SP",	&i2c1_device);
+	rmobile_add_devices_to_domains(domain_devices,
+				       ARRAY_SIZE(domain_devices));
 }
 
 void __init r8a7740_add_early_devices(void)
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 9cdfcdfd38fc..a04fa5fd00fd 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -927,7 +927,7 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
 
 void __init sh7372_add_standard_devices(void)
 {
-	struct pm_domain_device domain_devices[] = {
+	static struct pm_domain_device domain_devices[] __initdata = {
 		{ "A3RV", &vpu_device, },
 		{ "A4MP", &spu0_device, },
 		{ "A4MP", &spu1_device, },
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 42d4753683ce..d7598aeed803 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -12,81 +12,9 @@
 
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#define SUN4I_WATCHDOG_CTRL_REG		0x00
-#define SUN4I_WATCHDOG_CTRL_RESTART		BIT(0)
-#define SUN4I_WATCHDOG_MODE_REG		0x04
-#define SUN4I_WATCHDOG_MODE_ENABLE		BIT(0)
-#define SUN4I_WATCHDOG_MODE_RESET_ENABLE	BIT(1)
-
-#define SUN6I_WATCHDOG1_IRQ_REG		0x00
-#define SUN6I_WATCHDOG1_CTRL_REG	0x10
-#define SUN6I_WATCHDOG1_CTRL_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_REG	0x14
-#define SUN6I_WATCHDOG1_CONFIG_RESTART		BIT(0)
-#define SUN6I_WATCHDOG1_CONFIG_IRQ		BIT(1)
-#define SUN6I_WATCHDOG1_MODE_REG	0x18
-#define SUN6I_WATCHDOG1_MODE_ENABLE		BIT(0)
-
-static void __iomem *wdt_base;
-
-static void sun4i_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!wdt_base)
-		return;
-
-	/* Enable timer and set reset bit in the watchdog */
-	writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-	       wdt_base + SUN4I_WATCHDOG_MODE_REG);
-
-	/*
-	 * Restart the watchdog. The default (and lowest) interval
-	 * value for the watchdog is 0.5s.
-	 */
-	writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
-
-	while (1) {
-		mdelay(5);
-		writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
-		       wdt_base + SUN4I_WATCHDOG_MODE_REG);
-	}
-}
-
-static struct of_device_id sunxi_restart_ids[] = {
-	{ .compatible = "allwinner,sun4i-a10-wdt" },
-	{ /*sentinel*/ }
-};
-
-static void sunxi_setup_restart(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node(NULL, sunxi_restart_ids);
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_base = of_iomap(np, 0);
-	WARN(!wdt_base, "failed to map watchdog base address");
-}
-
-static void __init sunxi_dt_init(void)
-{
-	sunxi_setup_restart();
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
@@ -96,9 +24,7 @@ static const char * const sunxi_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
-	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sunxi_board_dt_compat,
-	.restart	= sun4i_restart,
 MACHINE_END
 
 static const char * const sun6i_board_dt_compat[] = {
@@ -126,9 +52,7 @@ static const char * const sun7i_board_dt_compat[] = {
 };
 
 DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
-	.init_machine	= sunxi_dt_init,
 	.dt_compat	= sun7i_board_dt_compat,
-	.restart	= sun4i_restart,
 MACHINE_END
 
 static const char * const sun8i_board_dt_compat[] = {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c2baa8ede543..24770e5a5081 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -64,7 +64,9 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 
 static struct omap_system_dma_plat_info *p;
 static struct omap_dma_dev_attr *d;
-
+static void omap_clear_dma(int lch);
+static int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
 static int enable_1510_mode;
 static u32 errata;
 
@@ -284,66 +286,6 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 }
 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
-void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
-{
-	BUG_ON(omap_dma_in_1510_mode());
-
-	if (dma_omap1()) {
-		u16 w;
-
-		w = p->dma_read(CCR2, lch);
-		w &= ~0x03;
-
-		switch (mode) {
-		case OMAP_DMA_CONSTANT_FILL:
-			w |= 0x01;
-			break;
-		case OMAP_DMA_TRANSPARENT_COPY:
-			w |= 0x02;
-			break;
-		case OMAP_DMA_COLOR_DIS:
-			break;
-		default:
-			BUG();
-		}
-		p->dma_write(w, CCR2, lch);
-
-		w = p->dma_read(LCH_CTRL, lch);
-		w &= ~0x0f;
-		/* Default is channel type 2D */
-		if (mode) {
-			p->dma_write(color, COLOR, lch);
-			w |= 1;		/* Channel type G */
-		}
-		p->dma_write(w, LCH_CTRL, lch);
-	}
-
-	if (dma_omap2plus()) {
-		u32 val;
-
-		val = p->dma_read(CCR, lch);
-		val &= ~((1 << 17) | (1 << 16));
-
-		switch (mode) {
-		case OMAP_DMA_CONSTANT_FILL:
-			val |= 1 << 16;
-			break;
-		case OMAP_DMA_TRANSPARENT_COPY:
-			val |= 1 << 17;
-			break;
-		case OMAP_DMA_COLOR_DIS:
-			break;
-		default:
-			BUG();
-		}
-		p->dma_write(val, CCR, lch);
-
-		color &= 0xffffff;
-		p->dma_write(color, COLOR, lch);
-	}
-}
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-
 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 {
 	if (dma_omap2plus()) {
@@ -417,16 +359,6 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
 }
 EXPORT_SYMBOL(omap_set_dma_params);
 
-void omap_set_dma_src_index(int lch, int eidx, int fidx)
-{
-	if (dma_omap2plus())
-		return;
-
-	p->dma_write(eidx, CSEI, lch);
-	p->dma_write(fidx, CSFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_src_index);
-
 void omap_set_dma_src_data_pack(int lch, int enable)
 {
 	u32 l;
@@ -510,16 +442,6 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 }
 EXPORT_SYMBOL(omap_set_dma_dest_params);
 
-void omap_set_dma_dest_index(int lch, int eidx, int fidx)
-{
-	if (dma_omap2plus())
-		return;
-
-	p->dma_write(eidx, CDEI, lch);
-	p->dma_write(fidx, CDFI, lch);
-}
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-
 void omap_set_dma_dest_data_pack(int lch, int enable)
 {
 	u32 l;
@@ -843,7 +765,7 @@ EXPORT_SYMBOL(omap_dma_set_global_params);
  * Both of the above can be set with one of the following values :
  * 	DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
  */
-int
+static int
 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 		      unsigned char write_prio)
 {
@@ -864,13 +786,13 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 
 	return 0;
 }
-EXPORT_SYMBOL(omap_dma_set_prio_lch);
+
 
 /*
  * Clears any DMA state so the DMA engine is ready to restart with new buffers
  * through omap_start_dma(). Any buffers in flight are discarded.
  */
-void omap_clear_dma(int lch)
+static void omap_clear_dma(int lch)
 {
 	unsigned long flags;
 
@@ -878,7 +800,6 @@ void omap_clear_dma(int lch)
 	p->clear_dma(lch);
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(omap_clear_dma);
 
 void omap_start_dma(int lch)
 {
@@ -1167,652 +1088,6 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
 }
 EXPORT_SYMBOL(omap_dma_link_lch);
 
-/*
- * Once the DMA queue is stopped, we can destroy it.
- */
-void omap_dma_unlink_lch(int lch_head, int lch_queue)
-{
-	if (omap_dma_in_1510_mode()) {
-		if (lch_head == lch_queue) {
-			p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
-								CCR, lch_head);
-			return;
-		}
-		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-
-	if (dma_chan[lch_head].next_lch != lch_queue ||
-	    dma_chan[lch_head].next_lch == -1) {
-		pr_err("omap_dma: trying to unlink non linked channels\n");
-		dump_stack();
-	}
-
-	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-	    (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
-		pr_err("omap_dma: You need to stop the DMA channels before unlinking\n");
-		dump_stack();
-	}
-
-	dma_chan[lch_head].next_lch = -1;
-}
-EXPORT_SYMBOL(omap_dma_unlink_lch);
-
-#ifndef CONFIG_ARCH_OMAP1
-/* Create chain of DMA channesls */
-static void create_dma_lch_chain(int lch_head, int lch_queue)
-{
-	u32 l;
-
-	/* Check if this is the first link in chain */
-	if (dma_chan[lch_head].next_linked_ch == -1) {
-		dma_chan[lch_head].next_linked_ch = lch_queue;
-		dma_chan[lch_head].prev_linked_ch = lch_queue;
-		dma_chan[lch_queue].next_linked_ch = lch_head;
-		dma_chan[lch_queue].prev_linked_ch = lch_head;
-	}
-
-	/* a link exists, link the new channel in circular chain */
-	else {
-		dma_chan[lch_queue].next_linked_ch =
-					dma_chan[lch_head].next_linked_ch;
-		dma_chan[lch_queue].prev_linked_ch = lch_head;
-		dma_chan[lch_head].next_linked_ch = lch_queue;
-		dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
-					lch_queue;
-	}
-
-	l = p->dma_read(CLNK_CTRL, lch_head);
-	l &= ~(0x1f);
-	l |= lch_queue;
-	p->dma_write(l, CLNK_CTRL, lch_head);
-
-	l = p->dma_read(CLNK_CTRL, lch_queue);
-	l &= ~(0x1f);
-	l |= (dma_chan[lch_queue].next_linked_ch);
-	p->dma_write(l, CLNK_CTRL, lch_queue);
-}
-
-/**
- * @brief omap_request_dma_chain : Request a chain of DMA channels
- *
- * @param dev_id - Device id using the dma channel
- * @param dev_name - Device name
- * @param callback - Call back function
- * @chain_id -
- * @no_of_chans - Number of channels requested
- * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
- * 					      OMAP_DMA_DYNAMIC_CHAIN
- * @params - Channel parameters
- *
- * @return - Success : 0
- * 	     Failure: -EINVAL/-ENOMEM
- */
-int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int lch, u16 ch_status,
-					     void *data),
-			   int *chain_id, int no_of_chans, int chain_mode,
-			   struct omap_dma_channel_params params)
-{
-	int *channels;
-	int i, err;
-
-	/* Is the chain mode valid ? */
-	if (chain_mode != OMAP_DMA_STATIC_CHAIN
-			&& chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
-		printk(KERN_ERR "Invalid chain mode requested\n");
-		return -EINVAL;
-	}
-
-	if (unlikely((no_of_chans < 1
-			|| no_of_chans > dma_lch_count))) {
-		printk(KERN_ERR "Invalid Number of channels requested\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Allocate a queue to maintain the status of the channels
-	 * in the chain
-	 */
-	channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
-	if (channels == NULL) {
-		printk(KERN_ERR "omap_dma: No memory for channel queue\n");
-		return -ENOMEM;
-	}
-
-	/* request and reserve DMA channels for the chain */
-	for (i = 0; i < no_of_chans; i++) {
-		err = omap_request_dma(dev_id, dev_name,
-					callback, NULL, &channels[i]);
-		if (err < 0) {
-			int j;
-			for (j = 0; j < i; j++)
-				omap_free_dma(channels[j]);
-			kfree(channels);
-			printk(KERN_ERR "omap_dma: Request failed %d\n", err);
-			return err;
-		}
-		dma_chan[channels[i]].prev_linked_ch = -1;
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-
-		/*
-		 * Allowing client drivers to set common parameters now,
-		 * so that later only relevant (src_start, dest_start
-		 * and element count) can be set
-		 */
-		omap_set_dma_params(channels[i], &params);
-	}
-
-	*chain_id = channels[0];
-	dma_linked_lch[*chain_id].linked_dmach_q = channels;
-	dma_linked_lch[*chain_id].chain_mode = chain_mode;
-	dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
-	dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
-
-	for (i = 0; i < no_of_chans; i++)
-		dma_chan[channels[i]].chain_id = *chain_id;
-
-	/* Reset the Queue pointers */
-	OMAP_DMA_CHAIN_QINIT(*chain_id);
-
-	/* Set up the chain */
-	if (no_of_chans == 1)
-		create_dma_lch_chain(channels[0], channels[0]);
-	else {
-		for (i = 0; i < (no_of_chans - 1); i++)
-			create_dma_lch_chain(channels[i], channels[i + 1]);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_dma_chain);
-
-/**
- * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
- * params after setting it. Dont do this while dma is running!!
- *
- * @param chain_id - Chained logical channel id.
- * @param params
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_modify_dma_chain_params(int chain_id,
-				struct omap_dma_channel_params params)
-{
-	int *channels;
-	u32 i;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0
-			|| chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-		/*
-		 * Allowing client drivers to set common parameters now,
-		 * so that later only relevant (src_start, dest_start
-		 * and element count) can be set
-		 */
-		omap_set_dma_params(channels[i], &params);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_modify_dma_chain_params);
-
-/**
- * @brief omap_free_dma_chain - Free all the logical channels in a chain.
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_free_dma_chain(int chain_id)
-{
-	int *channels;
-	u32 i;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-		dma_chan[channels[i]].next_linked_ch = -1;
-		dma_chan[channels[i]].prev_linked_ch = -1;
-		dma_chan[channels[i]].chain_id = -1;
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-		omap_free_dma(channels[i]);
-	}
-
-	kfree(channels);
-
-	dma_linked_lch[chain_id].linked_dmach_q = NULL;
-	dma_linked_lch[chain_id].chain_mode = -1;
-	dma_linked_lch[chain_id].chain_state = -1;
-
-	return (0);
-}
-EXPORT_SYMBOL(omap_free_dma_chain);
-
-/**
- * @brief omap_dma_chain_status - Check if the chain is in
- * active / inactive state.
- * @param chain_id
- *
- * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
- * 	     Failure : -EINVAL
- */
-int omap_dma_chain_status(int chain_id)
-{
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
-			dma_linked_lch[chain_id].q_count);
-
-	if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
-		return OMAP_DMA_CHAIN_INACTIVE;
-
-	return OMAP_DMA_CHAIN_ACTIVE;
-}
-EXPORT_SYMBOL(omap_dma_chain_status);
-
-/**
- * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
- * set the params and start the transfer.
- *
- * @param chain_id
- * @param src_start - buffer start address
- * @param dest_start - Dest address
- * @param elem_count
- * @param frame_count
- * @param callbk_data - channel callback parameter data.
- *
- * @return  - Success : 0
- * 	      Failure: -EINVAL/-EBUSY
- */
-int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
-			int elem_count, int frame_count, void *callbk_data)
-{
-	int *channels;
-	u32 l, lch;
-	int start_dma = 0;
-
-	/*
-	 * if buffer size is less than 1 then there is
-	 * no use of starting the chain
-	 */
-	if (elem_count < 1) {
-		printk(KERN_ERR "Invalid buffer size\n");
-		return -EINVAL;
-	}
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0
-			|| chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exist\n");
-		return -EINVAL;
-	}
-
-	/* Check if all the channels in chain are in use */
-	if (OMAP_DMA_CHAIN_QFULL(chain_id))
-		return -EBUSY;
-
-	/* Frame count may be negative in case of indexed transfers */
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get a free channel */
-	lch = channels[dma_linked_lch[chain_id].q_tail];
-
-	/* Store the callback data */
-	dma_chan[lch].data = callbk_data;
-
-	/* Increment the q_tail */
-	OMAP_DMA_CHAIN_INCQTAIL(chain_id);
-
-	/* Set the params to the free channel */
-	if (src_start != 0)
-		p->dma_write(src_start, CSSA, lch);
-	if (dest_start != 0)
-		p->dma_write(dest_start, CDSA, lch);
-
-	/* Write the buffer size */
-	p->dma_write(elem_count, CEN, lch);
-	p->dma_write(frame_count, CFN, lch);
-
-	/*
-	 * If the chain is dynamically linked,
-	 * then we may have to start the chain if its not active
-	 */
-	if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
-
-		/*
-		 * In Dynamic chain, if the chain is not started,
-		 * queue the channel
-		 */
-		if (dma_linked_lch[chain_id].chain_state ==
-						DMA_CHAIN_NOTSTARTED) {
-			/* Enable the link in previous channel */
-			if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
-								DMA_CH_QUEUED)
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-			dma_chan[lch].state = DMA_CH_QUEUED;
-		}
-
-		/*
-		 * Chain is already started, make sure its active,
-		 * if not then start the chain
-		 */
-		else {
-			start_dma = 1;
-
-			if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
-							DMA_CH_STARTED) {
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-				dma_chan[lch].state = DMA_CH_QUEUED;
-				start_dma = 0;
-				if (0 == ((1 << 7) & p->dma_read(
-					CCR, dma_chan[lch].prev_linked_ch))) {
-					disable_lnk(dma_chan[lch].
-						    prev_linked_ch);
-					pr_debug("\n prev ch is stopped\n");
-					start_dma = 1;
-				}
-			}
-
-			else if (dma_chan[dma_chan[lch].prev_linked_ch].state
-							== DMA_CH_QUEUED) {
-				enable_lnk(dma_chan[lch].prev_linked_ch);
-				dma_chan[lch].state = DMA_CH_QUEUED;
-				start_dma = 0;
-			}
-			omap_enable_channel_irq(lch);
-
-			l = p->dma_read(CCR, lch);
-
-			if ((0 == (l & (1 << 24))))
-				l &= ~(1 << 25);
-			else
-				l |= (1 << 25);
-			if (start_dma == 1) {
-				if (0 == (l & (1 << 7))) {
-					l |= (1 << 7);
-					dma_chan[lch].state = DMA_CH_STARTED;
-					pr_debug("starting %d\n", lch);
-					p->dma_write(l, CCR, lch);
-				} else
-					start_dma = 0;
-			} else {
-				if (0 == (l & (1 << 7)))
-					p->dma_write(l, CCR, lch);
-			}
-			dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_dma_chain_a_transfer);
-
-/**
- * @brief omap_start_dma_chain_transfers - Start the chain
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL/-EBUSY
- */
-int omap_start_dma_chain_transfers(int chain_id)
-{
-	int *channels;
-	u32 l, i;
-
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
-		printk(KERN_ERR "Chain is already started\n");
-		return -EBUSY;
-	}
-
-	if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
-		for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
-									i++) {
-			enable_lnk(channels[i]);
-			omap_enable_channel_irq(channels[i]);
-		}
-	} else {
-		omap_enable_channel_irq(channels[0]);
-	}
-
-	l = p->dma_read(CCR, channels[0]);
-	l |= (1 << 7);
-	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
-	dma_chan[channels[0]].state = DMA_CH_STARTED;
-
-	if ((0 == (l & (1 << 24))))
-		l &= ~(1 << 25);
-	else
-		l |= (1 << 25);
-	p->dma_write(l, CCR, channels[0]);
-
-	dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_start_dma_chain_transfers);
-
-/**
- * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
- *
- * @param chain_id
- *
- * @return - Success : 0
- * 	     Failure : EINVAL
- */
-int omap_stop_dma_chain_transfers(int chain_id)
-{
-	int *channels;
-	u32 l, i;
-	u32 sys_cf = 0;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
-		sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
-		l = sys_cf;
-		/* Middle mode reg set no Standby */
-		l &= ~((1 << 12)|(1 << 13));
-		p->dma_write(l, OCP_SYSCONFIG, 0);
-	}
-
-	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
-
-		/* Stop the Channel transmission */
-		l = p->dma_read(CCR, channels[i]);
-		l &= ~(1 << 7);
-		p->dma_write(l, CCR, channels[i]);
-
-		/* Disable the link in all the channels */
-		disable_lnk(channels[i]);
-		dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
-
-	}
-	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
-
-	/* Reset the Queue pointers */
-	OMAP_DMA_CHAIN_QINIT(chain_id);
-
-	if (IS_DMA_ERRATA(DMA_ERRATA_i88))
-		p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
-
-/* Get the index of the ongoing DMA in chain */
-/**
- * @brief omap_get_dma_chain_index - Get the element and frame index
- * of the ongoing DMA in chain
- *
- * @param chain_id
- * @param ei - Element index
- * @param fi - Frame index
- *
- * @return - Success : 0
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-	if ((!ei) || (!fi))
-		return -EINVAL;
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	*ei = p->dma_read(CCEN, lch);
-	*fi = p->dma_read(CCFN, lch);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_get_dma_chain_index);
-
-/**
- * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
- * ongoing DMA in chain
- *
- * @param chain_id
- *
- * @return - Success : Destination position
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_dst_pos(int chain_id)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	return p->dma_read(CDAC, lch);
-}
-EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
-
-/**
- * @brief omap_get_dma_chain_src_pos - Get the source position
- * of the ongoing DMA in chain
- * @param chain_id
- *
- * @return - Success : Destination position
- * 	     Failure : -EINVAL
- */
-int omap_get_dma_chain_src_pos(int chain_id)
-{
-	int lch;
-	int *channels;
-
-	/* Check for input params */
-	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
-		printk(KERN_ERR "Invalid chain id\n");
-		return -EINVAL;
-	}
-
-	/* Check if the chain exists */
-	if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
-		printk(KERN_ERR "Chain doesn't exists\n");
-		return -EINVAL;
-	}
-
-	channels = dma_linked_lch[chain_id].linked_dmach_q;
-
-	/* Get the current channel */
-	lch = channels[dma_linked_lch[chain_id].q_head];
-
-	return p->dma_read(CSAC, lch);
-}
-EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
-#endif	/* ifndef CONFIG_ARCH_OMAP1 */
-
 /*----------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_OMAP1
author	Linus Torvalds	2014-10-08 17:06:53 -0400
committer	Linus Torvalds	2014-10-08 17:06:53 -0400
commit	212fe84a6f215c39795a76517c1c02114d428681 (patch)
tree	4692680312616d6a5c562f2d494c12d21b697237 /arch/arm
parent	4a4743e840d06a5772be7c21110807165c5b3c9f (diff)
parent	05301fe7de11dac87638f1728f8ee8b31bc1cf31 (diff)