diff options
| author | Olof Johansson | 2017-06-18 23:06:36 -0700 |
|---|---|---|
| committer | Olof Johansson | 2017-06-18 23:06:36 -0700 |
| commit | 2cb6115deba000ee97359dc6cc85ad92ebb0bdaa (patch) | |
| tree | fc1b7ce7fbee39255be6f60267abf559ed413b4b /arch/arm | |
| parent | ae1d266305f5da054a29589634ab7d21c295439d (diff) | |
| parent | d8710c3fb912574709166bba24f4c64162ab832c (diff) | |
Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree updates for 4.13:
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
Board.
- A series from Alexandre Belloni to correct the vendor prefix for
rv4162 compatible.
- A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
imx7d-sdb board.
- Increase the SGTL5000 LRCLK pad strength to fix a random audio
channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
boards.
- Clean up non-existing property 'enable-active-low' from fixed
regulator device nodes.
- Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
though device drivers do not use the polarity for now.
- Add Wifi and Bluetooth support for imx7d-sdb board.
- Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
- Update zii-rdu2 device tree source to use #include "..." for local
inclusion.
- A series from Philipp Zabel and Steve Longerbeam to enable video
capture support for imx6qdl platforms.
- A number of small random updates on various board support.
* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
ARM: dts: ls1021a: update the clockgen node
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6qdl: add capture-subsystem device
ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add multiplexer controls
ARM: dts: imx6: Fix PCI GPIO reset polarity
ARM: dts: imx7d-sdb: Add Bluetooth support
ARM: dts: imx7d-sdb: Add Wifi support
ARM: dts: imx7d-sdb: Adjust the regulator nodes
ARM: dts: imx: Fix Ethernet PHY reset polarity
ARM: dts: imx7: Fix typo in watchdog pin name
ARM: dts: vf610-zii: Add switch eeprom-length properties
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
78 files changed, 2361 insertions, 226 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f87854842d82..c09763760e88 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -365,6 +365,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-gw553x.dtb \ + imx6dl-gw560x.dtb \ imx6dl-gw5903.dtb \ imx6dl-gw5904.dtb \ imx6dl-hummingboard.dtb \ @@ -410,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-gw553x.dtb \ + imx6q-gw560x.dtb \ imx6q-gw5903.dtb \ imx6q-gw5904.dtb \ imx6q-h100.dtb \ @@ -478,6 +480,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-sht11.dtb \ diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts index 4ec32f4c7885..221fd55e967e 100644 --- a/arch/arm/boot/dts/imx23-sansa.dts +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -42,6 +42,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx23.dtsi" / { @@ -149,9 +150,8 @@ regulator-name = "vdd-touchpad0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 26 0>; + gpio = <&gpio0 26 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; reg_vdd_tuner: regulator-vdd-tuner0 { @@ -159,9 +159,8 @@ regulator-name = "vdd-tuner0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_LOW>; regulator-always-on; - enable-active-low; }; backlight { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index 9b31faa96377..30a62d4be8d9 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -97,7 +97,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; - phy-reset-gpios = <&gpio3 7 0>; + phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; phy-mode = "rmii"; phy-supply = <®_fec_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index d921dd2ed676..c52692821fb1 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -125,7 +125,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 8 0>; + phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 0cdf333336cd..dfcc8e00cf1c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> #include "imx25-pinfunc.h" / { diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi index 4f3e0f473581..0b8490b21a38 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi @@ -40,7 +40,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 82fec935ce83..c973c5d91875 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -193,7 +193,7 @@ status = "okay"; at24@52 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x52>; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index e5beaa58bb40..3d13b321d27b 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10037>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a9c347e48bcf..4cd52d53cf00 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -327,7 +327,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 7a80bd686c40..c6067915b238 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -162,7 +162,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index f5c6dce34abe..70c7bb4a5a0e 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -129,7 +129,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 0>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts index e773144e1e03..b61fd61eb1c7 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -31,7 +31,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a5ba669b4eaa..5309bb90d7d5 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -203,7 +203,7 @@ }; at24@51 { - compatible = "at24,24c32"; + compatible = "atmel,24c32"; pagesize = <32>; reg = <0x51>; }; @@ -262,7 +262,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index bb5329479c62..9d6c8fe28d74 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -188,7 +188,7 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index dba2d951aa15..98b5faa06e27 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -53,7 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 12 0>; + phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 2a98afcd8a4e..3747d80104f4 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -12,6 +12,7 @@ */ #include "imx50-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/imx5-clock.h> / { diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts index e88b2a6be079..c83ac1600322 100644 --- a/arch/arm/boot/dts/imx51-apf51.dts +++ b/arch/arm/boot/dts/imx51-apf51.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "mii"; - phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; phy-reset-duration = <1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 2e44d2aba14e..df705ba48897 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -195,7 +195,7 @@ }; &fec { - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 40b3e31935d0..683dcbe27cbd 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -344,7 +344,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 472f6f0f55b3..33cb64fc8372 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -273,6 +273,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 0>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 85972f2201c2..eecdc1c55eef 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -272,7 +272,7 @@ }; eeprom: 24c64@50 { - compatible = "at,24c64"; + compatible = "atmel,24c64"; pagesize = <32>; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 3a3220141988..7807c1fa1101 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -201,7 +201,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&phy0>; mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi index 524192cf6a0f..df8dafe2564d 100644 --- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi @@ -137,7 +137,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 2 0>; + phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts new file mode 100644 index 000000000000..21bdfaf8df53 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw560x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X"; + compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2cb72824e800..29b45f2e64e0 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -94,7 +94,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 31 0>; + phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2f904527a097..33040761b253 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -48,3 +48,8 @@ model = "Freescale i.MX6 DualLite SABRE Lite Board"; compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts index 1e45f2f9d0b6..9607afe088fc 100644 --- a/arch/arm/boot/dts/imx6dl-sabresd.dts +++ b/arch/arm/boot/dts/imx6dl-sabresd.dts @@ -15,3 +15,8 @@ model = "Freescale i.MX6 DualLite SABRE Smart Device Board"; compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl"; }; + +&ipu1_csi1_from_ipu1_csi1_mux { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 7aa120fbdc71..8475e6cc59ac 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -100,6 +100,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>; @@ -164,6 +169,116 @@ <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>; }; +&gpr { + ipu1_csi0_mux: ipu1_csi0_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi0_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu1_csi1_mux: ipu1_csi1_mux@34 { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi1_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi1_mux_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>; + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi1_mux_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>; + }; + }; + + port@3 { + reg = <3>; + + ipu1_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>; + }; + }; + + port@4 { + reg = <4>; + + ipu1_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@5 { + reg = <5>; + + ipu1_csi1_mux_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>; + }; + }; + }; +}; + &gpt { compatible = "fsl,imx6dl-gpt"; }; @@ -172,6 +287,12 @@ compatible = "fsl,imx6dl-hdmi"; }; +&ipu1_csi1 { + ipu1_csi1_from_ipu1_csi1_mux: endpoint { + remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -181,6 +302,74 @@ "di0", "di1"; }; +&mipi_csi { + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + + mipi_vc0_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc1_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>; + }; + + mipi_vc1_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc2_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>; + }; + + mipi_vc2_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_vc3_to_ipu1_csi0_mux: endpoint@0 { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>; + }; + + mipi_vc3_to_ipu1_csi1_mux: endpoint@1 { + remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>; + }; + }; +}; + +&mux { + mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */ + <0x34 0x00000038>, /* IPU_CSI1_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6dl-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 14fa6b25dc45..5fcb0372d58b 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -321,7 +321,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; fsl,tx-swing-full = <103>; fsl,tx-swing-low = <103>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 66cac5328b86..fe6ab0aa34f9 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -64,6 +64,14 @@ }; }; + awnh387_pwrseq: pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwrseq>; + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + }; + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; @@ -215,7 +223,7 @@ clock-frequency = <100000>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; @@ -304,6 +312,13 @@ >; }; + pinctrl_pwrseq: pwrseqgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 @@ -330,6 +345,17 @@ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 >; }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; }; &pcie { @@ -382,3 +408,18 @@ dr_mode = "otg"; status = "okay"; }; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + mmc-pwrseq = <&awnh387_pwrseq>; + non-removable; + /* + * If the OS probes the Bluetooth AMP function advertised on this bus + * but the firmware in place does not support it, the WiFi/BT module + * gets unresponsive. + * Users who configured their OS properly can enable this node to gain + * WiFi and/or plain Bluetooth support. + */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index f28883bbe7b1..33eb7f180995 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-supply = <&vgen2_1v2_eth>; status = "okay"; }; @@ -435,7 +435,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 8 0>; + reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts index fd2220aa49e2..1f0f950dc11e 100644 --- a/arch/arm/boot/dts/imx6q-evi.dts +++ b/arch/arm/boot/dts/imx6q-evi.dts @@ -135,7 +135,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713f42c0..9dbeea05a949 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -154,7 +153,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts new file mode 100644 index 000000000000..735f2bbf1439 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw560x.dts @@ -0,0 +1,59 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw560x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW560X"; + compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 0fa32b2f3aec..d83cfb6ec598 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -217,7 +217,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet_novena>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; rxc-skew-ps = <3000>; rxdv-skew-ps = <0>; txc-skew-ps = <3000>; @@ -446,7 +446,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_novena>; - reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 02a7cdfd57c9..dc51262e7b2f 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -52,3 +52,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 9cbdfe7a0931..527772b62fee 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -23,3 +23,8 @@ &sata { status = "okay"; }; + +&ipu1_csi1_from_mipi_vc1 { + clock-lanes = <0>; + data-lanes = <1 2>; +}; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts index d900ad6ec5f8..16d5be1aeb3c 100644 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -130,7 +130,7 @@ #size-cells = <0>; eeprom@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts index b2d346640fd7..6be8a1eea895 100644 --- a/arch/arm/boot/dts/imx6q-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include <imx6q.dtsi> -#include <imx6qdl-zii-rdu2.dtsi> +#include "imx6q.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2 Board"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9a5d0b8c7b0..90a741732f60 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -125,7 +125,7 @@ clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; ipu2: ipu@02800000 { @@ -143,10 +143,18 @@ ipu2_csi0: port@0 { reg = <0>; + + ipu2_csi0_from_mipi_vc2: endpoint { + remote-endpoint = <&mipi_vc2_to_ipu2_csi0>; + }; }; ipu2_csi1: port@1 { reg = <1>; + + ipu2_csi1_from_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>; + }; }; ipu2_di0: port@2 { @@ -198,6 +206,11 @@ }; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; @@ -246,6 +259,68 @@ gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>; }; +&gpr { + ipu1_csi0_mux { + compatible = "video-mux"; + mux-controls = <&mux 0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu1_csi0_mux_from_mipi_vc0: endpoint { + remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu1_csi0_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu1_csi0_mux_to_ipu1_csi0: endpoint { + remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>; + }; + }; + }; + + ipu2_csi1_mux { + compatible = "video-mux"; + mux-controls = <&mux 1>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ipu2_csi1_mux_from_mipi_vc3: endpoint { + remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>; + }; + }; + + port@1 { + reg = <1>; + + ipu2_csi1_mux_from_parallel_sensor: endpoint { + }; + }; + + port@2 { + reg = <2>; + + ipu2_csi1_mux_to_ipu2_csi1: endpoint { + remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>; + }; + }; + }; +}; + &hdmi { compatible = "fsl,imx6q-hdmi"; @@ -266,6 +341,12 @@ }; }; +&ipu1_csi1 { + ipu1_csi1_from_mipi_vc1: endpoint { + remote-endpoint = <&mipi_vc1_to_ipu1_csi1>; + }; +}; + &ldb { clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, @@ -312,6 +393,40 @@ }; }; +&mipi_csi { + port@1 { + reg = <1>; + + mipi_vc0_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>; + }; + }; + + port@2 { + reg = <2>; + + mipi_vc1_to_ipu1_csi1: endpoint { + remote-endpoint = <&ipu1_csi1_from_mipi_vc1>; + }; + }; + + port@3 { + reg = <3>; + + mipi_vc2_to_ipu2_csi0: endpoint { + remote-endpoint = <&ipu2_csi0_from_mipi_vc2>; + }; + }; + + port@4 { + reg = <4>; + + mipi_vc3_to_ipu2_csi1_mux: endpoint { + remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>; + }; + }; +}; + &mipi_dsi { ports { port@2 { @@ -332,6 +447,16 @@ }; }; +&mux { + mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */ + <0x04 0x00100000>, /* MIPI_IPU2_MUX */ + <0x0c 0x0000000c>, /* HDMI_MUX_CTL */ + <0x0c 0x000000c0>, /* LVDS0_MUX_CTL */ + <0x0c 0x00000300>, /* LVDS1_MUX_CTL */ + <0x28 0x00000003>, /* DCIC1_MUX_CTL */ + <0x28 0x0000000c>; /* DCIC2_MUX_CTL */ +}; + &vpu { compatible = "fsl,imx6q-vpu", "cnm,coda960"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 550e100e85fc..9cd2a7477ed7 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -232,7 +232,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index b2debc0aa720..7d64075204ae 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -118,7 +118,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index ec68f1cace31..1b1872873207 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -320,7 +320,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>; txd0-skew-ps = <0>; txd1-skew-ps = <0>; txd2-skew-ps = <0>; @@ -335,7 +335,7 @@ }; &pcie { - reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index e8078758f26c..ad84eddb6836 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -254,6 +254,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e0dc6e..5bc6ed1a5b35 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda94d14b..66fcf838e964 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi new file mode 100644 index 000000000000..d894dde6e85d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -0,0 +1,749 @@ +/* + * Copyright 2017 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = < + 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100 + >; + default-brightness-level = <100>; + }; + + backlight-keypad { + compatible = "gpio-backlight"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + default-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory@10000000 { + reg = <0x10000000 0x40000000>; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "12P0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1p4v: regulator-vddsoc { + compatible = "regulator-fixed"; + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx6q-ventana-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + ds1672: rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + + tca8418: keypad@34 { + compatible = "ti,tca8418"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keypad>; + reg = <0x34>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9) + >; + keypad,num-rows = <4>; + keypad,num-columns = <4>; + }; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x3c>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + regulators { + /* VDD_DDR (1+R1/R2 = 2.105) */ + reg_vdd_ddr: sw2 { + regulator-name = "vddddr"; + regulator-min-microvolt = <868310>; + regulator-max-microvolt = <1684000>; + lltc,fb-voltage-divider = <221000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_ARM (1+R1/R2 = 1.931) */ + reg_vdd_arm: sw3 { + regulator-name = "vddarm"; + regulator-min-microvolt = <796551>; + regulator-max-microvolt = <1544827>; + lltc,fb-voltage-divider = <243000 261000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + linux,phandle = <®_vdd_arm>; + }; + + /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ + reg_1p8v: sw4 { + regulator-name = "vdd1p8"; + regulator-min-microvolt = <1033310>; + regulator-max-microvolt = <2004000>; + lltc,fb-voltage-divider = <301000 200000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */ + reg_1p0v: ldo2 { + regulator-name = "vdd1p0"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1050000>; + lltc,fb-voltage-divider = <78700 200000>; + regulator-boot-on; + regulator-always-on; + }; + + /* VDD_AUD_1P8: Audio codec */ + reg_aud_1p8v: ldo3 { + regulator-name = "vdd1p8a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + /* VDD_HIGH (1+R1/R2 = 4.17) */ + reg_3p0v: ldo4 { + regulator-name = "vdd3p0"; + regulator-min-microvolt = <3023250>; + regulator-max-microvolt = <3023250>; + lltc,fb-voltage-divider = <634000 200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts: touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio5>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + }; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ + status = "disabled"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ + status = "disabled"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* AUD4 */ + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */ + /* AUD6 */ + MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0 + MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0 + MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0 + MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0 + >; + }; + + pinctrl_ecspi3: escpi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ + >; + }; + + pinctrl_flexcan: flexcangrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x4001b0b0 /* DIOI2C_DIS# */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x0001b0b0 /* LVDS_TOUCH_IRQ# */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x0001b0b0 /* LVDS_BACKEN */ + >; + }; + + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x0001b0b0 /* KEYPAD_LED_EN */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */ + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* USBHUB_RST# */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x170f9 + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x170f9 + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x170f9 + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a9b207751a02..900e8c781f91 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -46,7 +46,7 @@ pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; phy-mode = "rgmii"; phy-reset-duration = <2>; - phy-reset-gpios = <&gpio4 15 0>; + phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index bad3c9f9eeac..b63134e3b51a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -408,7 +408,7 @@ }; rtc: rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 559da17297ef..aeaa5a6e4fcf 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -326,7 +326,7 @@ }; rtc@68 { - compatible = "st,rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rv4162>; reg = <0x68>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 70772ebadd4d..f22e5879340b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -271,7 +271,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 27 0>; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; txen-skew-ps = <0>; txc-skew-ps = <3000>; rxdv-skew-ps = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 6e5cb6a99550..d81b0078a100 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -374,7 +374,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 17 0>; + reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index a2a714d199ea..6a7594e5d183 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -108,6 +108,76 @@ default-brightness-level = <7>; status = "okay"; }; + + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + mux-gpios = <&gpio5 4 0>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adv7180: camera@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; + + max7310_a: gpio@30 { + compatible = "maxim,max7310"; + reg = <0x30>; + gpio-controller; + #gpio-cells = <2>; + }; + + max7310_b: gpio@32 { + compatible = "maxim,max7310"; + reg = <0x32>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7310>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + max7310_c: gpio@34 { + compatible = "maxim,max7310"; + reg = <0x34>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &clks { @@ -290,27 +360,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - - max7310_a: gpio@30 { - compatible = "maxim,max7310"; - reg = <0x30>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_b: gpio@32 { - compatible = "maxim,max7310"; - reg = <0x32>; - gpio-controller; - #gpio-cells = <2>; - }; - - max7310_c: gpio@34 { - compatible = "maxim,max7310"; - reg = <0x34>; - gpio-controller; - #gpio-cells = <2>; - }; }; &iomuxc { @@ -418,12 +467,52 @@ >; }; + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_max7310: max7310grp { + fsl,pins = < + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; + pinctrl_gpt_input_capture0: gptinputcapture0grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0 + >; + }; + + pinctrl_gpt_input_capture1: gptinputcapture1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 84131794e97b..afe7449c47da 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -39,6 +39,8 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ + +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -94,6 +96,42 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_1p5v: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_1p8v: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p8v: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + }; + + mipi_xclk: mipi_xclk { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <22000000>; + clock-output-names = "mipi_pwm3"; + pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */ + status = "okay"; }; gpio-keys { @@ -220,6 +258,22 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -270,9 +324,6 @@ txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; @@ -301,6 +352,53 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov5640: camera@40 { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x40>; + clocks = <&mipi_xclk>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_2p8v>; + DVDD-supply = <®_1p5v>; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */ + powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */ + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + + ov5642: camera@42 { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + reg = <0x42>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c3 { @@ -373,7 +471,6 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -415,6 +512,23 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0 + >; + }; + pinctrl_j15: j15grp { fsl,pins = < MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 @@ -448,6 +562,22 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x130b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -602,3 +732,17 @@ vmmc-supply = <®_3p3v>; status = "okay"; }; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 58055ceec6dc..b72b6fa47580 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -146,6 +147,36 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -178,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 25 0>; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -213,7 +244,32 @@ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; - }; + }; + + ov5642: camera@3c { + compatible = "ovti,ov5642"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + reg = <0x3c>; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5642_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; }; &i2c2 { @@ -222,6 +278,32 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <&vgen4_reg>; /* 1.8v */ + AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 + rev B board is VGEN5 */ + DVDD-supply = <&vgen2_reg>; /* 1.5v*/ + powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + pmic: pfuze100@08 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -425,6 +507,36 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 1691714f13a2..c6bec97fbeaf 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -133,8 +133,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; }; reg_lcd0_pwr: regulator-lcd0-pwr { @@ -249,7 +248,7 @@ <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; - phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-handle = <&etnphy>; phy-supply = <®_3v3_etn>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 82dc5744ae19..b4fa7f1d63da 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -88,6 +88,7 @@ clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; + lrclk-strength = <3>; }; }; @@ -208,7 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 29 0>; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e426faa9c243..a9723b94bafa 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -156,7 +156,7 @@ <&clks IMX6QDL_CLK_GPU3D_CORE>, <&clks IMX6QDL_CLK_GPU3D_SHADER>; clock-names = "bus", "core", "shader"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; gpu_2d: gpu@00134000 { @@ -166,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>, <&clks IMX6QDL_CLK_GPU2D_CORE>; clock-names = "bus", "core"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; }; timer@00a00600 { @@ -434,7 +434,7 @@ clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; clock-names = "per", "ahb"; - power-domains = <&gpc 1>; + power-domains = <&pd_pu>; resets = <&src 1>; iram = <&ocram>; }; @@ -644,6 +644,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -658,6 +659,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -672,6 +674,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { @@ -797,19 +800,39 @@ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, <0 90 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, - <&clks IMX6QDL_CLK_GPU3D_SHADER>, - <&clks IMX6QDL_CLK_GPU2D_CORE>, - <&clks IMX6QDL_CLK_GPU2D_AXI>, - <&clks IMX6QDL_CLK_OPENVG_AXI>, - <&clks IMX6QDL_CLK_VPU_AXI>; - #power-domain-cells = <1>; + clocks = <&clks IMX6QDL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>, + <&clks IMX6QDL_CLK_GPU3D_SHADER>, + <&clks IMX6QDL_CLK_GPU2D_CORE>, + <&clks IMX6QDL_CLK_GPU2D_AXI>, + <&clks IMX6QDL_CLK_OPENVG_AXI>, + <&clks IMX6QDL_CLK_VPU_AXI>; + }; + }; }; gpr: iomuxc-gpr@020e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x020e0000 0x38>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + }; }; iomuxc: iomuxc@020e0000 { @@ -1135,7 +1158,16 @@ }; mipi_csi: mipi@021dc000 { + compatible = "fsl,imx6-mipi-csi2"; reg = <0x021dc000 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 100 0x04>, <0 101 0x04>; + clocks = <&clks IMX6QDL_CLK_HSI_TX>, + <&clks IMX6QDL_CLK_VIDEO_27M>, + <&clks IMX6QDL_CLK_EIM_PODF>; + clock-names = "dphy", "ref", "pix"; + status = "disabled"; }; mipi_dsi: mipi@021e0000 { @@ -1237,6 +1269,10 @@ ipu1_csi0: port@0 { reg = <0>; + + ipu1_csi0_from_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>; + }; }; ipu1_csi1: port@1 { diff --git a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts index 882b3bd97e07..547a76677ab3 100644 --- a/arch/arm/boot/dts/imx6qp-zii-rdu2.dts +++ b/arch/arm/boot/dts/imx6qp-zii-rdu2.dts @@ -41,8 +41,8 @@ /dts-v1/; -#include <imx6qp.dtsi> -#include <imx6qdl-zii-rdu2.dtsi> +#include "imx6qp.dtsi" +#include "imx6qdl-zii-rdu2.dtsi" / { model = "ZII RDU2+ Board"; diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 59453f2ac4ba..299d863690c5 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -120,6 +120,10 @@ <0 119 IRQ_TYPE_LEVEL_HIGH>; }; +&gpc { + compatible = "fsl,imx6qp-gpc", "fsl,imx6q-gpc"; +}; + &ipu1 { compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu"; fsl,prg = <&prg1>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index cc9572ea2860..3243af4a9984 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -530,6 +530,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -544,6 +545,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -558,6 +560,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2850000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 802da45aa551..c5578d1c1ee4 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -296,7 +296,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio4 10 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -374,7 +374,7 @@ cap-sdio-irq; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio7>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index d71da30c9cff..c0139d7e497a 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -128,3 +128,11 @@ reg = <1>; }; }; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 3f1416be4c36..f16b9df9d0c6 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -587,6 +587,7 @@ anatop-min-bit-val = <4>; anatop-min-voltage = <800000>; anatop-max-voltage = <1375000>; + anatop-enable-bit = <0>; }; regulator-3p0 { @@ -601,6 +602,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; regulator-2p5 { @@ -615,6 +617,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2100000>; anatop-max-voltage = <2875000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi index 51095df33a90..aec5ccce0321 100644 --- a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi @@ -120,7 +120,7 @@ #address-cells = <1>; #size-cells = <0>; - brcmf: bcrmf@1 { + brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio2>; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index 7c5dd1b316ca..28d055e3f301 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index c784a0b75ca0..ec745eb3b6a8 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -173,8 +173,7 @@ regulator-max-microvolt = <3300000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; - enable-active-low; + gpio = <&gpio3 5 GPIO_ACTIVE_LOW>; }; reg_lcd_pwr: regulator-lcdpwr { @@ -308,7 +307,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -343,7 +342,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index b9d7d2d09402..6da2b77edd46 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -542,6 +542,7 @@ anatop-min-bit-val = <0>; anatop-min-voltage = <2625000>; anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; }; reg_arm: regulator-vddcore { diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 2d87489f9105..d7753f79937a 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -43,7 +43,7 @@ / { bl: backlight { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; }; reg_module_3v3: regulator-module-3v3 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 5d98e2b5d54b..e7998308861f 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -67,7 +67,7 @@ backlight-j20 { compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; status = "okay"; @@ -279,7 +279,7 @@ status = "okay"; rtc@68 { - compatible = "rv4162"; + compatible = "microcrystal,rv4162"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_rv4162>; reg = <0x68>; @@ -738,7 +738,7 @@ pinctrl_wdog1: wdog1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x75 >; }; }; diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts new file mode 100644 index 000000000000..e78c2c9cc28a --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico.dts @@ -0,0 +1,403 @@ +/* + * Copyright 2017 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "Technexion Pico i.MX7D Board"; + compatible = "technexion,imx7d-pico", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx7-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + status = "okay"; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_vref_1v8>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, + <&clks IMX7D_SAI1_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + no-1-8-v; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f + MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 + MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 + >; + }; + + pinctrl_usbotg1_pwr: usbotg_pwr { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index f6f7e78f8820..f2493bc63da4 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -17,9 +17,9 @@ #define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 -#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 #define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 5be01a1bf840..54c45402286b 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -52,47 +52,70 @@ reg = <0x80000000 0x80000000>; }; - regulators { - compatible = "simple-bus"; + spi4 { + compatible = "spi-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4>; + gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; + extended_io: gpio-expander@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; - enable-active-high; + registers-number = <1>; + spi-max-frequency = <100000>; }; + }; - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_can2_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; + reg_usb_otg2_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_vref_1v8: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vref-1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + reg_can2_3v3: regulator-can2-3v3 { + compatible = "regulator-fixed"; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "brcm_reg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; }; }; @@ -328,6 +351,11 @@ }; }; +&pcie { + reset-gpio = <&extended_io 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -342,6 +370,15 @@ status = "okay"; }; +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + &usbotg1 { vbus-supply = <®_usb_otg1_vbus>; status = "okay"; @@ -363,6 +400,19 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + wakeup-source; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_brcm>; + fsl,tuning-step = <2>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -387,6 +437,12 @@ pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x14 + >; + }; + pinctrl_ecspi3: ecspi3grp { fsl,pins = < MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 @@ -554,7 +610,6 @@ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 - MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ >; }; @@ -634,7 +689,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; @@ -642,5 +697,13 @@ fsl,pins = < MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 >; + + pinctrl_spi4: spi4grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x59 + MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x59 + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x59 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f6dee41a05d9..f46814a7ea44 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -42,6 +42,7 @@ */ #include "imx7s.dtsi" +#include <dt-bindings/reset/imx7-reset.h> / { cpus { @@ -127,6 +128,42 @@ fsl,num-rx-queues=<3>; status = "disabled"; }; + + pcie: pcie@0x33800000 { + compatible = "fsl,imx7d-pcie", "snps,dw-pcie"; + reg = <0x33800000 0x4000>, + <0x4ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, + <&clks IMX7D_PCIE_PHY_ROOT_CLK>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; + assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>, + <&clks IMX7D_PCIE_PHY_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX7_RESET_PCIEPHY>, + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; + reset-names = "pciephy", "apps"; + status = "disabled"; + }; }; &ca_funnel_ports { diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index d5237fd0fa65..07b63f8b7314 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -295,6 +295,7 @@ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; assigned-clock-rates = <400000000>; bus-width = <8>; + no-1-8-v; fsl,tuning-step = <2>; non-removable; status = "okay"; @@ -442,7 +443,7 @@ &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x74 + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 >; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index c4f12fd2e044..4cf6c458b583 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -42,6 +42,7 @@ */ #include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/power/imx7-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -119,7 +120,7 @@ #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; - interrupt-parent = <&intc>; + interrupt-parent = <&gpc>; ranges; funnel@30041000 { @@ -301,6 +302,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; #interrupt-cells = <3>; interrupt-controller; + interrupt-parent = <&intc>; reg = <0x31001000 0x1000>, <0x31002000 0x2000>, <0x31004000 0x2000>, @@ -309,6 +311,7 @@ timer { compatible = "arm,armv7-timer"; + interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -488,7 +491,8 @@ }; gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + compatible = "fsl,imx7d-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -516,6 +520,7 @@ anatop-min-bit-val = <8>; anatop-min-voltage = <800000>; anatop-max-voltage = <1200000>; + anatop-enable-bit = <0>; }; }; @@ -563,6 +568,27 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + #power-domain-cells = <1>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_pcie_phy: pgc-power-domain@IMX7_POWER_DOMAIN_PCIE_PHY { + #power-domain-cells = <0>; + reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + power-supply = <®_1p0d>; + }; + }; + }; }; aips2: aips-bus@30400000 { @@ -609,7 +635,7 @@ clocks = <&clks IMX7D_PWM1_ROOT_CLK>, <&clks IMX7D_PWM1_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -620,7 +646,7 @@ clocks = <&clks IMX7D_PWM2_ROOT_CLK>, <&clks IMX7D_PWM2_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -631,7 +657,7 @@ clocks = <&clks IMX7D_PWM3_ROOT_CLK>, <&clks IMX7D_PWM3_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -642,7 +668,7 @@ clocks = <&clks IMX7D_PWM4_ROOT_CLK>, <&clks IMX7D_PWM4_ROOT_CLK>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -934,8 +960,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC1_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -946,8 +972,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC2_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -958,8 +984,8 @@ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_IPG_ROOT_CLK>, + <&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>, <&clks IMX7D_USDHC3_ROOT_CLK>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 45ea57fafa18..7bb9df2c1460 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -75,7 +75,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; #cooling-cells = <2>; }; @@ -83,10 +83,17 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf01>; - clocks = <&cluster1_clk>; + clocks = <&clockgen 1 0>; }; }; + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -165,7 +172,7 @@ <0x0 0x20220520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; dma-coherent; status = "disabled"; }; @@ -216,41 +223,10 @@ }; clockgen: clocking@1ee1000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x1ee1000 0x10000>; - - sysclk: sysclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "sysclk"; - }; - - cga_pll1: pll@800 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0x800 0x10>; - clocks = <&sysclk>; - clock-output-names = "cga-pll1", "cga-pll1-div2", - "cga-pll1-div4"; - }; - - platform_clk: pll@c00 { - compatible = "fsl,qoriq-core-pll-2.0"; - #clock-cells = <1>; - reg = <0xc00 0x10>; - clocks = <&sysclk>; - clock-output-names = "platform-clk", "platform-clk-div2"; - }; - - cluster1_clk: clk0c0@0 { - compatible = "fsl,qoriq-core-mux-2.0"; - #clock-cells = <0>; - reg = <0x0 0x10>; - clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; - clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; - clock-output-names = "cluster1-clk"; - }; + compatible = "fsl,ls1021a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; }; tmu: tmu@1f00000 { @@ -338,7 +314,7 @@ reg = <0x0 0x2100000 0x0 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -351,7 +327,7 @@ reg = <0x0 0x2110000 0x0 0x10000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "dspi"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; spi-num-chipselects = <6>; big-endian; status = "disabled"; @@ -364,7 +340,7 @@ reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -375,7 +351,7 @@ reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -386,7 +362,7 @@ reg = <0x0 0x21a0000 0x0 0x10000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; status = "disabled"; }; @@ -479,7 +455,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2960000 0x0 0x1000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -488,7 +464,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2970000 0x0 0x1000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -497,7 +473,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2980000 0x0 0x1000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -506,7 +482,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2990000 0x0 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -515,7 +491,7 @@ compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x29a0000 0x0 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "ipg"; status = "disabled"; }; @@ -524,7 +500,7 @@ compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; + clocks = <&clockgen 4 1>; clock-names = "wdog-en"; big-endian; }; @@ -534,8 +510,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, @@ -548,8 +524,8 @@ compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>, <&platform_clk 1>, - <&platform_clk 1>, <&platform_clk 1>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, @@ -569,16 +545,16 @@ dma-channels = <32>; big-endian; clock-names = "dmamux0", "dmamux1"; - clocks = <&platform_clk 1>, - <&platform_clk 1>; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; }; dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 0>, - <&platform_clk 0>; + clocks = <&clockgen 4 0>, + <&clockgen 4 0>; clock-names = "dcu", "pix"; big-endian; status = "disabled"; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 37f95427616f..acdf12ad0622 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -78,6 +78,7 @@ interrupts = <27 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; @@ -163,6 +164,7 @@ interrupts = <26 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; + eeprom-length = <512>; ports { #address-cells = <1>; |