diff options
| author | Linus Torvalds | 2012-05-26 12:57:47 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2012-05-26 12:57:47 -0700 |
| commit | 84a442b9a16ee69243ce7fce5d6f6f9c3fbdee68 (patch) | |
| tree | 332a0c901d8ab2ffb19b8ce14b4b094bf5b08657 /arch/arm | |
| parent | 39b6cc668c5ecc66f6f9c9293ffab681cb6f7065 (diff) | |
| parent | deb88cc3c69975cbd9875ed9fac259b351f6b64d (diff) | |
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc device tree conversions (part 2) from Olof Johansson:
"These continue the device tree work from part 1, this set is for the
tegra, mxs and imx platforms, all of which have dependencies on clock
or pinctrl changes submitted earlier."
Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: dt: tegra: invert status=disable vs status=okay
ARM: dt: tegra: consistent basic property ordering
ARM: dt: tegra: sort nodes based on bus order
ARM: dt: tegra: remove duplicate device_type property
ARM: dt: tegra: consistenly use lower-case for hex constants
ARM: dt: tegra: format regs properties consistently
ARM: dt: tegra: gpio comment cleanup
ARM: dt: tegra: remove unnecessary unit addresses
ARM: dt: tegra: whitespace cleanup
ARM: dt: tegra cardhu: fix typo in SDHCI node name
ARM: dt: tegra: cardhu: register core regulator tps62361
ARM: dt: tegra30.dtsi: Add SMMU node
ARM: dt: tegra20.dtsi: Add GART node
ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
ARM: dt: tegra: Add device tree support for AHB
ARM: dts: enable audio support for imx28-evk
ARM: dts: enable i2c device for imx28-evk
i2c: mxs: add device tree probe support
ARM: dts: enable mmc for imx28-evk
...
Diffstat (limited to 'arch/arm')
48 files changed, 2447 insertions, 771 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 515c8c85cbbb..5e7601301b41 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -459,6 +459,7 @@ config ARCH_MXS select COMMON_CLK select HAVE_CLK_PREPARE select PINCTRL + select USE_OF help Support for Freescale MXS-based family of processors diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e561adc1db0c..01a134141216 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -209,6 +209,14 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. + config DEBUG_IMX6Q_UART2 + bool "i.MX6Q Debug UART2" + depends on SOC_IMX6Q + help + Say Y here if you want kernel low-level debugging support + on i.MX6Q UART2. This is correct for e.g. the SabreLite + board. + config DEBUG_IMX6Q_UART4 bool "i.MX6Q Debug UART4" depends on SOC_IMX6Q diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts new file mode 100644 index 000000000000..70bffa929b65 --- /dev/null +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -0,0 +1,43 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale i.MX23 Evaluation Kit"; + compatible = "fsl,imx23-evk", "fsl,imx23"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; + bus-width = <8>; + wp-gpios = <&gpio1 30 0>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi new file mode 100644 index 000000000000..8c5f9994f3fc --- /dev/null +++ b/arch/arm/boot/dts/imx23.dtsi @@ -0,0 +1,295 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&icoll>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x40000>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx23-icoll", "fsl,mxs-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + dma-apbh@80004000 { + compatible = "fsl,imx23-dma-apbh"; + reg = <0x80004000 2000>; + }; + + ecc@80008000 { + reg = <0x80008000 2000>; + status = "disabled"; + }; + + bch@8000a000 { + reg = <0x8000a000 2000>; + status = "disabled"; + }; + + gpmi@8000c000 { + reg = <0x8000c000 2000>; + status = "disabled"; + }; + + ssp0: ssp@80010000 { + reg = <0x80010000 2000>; + interrupts = <15 14>; + fsl,ssp-dma-channel = <1>; + status = "disabled"; + }; + + etm@80014000 { + reg = <0x80014000 2000>; + status = "disabled"; + }; + + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <18>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + duart_pins_a: duart@0 { + reg = <0>; + fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = <0x2020 0x2030 0x2040 + 0x2050 0x0082 0x0092 0x00a2 + 0x00b2 0x2000 0x2010 0x2060>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_pins_fixup: mmc0-pins-fixup { + fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pull-up = <0>; + }; + }; + + digctl@8001c000 { + reg = <0x8001c000 2000>; + status = "disabled"; + }; + + emi@80020000 { + reg = <0x80020000 2000>; + status = "disabled"; + }; + + dma-apbx@80024000 { + compatible = "fsl,imx23-dma-apbx"; + reg = <0x80024000 2000>; + }; + + dcp@80028000 { + reg = <0x80028000 2000>; + status = "disabled"; + }; + + pxp@8002a000 { + reg = <0x8002a000 2000>; + status = "disabled"; + }; + + ocotp@8002c000 { + reg = <0x8002c000 2000>; + status = "disabled"; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 2000>; + status = "disabled"; + }; + + lcdif@80030000 { + reg = <0x80030000 2000>; + status = "disabled"; + }; + + ssp1: ssp@80034000 { + reg = <0x80034000 2000>; + interrupts = <2 20>; + fsl,ssp-dma-channel = <2>; + status = "disabled"; + }; + + tvenc@80038000 { + reg = <0x80038000 2000>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clkctl@80040000 { + reg = <0x80040000 2000>; + status = "disabled"; + }; + + saif0: saif@80042000 { + reg = <0x80042000 2000>; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 2000>; + status = "disabled"; + }; + + saif1: saif@80046000 { + reg = <0x80046000 2000>; + status = "disabled"; + }; + + audio-out@80048000 { + reg = <0x80048000 2000>; + status = "disabled"; + }; + + audio-in@8004c000 { + reg = <0x8004c000 2000>; + status = "disabled"; + }; + + lradc@80050000 { + reg = <0x80050000 2000>; + status = "disabled"; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + status = "disabled"; + }; + + i2c@80058000 { + reg = <0x80058000 2000>; + status = "disabled"; + }; + + rtc@8005c000 { + reg = <0x8005c000 2000>; + status = "disabled"; + }; + + pwm@80064000 { + reg = <0x80064000 2000>; + status = "disabled"; + }; + + timrot@80068000 { + reg = <0x80068000 2000>; + status = "disabled"; + }; + + auart0: serial@8006c000 { + reg = <0x8006c000 0x2000>; + status = "disabled"; + }; + + auart1: serial@8006e000 { + reg = <0x8006e000 0x2000>; + status = "disabled"; + }; + + duart: serial@80070000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80070000 0x2000>; + interrupts = <0>; + status = "disabled"; + }; + + usbphy@8007c000 { + reg = <0x8007c000 0x2000>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usbctrl@80080000 { + reg = <0x80080000 0x10000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index a51a08fc2af9..2b0ff60247a4 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -27,22 +27,22 @@ status = "okay"; }; - uart@1000a000 { + serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; - uart@1000b000 { + serial@1000b000 { fsl,uart-has-rtscts; status = "okay"; }; - uart@1000c000 { + serial@1000c000 { fsl,uart-has-rtscts; status = "okay"; }; - fec@1002b000 { + ethernet@1002b000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc5e7d5ddd54..2b1a166d41f9 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -59,28 +59,28 @@ status = "disabled"; }; - uart1: uart@1000a000 { + uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; status = "disabled"; }; - uart2: uart@1000b000 { + uart2: serial@1000b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; status = "disabled"; }; - uart3: uart@1000c000 { + uart3: serial@1000c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; status = "disabled"; }; - uart4: uart@1000d000 { + uart4: serial@1000d000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; @@ -183,14 +183,14 @@ status = "disabled"; }; - uart5: uart@1001b000 { + uart5: serial@1001b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; status = "disabled"; }; - uart6: uart@1001c000 { + uart6: serial@1001c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; @@ -206,7 +206,7 @@ status = "disabled"; }; - fec: fec@1002b000 { + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 index 000000000000..ee520a529cb4 --- /dev/null +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -0,0 +1,114 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Freescale i.MX28 Evaluation Kit"; + compatible = "fsl,imx28-evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + status = "okay"; + }; + + ssp1: ssp@80012000 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi new file mode 100644 index 000000000000..4634cb861a59 --- /dev/null +++ b/arch/arm/boot/dts/imx28.dtsi @@ -0,0 +1,497 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&icoll>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + saif0 = &saif0; + saif1 = &saif1; + }; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3c900>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + hsadc@80002000 { + reg = <0x80002000 2000>; + interrupts = <13 87>; + status = "disabled"; + }; + + dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; + }; + + perfmon@80006000 { + reg = <0x80006000 800>; + interrupts = <27>; + status = "disabled"; + }; + + bch@8000a000 { + reg = <0x8000a000 2000>; + interrupts = <41>; + status = "disabled"; + }; + + gpmi@8000c000 { + reg = <0x8000c000 2000>; + interrupts = <42 88>; + status = "disabled"; + }; + + ssp0: ssp@80010000 { + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + status = "disabled"; + }; + + ssp1: ssp@80012000 { + reg = <0x80012000 2000>; + interrupts = <97 83>; + fsl,ssp-dma-channel = <1>; + status = "disabled"; + }; + + ssp2: ssp@80014000 { + reg = <0x80014000 2000>; + interrupts = <98 84>; + fsl,ssp-dma-channel = <2>; + status = "disabled"; + }; + + ssp3: ssp@80016000 { + reg = <0x80016000 2000>; + interrupts = <99 85>; + fsl,ssp-dma-channel = <3>; + status = "disabled"; + }; + + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + duart_pins_a: duart@0 { + reg = <0>; + fsl,pinmux-ids = <0x3102 0x3112>; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_a: mac0@0 { + reg = <0>; + fsl,pinmux-ids = <0x4000 0x4010 0x4020 + 0x4030 0x4040 0x4060 0x4070 + 0x4080 0x4100>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mac1_pins_a: mac1@0 { + reg = <0>; + fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 + 0x40e1 0x40b1 0x40c1>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = <0x2000 0x2010 0x2020 + 0x2030 0x2040 0x2050 0x2060 + 0x2070 0x2080 0x2090 0x20a0>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_cd_cfg: mmc0-cd-cfg { + fsl,pinmux-ids = <0x2090>; + fsl,pull-up = <0>; + }; + + mmc0_sck_cfg: mmc0-sck-cfg { + fsl,pinmux-ids = <0x20a0>; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + + i2c0_pins_a: i2c0@0 { + reg = <0>; + fsl,pinmux-ids = <0x3180 0x3190>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + saif0_pins_a: saif0@0 { + reg = <0>; + fsl,pinmux-ids = + <0x3140 0x3150 0x3160 0x3170>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + saif1_pins_a: saif1@0 { + reg = <0>; + fsl,pinmux-ids = <0x31a0>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + digctl@8001c000 { + reg = <0x8001c000 2000>; + interrupts = <89>; + status = "disabled"; + }; + + etm@80022000 { + reg = <0x80022000 2000>; + status = "disabled"; + }; + + dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; + }; + + dcp@80028000 { + reg = <0x80028000 2000>; + interrupts = <52 53 54>; + status = "disabled"; + }; + + pxp@8002a000 { + reg = <0x8002a000 2000>; + interrupts = <39>; + status = "disabled"; + }; + + ocotp@8002c000 { + reg = <0x8002c000 2000>; + status = "disabled"; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 2000>; + status = "disabled"; + }; + + lcdif@80030000 { + reg = <0x80030000 2000>; + interrupts = <38 86>; + status = "disabled"; + }; + + can0: can@80032000 { + reg = <0x80032000 2000>; + interrupts = <8>; + status = "disabled"; + }; + + can1: can@80034000 { + reg = <0x80034000 2000>; + interrupts = <9>; + status = "disabled"; + }; + + simdbg@8003c000 { + reg = <0x8003c000 200>; + status = "disabled"; + }; + + simgpmisel@8003c200 { + reg = <0x8003c200 100>; + status = "disabled"; + }; + + simsspsel@8003c300 { + reg = <0x8003c300 100>; + status = "disabled"; + }; + + simmemsel@8003c400 { + reg = <0x8003c400 100>; + status = "disabled"; + }; + + gpiomon@8003c500 { + reg = <0x8003c500 100>; + status = "disabled"; + }; + + simenet@8003c700 { + reg = <0x8003c700 100>; + status = "disabled"; + }; + + armjtag@8003c800 { + reg = <0x8003c800 100>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clkctl@80040000 { + reg = <0x80040000 2000>; + status = "disabled"; + }; + + saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 2000>; + status = "disabled"; + }; + + saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + status = "disabled"; + }; + + lradc@80050000 { + reg = <0x80050000 2000>; + status = "disabled"; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + interrupts = <45 66>; + status = "disabled"; + }; + + rtc@80056000 { + reg = <0x80056000 2000>; + interrupts = <28 29>; + status = "disabled"; + }; + + i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; + status = "disabled"; + }; + + i2c1: i2c@8005a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x8005a000 2000>; + interrupts = <110 69>; + status = "disabled"; + }; + + pwm@80064000 { + reg = <0x80064000 2000>; + status = "disabled"; + }; + + timrot@80068000 { + reg = <0x80068000 2000>; + status = "disabled"; + }; + + auart0: serial@8006a000 { + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + status = "disabled"; + }; + + auart1: serial@8006c000 { + reg = <0x8006c000 0x2000>; + interrupts = <113 72 73>; + status = "disabled"; + }; + + auart2: serial@8006e000 { + reg = <0x8006e000 0x2000>; + interrupts = <114 74 75>; + status = "disabled"; + }; + + auart3: serial@80070000 { + reg = <0x80070000 0x2000>; + interrupts = <115 76 77>; + status = "disabled"; + }; + + auart4: serial@80072000 { + reg = <0x80072000 0x2000>; + interrupts = <116 78 79>; + status = "disabled"; + }; + + duart: serial@80074000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80074000 0x1000>; + interrupts = <47>; + status = "disabled"; + }; + + usbphy0: usbphy@8007c000 { + reg = <0x8007c000 0x2000>; + status = "disabled"; + }; + + usbphy1: usbphy@8007e000 { + reg = <0x8007e000 0x2000>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usbctrl0: usbctrl@80080000 { + reg = <0x80080000 0x10000>; + status = "disabled"; + }; + + usbctrl1: usbctrl@80090000 { + reg = <0x80090000 0x10000>; + status = "disabled"; + }; + + dflpt@800c0000 { + reg = <0x800c0000 0x10000>; + status = "disabled"; + }; + + mac0: ethernet@800f0000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f0000 0x4000>; + interrupts = <101>; + status = "disabled"; + }; + + mac1: ethernet@800f4000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f4000 0x4000>; + interrupts = <102>; + status = "disabled"; + }; + + switch@800f8000 { + reg = <0x800f8000 0x8000>; + status = "disabled"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9949e6060dee..de065b5976e6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x90000000 0x20000000>; }; @@ -40,7 +36,7 @@ status = "okay"; }; - uart3: uart@7000c000 { + uart3: serial@7000c000 { fsl,uart-has-rtscts; status = "okay"; }; @@ -166,6 +162,11 @@ }; }; }; + + ssi2: ssi@70014000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; }; wdog@73f98000 { /* WDOG1 */ @@ -177,12 +178,12 @@ reg = <0x73fa8000 0x4000>; }; - uart1: uart@73fbc000 { + uart1: serial@73fbc000 { fsl,uart-has-rtscts; status = "okay"; }; - uart2: uart@73fc0000 { + uart2: serial@73fc0000 { status = "okay"; }; }; @@ -195,13 +196,20 @@ i2c@83fc4000 { /* I2C2 */ status = "okay"; - codec: sgtl5000@0a { + sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clock-frequency = <26000000>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; }; }; - fec@83fec000 { + audmux@83fd0000 { + status = "okay"; + }; + + ethernet@83fec000 { phy-mode = "mii"; status = "okay"; }; @@ -218,4 +226,18 @@ gpio-key,wakeup; }; }; + + sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 6663986fe1c8..bfa65abe8ef2 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -86,7 +86,7 @@ status = "disabled"; }; - uart3: uart@7000c000 { + uart3: serial@7000c000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; @@ -102,6 +102,15 @@ status = "disabled"; }; + ssi2: ssi@70014000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x70014000 0x4000>; + interrupts = <30>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + esdhc@70020000 { /* ESDHC3 */ compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; @@ -171,14 +180,14 @@ status = "disabled"; }; - uart1: uart@73fbc000 { + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart2: uart@73fc0000 { + uart2: serial@73fc0000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; @@ -235,7 +244,31 @@ status = "disabled"; }; - fec@83fec000 { + ssi1: ssi@83fcc000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x83fcc000 0x4000>; + interrupts = <29>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + audmux@83fd0000 { + compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; + reg = <0x83fd0000 0x4000>; + status = "disabled"; + }; + + ssi3: ssi@83fe8000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x83fe8000 0x4000>; + interrupts = <96>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 2dccce46ed81..5b8eafcdbeec 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Automotive Reference Design Board"; compatible = "fsl,imx53-ard", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -44,7 +40,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 5bac4aa4800b..9c798034675e 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Evaluation Kit"; compatible = "fsl,imx53-evk", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x80000000>; }; @@ -75,7 +71,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; @@ -99,7 +95,7 @@ }; }; - fec@63fec000 { + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 5c57c8672c36..2d803a9a6949 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Quick Start Board"; compatible = "fsl,imx53-qsb", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -33,6 +29,11 @@ status = "okay"; }; + ssi2: ssi@50014000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; + esdhc@50020000 { /* ESDHC3 */ cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; @@ -49,7 +50,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; @@ -62,9 +63,11 @@ i2c@63fc4000 { /* I2C2 */ status = "okay"; - codec: sgtl5000@0a { + sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; }; }; @@ -77,12 +80,88 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; + + regulators { + buck0 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + ldo4 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo12 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + }; + + ldo13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + }; }; }; - fec@63fec000 { + audmux@63fd0000 { + status = "okay"; + }; + + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; @@ -122,4 +201,30 @@ linux,default-trigger = "heartbeat"; }; }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx53-qsb-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-qsb-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <5>; + }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 139138a556b0..08091029168e 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Smart Mobile Reference Design Board"; compatible = "fsl,imx53-smd", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -39,7 +35,7 @@ status = "okay"; }; - uart3: uart@5000c000 { + uart3: serial@5000c000 { fsl,uart-has-rtscts; status = "okay"; }; @@ -90,11 +86,11 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; - uart2: uart@53fc0000 { + uart2: serial@53fc0000 { status = "okay"; }; }; @@ -142,7 +138,7 @@ }; }; - fec@63fec000 { + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 5dd91b942c91..e3e869470cd3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - uart3: uart@5000c000 { + uart3: serial@5000c000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; @@ -104,6 +104,15 @@ status = "disabled"; }; + ssi2: ssi@50014000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <30>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + esdhc@50020000 { /* ESDHC3 */ compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; @@ -173,14 +182,14 @@ status = "disabled"; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart2: uart@53fc0000 { + uart2: serial@53fc0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; @@ -226,7 +235,7 @@ status = "disabled"; }; - uart4: uart@53ff0000 { + uart4: serial@53ff0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; @@ -241,7 +250,7 @@ reg = <0x60000000 0x10000000>; ranges; - uart5: uart@63f90000 { + uart5: serial@63f90000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; @@ -290,7 +299,31 @@ status = "disabled"; }; - fec@63fec000 { + ssi1: ssi@63fcc000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x63fcc000 0x4000>; + interrupts = <29>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + audmux@63fd0000 { + compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; + reg = <0x63fd0000 0x4000>; + status = "disabled"; + }; + + ssi3: ssi@63fe8000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x63fe8000 0x4000>; + interrupts = <96>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + ethernet@63fec000 { compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d2eaf521c9fd..db4c6096c562 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -17,19 +17,14 @@ model = "Freescale i.MX6 Quad Armadillo2 Board"; compatible = "fsl,imx6q-arm2", "fsl,imx6q"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait"; - }; - memory { reg = <0x10000000 0x80000000>; }; soc { aips-bus@02100000 { /* AIPS2 */ - enet@02188000 { + ethernet@02188000 { phy-mode = "rgmii"; - local-mac-address = [00 04 9F 01 1B 61]; status = "okay"; }; @@ -37,16 +32,20 @@ cd-gpios = <&gpio6 11 0>; wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_1>; status = "okay"; }; - uart4: uart@021f0000 { + uart4: serial@021f0000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 4663a4e5a285..e0ec92973e7e 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -22,8 +22,30 @@ }; soc { + aips-bus@02000000 { /* AIPS1 */ + spba-bus@02000000 { + ecspi@02008000 { /* eCSPI1 */ + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + }; + + ssi1: ssi@02028000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; + }; + + }; + aips-bus@02100000 { /* AIPS2 */ - enet@02188000 { + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; @@ -43,13 +65,23 @@ status = "okay"; }; - uart2: uart@021e8000 { + audmux@021d8000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + }; + + uart2: serial@021e8000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2_1>; }; i2c@021a0000 { /* I2C1 */ status = "okay"; clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; @@ -80,4 +112,18 @@ regulator-always-on; }; }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts new file mode 100644 index 000000000000..07509a181178 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6Q SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + + aips-bus@02000000 { /* AIPS1 */ + spba-bus@02000000 { + uart1: serial@02020000 { + status = "okay"; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + ethernet@02188000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usdhc@02194000 { /* uSDHC2 */ + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 4905f51a106f..8c90cbac945f 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -165,7 +165,7 @@ status = "disabled"; }; - uart1: uart@02020000 { + uart1: serial@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; @@ -177,19 +177,31 @@ interrupts = <0 51 0x04>; }; - ssi@02028000 { /* SSI1 */ + ssi1: ssi@02028000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <38 37>; + status = "disabled"; }; - ssi@0202c000 { /* SSI2 */ + ssi2: ssi@0202c000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <42 41>; + status = "disabled"; }; - ssi@02030000 { /* SSI3 */ + ssi3: ssi@02030000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <46 45>; + status = "disabled"; }; asrc@02034000 { @@ -346,6 +358,90 @@ compatible = "fsl,imx6q-anatop"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2000000>; + anatop-max-voltage = <2750000>; + }; + + regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; }; usbphy@020c9000 { /* USBPHY1 */ @@ -386,7 +482,62 @@ }; iomuxc@020e0000 { + compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; + + /* shared pinctrl settings */ + audmux { + pinctrl_audmux_1: audmux-1 { + fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + }; + }; + + serial2 { + pinctrl_serial2_1: serial2grp-1 { + fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ + 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */ + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + }; + }; + + usdhc4 { + pinctrl_usdhc4_1: usdhc4grp-1 { + fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -422,7 +573,7 @@ reg = <0x0217c000 0x4000>; }; - enet@02188000 { + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; @@ -527,7 +678,9 @@ }; audmux@021d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; + status = "disabled"; }; mipi@021dc000 { /* MIPI-CSI */ @@ -543,28 +696,28 @@ interrupts = <0 18 0x04>; }; - uart2: uart@021e8000 { + uart2: serial@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; status = "disabled"; }; - uart3: uart@021ec000 { + uart3: serial@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; status = "disabled"; }; - uart4: uart@021f0000 { + uart4: serial@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; status = "disabled"; }; - uart5: uart@021f4000 { + uart5: serial@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 4a166357172b..36321bceec46 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -7,10 +7,10 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; memory { - reg = < 0x80000000 0x40000000 >; + reg = <0x80000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -64,42 +64,40 @@ }; serial@70006000 { - clock-frequency = < 408000000 >; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - status = "disable"; - }; - - serial@70006400 { - status = "disable"; + status = "okay"; + clock-frequency = <408000000>; }; i2c@7000c000 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <88 0x04>; /*gpio PL0 */ + }; }; i2c@7000c700 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <100000>; wm8903: wm8903@1a { @@ -115,46 +113,41 @@ micdet-delay = <100>; gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; }; sdhci@78000000 { + status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; }; - sdhci@78000200 { - status = "disable"; - }; - - sdhci@78000400 { - status = "disable"; - }; - - sdhci@78000400 { + sdhci@78000600 { + status = "okay"; support-8bit; bus-width = <8>; }; - ahub@70080000 { - i2s@70080300 { - status = "disable"; - }; - - i2s@70080500 { - status = "disable"; - }; - - i2s@70080600 { - status = "disable"; - }; - - i2s@70080700 { - status = "disable"; - }; - }; - sound { compatible = "nvidia,tegra-audio-wm8903-cardhu", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 7cd513ac5ea6..7de701365fce 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -6,11 +6,11 @@ model = "NVIDIA Tegra2 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; - memory@0 { - reg = < 0x00000000 0x40000000 >; + memory { + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -234,42 +234,81 @@ }; }; - pmc@7000f400 { - nvidia,invert-interrupt; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; }; i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; + pmc { + nvidia,invert-interrupt; + }; + + usb@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; + bus-width = <8>; }; sound { @@ -295,51 +334,4 @@ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ - bus-width = <4>; - }; - - sdhci@c8000400 { - status = "disable"; - }; - - sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; - bus-width = <8>; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 8d625e4c5de5..bfeb117d5aea 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -6,11 +6,11 @@ model = "Toshiba AC100 / Dynabook AZ"; compatible = "compal,paz00", "nvidia,tegra20"; - memory@0 { + memory { reg = <0x00000000 0x20000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -226,7 +226,22 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + serial@70006200 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; alc5632: alc5632@1e { @@ -238,25 +253,23 @@ }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; - i2c@7000c500 { - status = "disable"; - }; - - nvec@7000c500 { - #address-cells = <1>; - #size-cells = <0>; + nvec { compatible = "nvidia,nvec"; - reg = <0x7000C500 0x100>; + reg = <0x7000c500 0x100>; interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; clock-frequency = <80000>; - request-gpios = <&gpio 170 0>; + request-gpios = <&gpio 170 0>; /* gpio PV2 */ slave-addr = <138>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; adt7461@4c { @@ -265,66 +278,29 @@ }; }; - i2s@70002a00 { - status = "disable"; - }; - - sound { - compatible = "nvidia,tegra-audio-alc5632-paz00", - "nvidia,tegra-audio-alc5632"; - - nvidia,model = "Compal PAZ00"; - - nvidia,audio-routing = - "Int Spk", "SPKOUT", - "Int Spk", "SPKOUTN", - "Headset Mic", "MICBIAS1", - "MIC1", "Headset Mic", - "Headset Stereophone", "HPR", - "Headset Stereophone", "HPL", - "DMICDAT", "Digital Mic"; - - nvidia,audio-codec = <&alc5632>; - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - }; - - serial@70006000 { - clock-frequency = <216000000>; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - clock-frequency = <216000000>; + usb@c5000000 { + status = "okay"; }; - serial@70006300 { - status = "disable"; + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ }; - serial@70006400 { - status = "disable"; + usb@c5008000 { + status = "okay"; }; sdhci@c8000000 { + status = "okay"; cd-gpios = <&gpio 173 0>; /* gpio PV5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 169 0>; /* gpio PV1 */ bus-width = <4>; }; - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - status = "disable"; - }; - sdhci@c8000600 { + status = "okay"; support-8bit; bus-width = <8>; }; @@ -345,12 +321,28 @@ wifi { label = "wifi-led"; - gpios = <&gpio 24 0>; + gpios = <&gpio 24 0>; /* gpio PD0 */ linux,default-trigger = "rfkill0"; }; }; - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + sound { + compatible = "nvidia,tegra-audio-alc5632-paz00", + "nvidia,tegra-audio-alc5632"; + + nvidia,model = "Compal PAZ00"; + + nvidia,audio-routing = + "Int Spk", "SPKOUT", + "Int Spk", "SPKOUTN", + "Headset Mic", "MICBIAS1", + "MIC1", "Headset Mic", + "Headset Stereophone", "HPR", + "Headset Stereophone", "HPL", + "DMICDAT", "Digital Mic"; + + nvidia,audio-codec = <&alc5632>; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 315971993cfd..89cb7f2acd92 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -7,11 +7,10 @@ compatible = "nvidia,seaboard", "nvidia,tegra20"; memory { - device_type = "memory"; - reg = < 0x00000000 0x40000000 >; + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -100,7 +99,7 @@ }; hdint { nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1", - "lsck", "lsda", "pta"; + "lsck", "lsda"; nvidia,function = "hdmi"; }; i2cp { @@ -134,6 +133,10 @@ nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -254,96 +257,138 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + /* ALS and proximity sensor */ + isl29018@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <202 0x04>; /* GPIO PZ2 */ + }; + + gyrometer@68 { + compatible = "invn,mpu3050"; + reg = <0x68>; + interrupt-parent = <&gpio>; + interrupts = <204 0x04>; /* gpio PZ4 */ }; }; i2c@7000c400 { - clock-frequency = <400000>; + status = "okay"; + clock-frequency = <100000>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; - adt7461@4c { - compatible = "adt7461"; + temperature-sensor@4c { + compatible = "nct1008"; reg = <0x4c>; }; - }; - - i2s@70002a00 { - status = "disable"; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-seaboard", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Seaboard"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1R", "Mic Jack"; - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ - }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; + magnetometer@c { + compatible = "ak8975"; + reg = <0xc>; + interrupt-parent = <&gpio>; + interrupts = <109 0x04>; /* gpio PN5 */ + }; }; - serial@70006200 { - status = "disable"; - }; + emc { + emc-table@190000 { + reg = <190000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <190000>; + nvidia,emc-registers = <0x0000000c 0x00000026 + 0x00000009 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x0000059f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000b 0x000000c8 + 0x00000003 0x00000007 0x00000004 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xa06204ae + 0x007dc010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; - serial@70006300 { - clock-frequency = < 216000000 >; + emc-table@380000 { + reg = <380000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <380000>; + nvidia,emc-registers = <0x00000017 0x0000004b + 0x00000012 0x00000006 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000b5f + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe044048b + 0x007d8010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; }; - serial@70006400 { - status = "disable"; + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; }; - sdhci@c8000000 { - status = "disable"; + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; - sdhci@c8000200 { - status = "disable"; + usb@c5008000 { + status = "okay"; }; sdhci@c8000400 { + status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ @@ -351,15 +396,11 @@ }; sdhci@c8000600 { + status = "okay"; support-8bit; bus-width = <8>; }; - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ - dr_mode = "otg"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -380,45 +421,25 @@ }; }; - emc@7000f400 { - emc-table@190000 { - reg = < 190000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 190000 >; - nvidia,emc-registers = < 0x0000000c 0x00000026 - 0x00000009 0x00000003 0x00000004 0x00000004 - 0x00000002 0x0000000c 0x00000003 0x00000003 - 0x00000002 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x0000059f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000003 0x00000001 0x0000000b 0x000000c8 - 0x00000003 0x00000007 0x00000004 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xa06204ae - 0x007dc010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; + sound { + compatible = "nvidia,tegra-audio-wm8903-seaboard", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Seaboard"; - emc-table@380000 { - reg = < 380000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 380000 >; - nvidia,emc-registers = < 0x00000017 0x0000004b - 0x00000012 0x00000006 0x00000004 0x00000005 - 0x00000003 0x0000000c 0x00000006 0x00000006 - 0x00000003 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x00000b5f - 0x00000000 0x00000003 0x00000003 0x00000006 - 0x00000006 0x00000001 0x00000011 0x000000c8 - 0x00000003 0x0000000e 0x00000007 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xe044048b - 0x007d8010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - }; + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1R", "Mic Jack"; - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index e4fcf9a8178a..9de5636023f6 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -6,11 +6,11 @@ model = "Compulab TrimSlice board"; compatible = "compulab,trimslice", "nvidia,tegra20"; - memory@0 { - reg = < 0x00000000 0x40000000 >; + memory { + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -240,72 +240,67 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; - }; - - i2c@7000d000 { - status = "disable"; - }; - - i2s@70002800 { - status = "disable"; - }; - - i2s@70002a00 { - status = "disable"; - }; - das@70000c00 { - status = "disable"; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; + codec: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; - serial@70006040 { - status = "disable"; + rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; }; - serial@70006200 { - status = "disable"; + usb@c5000000 { + status = "okay"; }; - serial@70006300 { - status = "disable"; + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ }; - serial@70006400 { - status = "disable"; + usb@c5008000 { + status = "okay"; }; sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - status = "disable"; + status = "okay"; + bus-width = <4>; }; sdhci@c8000600 { - cd-gpios = <&gpio 121 0>; - wp-gpios = <&gpio 122 0>; + status = "okay"; + cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + bus-width = <4>; }; - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; }; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index b922a26747e7..445343b0fbdd 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -7,10 +7,10 @@ compatible = "nvidia,ventana", "nvidia,tegra20"; memory { - reg = < 0x00000000 0x40000000 >; + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -240,38 +240,82 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + /* ALS and proximity sensor */ + isl29018@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <202 0x04>; /*gpio PZ2 */ }; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; + usb@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + support-8bit; + bus-width = <8>; }; sound { @@ -294,51 +338,7 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - support-8bit; - bus-width = <8>; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 108e894a8926..c417d67e9027 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,207 +4,242 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; - pmc@7000f400 { - compatible = "nvidia,tegra20-pmc"; - reg = <0x7000e400 0x400>; - }; - - intc: interrupt-controller@50041000 { + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; + reg = <0x50041000 0x1000 + 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; - reg = < 0x50041000 0x1000 >, - < 0x50040100 0x0100 >; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 56 0x04 - 0 57 0x04>; - }; - - apbdma: dma@6000a000 { + apbdma: dma { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 >; - }; - - i2c@7000c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - interrupts = < 0 38 0x04 >; - }; - - i2c@7000c400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - interrupts = < 0 84 0x04 >; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04>; + }; + + ahb { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; + + gpio: gpio { + compatible = "nvidia,tegra20-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; - i2c@7000c500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - interrupts = < 0 92 0x04 >; + pinmux: pinmux { + compatible = "nvidia,tegra20-pinmux"; + reg = <0x70000014 0x10 /* Tri-state registers */ + 0x70000080 0x20 /* Mux registers */ + 0x700000a0 0x14 /* Pull-up/down registers */ + 0x70000868 0xa8>; /* Pad control registers */ }; - i2c@7000d000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c-dvc"; - reg = <0x7000D000 0x200>; - interrupts = < 0 53 0x04 >; + das { + compatible = "nvidia,tegra20-das"; + reg = <0x70000c00 0x80>; }; tegra_i2s1: i2s@70002800 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002800 0x200>; - interrupts = < 0 13 0x04 >; - nvidia,dma-request-selector = < &apbdma 2 >; + interrupts = <0 13 0x04>; + nvidia,dma-request-selector = <&apbdma 2>; + status = "disable"; }; tegra_i2s2: i2s@70002a00 { compatible = "nvidia,tegra20-i2s"; reg = <0x70002a00 0x200>; - interrupts = < 0 3 0x04 >; - nvidia,dma-request-selector = < &apbdma 1 >; - }; - - das@70000c00 { - compatible = "nvidia,tegra20-das"; - reg = <0x70000c00 0x80>; - }; - - gpio: gpio@6000d000 { - compatible = "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 >; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - }; - - pinmux: pinmux@70000000 { - compatible = "nvidia,tegra20-pinmux"; - reg = < 0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8 >; /* Pad control registers */ + interrupts = <0 3 0x04>; + nvidia,dma-request-selector = <&apbdma 1>; + status = "disable"; }; serial@70006000 { compatible = "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = < 0 36 0x04 >; + interrupts = <0 36 0x04>; + status = "disable"; }; serial@70006040 { compatible = "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = < 0 37 0x04 >; + interrupts = <0 37 0x04>; + status = "disable"; }; serial@70006200 { compatible = "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = < 0 46 0x04 >; + interrupts = <0 46 0x04>; + status = "disable"; }; serial@70006300 { compatible = "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = < 0 90 0x04 >; + interrupts = <0 90 0x04>; + status = "disable"; }; serial@70006400 { compatible = "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = < 0 91 0x04 >; + interrupts = <0 91 0x04>; + status = "disable"; }; - emc@7000f400 { + i2c@7000c000 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x200>; + status = "disable"; }; - sdhci@c8000000 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000000 0x200>; - interrupts = < 0 14 0x04 >; + i2c@7000c400 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@c8000200 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000200 0x200>; - interrupts = < 0 15 0x04 >; + i2c@7000c500 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@c8000400 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000400 0x200>; - interrupts = < 0 19 0x04 >; + i2c@7000d000 { + compatible = "nvidia,tegra20-i2c-dvc"; + reg = <0x7000d000 0x200>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@c8000600 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000600 0x200>; - interrupts = < 0 31 0x04 >; + pmc { + compatible = "nvidia,tegra20-pmc"; + reg = <0x7000e400 0x400>; + }; + + mc { + compatible = "nvidia,tegra20-mc"; + reg = <0x7000f000 0x024 + 0x7000f03c 0x3c4>; + interrupts = <0 77 0x04>; + }; + + gart { + compatible = "nvidia,tegra20-gart"; + reg = <0x7000f024 0x00000018 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + }; + + emc { + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x200>; + #address-cells = <1>; + #size-cells = <0>; }; usb@c5000000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5000000 0x4000>; - interrupts = < 0 20 0x04 >; + interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; + status = "disable"; }; usb@c5004000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5004000 0x4000>; - interrupts = < 0 21 0x04 >; + interrupts = <0 21 0x04>; phy_type = "ulpi"; + status = "disable"; }; usb@c5008000 { compatible = "nvidia,tegra20-ehci", "usb-ehci"; reg = <0xc5008000 0x4000>; - interrupts = < 0 97 0x04 >; + interrupts = <0 97 0x04>; phy_type = "utmi"; + status = "disable"; + }; + + sdhci@c8000000 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000000 0x200>; + interrupts = <0 14 0x04>; + status = "disable"; }; -}; + sdhci@c8000200 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000200 0x200>; + interrupts = <0 15 0x04>; + status = "disable"; + }; + + sdhci@c8000400 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000400 0x200>; + interrupts = <0 19 0x04>; + status = "disable"; + }; + + sdhci@c8000600 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000600 0x200>; + interrupts = <0 31 0x04>; + status = "disable"; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 56 0x04 + 0 57 0x04>; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 15200a949a81..2dcc09e784b5 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,190 +4,193 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; - pmc@7000f400 { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; - reg = <0x7000e400 0x400>; - }; - - intc: interrupt-controller@50041000 { + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; + reg = <0x50041000 0x1000 + 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; - reg = < 0x50041000 0x1000 >, - < 0x50040100 0x0100 >; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04>; - }; - - apbdma: dma@6000a000 { + apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04 >; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; }; - i2c@7000c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - interrupts = < 0 38 0x04 >; - }; - - i2c@7000c400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - interrupts = < 0 84 0x04 >; + ahb: ahb { + compatible = "nvidia,tegra30-ahb"; + reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */ }; - i2c@7000c500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - interrupts = < 0 92 0x04 >; - }; - - i2c@7000c700 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c700 0x100>; - interrupts = < 0 120 0x04 >; - }; - - i2c@7000d000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000D000 0x100>; - interrupts = < 0 53 0x04 >; - }; - - gpio: gpio@6000d000 { + gpio: gpio { compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04 >; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; interrupt-controller; }; + pinmux: pinmux { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0xd0 /* Pad control registers */ + 0x70003000 0x3e0>; /* Mux registers */ + }; + serial@70006000 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = < 0 36 0x04 >; + interrupts = <0 36 0x04>; + status = "disable"; }; serial@70006040 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = < 0 37 0x04 >; + interrupts = <0 37 0x04>; + status = "disable"; }; serial@70006200 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = < 0 46 0x04 >; + interrupts = <0 46 0x04>; + status = "disable"; }; serial@70006300 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = < 0 90 0x04 >; + interrupts = <0 90 0x04>; + status = "disable"; }; serial@70006400 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = < 0 91 0x04 >; + interrupts = <0 91 0x04>; + status = "disable"; }; - sdhci@78000000 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000000 0x200>; - interrupts = < 0 14 0x04 >; + i2c@7000c000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000200 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000200 0x200>; - interrupts = < 0 15 0x04 >; + i2c@7000c400 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000400 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000400 0x200>; - interrupts = < 0 19 0x04 >; + i2c@7000c500 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000600 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000600 0x200>; - interrupts = < 0 31 0x04 >; + i2c@7000c700 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - pinmux: pinmux@70000000 { - compatible = "nvidia,tegra30-pinmux"; - reg = < 0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0 >; /* Mux registers */ + i2c@7000d000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + pmc { + compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + + mc { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x010 + 0x7000f03c 0x1b4 + 0x7000f200 0x028 + 0x7000f284 0x17c>; + interrupts = <0 77 0x04>; + }; + + smmu { + compatible = "nvidia,tegra30-smmu"; + reg = <0x7000f010 0x02c + 0x7000f1f0 0x010 + 0x7000f228 0x05c>; + nvidia,#asids = <4>; /* # of ASIDs */ + dma-window = <0 0x40000000>; /* IOVA start & length */ + nvidia,ahb = <&ahb>; }; ahub { compatible = "nvidia,tegra30-ahub"; - reg = <0x70080000 0x200 0x70080200 0x100>; - interrupts = < 0 103 0x04 >; + reg = <0x70080000 0x200 + 0x70080200 0x100>; + interrupts = <0 103 0x04>; nvidia,dma-request-selector = <&apbdma 1>; ranges; @@ -198,30 +201,71 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; + status = "disable"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; + status = "disable"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; + status = "disable"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; + status = "disable"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; + status = "disable"; }; }; + + sdhci@78000000 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + status = "disable"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + status = "disable"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + status = "disable"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + status = "disable"; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04>; + }; }; diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 1ebbf451c48d..5406c23a02e3 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,6 +22,7 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y +CONFIG_MACH_MXS_DT=y CONFIG_MACH_MX23EVK=y CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 3851d8a27875..05541cf4a878 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index b8a382defb23..fcd94f3b0f0e 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -31,6 +31,11 @@ static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", }; static const char *per_root_sel[] = { "per_podf", "ipg", }; static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; +static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", }; +static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", }; +static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", }; +static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", }; +static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; @@ -71,6 +76,11 @@ enum imx5_clks { pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw, ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate, usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root, + ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel, + ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred, + ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred, + ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, + ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, clk_max }; @@ -195,6 +205,28 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14); clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24); + clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels)); + clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels)); + clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels)); + clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels)); + clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3); + clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6); + clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3); + clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6); + clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3); + clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6); + clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3); + clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6); + clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18); + clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22); + clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26); + clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28); + clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30); + for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX5 clk %d: register failed with %ld\n", @@ -237,6 +269,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); + clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); + clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); clk_register_clkdev(clk[cpu_podf], "cpu", NULL); clk_register_clkdev(clk[iim_gate], "iim", NULL); @@ -320,6 +354,9 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3"); + clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); + clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); + clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -406,6 +443,9 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3"); + clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); + clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); + clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f40a35da2e5c..cab02d0a15d6 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -155,7 +155,8 @@ enum mx6q_clks { gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, - pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, clk_max + pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, + ssi2_ipg, ssi3_ipg, clk_max }; static struct clk *clk[clk_max]; @@ -367,9 +368,9 @@ int __init mx6q_clocks_init(void) clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); - clk[ssi1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); - clk[ssi2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); - clk[ssi3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); + clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); + clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -392,17 +393,17 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); clk_register_clkdev(clk[usboh3], NULL, "usboh3"); - clk_register_clkdev(clk[uart_serial], "per", "2020000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart"); - clk_register_clkdev(clk[enet], NULL, "2188000.enet"); + clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial"); + clk_register_clkdev(clk[enet], NULL, "2188000.ethernet"); clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc"); clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc"); clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc"); @@ -418,6 +419,10 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma"); clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog"); clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi"); + clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); + clk_register_clkdev(clk[ahb], "ahb", NULL); + clk_register_clkdev(clk[cko1], "cko1", NULL); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { c = clk_get_sys(clks_init_on[i], NULL); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 574eca4b89a5..eb04b6248e48 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -10,6 +10,9 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> @@ -81,6 +84,19 @@ static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { { /* sentinel */ } }; +static void __init imx53_qsb_init(void) +{ + struct clk *clk; + + clk = clk_get_sys(NULL, "ssi_ext1"); + if (IS_ERR(clk)) { + pr_err("failed to get clk ssi_ext1\n"); + return; + } + + clk_register_clkdev(clk, NULL, "0-000a"); +} + static void __init imx53_dt_init(void) { struct device_node *node; @@ -99,6 +115,9 @@ static void __init imx53_dt_init(void) of_node_put(node); } + if (of_machine_is_compatible("fsl,imx53-qsb")) + imx53_qsb_init(); + of_platform_populate(NULL, of_default_bus_match_table, imx53_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index 0213f8dcee81..c40a34c00489 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -17,6 +17,12 @@ #include <mach/hardware.h> static struct map_desc imx_lluart_desc = { +#ifdef CONFIG_DEBUG_IMX6Q_UART2 + .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR), + .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR), + .length = MX6Q_UART2_SIZE, + .type = MT_DEVICE, +#endif #ifdef CONFIG_DEBUG_IMX6Q_UART4 .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR), .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR), diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3df360a52c17..b47e98b7d539 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/clk.h> +#include <linux/clkdev.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> @@ -64,18 +66,53 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - /* min rx data delay */ - phy_write(phydev, 0x0b, 0x8105); - phy_write(phydev, 0x0c, 0x0000); + if (IS_ENABLED(CONFIG_PHYLIB)) { + /* min rx data delay */ + phy_write(phydev, 0x0b, 0x8105); + phy_write(phydev, 0x0c, 0x0000); - /* max rx/tx clock delay, min rx/tx control delay */ - phy_write(phydev, 0x0b, 0x8104); - phy_write(phydev, 0x0c, 0xf0f0); - phy_write(phydev, 0x0b, 0x104); + /* max rx/tx clock delay, min rx/tx control delay */ + phy_write(phydev, 0x0b, 0x8104); + phy_write(phydev, 0x0c, 0xf0f0); + phy_write(phydev, 0x0b, 0x104); + } return 0; } +static void __init imx6q_sabrelite_cko1_setup(void) +{ + struct clk *cko1_sel, *ahb, *cko1; + unsigned long rate; + + cko1_sel = clk_get_sys(NULL, "cko1_sel"); + ahb = clk_get_sys(NULL, "ahb"); + cko1 = clk_get_sys(NULL, "cko1"); + if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) { + pr_err("cko1 setup failed!\n"); + goto put_clk; + } + clk_set_parent(cko1_sel, ahb); + rate = clk_round_rate(cko1, 16000000); + clk_set_rate(cko1, rate); + clk_register_clkdev(cko1, NULL, "0-000a"); +put_clk: + if (!IS_ERR(cko1_sel)) + clk_put(cko1_sel); + if (!IS_ERR(ahb)) + clk_put(ahb); + if (!IS_ERR(cko1)) + clk_put(cko1); +} + +static void __init imx6q_sabrelite_init(void) +{ + if (IS_ENABLED(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + imx6q_sabrelite_cko1_setup(); +} + static void __init imx6q_init_machine(void) { /* @@ -85,8 +122,7 @@ static void __init imx6q_init_machine(void) pinctrl_provide_dummies(); if (of_machine_is_compatible("fsl,imx6q-sabrelite")) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); + imx6q_sabrelite_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -139,6 +175,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f719..517672ebcbc5 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -163,6 +163,12 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, MX51_PAD_CSPI1_SS0__GPIO4_24, MX51_PAD_CSPI1_SS1__GPIO4_25, + + /* Audio */ + MX51_PAD_AUD3_BB_TXD__AUD3_TXD, + MX51_PAD_AUD3_BB_RXD__AUD3_RXD, + MX51_PAD_AUD3_BB_CK__AUD3_TXC, + MX51_PAD_AUD3_BB_FS__AUD3_TXFS, }; /* Serial ports */ diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 07d5383d68ee..91cf0625819c 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -7,18 +7,28 @@ config MXS_OCOTP config SOC_IMX23 bool + select ARM_AMBA select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX23 config SOC_IMX28 bool + select ARM_AMBA select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX28 comment "MXS platforms:" +config MACH_MXS_DT + bool "Support MXS platforms from device tree" + select SOC_IMX23 + select SOC_IMX28 + help + Include support for Freescale MXS platforms(i.MX23 and i.MX28) + using the device tree for discovery + config MACH_STMP378X_DEVB bool "Support STMP378x_devb Platform" select SOC_IMX23 diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 6ce21a26412e..e41590ccb437 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -4,6 +4,7 @@ obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index b8913df4cfa2..19659de1c4e8 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,6 +1,5 @@ config MXS_HAVE_AMBA_DUART bool - select ARM_AMBA config MXS_HAVE_PLATFORM_AUART bool diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c index 6a0202b1016c..46824501de00 100644 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -14,7 +14,7 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -static struct platform_device *__init mxs_add_dma(const char *devid, +struct platform_device *__init mxs_add_dma(const char *devid, resource_size_t base) { struct resource res[] = { @@ -29,22 +29,3 @@ static struct platform_device *__init mxs_add_dma(const char *devid, res, ARRAY_SIZE(res), NULL, 0, DMA_BIT_MASK(32)); } - -static int __init mxs_add_mxs_dma(void) -{ - char *apbh = "mxs-dma-apbh"; - char *apbx = "mxs-dma-apbx"; - - if (cpu_is_mx23()) { - mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR); - mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR); - } - - if (cpu_is_mx28()) { - mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR); - mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR); - } - - return 0; -} -arch_initcall(mxs_add_mxs_dma); diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c index ed0885e414e0..cd99f19ec637 100644 --- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -14,7 +14,7 @@ #include <mach/devices-common.h> struct platform_device *__init mxs_add_gpio( - int id, resource_size_t iobase, int irq) + char *name, int id, resource_size_t iobase, int irq) { struct resource res[] = { { @@ -29,25 +29,5 @@ struct platform_device *__init mxs_add_gpio( }; return platform_device_register_resndata(&mxs_apbh_bus, - "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); + name, id, res, ARRAY_SIZE(res), NULL, 0); } - -static int __init mxs_add_mxs_gpio(void) -{ - if (cpu_is_mx23()) { - mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); - mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); - mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); - } - - if (cpu_is_mx28()) { - mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); - mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); - mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); - mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); - mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); - } - - return 0; -} -postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c index bef9d923f54e..b33c9d05c552 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -17,8 +17,9 @@ #include <mach/mx28.h> #include <mach/devices-common.h> -#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \ +#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \ .dma = soc ## _DMA_SSP ## hwid, \ @@ -26,23 +27,23 @@ .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \ } -#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \ - [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid) +#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \ + [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) #ifdef CONFIG_SOC_IMX23 const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX23, 0, 1), - mxs_mxs_mmc_data_entry(MX23, 1, 2), + mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1), + mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2), }; #endif #ifdef CONFIG_SOC_IMX28 const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX28, 0, 0), - mxs_mxs_mmc_data_entry(MX28, 1, 1), - mxs_mxs_mmc_data_entry(MX28, 2, 2), - mxs_mxs_mmc_data_entry(MX28, 3, 3), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3), }; #endif @@ -70,6 +71,6 @@ struct platform_device *__init mxs_add_mxs_mmc( }, }; - return mxs_add_platform_device("mxs-mmc", data->id, + return mxs_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 84af61cf6a62..de6c7ba42544 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -18,17 +18,20 @@ extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); extern void mx23_soc_init(void); -extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); extern void mx23_map_io(void); extern void mx23_init_irq(void); extern void mx28_soc_init(void); -extern int mx28_register_gpios(void); extern int mx28_clocks_init(void); extern void mx28_map_io(void); extern void mx28_init_irq(void); extern void icoll_init_irq(void); +extern struct platform_device *mxs_add_dma(const char *devid, + resource_size_t base); +extern struct platform_device *mxs_add_gpio(char *name, int id, + resource_size_t iobase, int irq); + #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 21e45a70d344..e8b1d958240b 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -82,8 +82,9 @@ struct platform_device * __init mxs_add_mxs_i2c( const struct mxs_mxs_i2c_data *data); /* mmc */ -#include <mach/mmc.h> +#include <linux/mmc/mxs-mmc.h> struct mxs_mxs_mmc_data { + const char *devid; int id; resource_size_t iobase; resource_size_t dma; diff --git a/arch/arm/mach-mxs/include/mach/mmc.h b/arch/arm/mach-mxs/include/mach/mmc.h deleted file mode 100644 index 211547a05564..000000000000 --- a/arch/arm/mach-mxs/include/mach/mmc.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MXS_MMC_H__ -#define __MACH_MXS_MMC_H__ - -struct mxs_mmc_platform_data { - int wp_gpio; /* write protect pin */ - unsigned int flags; -#define SLOTF_4_BIT_CAPABLE (1 << 0) -#define SLOTF_8_BIT_CAPABLE (1 << 1) -}; -#endif /* __MACH_MXS_MMC_H__ */ diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c new file mode 100644 index 000000000000..8cac94b33020 --- /dev/null +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -0,0 +1,121 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/init.h> +#include <linux/irqdomain.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static int __init mxs_icoll_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); + + return 0; +} + +static int __init mxs_gpio_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + static int gpio_irq_base = MXS_GPIO_IRQ_START; + + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); + gpio_irq_base += 32; + + return 0; +} + +static const struct of_device_id mxs_irq_match[] __initconst = { + { .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, }, + { .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, }, + { /* sentinel */ } +}; + +static void __init mxs_dt_init_irq(void) +{ + icoll_init_irq(); + of_irq_init(mxs_irq_match); +} + +static void __init imx23_timer_init(void) +{ + mx23_clocks_init(); +} + +static struct sys_timer imx23_timer = { + .init = imx23_timer_init, +}; + +static void __init imx28_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer imx28_timer = { + .init = imx28_timer_init, +}; + +static void __init imx28_evk_init(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + +static void __init mxs_machine_init(void) +{ + if (of_machine_is_compatible("fsl,imx28-evk")) + imx28_evk_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +} + +static const char *imx23_dt_compat[] __initdata = { + "fsl,imx23-evk", + "fsl,imx23", + NULL, +}; + +static const char *imx28_dt_compat[] __initdata = { + "fsl,imx28-evk", + "fsl,imx28", + NULL, +}; + +DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") + .map_io = mx23_map_io, + .init_irq = mxs_dt_init_irq, + .timer = &imx23_timer, + .init_machine = mxs_machine_init, + .dt_compat = imx23_dt_compat, + .restart = mxs_restart, +MACHINE_END + +DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") + .map_io = mx28_map_io, + .init_irq = mxs_dt_init_irq, + .timer = &imx28_timer, + .init_machine = mxs_machine_init, + .dt_compat = imx28_dt_compat, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index 67a384edcf5b..dccb67a9e7c4 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -66,9 +66,25 @@ void __init mx28_init_irq(void) void __init mx23_soc_init(void) { pinctrl_provide_dummies(); + + mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); } void __init mx28_soc_init(void) { pinctrl_provide_dummies(); + + mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); } diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8ddda365f1a0..761e45f9456f 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -24,6 +24,8 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #define UART_PADDR MX53_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX6Q_UART2) +#define UART_PADDR MX6Q_UART2_BASE_ADDR #elif defined (CONFIG_DEBUG_IMX6Q_UART4) #define UART_PADDR MX6Q_UART4_BASE_ADDR #endif diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h index 254a561a2799..f7e7dbac8f4b 100644 --- a/arch/arm/plat-mxc/include/mach/mx6q.h +++ b/arch/arm/plat-mxc/include/mach/mx6q.h @@ -27,6 +27,8 @@ #define MX6Q_CCM_SIZE 0x4000 #define MX6Q_ANATOP_BASE_ADDR 0x020c8000 #define MX6Q_ANATOP_SIZE 0x1000 +#define MX6Q_UART2_BASE_ADDR 0x021e8000 +#define MX6Q_UART2_SIZE 0x4000 #define MX6Q_UART4_BASE_ADDR 0x021f0000 #define MX6Q_UART4_SIZE 0x4000 |