Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
author: Linus Torvalds 2012-03-27 18:17:02 -0700
committer: Linus Torvalds 2012-03-27 18:17:02 -0700
commit: 9e4db1c3eed55c22328d8022c2c80adb3093833f (patch)
tree: 9643545e6bd182f1d3e19942f590a6a1e3198320 /arch/arm
parent: de8856d2c11f562c60ed9340a83db4a4f829a6e6 (diff)
parent: aae528d9a8ad79d4b21b1b723abc9447fdb0d200 (diff)
48 files changed, 1153 insertions, 1744 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 94422601ea5b..5098564d5879 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -738,7 +738,6 @@ config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
 	select FIQ
-	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
@@ -767,6 +766,7 @@ config ARCH_SA1100
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
 	select NEED_MACH_MEMORY_H
+	select SPARSE_IRQ
 	help
 	  Support for StrongARM 11x0 based boards.
 
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 81a933eb0903..3bb1d7589bd9 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -35,9 +35,6 @@ config DMABOUNCE
 	bool
 	select ZONE_DMA
 
-config TIMER_ACORN
-	bool
-
 config SHARP_LOCOMO
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ea9b6f3607a..69feafe7286c 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
-obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 61691cdbdcf2..9173d112ea01 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -16,6 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -28,9 +29,8 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/mach-types.h>
 #include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
@@ -86,8 +86,10 @@
 #define IRQ_S1_CD_VALID		(52)
 #define IRQ_S0_BVD1_STSCHG	(53)
 #define IRQ_S1_BVD1_STSCHG	(54)
+#define SA1111_IRQ_NR		(55)
 
-extern void __init sa1110_mb_enable(void);
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
 
 /*
  * We keep the following data for the overall SA1111.  Note that the
@@ -104,6 +106,7 @@ struct sa1111 {
 	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
+	struct sa1111_platform_data *pdata;
 #ifdef CONFIG_PM
 	void		*saved_state;
 #endif
@@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111;
 struct sa1111_dev_info {
 	unsigned long	offset;
 	unsigned long	skpcr_mask;
+	bool		dma;
 	unsigned int	devid;
 	unsigned int	irq[6];
 };
@@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_USB,
 		.skpcr_mask	= SKPCR_UCLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_USB,
 		.irq = {
 			IRQ_USBPWR,
@@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= 0x0600,
 		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_SAC,
 		.irq = {
 			AUDXMTDMADONEA,
@@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_KBD,
 		.skpcr_mask	= SKPCR_PTCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_KBD,
 		.irq = {
 			IRQ_TPRXINT,
 			IRQ_TPTXINT
@@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_MSE,
 		.skpcr_mask	= SKPCR_PMCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_MSE,
 		.irq = {
 			IRQ_MSRXINT,
 			IRQ_MSTXINT
@@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = {
 	.irq_set_wake	= sa1111_wake_highirq,
 };
 
-static void sa1111_setup_irq(struct sa1111 *sachip)
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 {
 	void __iomem *irqbase = sachip->base + SA1111_INTC;
-	unsigned int irq;
+	unsigned i, irq;
+	int ret;
 
 	/*
 	 * We're guaranteed that this region hasn't been taken.
 	 */
 	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
 
+	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+			SA1111_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	sachip->irq_base = ret;
+
 	/* disable all IRQs */
 	sa1111_writel(0, irqbase + SA1111_INTEN0);
 	sa1111_writel(0, irqbase + SA1111_INTEN1);
@@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
 
-	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
+	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_low_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
+	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_high_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
@@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	irq_set_handler_data(sachip->irq, sachip);
 	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+
+	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+	return 0;
 }
 
 /*
@@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 }
 #endif
 
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-#endif
-
 static void sa1111_dev_release(struct device *_dev)
 {
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 
-	release_resource(&dev->res);
 	kfree(dev);
 }
 
@@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		      struct sa1111_dev_info *info)
 {
 	struct sa1111_dev *dev;
+	unsigned i;
 	int ret;
 
 	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
 	if (!dev) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_alloc;
 	}
 
+	device_initialize(&dev->dev);
 	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
 	dev->dev.release = sa1111_dev_release;
-	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
 	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
-
-	ret = request_resource(parent, &dev->res);
-	if (ret) {
-		printk("SA1111: failed to allocate resource for %s\n",
-			dev->res.name);
-		dev_set_name(&dev->dev, NULL);
-		kfree(dev);
-		goto out;
-	}
-
 
-	ret = device_register(&dev->dev);
-	if (ret) {
-		release_resource(&dev->res);
-		kfree(dev);
-		goto out;
-	}
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
+		dev->irq[i] = sachip->irq_base + info->irq[i];
 
-#ifdef CONFIG_DMABOUNCE
 	/*
-	 * If the parent device has a DMA mask associated with it,
-	 * propagate it down to the children.
+	 * If the parent device has a DMA mask associated with it, and
+	 * this child supports DMA, propagate it down to the children.
 	 */
-	if (sachip->dev->dma_mask) {
+	if (info->dma && sachip->dev->dma_mask) {
 		dev->dma_mask = *sachip->dev->dma_mask;
 		dev->dev.dma_mask = &dev->dma_mask;
+		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+	}
 
-		if (dev->dma_mask != 0xffffffffUL) {
-			ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret) {
-				dev_err(&dev->dev, "SA1111: Failed to register"
-					" with dmabounce\n");
-				device_unregister(&dev->dev);
-			}
-		}
+	ret = request_resource(parent, &dev->res);
+	if (ret) {
+		dev_err(sachip->dev, "failed to allocate resource for %s\n",
+			dev->res.name);
+		goto err_resource;
 	}
-#endif
 
-out:
+	ret = device_add(&dev->dev);
+	if (ret)
+		goto err_add;
+	return 0;
+
+ err_add:
+	release_resource(&dev->res);
+ err_resource:
+	put_device(&dev->dev);
+ err_alloc:
 	return ret;
 }
 
@@ -698,16 +683,21 @@ out:
  *	Returns:
  *	%-ENODEV	device not found.
  *	%-EBUSY		physical address already marked in-use.
+ *	%-EINVAL	no platform data passed
  *	%0		successful.
  */
 static int __devinit
 __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
 	unsigned long id;
 	unsigned int has_devs;
 	int i, ret = -ENODEV;
 
+	if (!pd)
+		return -EINVAL;
+
 	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
 	if (!sachip)
 		return -ENOMEM;
@@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	sachip->dev = me;
 	dev_set_drvdata(sachip->dev, sachip);
 
+	sachip->pdata = pd;
 	sachip->phys = mem->start;
 	sachip->irq = irq;
 
@@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 */
 	sa1111_wake(sachip);
 
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	if (sachip->irq != NO_IRQ) {
+		ret = sa1111_setup_irq(sachip, pd->irq_base);
+		if (ret)
+			goto err_unmap;
+	}
+
 #ifdef CONFIG_ARCH_SA1100
 	{
 	unsigned int val;
@@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	}
 #endif
 
-	/*
-	 * The interrupt controller must be initialised before any
-	 * other device to ensure that the interrupts are available.
-	 */
-	if (sachip->irq != NO_IRQ)
-		sa1111_setup_irq(sachip);
-
 	g_sa1111 = sachip;
 
 	has_devs = ~0;
-	if (machine_is_assabet() || machine_is_jornada720() ||
-	    machine_is_badge4())
-		has_devs &= ~(1 << 4);
-	else
-		has_devs &= ~(1 << 1);
+	if (pd)
+		has_devs &= ~pd->disable_devs;
 
 	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
-		if (has_devs & (1 << i))
+		if (sa1111_devices[i].devid & has_devs)
 			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
 
 	return 0;
@@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 static int sa1111_remove_one(struct device *dev, void *data)
 {
-	device_unregister(dev);
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	device_del(&sadev->dev);
+	release_resource(&sadev->res);
+	put_device(&sadev->dev);
 	return 0;
 }
 
@@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
 	if (sachip->irq != NO_IRQ) {
 		irq_set_chained_handler(sachip->irq, NULL);
 		irq_set_handler_data(sachip->irq, NULL);
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 
 		release_mem_region(sachip->phys + SA1111_INTC, 512);
 	}
@@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
 	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
 
+	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+
 	base = sachip->base + SA1111_INTC;
 	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
 	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
@@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	 */
 	val = sa1111_readl(sachip->base + SA1111_SKCR);
 	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
 
 	clk_disable(sachip->clk);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
+#ifdef CONFIG_ARCH_SA1100
+	sa1110_mb_disable();
+#endif
+
 	return 0;
 }
 
@@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev)
 	 */
 	sa1111_wake(sachip);
 
+#ifdef CONFIG_ARCH_SA1100
+	/* Enable the memory bus request/grant signals */
+	sa1110_mb_enable();
+#endif
+
 	/*
 	 * Only lock for write ops. Also, sa1111_wake must be called with
 	 * released spinlock!
@@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = {
 	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io);
  *	sa1111_enable_device - enable an on-chip SA1111 function block
  *	@sadev: SA1111 function block device to enable
  */
-void sa1111_enable_device(struct sa1111_dev *sadev)
+int sa1111_enable_device(struct sa1111_dev *sadev)
 {
 	struct sa1111 *sachip = sa1111_chip_driver(sadev);
 	unsigned long flags;
 	unsigned int val;
+	int ret = 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
-	spin_unlock_irqrestore(&sachip->lock, flags);
+	if (sachip->pdata && sachip->pdata->enable)
+		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+	if (ret == 0) {
+		spin_lock_irqsave(&sachip->lock, flags);
+		val = sa1111_readl(sachip->base + SA1111_SKPCR);
+		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		spin_unlock_irqrestore(&sachip->lock, flags);
+	}
+	return ret;
 }
 EXPORT_SYMBOL(sa1111_enable_device);
 
@@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	val = sa1111_readl(sachip->base + SA1111_SKPCR);
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	if (sachip->pdata && sachip->pdata->disable)
+		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
 }
 EXPORT_SYMBOL(sa1111_disable_device);
 
@@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
-	return dev->devid == drv->devid;
+	return dev->devid & drv->devid;
 }
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
@@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev)
 	return ret;
 }
 
+static void sa1111_bus_shutdown(struct device *dev)
+{
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+	if (drv && drv->shutdown)
+		drv->shutdown(SA1111_DEV(dev));
+}
+
 static int sa1111_bus_probe(struct device *dev)
 {
 	struct sa1111_dev *sadev = SA1111_DEV(dev);
@@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = {
 	.remove		= sa1111_bus_remove,
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
+	.shutdown	= sa1111_bus_shutdown,
 };
 EXPORT_SYMBOL(sa1111_bus_type);
 
@@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
 }
 EXPORT_SYMBOL(sa1111_driver_unregister);
 
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller.  If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+	/*
+	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+	 * User's Guide" mentions that jumpers R51 and R52 control the
+	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+	 * SDRAM bank 1 on Neponset). The default configuration selects
+	 * Assabet, so any address in bank 1 is necessarily invalid.
+	 */
+	return (machine_is_assabet() || machine_is_pfs168()) &&
+		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
+
+static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
+	void *data)
+{
+	struct sa1111_dev *dev = SA1111_DEV(data);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
+			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+					sa1111_needs_bounce);
+			if (ret)
+				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
+		}
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
+			dmabounce_unregister_dev(&dev->dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sa1111_bus_notifier = {
+	.notifier_call = sa1111_notifier_call,
+};
+#endif
+
 static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
+#ifdef CONFIG_DMABOUNCE
+	if (ret == 0)
+		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	if (ret == 0)
 		platform_driver_register(&sa1111_device_driver);
 	return ret;
@@ -1360,6 +1446,9 @@ static int __init sa1111_init(void)
 static void __exit sa1111_exit(void)
 {
 	platform_driver_unregister(&sa1111_device_driver);
+#ifdef CONFIG_DMABOUNCE
+	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	bus_unregister(&sa1111_bus_type);
 }
 
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 92ed254c175b..7c2bbc7f0be1 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -132,34 +132,10 @@
 #define SKPCR_DCLKEN	(1<<7)
 #define SKPCR_PWMCLKEN	(1<<8)
 
-/*
- * USB Host controller
- */
+/* USB Host controller */
 #define SA1111_USB		0x0400
 
 /*
- * Offsets from SA1111_USB_BASE
- */
-#define SA1111_USB_STATUS	0x0118
-#define SA1111_USB_RESET	0x011c
-#define SA1111_USB_IRQTEST	0x0120
-
-#define USB_RESET_FORCEIFRESET	(1 << 0)
-#define USB_RESET_FORCEHCRESET	(1 << 1)
-#define USB_RESET_CLKGENRESET	(1 << 2)
-#define USB_RESET_SIMSCALEDOWN	(1 << 3)
-#define USB_RESET_USBINTTEST	(1 << 4)
-#define USB_RESET_SLEEPSTBYEN	(1 << 5)
-#define USB_RESET_PWRSENSELOW	(1 << 6)
-#define USB_RESET_PWRCTRLLOW	(1 << 7)
-
-#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
-#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
-#define USB_STATUS_NIRQHCIM       (1 <<  9)
-#define USB_STATUS_NHCIMFCLR      (1 << 10)
-#define USB_STATUS_USBPWRSENSE    (1 << 11)
-
-/*
  * Serial Audio Controller
  *
  * Registers
@@ -327,22 +303,6 @@
  *    PC_SSR		GPIO Block C Sleep State
  */
 
-#define _PA_DDR		_SA1111( 0x1000 )
-#define _PA_DRR		_SA1111( 0x1004 )
-#define _PA_DWR		_SA1111( 0x1004 )
-#define _PA_SDR		_SA1111( 0x1008 )
-#define _PA_SSR		_SA1111( 0x100c )
-#define _PB_DDR		_SA1111( 0x1010 )
-#define _PB_DRR		_SA1111( 0x1014 )
-#define _PB_DWR		_SA1111( 0x1014 )
-#define _PB_SDR		_SA1111( 0x1018 )
-#define _PB_SSR		_SA1111( 0x101c )
-#define _PC_DDR		_SA1111( 0x1020 )
-#define _PC_DRR		_SA1111( 0x1024 )
-#define _PC_DWR		_SA1111( 0x1024 )
-#define _PC_SDR		_SA1111( 0x1028 )
-#define _PC_SSR		_SA1111( 0x102c )
-
 #define SA1111_GPIO	0x1000
 
 #define SA1111_GPIO_PADDR	(0x000)
@@ -425,106 +385,30 @@
 #define SA1111_WAKEPOL0		0x0034
 #define SA1111_WAKEPOL1		0x0038
 
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers
- *    PS2CR		Control Register
- *    PS2STAT		Status Register
- *    PS2DATA		Transmit/Receive Data register
- *    PS2CLKDIV		Clock Division Register
- *    PS2PRECNT		Clock Precount Register
- *    PS2TEST1		Test register 1
- *    PS2TEST2		Test register 2
- *    PS2TEST3		Test register 3
- *    PS2TEST4		Test register 4
- */
-
+/* PS/2 Trackpad and Mouse Interfaces */
 #define SA1111_KBD		0x0a00
 #define SA1111_MSE		0x0c00
 
-/*
- * These are offsets from the above bases.
- */
-#define SA1111_PS2CR		0x0000
-#define SA1111_PS2STAT		0x0004
-#define SA1111_PS2DATA		0x0008
-#define SA1111_PS2CLKDIV	0x000c
-#define SA1111_PS2PRECNT	0x0010
-
-#define PS2CR_ENA		0x08
-#define PS2CR_FKD		0x02
-#define PS2CR_FKC		0x01
-
-#define PS2STAT_STP		0x0100
-#define PS2STAT_TXE		0x0080
-#define PS2STAT_TXB		0x0040
-#define PS2STAT_RXF		0x0020
-#define PS2STAT_RXB		0x0010
-#define PS2STAT_ENA		0x0008
-#define PS2STAT_RXP		0x0004
-#define PS2STAT_KBD		0x0002
-#define PS2STAT_KBC		0x0001
+/* PCMCIA Interface */
+#define SA1111_PCMCIA		0x1600
 
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- */
-
-#define SA1111_PCMCIA	0x1600
-
-/*
- * These are offsets from the above base.
- */
-#define SA1111_PCCR	0x0000
-#define SA1111_PCSSR	0x0004
-#define SA1111_PCSR	0x0008
-
-#define PCSR_S0_READY	(1<<0)
-#define PCSR_S1_READY	(1<<1)
-#define PCSR_S0_DETECT	(1<<2)
-#define PCSR_S1_DETECT	(1<<3)
-#define PCSR_S0_VS1	(1<<4)
-#define PCSR_S0_VS2	(1<<5)
-#define PCSR_S1_VS1	(1<<6)
-#define PCSR_S1_VS2	(1<<7)
-#define PCSR_S0_WP	(1<<8)
-#define PCSR_S1_WP	(1<<9)
-#define PCSR_S0_BVD1	(1<<10)
-#define PCSR_S0_BVD2	(1<<11)
-#define PCSR_S1_BVD1	(1<<12)
-#define PCSR_S1_BVD2	(1<<13)
-
-#define PCCR_S0_RST	(1<<0)
-#define PCCR_S1_RST	(1<<1)
-#define PCCR_S0_FLT	(1<<2)
-#define PCCR_S1_FLT	(1<<3)
-#define PCCR_S0_PWAITEN	(1<<4)
-#define PCCR_S1_PWAITEN	(1<<5)
-#define PCCR_S0_PSE	(1<<6)
-#define PCCR_S1_PSE	(1<<7)
-
-#define PCSSR_S0_SLEEP	(1<<0)
-#define PCSSR_S1_SLEEP	(1<<1)
 
 
 
 
 extern struct bus_type sa1111_bus_type;
 
-#define SA1111_DEVID_SBI	0
-#define SA1111_DEVID_SK		1
-#define SA1111_DEVID_USB	2
-#define SA1111_DEVID_SAC	3
-#define SA1111_DEVID_SSP	4
-#define SA1111_DEVID_PS2	5
-#define SA1111_DEVID_GPIO	6
-#define SA1111_DEVID_INT	7
-#define SA1111_DEVID_PCMCIA	8
+#define SA1111_DEVID_SBI	(1 << 0)
+#define SA1111_DEVID_SK		(1 << 1)
+#define SA1111_DEVID_USB	(1 << 2)
+#define SA1111_DEVID_SAC	(1 << 3)
+#define SA1111_DEVID_SSP	(1 << 4)
+#define SA1111_DEVID_PS2	(3 << 5)
+#define SA1111_DEVID_PS2_KBD	(1 << 5)
+#define SA1111_DEVID_PS2_MSE	(1 << 6)
+#define SA1111_DEVID_GPIO	(1 << 7)
+#define SA1111_DEVID_INT	(1 << 8)
+#define SA1111_DEVID_PCMCIA	(1 << 9)
 
 struct sa1111_dev {
 	struct device	dev;
@@ -548,6 +432,7 @@ struct sa1111_driver {
 	int (*remove)(struct sa1111_dev *);
 	int (*suspend)(struct sa1111_dev *, pm_message_t);
 	int (*resume)(struct sa1111_dev *);
+	void (*shutdown)(struct sa1111_dev *);
 };
 
 #define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
@@ -555,9 +440,10 @@ struct sa1111_driver {
 #define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
 
 /*
- * These frob the SKPCR register.
+ * These frob the SKPCR register, and call platform specific
+ * enable/disable functions.
  */
-void sa1111_enable_device(struct sa1111_dev *);
+int sa1111_enable_device(struct sa1111_dev *);
 void sa1111_disable_device(struct sa1111_dev *);
 
 unsigned int sa1111_pll_clock(struct sa1111_dev *);
@@ -580,6 +466,10 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 
 struct sa1111_platform_data {
 	int	irq_base;	/* base for cascaded on-chip IRQs */
+	unsigned disable_devs;
+	void	*data;
+	int	(*enable)(void *, unsigned);
+	void	(*disable)(void *, unsigned);
 };
 
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f16d7652f34b..3a274878412e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
-obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 804c9122b7b3..e400d75d11ae 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -30,10 +30,7 @@
 
 #include <asm/mach/time.h>
 
-#define IRQ_MASK		0xfe000000	/* read */
-#define IRQ_MSET		0xfe000000	/* write */
-#define IRQ_STAT		0xff000000	/* read */
-#define IRQ_MCLR		0xff000000	/* write */
+#include "core.h"
 
 static void ebsa110_mask_irq(struct irq_data *d)
 {
@@ -79,22 +76,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
 	{	/* IRQ_STAT/IRQ_MCLR */
 		.virtual	= IRQ_STAT,
 		.pfn		= __phys_to_pfn(TRICK4_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK4_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* IRQ_MASK/IRQ_MSET */
 		.virtual	= IRQ_MASK,
 		.pfn		= __phys_to_pfn(TRICK3_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK3_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* SOFT_BASE */
 		.virtual	= SOFT_BASE,
 		.pfn		= __phys_to_pfn(TRICK1_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK1_SIZE,
 		.type		= MT_DEVICE
 	}, {	/* PIT_BASE */
 		.virtual	= PIT_BASE,
 		.pfn		= __phys_to_pfn(TRICK0_PHYS),
-		.length		= PGDIR_SIZE,
+		.length		= TRICK0_SIZE,
 		.type		= MT_DEVICE
 	},
 
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
new file mode 100644
index 000000000000..c93c9e43012d
--- /dev/null
+++ b/arch/arm/mach-ebsa110/core.h
@@ -0,0 +1,41 @@
+/*
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the core hardware definitions of the EBSA-110.
+ */
+#ifndef CORE_H
+#define CORE_H
+
+/* Physical addresses/sizes */
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK0_SIZE		PGDIR_SIZE
+#define TRICK1_PHYS		0xf2400000
+#define TRICK1_SIZE		PGDIR_SIZE
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK3_SIZE		PGDIR_SIZE
+#define TRICK4_PHYS		0xf3000000
+#define TRICK4_SIZE		PGDIR_SIZE
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+/* Virtual addresses */
+#define PIT_BASE		0xfc000000	/* trick 0 */
+#define SOFT_BASE		0xfd000000	/* trick 1 */
+#define IRQ_MASK		0xfe000000	/* trick 3 - read */
+#define IRQ_MSET		0xfe000000	/* trick 3 - write */
+#define IRQ_STAT		0xff000000	/* trick 4 - read */
+#define IRQ_MCLR		0xff000000	/* trick 4 - write */
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
index 4b2fb7743909..f4e5407bd004 100644
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -12,48 +12,9 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region	IO region
- * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
- * f0000e60 - f0000e64	398 - 399
- * f0000de0 - f0000dfc	378 - 37f  lp0
- * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region	IO region
- * f00014f1             a79        pnp write data
- * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
- * f00004f1		279        pnp address
- * f0000440 - f000046c  220 - 236  eth0
- * f0000405		203        pnp read data
- */
-
-#define ISAMEM_PHYS		0xe0000000
-#define ISAMEM_SIZE		0x10000000
-
-#define ISAIO_PHYS		0xf0000000
-#define ISAIO_SIZE		PGDIR_SIZE
-
-#define TRICK0_PHYS		0xf2000000
-#define TRICK1_PHYS		0xf2400000
-#define TRICK2_PHYS		0xf2800000
-#define TRICK3_PHYS		0xf2c00000
-#define TRICK4_PHYS		0xf3000000
-#define TRICK5_PHYS		0xf3400000
-#define TRICK6_PHYS		0xf3800000
-#define TRICK7_PHYS		0xf3c00000
-
 #define ISAMEM_BASE		0xe0000000
 #define ISAIO_BASE		0xf0000000
 
-#define PIT_BASE		0xfc000000
-#define SOFT_BASE		0xfd000000
-
 /*
  * RAM definitions
  */
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index c52e3047a7eb..756cc377a73d 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -177,6 +177,26 @@ void writesl(void __iomem *addr, const void *data, int len)
 }
 EXPORT_SYMBOL(writesl);
 
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
 #define SUPERIO_PORT(p) \
 	(((p) >> 3) == (0x3f8 >> 3) || \
 	 ((p) >> 3) == (0x2f8 >> 3) || \
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 6a6ea57c2a4e..d43121a30aa7 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -20,6 +20,8 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
+#include "core.h"
+
 static spinlock_t leds_lock;
 
 static void ebsa110_leds_event(led_event_t ledevt)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6ebd276aebeb..6bb3f47b1f14 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -223,6 +223,7 @@ static struct resource sa1111_resources[] = {
 
 static struct sa1111_platform_data sa1111_info = {
 	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
+	.disable_devs	= SA1111_DEVID_SAC,
 };
 
 static struct platform_device sa1111_device = {
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index dfa405c0cfde..992e28b4ae9a 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= dma.o fiq.o irq.o riscpc.o
+obj-y			:= dma.o ecard.o fiq.o irq.o riscpc.o time.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/mach-rpc/ecard.c
index 1651d4950744..b91bc87b3dcf 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -42,6 +42,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
+#include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/dma.h>
@@ -54,10 +55,6 @@
 
 #include "ecard.h"
 
-#ifndef CONFIG_ARCH_RPC
-#define HAVE_EXPMASK
-#endif
-
 struct ecard_request {
 	void		(*fn)(struct ecard_request *);
 	ecard_t		*ec;
@@ -77,9 +74,6 @@ struct expcard_blacklist {
 static ecard_t *cards;
 static ecard_t *slot_to_expcard[MAX_ECARDS];
 static unsigned int ectcr;
-#ifdef HAS_EXPMASK
-static unsigned int have_expmask;
-#endif
 
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
@@ -391,22 +385,10 @@ int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
 
 static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
 {
-#ifdef HAS_EXPMASK
-	if (irqnr < 4 && have_expmask) {
-		have_expmask |= 1 << irqnr;
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-#endif
 }
 
 static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
 {
-#ifdef HAS_EXPMASK
-	if (irqnr < 4 && have_expmask) {
-		have_expmask &= ~(1 << irqnr);
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-#endif
 }
 
 static int ecard_def_irq_pending(ecard_t *ec)
@@ -446,7 +428,7 @@ static expansioncard_ops_t ecard_default_ops = {
  */
 static void ecard_irq_unmask(struct irq_data *d)
 {
-	ecard_t *ec = slot_to_ecard(d->irq - 32);
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
 
 	if (ec) {
 		if (!ec->ops)
@@ -462,7 +444,7 @@ static void ecard_irq_unmask(struct irq_data *d)
 
 static void ecard_irq_mask(struct irq_data *d)
 {
-	ecard_t *ec = slot_to_ecard(d->irq - 32);
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
 
 	if (ec) {
 		if (!ec->ops)
@@ -579,7 +561,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (ec = cards; ec; ec = ec->next) {
 		int pending;
 
-		if (!ec->claimed || ec->irq == NO_IRQ || ec->slot_no == 8)
+		if (!ec->claimed || !ec->irq || ec->slot_no == 8)
 			continue;
 
 		if (ec->ops && ec->ops->irqpending)
@@ -598,83 +580,6 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
 		ecard_check_lockup(desc);
 }
 
-#ifdef HAS_EXPMASK
-static unsigned char priority_masks[] =
-{
-	0xf0, 0xf1, 0xf3, 0xf7, 0xff, 0xff, 0xff, 0xff
-};
-
-static unsigned char first_set[] =
-{
-	0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00,
-	0x03, 0x00, 0x01, 0x00, 0x02, 0x00, 0x01, 0x00
-};
-
-static void
-ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
-{
-	const unsigned int statusmask = 15;
-	unsigned int status;
-
-	status = __raw_readb(EXPMASK_STATUS) & statusmask;
-	if (status) {
-		unsigned int slot = first_set[status];
-		ecard_t *ec = slot_to_ecard(slot);
-
-		if (ec->claimed) {
-			/*
-			 * this ugly code is so that we can operate a
-			 * prioritorising system:
-			 *
-			 * Card 0 	highest priority
-			 * Card 1
-			 * Card 2
-			 * Card 3	lowest priority
-			 *
-			 * Serial cards should go in 0/1, ethernet/scsi in 2/3
-			 * otherwise you will lose serial data at high speeds!
-			 */
-			generic_handle_irq(ec->irq);
-		} else {
-			printk(KERN_WARNING "card%d: interrupt from unclaimed "
-			       "card???\n", slot);
-			have_expmask &= ~(1 << slot);
-			__raw_writeb(have_expmask, EXPMASK_ENABLE);
-		}
-	} else
-		printk(KERN_WARNING "Wild interrupt from backplane (masks)\n");
-}
-
-static int __init ecard_probeirqhw(void)
-{
-	ecard_t *ec;
-	int found;
-
-	__raw_writeb(0x00, EXPMASK_ENABLE);
-	__raw_writeb(0xff, EXPMASK_STATUS);
-	found = (__raw_readb(EXPMASK_STATUS) & 15) == 0;
-	__raw_writeb(0xff, EXPMASK_ENABLE);
-
-	if (found) {
-		printk(KERN_DEBUG "Expansion card interrupt "
-		       "management hardware found\n");
-
-		/* for each card present, set a bit to '1' */
-		have_expmask = 0x80000000;
-
-		for (ec = cards; ec; ec = ec->next)
-			have_expmask |= 1 << ec->slot_no;
-
-		__raw_writeb(have_expmask, EXPMASK_ENABLE);
-	}
-
-	return found;
-}
-#else
-#define ecard_irqexp_handler NULL
-#define ecard_probeirqhw() (0)
-#endif
-
 static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
 {
 	void __iomem *address = NULL;
@@ -806,8 +711,8 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 
 	ec->slot_no = slot;
 	ec->easi = type == ECARD_EASI;
-	ec->irq = NO_IRQ;
-	ec->fiq = NO_IRQ;
+	ec->irq = 0;
+	ec->fiq = 0;
 	ec->dma = NO_DMA;
 	ec->ops = &ecard_default_ops;
 
@@ -978,8 +883,7 @@ EXPORT_SYMBOL(ecardm_iomap);
  * If bit 1 of the first byte of the card is set, then the
  * card does not exist.
  */
-static int __init
-ecard_probe(int slot, card_type_t type)
+static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 {
 	ecard_t **ecp;
 	ecard_t *ec;
@@ -1033,18 +937,18 @@ ecard_probe(int slot, card_type_t type)
 			break;
 		}
 
+	ec->irq = irq;
+
 	/*
 	 * hook the interrupt handlers
 	 */
 	if (slot < 8) {
-		ec->irq = 32 + slot;
 		irq_set_chip_and_handler(ec->irq, &ecard_chip,
 					 handle_level_irq);
+		irq_set_chip_data(ec->irq, ec);
 		set_irq_flags(ec->irq, IRQF_VALID);
 	}
 
-	if (slot == 8)
-		ec->irq = 11;
 #ifdef CONFIG_ARCH_RPC
 	/* On RiscPC, only first two slots have DMA capability */
 	if (slot < 2)
@@ -1074,28 +978,30 @@ ecard_probe(int slot, card_type_t type)
 static int __init ecard_init(void)
 {
 	struct task_struct *task;
-	int slot, irqhw;
+	int slot, irqbase;
+
+	irqbase = irq_alloc_descs(-1, 0, 8, -1);
+	if (irqbase < 0)
+		return irqbase;
 
 	task = kthread_run(ecard_task, NULL, "kecardd");
 	if (IS_ERR(task)) {
 		printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
 		       PTR_ERR(task));
+		irq_free_descs(irqbase, 8);
 		return PTR_ERR(task);
 	}
 
 	printk("Probing expansion cards\n");
 
 	for (slot = 0; slot < 8; slot ++) {
-		if (ecard_probe(slot, ECARD_EASI) == -ENODEV)
-			ecard_probe(slot, ECARD_IOC);
+		if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
+			ecard_probe(slot, irqbase + slot, ECARD_IOC);
 	}
 
-	ecard_probe(8, ECARD_IOC);
-
-	irqhw = ecard_probeirqhw();
+	ecard_probe(8, 11, ECARD_IOC);
 
-	irq_set_chained_handler(IRQ_EXPANSIONCARD,
-				irqhw ? ecard_irqexp_handler : ecard_irq_handler);
+	irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
 
 	ecard_proc_init();
 
diff --git a/arch/arm/kernel/ecard.h b/arch/arm/mach-rpc/ecard.h
index 4642d436be2a..4642d436be2a 100644
--- a/arch/arm/kernel/ecard.h
+++ b/arch/arm/mach-rpc/ecard.h
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
index 3d2037496e38..6868e178274d 100644
--- a/arch/arm/mach-rpc/include/mach/irqs.h
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -42,6 +42,4 @@
  */
 #define FIQ_START		64
 
-#define IRQ_TIMER		IRQ_TIMER0
-
 #define NR_IRQS			128
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 3d44a59fc0df..731552d68adf 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -98,15 +98,9 @@ static void __init rpc_map_io(void)
 }
 
 static struct resource acornfb_resources[] = {
-	{	/* VIDC */
-		.start		= 0x03400000,
-		.end		= 0x035fffff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_VSYNCPULSE,
-		.end		= IRQ_VSYNCPULSE,
-		.flags		= IORESOURCE_IRQ,
-	},
+	/* VIDC */
+	DEFINE_RES_MEM(0x03400000, 0x00200000),
+	DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
 };
 
 static struct platform_device acornfb_device = {
@@ -120,11 +114,7 @@ static struct platform_device acornfb_device = {
 };
 
 static struct resource iomd_resources[] = {
-	{
-		.start		= 0x03200000,
-		.end		= 0x0320ffff,
-		.flags		= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0x03200000, 0x10000),
 };
 
 static struct platform_device iomd_device = {
@@ -134,18 +124,25 @@ static struct platform_device iomd_device = {
 	.resource		= iomd_resources,
 };
 
+static struct resource iomd_kart_resources[] = {
+	DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
+	DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
+};
+
 static struct platform_device kbd_device = {
 	.name			= "kart",
 	.id			= -1,
 	.dev			= {
 		.parent 	= &iomd_device.dev,
 	},
+	.num_resources		= ARRAY_SIZE(iomd_kart_resources),
+	.resource		= iomd_kart_resources,
 };
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= 0x03010fe0,
-		.irq		= 10,
+		.irq		= IRQ_SERIALPORT,
 		.uartclk	= 1843200,
 		.regshift	= 2,
 		.iotype		= UPIO_MEM,
@@ -167,21 +164,9 @@ static struct pata_platform_info pata_platform_data = {
 };
 
 static struct resource pata_resources[] = {
-	[0] = {
-		.start		= 0x030107c0,
-		.end		= 0x030107df,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0x03010fd8,
-		.end		= 0x03010fdb,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start		= IRQ_HARDDISK,
-		.end		= IRQ_HARDDISK,
-		.flags		= IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(0x030107c0, 0x20),
+	DEFINE_RES_MEM(0x03010fd8, 0x04),
+	DEFINE_RES_IRQ(IRQ_HARDDISK),
 };
 
 static struct platform_device pata_device = {
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/mach-rpc/time.c
index deeed561b168..581fca934bb3 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/mach-rpc/time.c
@@ -85,7 +85,7 @@ static struct irqaction ioc_timer_irq = {
 static void __init ioc_timer_init(void)
 {
 	ioctime_init();
-	setup_irq(IRQ_TIMER, &ioc_timer_irq);
+	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
 
 struct sys_timer ioc_timer = {
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index ed7408d3216c..60b97ec01676 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76ab4d8e..375d3f779a88 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -15,14 +15,16 @@
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable-hwdef.h>
@@ -36,17 +38,18 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/assabet.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
 #define ASSABET_BCR_DB1110 \
-	(ASSABET_BCR_SPK_OFF    | ASSABET_BCR_QMUTE     | \
+	(ASSABET_BCR_SPK_OFF    | \
 	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
 	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
 	 ASSABET_BCR_IRDA_MD0)
 
 #define ASSABET_BCR_DB1111 \
-	(ASSABET_BCR_SPK_OFF    | ASSABET_BCR_QMUTE     | \
+	(ASSABET_BCR_SPK_OFF    | \
 	 ASSABET_BCR_LED_GREEN  | ASSABET_BCR_LED_RED   | \
 	 ASSABET_BCR_RS232EN    | ASSABET_BCR_LCD_12RGB | \
 	 ASSABET_BCR_CF_BUS_OFF | ASSABET_BCR_STEREO_LB | \
@@ -69,31 +72,10 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
-static void assabet_backlight_power(int on)
-{
-#ifndef ASSABET_PAL_VIDEO
-	if (on)
-		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
-	else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
-}
-
-/*
- * Turn on/off the backlight.  When turning the backlight on,
- * we wait 500us after turning it on so we don't cause the
- * supplies to droop when we enable the LCD controller (and
- * cause a hard reset.)
- */
-static void assabet_lcd_power(int on)
+static void assabet_ucb1x00_reset(enum ucb1x00_reset state)
 {
-#ifndef ASSABET_PAL_VIDEO
-	if (on) {
-		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
-		udelay(500);
-	} else
-#endif
-		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+	if (state == UCB_RST_PROBE)
+		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 }
 
 
@@ -152,15 +134,8 @@ static struct flash_platform_data assabet_flash_data = {
 };
 
 static struct resource assabet_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= SA1100_CS1_PHYS,
-		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
 };
 
 
@@ -199,18 +174,126 @@ static struct irda_platform_data assabet_irda_data = {
 	.set_speed	= assabet_irda_set_speed,
 };
 
+static struct ucb1x00_plat_data assabet_ucb1x00_data = {
+	.reset		= assabet_ucb1x00_reset,
+	.gpio_base	= -1,
+};
+
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
+	.codec_pdata	= &assabet_ucb1x00_data,
+};
+
+static void assabet_lcd_set_visual(u32 visual)
+{
+	u_int is_true_color = visual == FB_VISUAL_TRUECOLOR;
+
+	if (machine_is_assabet()) {
+#if 1		// phase 4 or newer Assabet's
+		if (is_true_color)
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+#else
+		// older Assabet's
+		if (is_true_color)
+			ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
+		else
+			ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
+#endif
+	}
+}
+
+#ifndef ASSABET_PAL_VIDEO
+static void assabet_lcd_backlight_power(int on)
+{
+	if (on)
+		ASSABET_BCR_set(ASSABET_BCR_LIGHT_ON);
+	else
+		ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+/*
+ * Turn on/off the backlight.  When turning the backlight on, we wait
+ * 500us after turning it on so we don't cause the supplies to droop
+ * when we enable the LCD controller (and cause a hard reset.)
+ */
+static void assabet_lcd_power(int on)
+{
+	if (on) {
+		ASSABET_BCR_set(ASSABET_BCR_LCD_ON);
+		udelay(500);
+	} else
+		ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 61,		.upper_margin	= 3,
+	.right_margin	= 9,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.backlight_power = assabet_lcd_backlight_power,
+	.lcd_power = assabet_lcd_power,
+	.set_visual = assabet_lcd_set_visual,
+};
+#else
+static void assabet_pal_backlight_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LIGHT_ON);
+}
+
+static void assabet_pal_power(int on)
+{
+	ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
+}
+
+static struct sa1100fb_mach_info pal_info = {
+	.pixclock	= 67797,	.bpp		= 16,
+	.xres		= 640,		.yres		= 512,
+
+	.hsync_len	= 64,		.vsync_len	= 6,
+	.left_margin	= 125,		.upper_margin	= 70,
+	.right_margin	= 115,		.lower_margin	= 36,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+
+	.backlight_power = assabet_pal_backlight_power,
+	.lcd_power = assabet_pal_power,
+	.set_visual = assabet_lcd_set_visual,
 };
+#endif
+
+#ifdef CONFIG_ASSABET_NEPONSET
+static struct resource neponset_resources[] = {
+	DEFINE_RES_MEM(0x10000000, 0x08000000),
+	DEFINE_RES_MEM(0x18000000, 0x04000000),
+	DEFINE_RES_MEM(0x40000000, SZ_8K),
+	DEFINE_RES_IRQ(IRQ_GPIO25),
+};
+#endif
 
 static void __init assabet_init(void)
 {
 	/*
 	 * Ensure that the power supply is in "high power" mode.
 	 */
-	GPDR |= GPIO_GPIO16;
 	GPSR = GPIO_GPIO16;
+	GPDR |= GPIO_GPIO16;
 
 	/*
 	 * Ensure that these pins are set as outputs and are driving
@@ -218,8 +301,16 @@ static void __init assabet_init(void)
 	 * the WS latch in the CPLD, and we don't float causing
 	 * excessive power drain.  --rmk
 	 */
-	GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
 	GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+	GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
+
+	/*
+	 * Also set GPIO27 as an output; this is used to clock UART3
+	 * via the FPGA and as otherwise has no pullups or pulldowns,
+	 * so stop it floating.
+	 */
+	GPCR = GPIO_GPIO27;
+	GPDR |= GPIO_GPIO27;
 
 	/*
 	 * Set up registers for sleep mode.
@@ -231,8 +322,7 @@ static void __init assabet_init(void)
 	PPDR |= PPC_TXD3 | PPC_TXD1;
 	PPSR |= PPC_TXD3 | PPC_TXD1;
 
-	sa1100fb_lcd_power = assabet_lcd_power;
-	sa1100fb_backlight_power = assabet_backlight_power;
+	sa11x0_ppc_configure_mcp();
 
 	if (machine_has_neponset()) {
 		/*
@@ -246,9 +336,17 @@ static void __init assabet_init(void)
 #ifndef CONFIG_ASSABET_NEPONSET
 		printk( "Warning: Neponset detected but full support "
 			"hasn't been configured in the kernel\n" );
+#else
+		platform_device_register_simple("neponset", 0,
+			neponset_resources, ARRAY_SIZE(neponset_resources));
 #endif
 	}
 
+#ifndef ASSABET_PAL_VIDEO
+	sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+	sa11x0_register_lcd(&pal_video);
+#endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
@@ -412,21 +510,8 @@ static void __init assabet_map_io(void)
 	 */
 	Ser1SDCR0 |= SDCR0_SUS;
 
-	if (machine_has_neponset()) {
-#ifdef CONFIG_ASSABET_NEPONSET
-		extern void neponset_map_io(void);
-
-		/*
-		 * We map Neponset registers even if it isn't present since
-		 * many drivers will try to probe their stuff (and fail).
-		 * This is still more friendly than a kernel paging request
-		 * crash.
-		 */
-		neponset_map_io();
-#endif
-	} else {
+	if (!machine_has_neponset())
 		sa1100_register_uart_fns(&assabet_port_fns);
-	}
 
 	/*
 	 * When Neponset is attached, the first UART should be
@@ -449,6 +534,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= assabet_init,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b07a2c024cb7..e0f0c030258c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -39,20 +39,27 @@
 #include "generic.h"
 
 static struct resource sa1111_resources[] = {
-	[0] = {
-		.start		= BADGE4_SA1111_BASE,
-		.end		= BADGE4_SA1111_BASE + 0x00001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= BADGE4_IRQ_GPIO_SA1111,
-		.end		= BADGE4_IRQ_GPIO_SA1111,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
+	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
 };
 
+static int badge4_sa1111_enable(void *data, unsigned devid)
+{
+	if (devid == SA1111_DEVID_USB)
+		badge4_set_5V(BADGE4_5V_USB, 1);
+	return 0;
+}
+
+static void badge4_sa1111_disable(void *data, unsigned devid)
+{
+	if (devid == SA1111_DEVID_USB)
+		badge4_set_5V(BADGE4_5V_USB, 0);
+}
+
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
+	.enable		= badge4_sa1111_enable,
+	.disable	= badge4_sa1111_disable,
 };
 
 static u64 sa1111_dmamask = 0xffffffffUL;
@@ -121,11 +128,8 @@ static struct flash_platform_data badge4_flash_data = {
 	.nr_parts	= ARRAY_SIZE(badge4_partitions),
 };
 
-static struct resource badge4_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource badge4_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
 
 static int five_v_on __initdata = 0;
 
@@ -269,11 +273,6 @@ static struct map_desc badge4_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(0x10000000),
 		.length		= 0x00100000,
 		.type		= MT_DEVICE
-	}, {	/* SA-1111      */
-		.virtual	= 0xf4000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -304,6 +303,7 @@ static void __init badge4_map_io(void)
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
 	.atag_offset	= 0x100,
 	.map_io		= badge4_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 11bb6d0b9be3..4a61f60e0502 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -18,7 +18,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -30,14 +29,11 @@
 
 #include <mach/cerf.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
-	[0] = {
-		.start	= 0x80030000,
-		.end	= 0x8003ffff,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
 };
 
 static struct platform_device cerfuart2_device = {
@@ -87,11 +83,8 @@ static struct flash_platform_data cerf_flash_data = {
 	.nr_parts	= ARRAY_SIZE(cerf_partitions),
 };
 
-static struct resource cerf_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource cerf_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init cerf_init_irq(void)
 {
@@ -128,6 +121,7 @@ static struct mcp_plat_data cerf_mcp_data = {
 
 static void __init cerf_init(void)
 {
+	sa11x0_ppc_configure_mcp();
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
 	sa11x0_register_mcp(&cerf_mcp_data);
@@ -136,6 +130,7 @@ static void __init cerf_init(void)
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	/* Maintainer: support@intrinsyc.com */
 	.map_io		= cerf_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= cerf_init,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd5652118ed1..48885b7efd6b 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -22,15 +22,17 @@
 #include <linux/tty.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <mach/collie.h>
@@ -44,15 +46,12 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
 static struct resource collie_scoop_resources[] = {
-	[0] = {
-		.start		= 0x40800000,
-		.end		= 0x40800fff,
-		.flags		= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
 };
 
 static struct scoop_config collie_scoop_setup = {
@@ -85,10 +84,14 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+	.codec_pdata	= &collie_ucb1x00_data,
 };
 
 /*
@@ -221,16 +224,8 @@ device_initcall(collie_uart_init);
 
 
 static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x40000000,
-		.end		= 0x40001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_GPIO25,
-		.end		= IRQ_GPIO25,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO25),
 };
 
 static struct locomo_platform_data locomo_info = {
@@ -303,11 +298,21 @@ static struct flash_platform_data collie_flash_data = {
 };
 
 static struct resource collie_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+};
+
+static struct sa1100fb_mach_info collie_lcd_info = {
+	.pixclock	= 171521,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 5,		.vsync_len	= 1,
+	.left_margin	= 11,		.upper_margin	= 2,
+	.right_margin	= 30,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 };
 
 static void __init collie_init(void)
@@ -341,6 +346,10 @@ static void __init collie_init(void)
 
 	collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN);
 	collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN);
+
+	sa11x0_ppc_configure_mcp();
+
+
 	platform_scoop_config = &collie_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -348,6 +357,7 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
+	sa11x0_register_lcd(&collie_lcd_info);
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
@@ -383,6 +393,7 @@ static void __init collie_map_io(void)
 
 MACHINE_START(COLLIE, "Sharp-Collie")
 	.map_io		= collie_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= collie_init,
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
deleted file mode 100644
index ad660350c296..000000000000
--- a/arch/arm/mach-sa1100/dma.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * arch/arm/mach-sa1100/dma.c
- *
- * Support functions for the SA11x0 internal DMA channels.
- *
- * Copyright (C) 2000, 2001 by Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DPRINTK( s, arg... )  printk( "dma<%p>: " s, regs , ##arg )
-#else
-#define DPRINTK( x... )
-#endif
-
-
-typedef struct {
-	const char *device_id;		/* device name */
-	u_long device;			/* this channel device, 0  if unused*/
-	dma_callback_t callback;	/* to call when DMA completes */
-	void *data;			/* ... with private data ptr */
-} sa1100_dma_t;
-
-static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
-
-static DEFINE_SPINLOCK(dma_list_lock);
-
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	dma_regs_t *dma_regs = dev_id;
-	sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7);
-	int status = dma_regs->RdDCSR;
-
-	if (status & (DCSR_ERROR)) {
-		printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id);
-		dma_regs->ClrDCSR = DCSR_ERROR;
-	}
-
-	dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB);
-	if (dma->callback) {
-		if (status & DCSR_DONEA)
-			dma->callback(dma->data);
-		if (status & DCSR_DONEB)
-			dma->callback(dma->data);
-	}
-	return IRQ_HANDLED;
-}
-
-
-/**
- *	sa1100_request_dma - allocate one of the SA11x0's DMA channels
- *	@device: The SA11x0 peripheral targeted by this request
- *	@device_id: An ascii name for the claiming device
- *	@callback: Function to be called when the DMA completes
- *	@data: A cookie passed back to the callback function
- *	@dma_regs: Pointer to the location of the allocated channel's identifier
- *
- * 	This function will search for a free DMA channel and returns the
- * 	address of the hardware registers for that channel as the channel
- * 	identifier. This identifier is written to the location pointed by
- * 	@dma_regs. The list of possible values for @device are listed into
- * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
- *
- * 	Note that reading from a port and writing to the same port are
- * 	actually considered as two different streams requiring separate
- * 	DMA registrations.
- *
- * 	The @callback function is called from interrupt context when one
- * 	of the two possible DMA buffers in flight has terminated. That
- * 	function has to be small and efficient while posponing more complex
- * 	processing to a lower priority execution context.
- *
- * 	If no channels are available, or if the desired @device is already in
- * 	use by another DMA channel, then an error code is returned.  This
- * 	function must be called before any other DMA calls.
- **/
-
-int sa1100_request_dma (dma_device_t device, const char *device_id,
-			dma_callback_t callback, void *data,
-			dma_regs_t **dma_regs)
-{
-	sa1100_dma_t *dma = NULL;
-	dma_regs_t *regs;
-	int i, err;
-
-	*dma_regs = NULL;
-
-	err = 0;
-	spin_lock(&dma_list_lock);
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++) {
-		if (dma_chan[i].device == device) {
-			err = -EBUSY;
-			break;
-		} else if (!dma_chan[i].device && !dma) {
-			dma = &dma_chan[i];
-		}
-	}
-	if (!err) {
-		if (dma)
-			dma->device = device;
-		else
-			err = -ENOSR;
-	}
-	spin_unlock(&dma_list_lock);
-	if (err)
-		return err;
-
-	i = dma - dma_chan;
-	regs = (dma_regs_t *)&DDAR(i);
-	err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED,
-			  device_id, regs);
-	if (err) {
-		printk(KERN_ERR
-		       "%s: unable to request IRQ %d for %s\n",
-		       __func__, IRQ_DMA0 + i, device_id);
-		dma->device = 0;
-		return err;
-	}
-
-	*dma_regs = regs;
-	dma->device_id = device_id;
-	dma->callback = callback;
-	dma->data = data;
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	regs->DDAR = device;
-
-	return 0;
-}
-
-
-/**
- * 	sa1100_free_dma - free a SA11x0 DMA channel
- * 	@regs: identifier for the channel to free
- *
- * 	This clears all activities on a given DMA channel and releases it
- * 	for future requests.  The @regs identifier is provided by a
- * 	successful call to sa1100_request_dma().
- **/
-
-void sa1100_free_dma(dma_regs_t *regs)
-{
-	int i;
-
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++)
-		if (regs == (dma_regs_t *)&DDAR(i))
-			break;
-	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	if (!dma_chan[i].device) {
-		printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
-		return;
-	}
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	free_irq(IRQ_DMA0 + i, regs);
-	dma_chan[i].device = 0;
-}
-
-
-/**
- * 	sa1100_start_dma - submit a data buffer for DMA
- * 	@regs: identifier for the channel to use
- * 	@dma_ptr: buffer physical (or bus) start address
- * 	@size: buffer size
- *
- * 	This function hands the given data buffer to the hardware for DMA
- * 	access. If another buffer is already in flight then this buffer
- * 	will be queued so the DMA engine will switch to it automatically
- * 	when the previous one is done.  The DMA engine is actually toggling
- * 	between two buffers so at most 2 successful calls can be made before
- * 	one of them terminates and the callback function is called.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- *
- * 	The @size must not be larger than %MAX_DMA_SIZE.  If a given buffer
- * 	is larger than that then it's the caller's responsibility to split
- * 	it into smaller chunks and submit them separately. If this is the
- * 	case then a @size of %CUT_DMA_SIZE is recommended to avoid ending
- * 	up with too small chunks. The callback function can be used to chain
- * 	submissions of buffer chunks.
- *
- * 	Error return values:
- * 	%-EOVERFLOW:	Given buffer size is too big.
- * 	%-EBUSY:	Both DMA buffers are already in use.
- * 	%-EAGAIN:	Both buffers were busy but one of them just completed
- * 			but the interrupt handler has to execute first.
- *
- * 	This function returs 0 on success.
- **/
-
-int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size)
-{
-	unsigned long flags;
-	u_long status;
-	int ret;
-
-	if (dma_ptr & 3)
-		printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n",
-		       (unsigned long)dma_ptr);
-
-	if (size > MAX_DMA_SIZE)
-		return -EOVERFLOW;
-
-	local_irq_save(flags);
-	status = regs->RdDCSR;
-
-	/* If both DMA buffers are started, there's nothing else we can do. */
-	if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) {
-		DPRINTK("start: st %#x busy\n", status);
-		ret = -EBUSY;
-		goto out;
-	}
-
-	if (((status & DCSR_BIU) && (status & DCSR_STRTB)) ||
-	    (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) {
-		if (status & DCSR_DONEA) {
-			/* give a chance for the interrupt to be processed */
-			ret = -EAGAIN;
-			goto out;
-		}
-		regs->DBSA = dma_ptr;
-		regs->DBTA = size;
-		regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN;
-		DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size);
-	} else {
-		if (status & DCSR_DONEB) {
-			/* give a chance for the interrupt to be processed */
-			ret = -EAGAIN;
-			goto out;
-		}
-		regs->DBSB = dma_ptr;
-		regs->DBTB = size;
-		regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN;
-		DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size);
-	}
-	ret = 0;
-
-out:
-	local_irq_restore(flags);
-	return ret;
-}
-
-
-/**
- * 	sa1100_get_dma_pos - return current DMA position
- * 	@regs: identifier for the channel to use
- *
- * 	This function returns the current physical (or bus) address for the
- * 	given DMA channel.  If the channel is running i.e. not in a stopped
- * 	state then the caller must disable interrupts prior calling this
- * 	function and process the returned value before re-enabling them to
- * 	prevent races with the completion interrupt handler and the callback
- * 	function. The validation of the returned value is the caller's
- * 	responsibility as well -- the hardware seems to return out of range
- * 	values when the DMA engine completes a buffer.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs)
-{
-	int status;
-
-	/*
-	 * We must determine whether buffer A or B is active.
-	 * Two possibilities: either we are in the middle of
-	 * a buffer, or the DMA controller just switched to the
-	 * next toggle but the interrupt hasn't been serviced yet.
-	 * The former case is straight forward.  In the later case,
-	 * we'll do like if DMA is just at the end of the previous
-	 * toggle since all registers haven't been reset yet.
-	 * This goes around the edge case and since we're always
-	 * a little behind anyways it shouldn't make a big difference.
-	 * If DMA has been stopped prior calling this then the
-	 * position is exact.
-	 */
-	status = regs->RdDCSR;
-	if ((!(status & DCSR_BIU) &&  (status & DCSR_STRTA)) ||
-	    ( (status & DCSR_BIU) && !(status & DCSR_STRTB)))
-		return regs->DBSA;
-	else
-		return regs->DBSB;
-}
-
-
-/**
- * 	sa1100_reset_dma - reset a DMA channel
- * 	@regs: identifier for the channel to use
- *
- * 	This function resets and reconfigure the given DMA channel. This is
- * 	particularly useful after a sleep/wakeup event.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-void sa1100_reset_dma(dma_regs_t *regs)
-{
-	int i;
-
-	for (i = 0; i < SA1100_DMA_CHANNELS; i++)
-		if (regs == (dma_regs_t *)&DDAR(i))
-			break;
-	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
-		return;
-	}
-
-	regs->ClrDCSR =
-		(DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
-		 DCSR_IE | DCSR_ERROR | DCSR_RUN);
-	regs->DDAR = dma_chan[i].device;
-}
-
-
-EXPORT_SYMBOL(sa1100_request_dma);
-EXPORT_SYMBOL(sa1100_free_dma);
-EXPORT_SYMBOL(sa1100_start_dma);
-EXPORT_SYMBOL(sa1100_get_dma_pos);
-EXPORT_SYMBOL(sa1100_reset_dma);
-
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c1ebf4a7920..1d0f71b17a26 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -14,18 +14,23 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/div64.h>
-#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 unsigned int reset_status;
@@ -149,16 +154,8 @@ static void sa11x0_register_device(struct platform_device *dev, void *data)
 
 
 static struct resource sa11x0udc_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser0UDCCR),
-		.end	= __PREG(Ser0UDCCR) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser0UDC,
-		.end	= IRQ_Ser0UDC,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
 };
 
 static u64 sa11x0udc_dma_mask = 0xffffffffUL;
@@ -175,16 +172,8 @@ static struct platform_device sa11x0udc_device = {
 };
 
 static struct resource sa11x0uart1_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser1UTCR0),
-		.end	= __PREG(Ser1UTCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser1UART,
-		.end	= IRQ_Ser1UART,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
 };
 
 static struct platform_device sa11x0uart1_device = {
@@ -195,16 +184,8 @@ static struct platform_device sa11x0uart1_device = {
 };
 
 static struct resource sa11x0uart3_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser3UTCR0),
-		.end	= __PREG(Ser3UTCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser3UART,
-		.end	= IRQ_Ser3UART,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
 };
 
 static struct platform_device sa11x0uart3_device = {
@@ -215,16 +196,9 @@ static struct platform_device sa11x0uart3_device = {
 };
 
 static struct resource sa11x0mcp_resources[] = {
-	[0] = {
-		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser4MCP,
-		.end	= IRQ_Ser4MCP,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
+	[1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
+	[2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
 };
 
 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
@@ -240,22 +214,24 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
+void __init sa11x0_ppc_configure_mcp(void)
+{
+	/* Setup the PPC unit for the MCP */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+}
+
 void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
 	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
-	[0] = {
-		.start	= 0x80070000,
-		.end	= 0x8007ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_Ser4SSP,
-		.end	= IRQ_Ser4SSP,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
 };
 
 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
@@ -272,16 +248,8 @@ static struct platform_device sa11x0ssp_device = {
 };
 
 static struct resource sa11x0fb_resources[] = {
-	[0] = {
-		.start	= 0xb0100000,
-		.end	= 0xb010ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_LCD,
-		.end	= IRQ_LCD,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
+	[1] = DEFINE_RES_IRQ(IRQ_LCD),
 };
 
 static struct platform_device sa11x0fb_device = {
@@ -294,6 +262,11 @@ static struct platform_device sa11x0fb_device = {
 	.resource	= sa11x0fb_resources,
 };
 
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+	sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
 static struct platform_device sa11x0pcmcia_device = {
 	.name		= "sa11x0-pcmcia",
 	.id		= -1,
@@ -314,23 +287,10 @@ void sa11x0_register_mtd(struct flash_platform_data *flash,
 }
 
 static struct resource sa11x0ir_resources[] = {
-	{
-		.start	= __PREG(Ser2UTCR0),
-		.end	= __PREG(Ser2UTCR0) + 0x24 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= __PREG(Ser2HSCR0),
-		.end	= __PREG(Ser2HSCR0) + 0x1c - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= __PREG(Ser2HSCR2),
-		.end	= __PREG(Ser2HSCR2) + 0x04 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_Ser2ICP,
-		.end	= IRQ_Ser2ICP,
-		.flags	= IORESOURCE_IRQ,
-	}
+	DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
+	DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
+	DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
+	DEFINE_RES_IRQ(IRQ_Ser2ICP),
 };
 
 static struct platform_device sa11x0ir_device = {
@@ -358,14 +318,37 @@ static struct platform_device sa11x0rtc_device = {
 	.resource	= sa1100_rtc_resources,
 };
 
+static struct resource sa11x0dma_resources[] = {
+	DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
+	DEFINE_RES_IRQ(IRQ_DMA0),
+	DEFINE_RES_IRQ(IRQ_DMA1),
+	DEFINE_RES_IRQ(IRQ_DMA2),
+	DEFINE_RES_IRQ(IRQ_DMA3),
+	DEFINE_RES_IRQ(IRQ_DMA4),
+	DEFINE_RES_IRQ(IRQ_DMA5),
+};
+
+static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device sa11x0dma_device = {
+	.name		= "sa11x0-dma",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &sa11x0dma_dma_mask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(sa11x0dma_resources),
+	.resource	= sa11x0dma_resources,
+};
+
 static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
-	&sa11x0fb_device,
 	&sa11x0rtc_device,
+	&sa11x0dma_device,
 };
 
 static int __init sa1100_init(void)
@@ -376,12 +359,6 @@ static int __init sa1100_init(void)
 
 arch_initcall(sa1100_init);
 
-void (*sa1100fb_backlight_power)(int on);
-void (*sa1100fb_lcd_power)(int on);
-
-EXPORT_SYMBOL(sa1100fb_backlight_power);
-EXPORT_SYMBOL(sa1100fb_lcd_power);
-
 
 /*
  * Common I/O mapping:
@@ -436,7 +413,7 @@ void __init sa1100_map_io(void)
  * the MBGNT signal false to ensure the SA1111 doesn't own the
  * SDRAM bus.
  */
-void __init sa1110_mb_disable(void)
+void sa1110_mb_disable(void)
 {
 	unsigned long flags;
 
@@ -455,7 +432,7 @@ void __init sa1110_mb_disable(void)
  * If the system is going to use the SA-1111 DMA engines, set up
  * the memory bus request/grant pins.
  */
-void __devinit sa1110_mb_enable(void)
+void sa1110_mb_enable(void)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be36..9eb3b3cd5a63 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -16,9 +16,6 @@ extern void sa11x0_restart(char, const char *);
 	mi->bank[__nr].start = (__start), \
 	mi->bank[__nr].size = (__size)
 
-extern void (*sa1100fb_backlight_power)(int on);
-extern void (*sa1100fb_lcd_power)(int on);
-
 extern void sa1110_mb_enable(void);
 extern void sa1110_mb_disable(void);
 
@@ -39,4 +36,8 @@ struct irda_platform_data;
 void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
+void sa11x0_ppc_configure_mcp(void);
 void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba6..b2e8d0f418e0 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,11 +14,14 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -36,13 +39,28 @@ static void h3100_lcd_power(int enable)
 	}
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+	.pixclock	= 406977, 	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 26,		.vsync_len	= 41,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 4,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 1,
+	.cmap_inverse	= 1,
+
+	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.lcd_power = h3100_lcd_power,
+};
 
 static void __init h3100_map_io(void)
 {
 	h3xxx_map_io();
 
-	sa1100fb_lcd_power = h3100_lcd_power;
-
 	/* Older bootldrs put GPIO2-9 in alternate mode on the
 	   assumption that they are used for video */
 	GAFR &= ~0x000001fb;
@@ -80,12 +98,15 @@ static void __init h3100_mach_init(void)
 {
 	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3100_lcd_info);
 	sa11x0_register_irda(&h3100_irda_data);
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
 	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3100_mach_init,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ecf..cb6659f294fe 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,11 +14,14 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
 
 #include <mach/h3xxx.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -56,11 +59,35 @@ err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
 err1:	return;
 }
 
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+	.red	= { .offset = 12, .length = 4, },
+	.green	= { .offset = 7,  .length = 4, },
+	.blue	= { .offset = 1,  .length = 4, },
+	.transp	= { .offset = 0,  .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+	.pixclock	= 174757, 	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 3,		.vsync_len	= 3,
+	.left_margin	= 12,		.upper_margin	= 10,
+	.right_margin	= 17,		.lower_margin	= 1,
+
+	.cmap_static	= 1,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+	.rgb[RGB_16] = &h3600_rgb_16,
+
+	.lcd_power = h3600_lcd_power,
+};
+
+
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
-
-	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
 /*
@@ -121,12 +148,15 @@ static void __init h3600_mach_init(void)
 {
 	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
 	h3xxx_mach_init();
+
+	sa11x0_register_lcd(&h3600_lcd_info);
 	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.atag_offset	= 0x100,
 	.map_io		= h3600_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= h3600_mach_init,
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index b0784c974c2d..63150e1ffe9e 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -109,11 +109,8 @@ static struct flash_platform_data h3xxx_flash_data = {
 	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
 };
 
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource h3xxx_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 
 /*
@@ -186,11 +183,7 @@ static struct sa1100_port_fns h3xxx_port_fns __initdata = {
  */
 
 static struct resource egpio_resources[] = {
-	[0] = {
-		.start	= H3600_EGPIO_PHYS,
-		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4),
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index c01bb36db940..5535475bf583 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,12 +22,10 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -35,6 +33,9 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /**********************************************************************
@@ -179,11 +180,8 @@ static struct flash_platform_data hackkit_flash_data = {
 	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
 };
 
-static struct resource hackkit_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource hackkit_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init hackkit_init(void)
 {
@@ -197,6 +195,7 @@ static void __init hackkit_init(void)
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
 	.atag_offset	= 0x100,
 	.map_io		= hackkit_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= hackkit_init,
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index bae8296f5dbf..3f2d1b60188c 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1590,224 +1590,9 @@
 
 /*
  * Direct Memory Access (DMA) control registers
- *
- * Registers
- *    DDAR0     	Direct Memory Access (DMA) Device Address Register
- *              	channel 0 (read/write).
- *    DCSR0     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 0 (read/write).
- *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 0 (read/write).
- *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 0 (read/write).
- *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 0 (read/write).
- *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 0 (read/write).
- *
- *    DDAR1     	Direct Memory Access (DMA) Device Address Register
- *              	channel 1 (read/write).
- *    DCSR1     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 1 (read/write).
- *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 1 (read/write).
- *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 1 (read/write).
- *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 1 (read/write).
- *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 1 (read/write).
- *
- *    DDAR2     	Direct Memory Access (DMA) Device Address Register
- *              	channel 2 (read/write).
- *    DCSR2     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 2 (read/write).
- *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 2 (read/write).
- *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 2 (read/write).
- *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 2 (read/write).
- *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 2 (read/write).
- *
- *    DDAR3     	Direct Memory Access (DMA) Device Address Register
- *              	channel 3 (read/write).
- *    DCSR3     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 3 (read/write).
- *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 3 (read/write).
- *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 3 (read/write).
- *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 3 (read/write).
- *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 3 (read/write).
- *
- *    DDAR4     	Direct Memory Access (DMA) Device Address Register
- *              	channel 4 (read/write).
- *    DCSR4     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 4 (read/write).
- *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 4 (read/write).
- *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 4 (read/write).
- *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 4 (read/write).
- *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 4 (read/write).
- *
- *    DDAR5     	Direct Memory Access (DMA) Device Address Register
- *              	channel 5 (read/write).
- *    DCSR5     	Direct Memory Access (DMA) Control and Status
- *              	Register channel 5 (read/write).
- *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
- *              	register A channel 5 (read/write).
- *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register A channel 5 (read/write).
- *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
- *              	register B channel 5 (read/write).
- *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
- *              	register B channel 5 (read/write).
  */
-
-#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
-
-#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
-#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
-#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
-#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
-#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
-#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
-#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
-#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
-
-#define DDAR_RW 	0x00000001	/* device data Read/Write          */
-#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
-                	        	/*  (memory -> device)             */
-#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
-                	        	/*  (device -> memory)             */
-#define DDAR_E  	0x00000002	/* big/little Endian device        */
-#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
-#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
-#define DDAR_BS 	0x00000004	/* device Burst Size               */
-#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
-#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
-#define DDAR_DW 	0x00000008	/* device Data Width               */
-#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
-#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
-#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
-#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
-                	(0x0 << FShft (DDAR_DS))
-#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
-                	(0x1 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
-                	(0x2 << FShft (DDAR_DS))
-#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
-                	(0x3 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
-                	(0x4 << FShft (DDAR_DS))
-#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
-                	(0x5 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
-                	(0x6 << FShft (DDAR_DS))
-#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
-                	(0x7 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
-                	(0x8 << FShft (DDAR_DS))
-#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
-                	(0x9 << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
-                	        	/*  (audio)                        */ \
-                	(0xA << FShft (DDAR_DS))
-#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
-                	        	/*  (audio)                        */ \
-                	(0xB << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
-                	        	/*  (telecom)                      */ \
-                	(0xC << FShft (DDAR_DS))
-#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
-                	        	/*  (telecom)                      */ \
-                	(0xD << FShft (DDAR_DS))
-#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
-                	(0xE << FShft (DDAR_DS))
-#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
-                	(0xF << FShft (DDAR_DS))
-#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
-#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
-                	(((Add) & 0xF0000000) | \
-                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
-#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
-#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
-#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
-#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
-#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
-                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
-                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
-                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
-#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
-                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
-#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
-#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
-                	        	/* (telecom)                       */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
-#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
-                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
-#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
-                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
-                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
-
-#define DCSR_RUN	0x00000001	/* DMA running                     */
-#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
-#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
-#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
-#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
-#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
-#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
-#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
-#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
-#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
-
-#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
-#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
-#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
+#define DMA_SIZE	(6 * 0x20)
+#define DMA_PHYS	0xb0000000
 
 
 /*
@@ -1903,16 +1688,6 @@
 #define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
                 	        	/* (Alternative)                   */
 
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
 #define LCCR0_LEN	0x00000001	/* LCD ENable                      */
 #define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
deleted file mode 100644
index dda1b351310d..000000000000
--- a/arch/arm/mach-sa1100/include/mach/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/dma.h
- *
- * Generic SA1100 DMA support
- *
- * Copyright (C) 2000 Nicolas Pitre
- *
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "hardware.h"
-
-
-/*
- * The SA1100 has six internal DMA channels.
- */
-#define SA1100_DMA_CHANNELS	6
-
-/*
- * Maximum physical DMA buffer size
- */
-#define MAX_DMA_SIZE		0x1fff
-#define CUT_DMA_SIZE		0x1000
-
-/*
- * All possible SA1100 devices a DMA channel can be attached to.
- */
-typedef enum {
-	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
-	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
-	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
-	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
-	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
-	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
-	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
-	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
-	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
-	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
-	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
-	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
-	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
-	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
-	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
-	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
-	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
-	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
-} dma_device_t;
-
-typedef struct {
-	volatile u_long DDAR;
-	volatile u_long SetDCSR;
-	volatile u_long ClrDCSR;
-	volatile u_long RdDCSR;
-	volatile dma_addr_t DBSA;
-	volatile u_long DBTA;
-	volatile dma_addr_t DBSB;
-	volatile u_long DBTB;
-} dma_regs_t;
-
-typedef void (*dma_callback_t)(void *data);
-
-/*
- * DMA function prototypes
- */
-
-extern int sa1100_request_dma( dma_device_t device, const char *device_id,
-			       dma_callback_t callback, void *data,
-			       dma_regs_t **regs );
-extern void sa1100_free_dma( dma_regs_t *regs );
-extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
-extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
-extern void sa1100_reset_dma(dma_regs_t *regs);
-
-/**
- * 	sa1100_stop_dma - stop DMA in progress
- * 	@regs: identifier for the channel to use
- *
- * 	This stops DMA without clearing buffer pointers. Unlike
- * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
- * 	or sa1100_get_dma_pos().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_resume_dma - resume DMA on a stopped channel
- * 	@regs: identifier for the channel to use
- *
- * 	This resumes DMA on a channel previously stopped with
- * 	sa1100_stop_dma().
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
-
-/**
- * 	sa1100_clear_dma - clear DMA pointers
- * 	@regs: identifier for the channel to use
- *
- * 	This clear any DMA state so the DMA engine is ready to restart
- * 	with new buffers through sa1100_start_dma(). Any buffers in flight
- * 	are discarded.
- *
- * 	The @regs identifier is provided by a successful call to
- * 	sa1100_request_dma().
- **/
-
-#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index d18f21abef80..3790298b7142 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -71,22 +71,19 @@
 /*
  * Figure out the MAX IRQ number.
  *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
- * Otherwise, we have the standard IRQs only.
+ * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
+ * allocate their IRQs above NR_IRQS.
+ *
+ * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
+ * to be included in the NR_IRQS calculation.
  */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS			(IRQ_BOARD_START + 4)
+#ifdef CONFIG_SHARP_LOCOMO
+#define NR_IRQS_LOCOMO		4
 #else
-#define NR_IRQS			(IRQ_BOARD_START)
+#define NR_IRQS_LOCOMO		0
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
-#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
-#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+#ifndef NR_IRQS
+#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#endif
+#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index ed1a331508a7..4b2860ae3828 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,7 +16,7 @@ struct mcp_plat_data {
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
-	int gpio_base;
+	void *codec_pdata;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index ffe2bc45eed0..5516a52a329d 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -15,54 +15,6 @@
 /*
  * Neponset definitions: 
  */
-
-#define NEPONSET_CPLD_BASE      (0x10000000)
-#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
-#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
-
-#define _IRR                    0x10000024      /* Interrupt Reason Register */
-#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
-#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
-#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
-#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
-#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
-#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
-#define _SWPK                   0x10000020      /* Switch pack (RO)          */
-#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
-
-#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
-
-#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
-#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
-#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
-#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
-#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
-#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
-#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
-#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
-#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
-
-#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
-
-#define IRR_ETHERNET		(1<<0)
-#define IRR_USAR		(1<<1)
-#define IRR_SA1111		(1<<2)
-
-#define AUD_SEL_1341            (1<<0)
-#define AUD_MUTE_1341           (1<<1)
-
-#define MDM_CTL0_RTS1		(1 << 0)
-#define MDM_CTL0_DTR1		(1 << 1)
-#define MDM_CTL0_RTS2		(1 << 2)
-#define MDM_CTL0_DTR2		(1 << 3)
-
-#define MDM_CTL1_CTS1		(1 << 0)
-#define MDM_CTL1_DSR1		(1 << 1)
-#define MDM_CTL1_DCD1		(1 << 2)
-#define MDM_CTL1_CTS2		(1 << 3)
-#define MDM_CTL1_DSR2		(1 << 4)
-#define MDM_CTL1_DCD2		(1 << 5)
-
 #define NCR_GP01_OFF		(1<<0)
 #define NCR_TP_PWR_EN		(1<<1)
 #define NCR_MS_PWR_EN		(1<<2)
@@ -71,4 +23,8 @@
 #define NCR_A0VPP		(1<<5)
 #define NCR_A1VPP		(1<<6)
 
+void neponset_ncr_frob(unsigned int, unsigned int);
+#define neponset_ncr_set(v)	neponset_ncr_frob(0, v)
+#define neponset_ncr_clear(v)	neponset_ncr_frob(v, 0)
+
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
index 019f857a7938..fff39e02b496 100644
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -21,7 +21,7 @@
 #define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
 #define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
 #define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+#define SHANNON_GPIO_DISP_EN		22		/* out */
 /* XXX GPIO 23 unaccounted for */
 #define SHANNON_GPIO_EJECT_0		24		/* in */
 #define SHANNON_GPIO_EJECT_1		25		/* in */
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index dfbf824a69fa..516ccc25d7fd 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -17,6 +17,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
@@ -221,11 +222,8 @@ static struct irq_chip sa1100_normal_chip = {
 	.irq_set_wake	= sa1100_set_wake,
 };
 
-static struct resource irq_resource = {
-	.name	= "irqs",
-	.start	= 0x90050000,
-	.end	= 0x9005ffff,
-};
+static struct resource irq_resource =
+	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
 
 static struct sa1100irq_state {
 	unsigned int	saved;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index ee121d6f0480..ca7a7e834720 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,9 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
-#include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -34,6 +32,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
 #include "generic.h"
 
 /*
@@ -46,7 +47,7 @@
 
 /* memory space (line 52 of HP's doc) */
 #define SA1111REGSTART	0x40000000
-#define SA1111REGLEN	0x00001fff
+#define SA1111REGLEN	0x00002000
 #define EPSONREGSTART	0x48000000
 #define EPSONREGLEN	0x00100000
 #define EPSONFBSTART	0x48200000
@@ -174,16 +175,8 @@ static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
 };
 
 static struct resource s1d13xxxfb_resources[] = {
-	[0] = {
-		.start	= EPSONFBSTART,
-		.end	= EPSONFBSTART + EPSONFBLEN,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= EPSONREGSTART,
-		.end	= EPSONREGSTART + EPSONREGLEN,
-		.flags	= IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(EPSONFBSTART, EPSONFBLEN),
+	[1] = DEFINE_RES_MEM(EPSONREGSTART, EPSONREGLEN),
 };
 
 static struct platform_device s1d13xxxfb_device = {
@@ -197,20 +190,12 @@ static struct platform_device s1d13xxxfb_device = {
 };
 
 static struct resource sa1111_resources[] = {
-	[0] = {
-		.start		= SA1111REGSTART,
-		.end		= SA1111REGSTART + SA1111REGLEN,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_GPIO1,
-		.end		= IRQ_GPIO1,
-		.flags		= IORESOURCE_IRQ,
-	},
+	[0] = DEFINE_RES_MEM(SA1111REGSTART, SA1111REGLEN),
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO1),
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
 };
 
 static u64 sa1111_dmamask = 0xffffffffUL;
@@ -284,11 +269,6 @@ static struct map_desc jornada720_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(EPSONFBSTART),
 		.length		= EPSONFBLEN,
 		.type		= MT_DEVICE
-	}, {	/* SA-1111 */
-		.virtual	= 0xf4000000,
-		.pfn		= __phys_to_pfn(SA1111REGSTART),
-		.length		= SA1111REGLEN,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -352,11 +332,8 @@ static struct flash_platform_data jornada720_flash_data = {
 	.nr_parts	= ARRAY_SIZE(jornada720_partitions),
 };
 
-static struct resource jornada720_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource jornada720_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
 
 static void __init jornada720_mach_init(void)
 {
@@ -367,6 +344,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
 	.atag_offset	= 0x100,
 	.map_io		= jornada720_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= jornada720_mach_init,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3db..eb6534e0b0d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -15,6 +17,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -26,8 +29,86 @@ static struct mcp_plat_data lart_mcp_data = {
 	.sclk_rate	= 11981000,
 };
 
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+	.pixclock	= 150000,	.bpp		= 4,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 1,		.vsync_len	= 1,
+	.left_margin	= 4,		.upper_margin	= 0,
+	.right_margin	= 2,		.lower_margin	= 0,
+
+	.cmap_greyscale	= 1,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+	.pixclock	= 150000,	.bpp		= 16,
+	.xres		= 320,		.yres		= 240,
+
+	.hsync_len	= 2,		.vsync_len	= 3,
+	.left_margin	= 69,		.upper_margin	= 14,
+	.right_margin	= 8,		.lower_margin	= 4,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+	.pixclock	= 39721,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 95,		.vsync_len	= 2,
+	.left_margin	= 40,		.upper_margin	= 32,
+	.right_margin	= 24,		.lower_margin	= 11,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+	.pixclock	= 63291,	.bpp		= 16,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 64,		.vsync_len	= 3,
+	.left_margin	= 122,		.upper_margin	= 45,
+	.right_margin	= 10,		.lower_margin	= 10,
+
+	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
 static void __init lart_init(void)
 {
+	struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+	inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+	inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+	inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+	inf = &lart_kit01_info;
+#endif
+
+	if (inf)
+		sa11x0_register_lcd(inf);
+
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 
@@ -63,6 +144,7 @@ static void __init lart_map_io(void)
 MACHINE_START(LART, "LART")
 	.atag_offset	= 0x100,
 	.map_io		= lart_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 85f6ee672225..8f6446b9f025 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -28,6 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/nanoengine.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -58,15 +59,8 @@ static struct flash_platform_data nanoengine_flash_data = {
 };
 
 static struct resource nanoengine_flash_resources[] = {
-	{
-		.start	= SA1100_CS0_PHYS,
-		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= SA1100_CS1_PHYS,
-		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
 };
 
 static struct map_desc nanoengine_io_desc[] __initdata = {
@@ -114,6 +108,7 @@ static void __init nanoengine_init(void)
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
 	.atag_offset	= 0x100,
 	.map_io		= nanoengine_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= nanoengine_init,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index b4fa53a1427e..6c58f01b358a 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -1,89 +1,104 @@
 /*
  * linux/arch/arm/mach-sa1100/neponset.c
- *
  */
-#include <linux/kernel.h>
+#include <linux/err.h>
 #include <linux/init.h>
-#include <linux/tty.h>
 #include <linux/ioport.h>
-#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/slab.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <mach/assabet.h>
-#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
-/*
- * Install handler for Neponset IRQ.  Note that we have to loop here
- * since the ETHERNET and USAR IRQs are level based, and we need to
- * ensure that the IRQ signal is deasserted before returning.  This
- * is rather unfortunate.
- */
-static void
-neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int irr;
-
-	while (1) {
-		/*
-		 * Acknowledge the parent IRQ.
-		 */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		/*
-		 * Read the interrupt reason register.  Let's have all
-		 * active IRQ bits high.  Note: there is a typo in the
-		 * Neponset user's guide for the SA1111 IRR level.
-		 */
-		irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
-
-		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
-			break;
-
-		/*
-		 * Since there is no individual mask, we have to
-		 * mask the parent IRQ.  This is safe, since we'll
-		 * recheck the register for any pending IRQs.
-		 */
-		if (irr & (IRR_ETHERNET | IRR_USAR)) {
-			desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-			/*
-			 * Ack the interrupt now to prevent re-entering
-			 * this neponset handler.  Again, this is safe
-			 * since we'll check the IRR register prior to
-			 * leaving.
-			 */
-			desc->irq_data.chip->irq_ack(&desc->irq_data);
+#include <mach/hardware.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
+#include <mach/irqs.h>
+
+#define NEP_IRQ_SMC91X	0
+#define NEP_IRQ_USAR	1
+#define NEP_IRQ_SA1111	2
+#define NEP_IRQ_NR	3
+
+#define WHOAMI		0x00
+#define LEDS		0x10
+#define SWPK		0x20
+#define IRR		0x24
+#define KP_Y_IN		0x80
+#define KP_X_OUT	0x90
+#define NCR_0		0xa0
+#define MDM_CTL_0	0xb0
+#define MDM_CTL_1	0xb4
+#define AUD_CTL		0xc0
+
+#define IRR_ETHERNET	(1 << 0)
+#define IRR_USAR	(1 << 1)
+#define IRR_SA1111	(1 << 2)
+
+#define MDM_CTL0_RTS1	(1 << 0)
+#define MDM_CTL0_DTR1	(1 << 1)
+#define MDM_CTL0_RTS2	(1 << 2)
+#define MDM_CTL0_DTR2	(1 << 3)
+
+#define MDM_CTL1_CTS1	(1 << 0)
+#define MDM_CTL1_DSR1	(1 << 1)
+#define MDM_CTL1_DCD1	(1 << 2)
+#define MDM_CTL1_CTS2	(1 << 3)
+#define MDM_CTL1_DSR2	(1 << 4)
+#define MDM_CTL1_DCD2	(1 << 5)
+
+#define AUD_SEL_1341	(1 << 0)
+#define AUD_MUTE_1341	(1 << 1)
 
-			if (irr & IRR_ETHERNET) {
-				generic_handle_irq(IRQ_NEPONSET_SMC9196);
-			}
+extern void sa1110_mb_disable(void);
 
-			if (irr & IRR_USAR) {
-				generic_handle_irq(IRQ_NEPONSET_USAR);
-			}
+struct neponset_drvdata {
+	void __iomem *base;
+	struct platform_device *sa1111;
+	struct platform_device *smc91x;
+	unsigned irq_base;
+#ifdef CONFIG_PM_SLEEP
+	u32 ncr0;
+	u32 mdm_ctl_0;
+#endif
+};
 
-			desc->irq_data.chip->irq_unmask(&desc->irq_data);
-		}
+static void __iomem *nep_base;
 
-		if (irr & IRR_SA1111) {
-			generic_handle_irq(IRQ_NEPONSET_SA1111);
-		}
+void neponset_ncr_frob(unsigned int mask, unsigned int val)
+{
+	void __iomem *base = nep_base;
+
+	if (base) {
+		unsigned long flags;
+		unsigned v;
+
+		local_irq_save(flags);
+		v = readb_relaxed(base + NCR_0);
+		writeb_relaxed((v & ~mask) | val, base + NCR_0);
+		local_irq_restore(flags);
+	} else {
+		WARN(1, "nep_base unset\n");
 	}
 }
 
 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 {
-	u_int mdm_ctl0 = MDM_CTL_0;
+	void __iomem *base = nep_base;
+	u_int mdm_ctl0;
 
+	if (!base)
+		return;
+
+	mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
 	if (port->mapbase == _Ser1UTCR0) {
 		if (mctrl & TIOCM_RTS)
 			mdm_ctl0 &= ~MDM_CTL0_RTS2;
@@ -106,14 +121,19 @@ static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 			mdm_ctl0 |= MDM_CTL0_DTR1;
 	}
 
-	MDM_CTL_0 = mdm_ctl0;
+	writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
 }
 
 static u_int neponset_get_mctrl(struct uart_port *port)
 {
+	void __iomem *base = nep_base;
 	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-	u_int mdm_ctl1 = MDM_CTL_1;
+	u_int mdm_ctl1;
+
+	if (!base)
+		return ret;
 
+	mdm_ctl1 = readb_relaxed(base + MDM_CTL_1);
 	if (port->mapbase == _Ser1UTCR0) {
 		if (mdm_ctl1 & MDM_CTL1_DCD2)
 			ret &= ~TIOCM_CD;
@@ -138,209 +158,278 @@ static struct sa1100_port_fns neponset_port_fns __devinitdata = {
 	.get_mctrl	= neponset_get_mctrl,
 };
 
-static int __devinit neponset_probe(struct platform_device *dev)
+/*
+ * Install handler for Neponset IRQ.  Note that we have to loop here
+ * since the ETHERNET and USAR IRQs are level based, and we need to
+ * ensure that the IRQ signal is deasserted before returning.  This
+ * is rather unfortunate.
+ */
+static void neponset_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	sa1100_register_uart_fns(&neponset_port_fns);
+	struct neponset_drvdata *d = irq_desc_get_handler_data(desc);
+	unsigned int irr;
 
-	/*
-	 * Install handler for GPIO25.
-	 */
-	irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler);
+	while (1) {
+		/*
+		 * Acknowledge the parent IRQ.
+		 */
+		desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-	/*
-	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but
-	 * unfortunately something on the Neponset activates
-	 * this IRQ on sleep (ethernet?)
-	 */
-#if 0
-	enable_irq_wake(IRQ_GPIO25);
-#endif
+		/*
+		 * Read the interrupt reason register.  Let's have all
+		 * active IRQ bits high.  Note: there is a typo in the
+		 * Neponset user's guide for the SA1111 IRR level.
+		 */
+		irr = readb_relaxed(d->base + IRR);
+		irr ^= IRR_ETHERNET | IRR_USAR;
 
-	/*
-	 * Setup other Neponset IRQs.  SA1111 will be done by the
-	 * generic SA1111 code.
-	 */
-	irq_set_handler(IRQ_NEPONSET_SMC9196, handle_simple_irq);
-	set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
-	irq_set_handler(IRQ_NEPONSET_USAR, handle_simple_irq);
-	set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
+		if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
+			break;
 
-	/*
-	 * Disable GPIO 0/1 drivers so the buttons work on the module.
-	 */
-	NCR_0 = NCR_GP01_OFF;
+		/*
+		 * Since there is no individual mask, we have to
+		 * mask the parent IRQ.  This is safe, since we'll
+		 * recheck the register for any pending IRQs.
+		 */
+		if (irr & (IRR_ETHERNET | IRR_USAR)) {
+			desc->irq_data.chip->irq_mask(&desc->irq_data);
 
-	return 0;
-}
+			/*
+			 * Ack the interrupt now to prevent re-entering
+			 * this neponset handler.  Again, this is safe
+			 * since we'll check the IRR register prior to
+			 * leaving.
+			 */
+			desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-#ifdef CONFIG_PM
+			if (irr & IRR_ETHERNET)
+				generic_handle_irq(d->irq_base + NEP_IRQ_SMC91X);
 
-/*
- * LDM power management.
- */
-static unsigned int neponset_saved_state;
+			if (irr & IRR_USAR)
+				generic_handle_irq(d->irq_base + NEP_IRQ_USAR);
 
-static int neponset_suspend(struct platform_device *dev, pm_message_t state)
-{
-	/*
-	 * Save state.
-	 */
-	neponset_saved_state = NCR_0;
+			desc->irq_data.chip->irq_unmask(&desc->irq_data);
+		}
 
-	return 0;
+		if (irr & IRR_SA1111)
+			generic_handle_irq(d->irq_base + NEP_IRQ_SA1111);
+	}
 }
 
-static int neponset_resume(struct platform_device *dev)
+/* Yes, we really do not have any kind of masking or unmasking */
+static void nochip_noop(struct irq_data *irq)
 {
-	NCR_0 = neponset_saved_state;
-
-	return 0;
 }
 
-#else
-#define neponset_suspend NULL
-#define neponset_resume  NULL
-#endif
-
-static struct platform_driver neponset_device_driver = {
-	.probe		= neponset_probe,
-	.suspend	= neponset_suspend,
-	.resume		= neponset_resume,
-	.driver		= {
-		.name	= "neponset",
-	},
-};
-
-static struct resource neponset_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x17ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device neponset_device = {
-	.name		= "neponset",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(neponset_resources),
-	.resource	= neponset_resources,
-};
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x40000000,
-		.end	= 0x40001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NEPONSET_SA1111,
-		.end	= IRQ_NEPONSET_SA1111,
-		.flags	= IORESOURCE_IRQ,
-	},
+static struct irq_chip nochip = {
+	.name = "neponset",
+	.irq_ack = nochip_noop,
+	.irq_mask = nochip_noop,
+	.irq_unmask = nochip_noop,
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.disable_devs	= SA1111_DEVID_PS2_MSE,
 };
 
-static u64 sa1111_dmamask = 0xffffffffUL;
+static int __devinit neponset_probe(struct platform_device *dev)
+{
+	struct neponset_drvdata *d;
+	struct resource *nep_res, *sa1111_res, *smc91x_res;
+	struct resource sa1111_resources[] = {
+		DEFINE_RES_MEM(0x40000000, SZ_8K),
+		{ .flags = IORESOURCE_IRQ },
+	};
+	struct platform_device_info sa1111_devinfo = {
+		.parent = &dev->dev,
+		.name = "sa1111",
+		.id = 0,
+		.res = sa1111_resources,
+		.num_res = ARRAY_SIZE(sa1111_resources),
+		.data = &sa1111_info,
+		.size_data = sizeof(sa1111_info),
+		.dma_mask = 0xffffffffUL,
+	};
+	struct resource smc91x_resources[] = {
+		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS,
+			0x02000000, "smc91x-regs"),
+		DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000,
+			0x02000000, "smc91x-attrib"),
+		{ .flags = IORESOURCE_IRQ },
+	};
+	struct platform_device_info smc91x_devinfo = {
+		.parent = &dev->dev,
+		.name = "smc91x",
+		.id = 0,
+		.res = smc91x_resources,
+		.num_res = ARRAY_SIZE(smc91x_resources),
+	};
+	int ret, irq;
+
+	if (nep_base)
+		return -EBUSY;
+
+	irq = ret = platform_get_irq(dev, 0);
+	if (ret < 0)
+		goto err_alloc;
+
+	nep_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	smc91x_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	sa1111_res = platform_get_resource(dev, IORESOURCE_MEM, 2);
+	if (!nep_res || !smc91x_res || !sa1111_res) {
+		ret = -ENXIO;
+		goto err_alloc;
+	}
 
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
+	d = kzalloc(sizeof(*d), GFP_KERNEL);
+	if (!d) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
 
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= SA1100_CS3_PHYS,
-		.end	= SA1100_CS3_PHYS + 0x01ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NEPONSET_SMC9196,
-		.end	= IRQ_NEPONSET_SMC9196,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= SA1100_CS3_PHYS + 0x02000000,
-		.end	= SA1100_CS3_PHYS + 0x03ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
+	d->base = ioremap(nep_res->start, SZ_4K);
+	if (!d->base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
 
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
+	if (readb_relaxed(d->base + WHOAMI) != 0x11) {
+		dev_warn(&dev->dev, "Neponset board detected, but wrong ID: %02x\n",
+			 readb_relaxed(d->base + WHOAMI));
+		ret = -ENODEV;
+		goto err_id;
+	}
 
-static struct platform_device *devices[] __initdata = {
-	&neponset_device,
-	&sa1111_device,
-	&smc91x_device,
-};
+	ret = irq_alloc_descs(-1, IRQ_BOARD_START, NEP_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(&dev->dev, "unable to allocate %u irqs: %d\n",
+			NEP_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -ENOMEM;
+		goto err_irq_alloc;
+	}
 
-extern void sa1110_mb_disable(void);
+	d->irq_base = ret;
 
-static int __init neponset_init(void)
-{
-	platform_driver_register(&neponset_device_driver);
+	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_SMC91X, &nochip,
+		handle_simple_irq);
+	set_irq_flags(d->irq_base + NEP_IRQ_SMC91X, IRQF_VALID | IRQF_PROBE);
+	irq_set_chip_and_handler(d->irq_base + NEP_IRQ_USAR, &nochip,
+		handle_simple_irq);
+	set_irq_flags(d->irq_base + NEP_IRQ_USAR, IRQF_VALID | IRQF_PROBE);
+	irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip);
 
-	/*
-	 * The Neponset is only present on the Assabet machine type.
-	 */
-	if (!machine_is_assabet())
-		return -ENODEV;
+	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(irq, d);
+	irq_set_chained_handler(irq, neponset_irq_handler);
 
 	/*
-	 * Ensure that the memory bus request/grant signals are setup,
-	 * and the grant is held in its inactive state, whether or not
-	 * we actually have a Neponset attached.
+	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
+	 * something on the Neponset activates this IRQ on sleep (eth?)
 	 */
+#if 0
+	enable_irq_wake(irq);
+#endif
+
+	dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
+		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
+	nep_base = d->base;
+
+	sa1100_register_uart_fns(&neponset_port_fns);
+
+	/* Ensure that the memory bus request/grant signals are setup */
 	sa1110_mb_disable();
 
-	if (!machine_has_neponset()) {
-		printk(KERN_DEBUG "Neponset expansion board not present\n");
-		return -ENODEV;
-	}
+	/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
+	writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
 
-	if (WHOAMI != 0x11) {
-		printk(KERN_WARNING "Neponset board detected, but "
-			"wrong ID: %02x\n", WHOAMI);
-		return -ENODEV;
-	}
+	sa1111_resources[0].parent = sa1111_res;
+	sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
+	sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
+	d->sa1111 = platform_device_register_full(&sa1111_devinfo);
+
+	smc91x_resources[0].parent = smc91x_res;
+	smc91x_resources[1].parent = smc91x_res;
+	smc91x_resources[2].start = d->irq_base + NEP_IRQ_SMC91X;
+	smc91x_resources[2].end = d->irq_base + NEP_IRQ_SMC91X;
+	d->smc91x = platform_device_register_full(&smc91x_devinfo);
+
+	platform_set_drvdata(dev, d);
 
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
+	return 0;
+
+ err_irq_alloc:
+ err_id:
+	iounmap(d->base);
+ err_ioremap:
+	kfree(d);
+ err_alloc:
+	return ret;
 }
 
-subsys_initcall(neponset_init);
+static int __devexit neponset_remove(struct platform_device *dev)
+{
+	struct neponset_drvdata *d = platform_get_drvdata(dev);
+	int irq = platform_get_irq(dev, 0);
+
+	if (!IS_ERR(d->sa1111))
+		platform_device_unregister(d->sa1111);
+	if (!IS_ERR(d->smc91x))
+		platform_device_unregister(d->smc91x);
+	irq_set_chained_handler(irq, NULL);
+	irq_free_descs(d->irq_base, NEP_IRQ_NR);
+	nep_base = NULL;
+	iounmap(d->base);
+	kfree(d);
 
-static struct map_desc neponset_io_desc[] __initdata = {
-	{	/* System Registers */
-		.virtual	=  0xf3000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}, {	/* SA-1111 */
-		.virtual	=  0xf4000000,
-		.pfn		= __phys_to_pfn(0x40000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int neponset_suspend(struct device *dev)
+{
+	struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+	d->ncr0 = readb_relaxed(d->base + NCR_0);
+	d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
+
+	return 0;
+}
+
+static int neponset_resume(struct device *dev)
+{
+	struct neponset_drvdata *d = dev_get_drvdata(dev);
+
+	writeb_relaxed(d->ncr0, d->base + NCR_0);
+	writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops neponset_pm_ops = {
+	.suspend_noirq = neponset_suspend,
+	.resume_noirq = neponset_resume,
+	.freeze_noirq = neponset_suspend,
+	.restore_noirq = neponset_resume,
+};
+#define PM_OPS &neponset_pm_ops
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver neponset_device_driver = {
+	.probe		= neponset_probe,
+	.remove		= __devexit_p(neponset_remove),
+	.driver		= {
+		.name	= "neponset",
+		.owner	= THIS_MODULE,
+		.pm	= PM_OPS,
+	},
 };
 
-void __init neponset_map_io(void)
+static int __init neponset_init(void)
 {
-	iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
+	return platform_driver_register(&neponset_device_driver);
 }
+
+subsys_initcall(neponset_init);
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
index b466bca9c651..b49108b890a8 100644
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -135,12 +135,8 @@ struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys
 				 &sys->resources);
 }
 
-static struct resource pci_io_ports = {
-	.name	= "PCI IO",
-	.start	= 0x400,
-	.end	= 0x7FF,
-	.flags	= IORESOURCE_IO,
-};
+static struct resource pci_io_ports =
+	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
 
 static struct resource pci_non_prefetchable_memory = {
 	.name	= "PCI non-prefetchable",
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 9307df053533..1602575a0d5c 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -37,17 +37,9 @@
 #define IRQ_GPIO_ETH0_IRQ	IRQ_GPIO21
 
 static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PLEB_ETH0_P,
-		.end	= PLEB_ETH0_P | 0x03ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
+	[0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
 #if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
-	[1] = {
-		.start	= IRQ_GPIO_ETH0_IRQ,
-		.end	= IRQ_GPIO_ETH0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
+	[1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
 #endif
 };
 
@@ -70,16 +62,8 @@ static struct platform_device *devices[] __initdata = {
  * the two SA1100 lowest chip select outputs.
  */
 static struct resource pleb_flash_resources[] = {
-	[0] = {
-		.start = SA1100_CS0_PHYS,
-		.end   = SA1100_CS0_PHYS + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = SA1100_CS1_PHYS,
-		.end   = SA1100_CS1_PHYS + SZ_8M - 1,
-		.flags = IORESOURCE_MEM,
-	}
+	[0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
+	[1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
 };
 
 
@@ -147,6 +131,7 @@ static void __init pleb_map_io(void)
 
 MACHINE_START(PLEB, "PLEB")
 	.map_io		= pleb_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine   = pleb_init,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0b..ca8bf59b9047 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -19,6 +21,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/shannon.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -46,19 +49,32 @@ static struct flash_platform_data shannon_flash_data = {
 	.nr_parts	= ARRAY_SIZE(shannon_partitions),
 };
 
-static struct resource shannon_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_4M - 1,
-	.flags		= IORESOURCE_MEM,
-};
+static struct resource shannon_flash_resource =
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
 
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
 };
 
+static struct sa1100fb_mach_info shannon_lcd_info = {
+	.pixclock	= 152500,	.bpp		= 8,
+	.xres		= 640,		.yres		= 480,
+
+	.hsync_len	= 4,		.vsync_len	= 3,
+	.left_margin	= 2,		.upper_margin	= 0,
+	.right_margin	= 1,		.lower_margin	= 0,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+	.lccr3		= LCCR3_ACBsDiv(512),
+};
+
 static void __init shannon_init(void)
 {
+	sa11x0_ppc_configure_mcp();
+	sa11x0_register_lcd(&shannon_lcd_info);
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
 }
@@ -84,6 +100,7 @@ static void __init shannon_map_io(void)
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
 	.atag_offset	= 0x100,
 	.map_io		= shannon_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.init_machine	= shannon_init,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index e17c04d6e324..3efae03cb3d7 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -7,15 +7,15 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/proc_fs.h>
-#include <linux/string.h> 
+#include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/setup.h>
 
@@ -26,6 +26,7 @@
 #include <asm/mach/serial_sa1100.h>
 #include <mach/mcp.h>
 #include <mach/simpad.h>
+#include <mach/irqs.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
@@ -176,21 +177,18 @@ static struct flash_platform_data simpad_flash_data = {
 
 
 static struct resource simpad_flash_resources [] = {
-	{
-		.start     = SA1100_CS0_PHYS,
-		.end       = SA1100_CS0_PHYS + SZ_16M -1,
-		.flags     = IORESOURCE_MEM,
-	}, {
-		.start     = SA1100_CS1_PHYS,
-		.end       = SA1100_CS1_PHYS + SZ_16M -1,
-		.flags     = IORESOURCE_MEM,
-	}
+	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
+	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
+};
+
+static struct ucb1x00_plat_data simpad_ucb1x00_data = {
+	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
 };
 
 static struct mcp_plat_data simpad_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
+	.codec_pdata	= &simpad_ucb1x00_data,
 };
 
 
@@ -376,6 +374,7 @@ static int __init simpad_init(void)
 
 	pm_power_off = simpad_power_off;
 
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
 	sa11x0_register_mcp(&simpad_mcp_data);
@@ -394,6 +393,7 @@ MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
 	.atag_offset	= 0x100,
 	.map_io		= simpad_map_io,
+	.nr_irqs	= SA1100_NR_IRQS,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
 	.restart	= sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index e8223315b442..30cc6721665b 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -26,27 +26,36 @@
  *
  * Causes sa11x0 to enter sleep state
  *
+ * Must be aligned to a cacheline.
  */
-
+	.balign	32
 ENTRY(sa1100_finish_suspend)
 	@ disable clock switching
 	mcr	p15, 0, r1, c15, c2, 2
 
-        @ Adjust memory timing before lowering CPU clock
-	@ Clock speed adjustment without changing memory timing makes
-	@ CPU hang in some cases
-        ldr     r0, =MDREFR
-        ldr     r1, [r0]
-        orr     r1, r1, #MDREFR_K1DB2
-        str     r1, [r0]
+	ldr	r6, =MDREFR
+	ldr	r4, [r6]
+	orr     r4, r4, #MDREFR_K1DB2
+	ldr	r5, =PPCR
+
+	@ Pre-load __udelay into the I-cache
+	mov	r0, #1
+	bl	__udelay
+	mov	r0, r0
+
+	@ The following must all exist in a single cache line to
+	@ avoid accessing memory until this sequence is complete,
+	@ otherwise we occasionally hang.
+
+	@ Adjust memory timing before lowering CPU clock
+	str     r4, [r6]
 
 	@ delay 90us and set CPU PLL to lowest speed
 	@ fixes resume problem on high speed SA1110
 	mov	r0, #90
 	bl	__udelay
-	ldr	r0, =PPCR
 	mov	r1, #0
-	str	r1, [r0]
+	str	r1, [r5]
 	mov	r0, #90
 	bl	__udelay
 
@@ -85,12 +94,10 @@ ENTRY(sa1100_finish_suspend)
 	bic	r5, r5, #FMsk(MSC_RT)
 	bic	r5, r5, #FMsk(MSC_RT)<<16
 
-	ldr	r6, =MDREFR
-
 	ldr	r7, [r6]
-bic	r7, r7, #0x0000FF00
-bic	r7, r7, #0x000000F0
-orr	r8, r7, #MDREFR_SLFRSH
+	bic	r7, r7, #0x0000FF00
+	bic	r7, r7, #0x000000F0
+	orr	r8, r7, #MDREFR_SLFRSH
 
 	ldr	r9, =MDCNFG
 	ldr	r10, [r9]
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index b20ff93b84a5..e22fca9ad5ec 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -19,8 +19,8 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 69e33535dee6..6af26e8d55e6 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -18,6 +18,7 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 static u32 notrace sa1100_read_sched_clock(void)
 {
author	Linus Torvalds	2012-03-27 18:17:02 -0700
committer	Linus Torvalds	2012-03-27 18:17:02 -0700
commit	9e4db1c3eed55c22328d8022c2c80adb3093833f (patch)
tree	9643545e6bd182f1d3e19942f590a6a1e3198320 /arch/arm
parent	de8856d2c11f562c60ed9340a83db4a4f829a6e6 (diff)
parent	aae528d9a8ad79d4b21b1b723abc9447fdb0d200 (diff)