Merge branch 'sched/urgent' into sched/core to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

31 files changed, 348 insertions, 131 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 55ca9c7dcf6a..0467846b4cc3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -860,7 +860,7 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 344b861a55a5..ba580a9da390 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -884,7 +884,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 0a5fc5d02ce2..4168eb9dd369 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -99,13 +99,6 @@
 		#cooling-cells = <2>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -349,12 +342,6 @@
 		>;
 	};
 
-	extcon_usb1_pins: extcon_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-		>;
-	};
-
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
@@ -706,10 +693,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
index e0ea6a93a22e..792a64ee0df7 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -4,6 +4,157 @@
  * published by the Free Software Foundation.
  */
 
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
 &pllss_clocks {
 	timer1_fck: timer1_fck {
 		#clock-cells = <0>;
@@ -23,6 +174,24 @@
 		reg = <0x2e0>;
 	};
 
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
 	sysclk18_ck: sysclk18_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
@@ -79,37 +248,6 @@
 		compatible = "fixed-clock";
 		clock-frequency = <1000000000>;
 	};
-
-	sysclk4_ck: sysclk4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <222000000>;
-	};
-
-	sysclk6_ck: sysclk6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	sysclk10_ck: sysclk10_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-	};
-
-        cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <250000000>;
-	};
-
 };
 
 &prcm_clocks {
@@ -138,6 +276,49 @@
 		clock-div = <78125>;
 	};
 
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
index 6f98dc8df9dd..0e49741747ef 100644
--- a/arch/arm/boot/dts/dra62x-clocks.dtsi
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -6,6 +6,32 @@
 
 #include "dm814x-clocks.dtsi"
 
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
 /*
  * Compared to dm814x, dra62x has different shifts and more mux options.
  * Please add the extra options for ysclk_14 and 16 if really needed.
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index d0bae06b7eb7..ef2164a99d0f 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -98,12 +98,20 @@
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -2170,4 +2178,12 @@
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
 };
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a96a726..d9e2d9c6e999 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -336,30 +337,35 @@
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -367,6 +373,7 @@
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -374,6 +381,7 @@
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -381,6 +389,7 @@
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vio {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 387dc31822fe..96f8ce7bd2af 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -46,7 +46,7 @@
 			       0x480bd800 0x017c>;
 			interrupts = <24>;
 			iommus = <&mmu_isp>;
-			syscon = <&scm_conf 0xdc>;
+			syscon = <&scm_conf 0x6c>;
 			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
 			#clock-cells = <1>;
 			ports {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 902657d6713b..914bf4c47404 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -472,7 +472,7 @@
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -498,7 +498,7 @@
 				ldo4_reg: ldo4 {
 					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ecc591dc0778..4d87d9c6c86d 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -513,7 +513,7 @@
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -537,7 +537,7 @@
 				ldo4_reg: ldo4 {
 					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 38805ebbe2ba..120b6b80cd39 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -269,7 +269,7 @@
 			omap5_pmx_wkup: pinmux@c840 {
 				compatible = "ti,omap5-padconf",
 					     "pinctrl-single";
-				reg = <0xc840 0x0038>;
+				reg = <0xc840 0x003c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 65d0e8d98259..04f541bffbdd 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -666,7 +666,7 @@
 		};
 
 		sata0: sata@29000000 {
-			compatible		= "generic-ahci";
+			compatible		= "qcom,apq8064-ahci", "generic-ahci";
 			status			= "disabled";
 			reg			= <0x29000000 0x180>;
 			interrupts		= <GIC_SPI 209 IRQ_TYPE_NONE>;
@@ -688,6 +688,7 @@
 
 			phys			= <&sata_phy0>;
 			phy-names		= "sata-phy";
+			ports-implemented	= <0x1>;
 		};
 
 		/* Temporary fixed regulator */
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ef5330578431..8193139d0d87 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -460,8 +460,6 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -479,16 +477,6 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
 	};
 
 	smd {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0ad71b81d3a2..cc6e28f81fe4 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -661,6 +661,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6c08314427d6..a9285d9a57cd 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -143,19 +143,11 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
 
-	scif_clk_pins: scif_clk {
-		renesas,groups = "scif_clk";
-		renesas,function = "scif_clk";
-	};
-
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -229,11 +221,6 @@
 	status = "okay";
 };
 
-&scif_clk {
-	clock-frequency = <14745600>;
-	status = "okay";
-};
-
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
@@ -414,6 +401,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6439f0569fe2..1cd1b6a3a72a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1083,9 +1083,8 @@
 		pcie_bus_clk: pcie_bus_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+			clock-frequency = <0>;
 			clock-output-names = "pcie_bus";
-			status = "disabled";
 		};
 
 		/* External SCIF clock */
@@ -1094,7 +1093,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			status = "disabled";
 		};
 
 		/* External USB clock - can be overridden by the board */
@@ -1112,7 +1110,6 @@
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
 			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 9d2b7e2f5975..346a49d805a7 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -125,8 +125,6 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
 	regulator-name = "vcc-lcd";
 };
 
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index fc8ba1663601..99d9f630d6b6 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -84,6 +84,7 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_CPU_CP15_MMU
 static inline unsigned int get_domain(void)
 {
 	unsigned int domain;
@@ -103,6 +104,16 @@ static inline void set_domain(unsigned val)
 	  : : "r" (val) : "memory");
 	isb();
 }
+#else
+static inline unsigned int get_domain(void)
+{
+	return 0;
+}
+
+static inline void set_domain(unsigned val)
+{
+}
+#endif
 
 #ifdef CONFIG_CPU_USE_DOMAINS
 #define modify_domain(dom,type)					\
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 9b8c5a113434..fb1a69eb49c1 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -236,7 +236,7 @@ ENTRY(__setup_mpu)
 	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
 	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
 	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
-	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+	mov	r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
 	beq	3f				@ Memory-map not unified
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 58dbd5c439df..d6d4191e68f2 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -1004,7 +1004,7 @@ static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
 	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *ipap >> PAGE_SHIFT;
 
-	if (PageTransCompound(pfn_to_page(pfn))) {
+	if (PageTransCompoundMap(pfn_to_page(pfn))) {
 		unsigned long mask;
 		/*
 		 * The address we faulted on is backed by a transparent huge
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index d97c588550ad..bc4e63fa9808 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -121,6 +121,11 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
+		goto bad_config;
+	}
+
 	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
 				&factory_config);
 	if (ret != sizeof(struct factory_config)) {
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index f55ef2ef2f92..742133b7266a 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -33,6 +33,11 @@ void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
+		return;
+	}
+
 	/* Read MAC addr from EEPROM */
 	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 7c21760f590f..875a2bab64f6 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -92,7 +92,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 			if (IS_ERR(pd->clk[i]))
 				break;
 
-			if (IS_ERR(pd->clk[i]))
+			if (IS_ERR(pd->pclk[i]))
 				continue; /* Skip on first power up */
 			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
 				pr_err("%s: error setting parent to clock%d\n",
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index a5edd7d60266..3d039ef021e0 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 	if (!pdata)
 		pdata = &default_esdhc_pdata;
 
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return imx_add_platform_device_dmamask(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 7581e036bda6..ef9ed36e8a61 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
 	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
 	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
 	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu1_7xx_clkdm = {
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 9821be6dfd5e..49de4dd227be 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -737,7 +737,8 @@ void __init omap5_init_late(void)
 #ifdef CONFIG_SOC_DRA7XX
 void __init dra7xx_init_early(void)
 {
-	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_tap(DRA7XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
 	omap4_pm_init_early();
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index f397bd6bd6e3..2c04f2741476 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void)
  */
 static void irq_save_context(void)
 {
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
+
 	if (!sar_base)
 		sar_base = omap4_get_sar_ram_base();
 
@@ -290,6 +294,9 @@ static void irq_sar_clear(void)
 {
 	u32 val;
 	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
 
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 2dbd3785ee6f..d44e0e2f1106 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -198,7 +198,6 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -278,16 +277,20 @@ void omap_sram_idle(void)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
 	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
-		if (core_prev_state == PWRDM_POWER_OFF) {
-			omap3_core_restore_context();
-			omap3_cm_restore_context();
-			omap3_sram_restore_context();
-			omap2_sms_restore_context();
-		}
+	if (core_next_state < PWRDM_POWER_ON &&
+	    pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
+		omap3_core_restore_context();
+		omap3_cm_restore_context();
+		omap3_sram_restore_context();
+		omap2_sms_restore_context();
+	} else {
+		/*
+		 * In off-mode resume path above, omap3_core_restore_context
+		 * also handles the INTC autoidle restore done here so limit
+		 * this to non-off mode resume paths so we don't do it twice.
+		 */
+		omap3_intc_resume_idle();
 	}
-	omap3_intc_resume_idle();
 
 	pwrdm_post_transition(NULL);
 
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index ad008e4b0c49..67d79f9c6bad 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
 void __init shmobile_init_delay(void)
 {
 	struct device_node *np, *cpus;
-	bool is_a7_a8_a9 = false;
-	bool is_a15 = false;
+	unsigned int div = 0;
 	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
@@ -55,27 +54,22 @@ void __init shmobile_init_delay(void)
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
 
-		if (of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9")) {
-			is_a7_a8_a9 = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
-			is_a7_a8_a9 = true;
-			has_arch_timer = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
-			is_a15 = true;
+		if (of_device_is_compatible(np, "arm,cortex-a8")) {
+			div = 2;
+		} else if (of_device_is_compatible(np, "arm,cortex-a9")) {
+			div = 1;
+		} else if (of_device_is_compatible(np, "arm,cortex-a7") ||
+			 of_device_is_compatible(np, "arm,cortex-a15")) {
+			div = 1;
 			has_arch_timer = true;
 		}
 	}
 
 	of_node_put(cpus);
 
-	if (!max_freq)
+	if (!max_freq || !div)
 		return;
 
-	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
-		if (is_a7_a8_a9)
-			shmobile_setup_delay_hz(max_freq, 1, 3);
-		else if (is_a15)
-			shmobile_setup_delay_hz(max_freq, 2, 4);
-	}
+	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+		shmobile_setup_delay_hz(max_freq, 1, div);
 }
diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S
index 5d94b7a2fb10..c160fa3007e9 100644
--- a/arch/arm/mach-socfpga/headsmp.S
+++ b/arch/arm/mach-socfpga/headsmp.S
@@ -13,6 +13,7 @@
 #include <asm/assembler.h>
 
 	.arch	armv7-a
+	.arm
 
 ENTRY(secondary_trampoline)
 	/* CPU1 will always fetch from 0x0 when it is brought out of reset.
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 1dd10936d68d..d5805e4bf2fc 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -87,7 +87,6 @@ static unsigned long irbar_read(void)
 /* MPU initialisation functions */
 void __init sanity_check_meminfo_mpu(void)
 {
-	int i;
 	phys_addr_t phys_offset = PHYS_OFFSET;
 	phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
 	struct memblock_region *reg;
@@ -110,11 +109,13 @@ void __init sanity_check_meminfo_mpu(void)
 		} else {
 			/*
 			 * memblock auto merges contiguous blocks, remove
-			 * all blocks afterwards
+			 * all blocks afterwards in one go (we can't remove
+			 * blocks separately while iterating)
 			 */
 			pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
-				  &mem_start, &reg->base);
-			memblock_remove(reg->base, reg->size);
+				  &mem_end, &reg->base);
+			memblock_remove(reg->base, 0 - reg->base);
+			break;
 		}
 	}
 
@@ -144,7 +145,7 @@ void __init sanity_check_meminfo_mpu(void)
 		pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
 				&specified_mem_size, &aligned_region_size);
 		memblock_remove(mem_start + aligned_region_size,
-				specified_mem_size - aligned_round_size);
+				specified_mem_size - aligned_region_size);
 
 		mem_end = mem_start + aligned_region_size;
 	}
@@ -261,7 +262,7 @@ void __init mpu_setup(void)
 		return;
 
 	region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
-					ilog2(meminfo.bank[0].size),
+					ilog2(memblock.memory.regions[0].size),
 					MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
 	if (region_err) {
 		panic("MPU region initialization failure! %d", region_err);
@@ -285,7 +286,7 @@ void __init arm_mm_memblock_reserve(void)
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
+	memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*
 	 * There is no dedicated vector page on V7-M. So nothing needs to be