aboutsummaryrefslogtreecommitdiff
path: root/arch/cris
diff options
context:
space:
mode:
authorPaul Bolle2011-10-13 18:12:48 +0200
committerJiri Kosina2011-10-13 18:12:48 +0200
commitc0b5bf090bb47104ac78f463063933966c6ca00b (patch)
tree2a2d0c9955f8e93f65a3c42776a76f87baec1a18 /arch/cris
parent6be9dd121ddeca9dcfb35aee96273c92bbd28014 (diff)
cris: remove arch/cris/arch-v32/lib/nand_init.S
Commit 3f50c0673cf5edd2c6bb76243410c3cd59b3b62d ("CRIS v32: Update boot/rescue/head.S code") removed the last reference to that file. So this file is unused since v2.6.25. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'arch/cris')
-rw-r--r--arch/cris/arch-v32/lib/nand_init.S178
1 files changed, 0 insertions, 178 deletions
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
deleted file mode 100644
index d671fed451c9..000000000000
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ /dev/null
@@ -1,178 +0,0 @@
-##=============================================================================
-##
-## nand_init.S
-##
-## The bootrom copies data from the NAND flash to the internal RAM but
-## due to a bug/feature we can only trust the 256 first bytes. So this
-## code copies more data from NAND flash to internal RAM. Obvioulsy this
-## code must fit in the first 256 bytes so alter with care.
-##
-## Some notes about the bug/feature for future reference:
-## The bootrom copies the first 127 KB from NAND flash to internal
-## memory. The problem is that it does a bytewise copy. NAND flashes
-## does autoincrement on the address so for a 16-bite device each
-## read/write increases the address by two. So the copy loop in the
-## bootrom will discard every second byte. This is solved by inserting
-## zeroes in every second byte in the first erase block.
-##
-## The bootrom also incorrectly assumes that it can read the flash
-## linear with only one read command but the flash will actually
-## switch between normal area and spare area if you do that so we
-## can't trust more than the first 256 bytes.
-##
-##=============================================================================
-
-#include <arch/hwregs/asm/reg_map_asm.h>
-#include <arch/hwregs/asm/gio_defs_asm.h>
-#include <arch/hwregs/asm/pinmux_defs_asm.h>
-#include <arch/hwregs/asm/bif_core_defs_asm.h>
-#include <arch/hwregs/asm/config_defs_asm.h>
-
-;; There are 8-bit NAND flashes and 16-bit NAND flashes.
-;; We need to treat them slightly different.
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
-#define PAGE_SIZE 256
-#else
-#error 2
-#define PAGE_SIZE 512
-#endif
-#define ERASE_BLOCK 16384
-
-;; GPIO pins connected to NAND flash
-#define CE 4
-#define CLE 5
-#define ALE 6
-#define BY 7
-
-;; Address space for NAND flash
-#define NAND_RD_ADDR 0x90000000
-#define NAND_WR_ADDR 0x94000000
-
-#define READ_CMD 0x00
-
-;; Readability macros
-#define CSP_MASK \
- REG_MASK(bif_core, rw_grp3_cfg, gated_csp0) | \
- REG_MASK(bif_core, rw_grp3_cfg, gated_csp1)
-#define CSP_VAL \
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)
-
-;;----------------------------------------------------------------------------
-;; Macros to set/clear GPIO bits
-
-.macro SET x
- or.b (1<<\x),$r9
- move.d $r9, [$r2]
-.endm
-
-.macro CLR x
- and.b ~(1<<\x),$r9
- move.d $r9, [$r2]
-.endm
-
-;;----------------------------------------------------------------------------
-
-nand_boot:
- ;; Check if nand boot was selected
- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
- move.d [$r0], $r0
- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
- bne normal_boot ; No NAND boot
- nop
-
-copy_nand_to_ram:
- ;; copy_nand_to_ram
- ;; Arguments
- ;; r10 - destination
- ;; r11 - source offset
- ;; r12 - size
- ;; r13 - Address to jump to after completion
- ;; Note : r10-r12 are clobbered on return
- ;; Registers used:
- ;; r0 - NAND_RD_ADDR
- ;; r1 - NAND_WR_ADDR
- ;; r2 - reg_gio_rw_pa_dout
- ;; r3 - reg_gio_r_pa_din
- ;; r4 - tmp
- ;; r5 - byte counter within a page
- ;; r6 - reg_pinmux_rw_pa
- ;; r7 - reg_gio_rw_pa_oe
- ;; r8 - reg_bif_core_rw_grp3_cfg
- ;; r9 - reg_gio_rw_pa_dout shadow
- move.d 0x90000000, $r0
- move.d 0x94000000, $r1
- move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
- move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
- move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8
-
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- lsrq 1, $r11
-#endif
- ;; Set up GPIO
- move.d [$r2], $r9
- move.d [$r7], $r4
- or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
- move.d $r4, [$r7]
-
- ;; Set up bif
- move.d [$r8], $r4
- and.d CSP_MASK, $r4
- or.d CSP_VAL, $r4
- move.d $r4, [$r8]
-
-1: ;; Copy one page
- CLR CE
- SET CLE
- moveq READ_CMD, $r4
- move.b $r4, [$r1]
- moveq 20, $r4
-2: bne 2b
- subq 1, $r4
- CLR CLE
- SET ALE
- clear.w [$r1] ; Column address = 0
- move.d $r11, $r4
- lsrq 8, $r4
- move.b $r4, [$r1] ; Row address
- lsrq 8, $r4
- move.b $r4, [$r1] ; Row address
- moveq 20, $r4
-2: bne 2b
- subq 1, $r4
- CLR ALE
-2: move.d [$r3], $r4
- and.d 1 << BY, $r4
- beq 2b
- movu.w PAGE_SIZE, $r5
-2: ; Copy one byte/word
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- move.w [$r0], $r4
-#else
- move.b [$r0], $r4
-#endif
- subq 1, $r5
- bne 2b
-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
- move.w $r4, [$r10+]
- subu.w PAGE_SIZE*2, $r12
-#else
- move.b $r4, [$r10+]
- subu.w PAGE_SIZE, $r12
-#endif
- bpl 1b
- addu.w PAGE_SIZE, $r11
-
- ;; End of copy
- jump $r13
- nop
-
- ;; This will warn if the code above is too large. If you consider
- ;; to remove this you don't understand the bug/feature.
- .org 256
- .org ERASE_BLOCK
-
-normal_boot: