diff options
| author | Christoph Hellwig | 2019-08-13 09:25:03 +0200 |
|---|---|---|
| committer | Tony Luck | 2019-08-16 11:33:57 -0700 |
| commit | fc5bad03709f9c79ea299f554b6f99fc6f4fe31c (patch) | |
| tree | d02ddaa88a30e5885e8f0ce4a723415a7903a632 /arch/ia64 | |
| parent | 05933aac7b11911955de307a329dc2a7a14b7bd0 (diff) | |
ia64: remove the hpsim platform
The hpsim platform supports the HP IA64 simulator which was useful as a
bring up platform. But it is fairly non-standard vs real IA64 system
in that it for example doesn't support ACPI. It also comes with a
whole bunch of simulator specific drivers. Remove it to simplify the
IA64 port.
Note that through a weird twist only them hpsim boot loader built the
vmlinux.gz file, so the makefile targets for that are moved to the
main ia64 Makefile now.
Acked-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-18-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
Diffstat (limited to 'arch/ia64')
28 files changed, 26 insertions, 2711 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index ae3aca14506e..63db7a5378ac 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -10,11 +10,11 @@ config IA64 bool select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO - select ACPI if (!IA64_HP_SIM) - select ARCH_SUPPORTS_ACPI if (!IA64_HP_SIM) + select ACPI + select ARCH_SUPPORTS_ACPI select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI - select FORCE_PCI if (!IA64_HP_SIM) + select FORCE_PCI select PCI_DOMAINS if PCI select PCI_SYSCALL if PCI select HAVE_UNSTABLE_SCHED_CLOCK @@ -140,7 +140,6 @@ config IA64_GENERIC HP-zx1/sx1000 For HP systems HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices. SGI-UV For SGI UV systems - Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/> If you don't know what to do, choose "generic". @@ -181,11 +180,6 @@ config IA64_SGI_UV to select this option. If in doubt, select ia64 generic support instead. -config IA64_HP_SIM - bool "Ski-simulator" - select SWIOTLB - depends on !PM - endchoice choice @@ -239,14 +233,7 @@ config IA64_PAGE_SIZE_64KB endchoice -if IA64_HP_SIM -config HZ - default 32 -endif - -if !IA64_HP_SIM source "kernel/Kconfig.hz" -endif config IA64_BRL_EMU bool @@ -265,11 +252,6 @@ config IA64_CYCLONE Say Y here to enable support for IBM EXA Cyclone time source. If you're unsure, answer N. -config IOSAPIC - bool - depends on !IA64_HP_SIM - default y - config FORCE_MAX_ZONEORDER int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE range 11 17 if !HUGETLB_PAGE @@ -373,7 +355,7 @@ config ARCH_DISCONTIGMEM_DEFAULT config NUMA bool "NUMA support" - depends on !IA64_HP_SIM && !FLATMEM + depends on !FLATMEM select ACPI_NUMA if ACPI help Say Y to compile the kernel to support NUMA (Non-Uniform Memory @@ -395,7 +377,7 @@ config NODES_SHIFT config VIRTUAL_MEM_MAP bool "Virtual mem map" depends on !SPARSEMEM - default y if !IA64_HP_SIM + default y help Say Y to compile the kernel with support for a virtual mem map. This code also only takes effect if a memory hole of greater than @@ -478,7 +460,7 @@ config IA64_HP_AML_NFW config KEXEC bool "kexec system call" - depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU) + depends on !SMP || HOTPLUG_CPU select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your @@ -496,7 +478,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps" - depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU) + depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU) help Generate crash dump after being started by kexec. @@ -518,8 +500,6 @@ endif endmenu -source "arch/ia64/hp/sim/Kconfig" - config MSPEC tristate "Memory special operations driver" depends on IA64 diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 0d730b061f72..8b866fc1f9cb 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -39,6 +39,12 @@ $(error Sorry, you need a newer version of the assember, one that is built from ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz) endif +quiet_cmd_gzip = GZIP $@ +cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@ + +quiet_cmd_objcopy = OBJCOPY $@ +cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ + KBUILD_CFLAGS += $(cflags-y) head-y := arch/ia64/kernel/head.o @@ -52,15 +58,12 @@ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/ core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/ drivers-$(CONFIG_PCI) += arch/ia64/pci/ -drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/ drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ -drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/ +drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/uv/ drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/ -boot := arch/ia64/hp/sim/boot - -PHONY += boot compressed check +PHONY += compressed check all: compressed unwcheck @@ -68,22 +71,21 @@ compressed: vmlinux.gz vmlinuz: vmlinux.gz -vmlinux.gz: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $@ +vmlinux.gz: vmlinux.bin FORCE + $(call if_changed,gzip) + +vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) unwcheck: vmlinux -$(Q)READELF=$(READELF) $(PYTHON) $(srctree)/arch/ia64/scripts/unwcheck.py $< archclean: - $(Q)$(MAKE) $(clean)=$(boot) archheaders: $(Q)$(MAKE) $(build)=arch/ia64/kernel/syscalls all -CLEAN_FILES += vmlinux.gz bootloader - -boot: lib/lib.a vmlinux - $(Q)$(MAKE) $(build)=$(boot) $@ +CLEAN_FILES += vmlinux.gz install: vmlinux.gz sh $(srctree)/arch/ia64/install.sh $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)" @@ -91,7 +93,6 @@ install: vmlinux.gz define archhelp echo '* compressed - Build compressed kernel image' echo ' install - Install compressed kernel image' - echo ' boot - Build vmlinux and bootloader for Ski simulator' echo '* unwcheck - Check vmlinux for invalid unwind info' endef diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig deleted file mode 100644 index f0f69fdbddae..000000000000 --- a/arch/ia64/configs/sim_defconfig +++ /dev/null @@ -1,52 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_IA64_HP_SIM=y -CONFIG_MCKINLEY=y -CONFIG_IA64_PAGE_SIZE_64KB=y -CONFIG_SMP=y -CONFIG_NR_CPUS=64 -CONFIG_PREEMPT=y -CONFIG_IA64_PALINFO=m -CONFIG_EFI_VARS=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IPV6 is not set -# CONFIG_STANDALONE is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_EFI_RTC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_HP_SIMETH=y -CONFIG_HP_SIMSERIAL=y -CONFIG_HP_SIMSERIAL_CONSOLE=y -CONFIG_HP_SIMSCSI=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_PROC_KCORE=y -CONFIG_HUGETLBFS=y -CONFIG_NFS_FS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig deleted file mode 100644 index 56fb4f1d4f7c..000000000000 --- a/arch/ia64/hp/sim/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -menu "HP Simulator drivers" - depends on IA64_HP_SIM || IA64_GENERIC - -config HP_SIMETH - bool "Simulated Ethernet " - depends on NET - -config HP_SIMSERIAL - bool "Simulated serial driver support" - depends on TTY - -config HP_SIMSERIAL_CONSOLE - bool "Console for HP simulator" - depends on HP_SIMSERIAL - -config HP_SIMSCSI - bool "Simulated SCSI disk" - depends on SCSI=y - -endmenu - diff --git a/arch/ia64/hp/sim/Makefile b/arch/ia64/hp/sim/Makefile deleted file mode 100644 index 0224a13d2c5b..000000000000 --- a/arch/ia64/hp/sim/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# ia64/platform/hp/sim/Makefile -# -# Copyright (C) 2002 Hewlett-Packard Co. -# David Mosberger-Tang <davidm@hpl.hp.com> -# Copyright (C) 1999 Silicon Graphics, Inc. -# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com) -# - -obj-y := hpsim_irq.o hpsim_setup.o hpsim.o -obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o - -obj-$(CONFIG_HP_SIMETH) += simeth.o -obj-$(CONFIG_HP_SIMSERIAL) += simserial.o -obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o -obj-$(CONFIG_HP_SIMSCSI) += simscsi.o diff --git a/arch/ia64/hp/sim/boot/Makefile b/arch/ia64/hp/sim/boot/Makefile deleted file mode 100644 index df6e9968c845..000000000000 --- a/arch/ia64/hp/sim/boot/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# ia64/boot/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com> -# - -targets-$(CONFIG_IA64_HP_SIM) += bootloader -targets := vmlinux.bin vmlinux.gz $(targets-y) - -quiet_cmd_cptotop = LN $@ - cmd_cptotop = ln -f $< $@ - -vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y)) - $(call cmd,cptotop) - @echo ' Kernel: $@ is ready' - -boot: bootloader - -bootloader: $(obj)/bootloader - $(call cmd,cptotop) - -$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - - -LDFLAGS_bootloader = -static -T - -$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \ - lib/lib.a arch/ia64/lib/lib.a FORCE - $(call if_changed,ld) diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S deleted file mode 100644 index a7d178fb41e8..000000000000 --- a/arch/ia64/hp/sim/boot/boot_head.S +++ /dev/null @@ -1,165 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - */ - -#include <asm/asmmacro.h> -#include <asm/pal.h> - - .bss - .align 16 -stack_mem: - .skip 16834 - - .text - -/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */ -GLOBAL_ENTRY(printk) - break 0 -END(printk) - -GLOBAL_ENTRY(_start) - .prologue - .save rp, r0 - .body - movl gp = __gp - movl sp = stack_mem+16384-16 - bsw.1 - br.call.sptk.many rp=start_bootloader -0: nop 0 /* dummy nop to make unwinding work */ -END(_start) - -/* - * Set a break point on this function so that symbols are available to set breakpoints in - * the kernel being debugged. - */ -GLOBAL_ENTRY(debug_break) - br.ret.sptk.many b0 -END(debug_break) - -GLOBAL_ENTRY(ssc) - .regstk 5,0,0,0 - mov r15=in4 - break 0x80001 - br.ret.sptk.many b0 -END(ssc) - -GLOBAL_ENTRY(jmp_to_kernel) - .regstk 2,0,0,0 - mov r28=in0 - mov b7=in1 - br.sptk.few b7 -END(jmp_to_kernel) - -/* - * r28 contains the index of the PAL function - * r29--31 the args - * Return values in ret0--3 (r8--11) - */ -GLOBAL_ENTRY(pal_emulator_static) - mov r8=-1 - mov r9=256 - ;; - cmp.gtu p6,p7=r9,r28 /* r28 <= 255? */ -(p6) br.cond.sptk.few static - ;; - mov r9=512 - ;; - cmp.gtu p6,p7=r9,r28 -(p6) br.cond.sptk.few stacked - ;; -static: cmp.eq p6,p7=PAL_PTCE_INFO,r28 -(p7) br.cond.sptk.few 1f - ;; - mov r8=0 /* status = 0 */ - movl r9=0x100000000 /* tc.base */ - movl r10=0x0000000200000003 /* count[0], count[1] */ - movl r11=0x1000000000002000 /* stride[0], stride[1] */ - br.cond.sptk.few rp -1: cmp.eq p6,p7=PAL_FREQ_RATIOS,r28 -(p7) br.cond.sptk.few 1f - mov r8=0 /* status = 0 */ - movl r9 =0x100000064 /* proc_ratio (1/100) */ - movl r10=0x100000100 /* bus_ratio<<32 (1/256) */ - movl r11=0x100000064 /* itc_ratio<<32 (1/100) */ - ;; -1: cmp.eq p6,p7=PAL_RSE_INFO,r28 -(p7) br.cond.sptk.few 1f - mov r8=0 /* status = 0 */ - mov r9=96 /* num phys stacked */ - mov r10=0 /* hints */ - mov r11=0 - br.cond.sptk.few rp -1: cmp.eq p6,p7=PAL_CACHE_FLUSH,r28 /* PAL_CACHE_FLUSH */ -(p7) br.cond.sptk.few 1f - mov r9=ar.lc - movl r8=524288 /* flush 512k million cache lines (16MB) */ - ;; - mov ar.lc=r8 - movl r8=0xe000000000000000 - ;; -.loop: fc r8 - add r8=32,r8 - br.cloop.sptk.few .loop - sync.i - ;; - srlz.i - ;; - mov ar.lc=r9 - mov r8=r0 - ;; -1: cmp.eq p6,p7=PAL_PERF_MON_INFO,r28 -(p7) br.cond.sptk.few 1f - mov r8=0 /* status = 0 */ - movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */ - mov r10=0 /* reserved */ - mov r11=0 /* reserved */ - mov r16=0xffff /* implemented PMC */ - mov r17=0x3ffff /* implemented PMD */ - add r18=8,r29 /* second index */ - ;; - st8 [r29]=r16,16 /* store implemented PMC */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; - st8 [r29]=r0,16 /* clear remaining bits */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; - st8 [r29]=r17,16 /* store implemented PMD */ - st8 [r18]=r0,16 /* clear remaining bits */ - mov r16=0xf0 /* cycles count capable PMC */ - ;; - st8 [r29]=r0,16 /* clear remaining bits */ - st8 [r18]=r0,16 /* clear remaining bits */ - mov r17=0xf0 /* retired bundles capable PMC */ - ;; - st8 [r29]=r16,16 /* store cycles capable */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; - st8 [r29]=r0,16 /* clear remaining bits */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; - st8 [r29]=r17,16 /* store retired bundle capable */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; - st8 [r29]=r0,16 /* clear remaining bits */ - st8 [r18]=r0,16 /* clear remaining bits */ - ;; -1: cmp.eq p6,p7=PAL_VM_SUMMARY,r28 -(p7) br.cond.sptk.few 1f - mov r8=0 /* status = 0 */ - movl r9=0x2044040020F1865 /* num_tc_levels=2, num_unique_tcs=4 */ - /* max_itr_entry=64, max_dtr_entry=64 */ - /* hash_tag_id=2, max_pkr=15 */ - /* key_size=24, phys_add_size=50, vw=1 */ - movl r10=0x183C /* rid_size=24, impl_va_msb=60 */ - ;; -1: cmp.eq p6,p7=PAL_MEM_ATTRIB,r28 -(p7) br.cond.sptk.few 1f - mov r8=0 /* status = 0 */ - mov r9=0x80|0x01 /* NatPage|WB */ - ;; -1: br.cond.sptk.few rp -stacked: - br.ret.sptk.few rp -END(pal_emulator_static) diff --git a/arch/ia64/hp/sim/boot/bootloader.c b/arch/ia64/hp/sim/boot/bootloader.c deleted file mode 100644 index 6d804608dc81..000000000000 --- a/arch/ia64/hp/sim/boot/bootloader.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/ia64/hp/sim/boot/bootloader.c - * - * Loads an ELF kernel. - * - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Stephane Eranian <eranian@hpl.hp.com> - * - * 01/07/99 S.Eranian modified to pass command line arguments to kernel - */ -struct task_struct; /* forward declaration for elf.h */ - -#include <linux/elf.h> -#include <linux/init.h> -#include <linux/kernel.h> - -#include <asm/elf.h> -#include <asm/intrinsics.h> -#include <asm/pal.h> -#include <asm/pgtable.h> -#include <asm/sal.h> - -#include "ssc.h" - -struct disk_req { - unsigned long addr; - unsigned len; -}; - -struct disk_stat { - int fd; - unsigned count; -}; - -extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry); -extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen); -extern void debug_break (void); - -static void -cons_write (const char *buf) -{ - unsigned long ch; - - while ((ch = *buf++) != '\0') { - ssc(ch, 0, 0, 0, SSC_PUTCHAR); - if (ch == '\n') - ssc('\r', 0, 0, 0, SSC_PUTCHAR); - } -} - -#define MAX_ARGS 32 - -void -start_bootloader (void) -{ - static char mem[4096]; - static char buffer[1024]; - unsigned long off; - int fd, i; - struct disk_req req; - struct disk_stat stat; - struct elfhdr *elf; - struct elf_phdr *elf_phdr; /* program header */ - unsigned long e_entry, e_phoff, e_phnum; - register struct ia64_boot_param *bp; - char *kpath, *args; - long arglen = 0; - - ssc(0, 0, 0, 0, SSC_CONSOLE_INIT); - - /* - * S.Eranian: extract the commandline argument from the simulator - * - * The expected format is as follows: - * - * kernelname args... - * - * Both are optional but you can't have the second one without the first. - */ - arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS); - - kpath = "vmlinux"; - args = buffer; - if (arglen > 0) { - kpath = buffer; - while (*args != ' ' && *args != '\0') - ++args, --arglen; - if (*args == ' ') - *args++ = '\0', --arglen; - } - - if (arglen <= 0) { - args = ""; - arglen = 1; - } - - fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN); - - if (fd < 0) { - cons_write(kpath); - cons_write(": file not found, reboot now\n"); - for(;;); - } - stat.fd = fd; - off = 0; - - req.len = sizeof(mem); - req.addr = (long) mem; - ssc(fd, 1, (long) &req, off, SSC_READ); - ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); - - elf = (struct elfhdr *) mem; - if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) { - cons_write("not an ELF file\n"); - return; - } - if (elf->e_type != ET_EXEC) { - cons_write("not an ELF executable\n"); - return; - } - if (!elf_check_arch(elf)) { - cons_write("kernel not for this processor\n"); - return; - } - - e_entry = elf->e_entry; - e_phnum = elf->e_phnum; - e_phoff = elf->e_phoff; - - cons_write("loading "); - cons_write(kpath); - cons_write("...\n"); - - for (i = 0; i < e_phnum; ++i) { - req.len = sizeof(*elf_phdr); - req.addr = (long) mem; - ssc(fd, 1, (long) &req, e_phoff, SSC_READ); - ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); - if (stat.count != sizeof(*elf_phdr)) { - cons_write("failed to read phdr\n"); - return; - } - e_phoff += sizeof(*elf_phdr); - - elf_phdr = (struct elf_phdr *) mem; - - if (elf_phdr->p_type != PT_LOAD) - continue; - - req.len = elf_phdr->p_filesz; - req.addr = __pa(elf_phdr->p_paddr); - ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ); - ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); - memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0, - elf_phdr->p_memsz - elf_phdr->p_filesz); - } - ssc(fd, 0, 0, 0, SSC_CLOSE); - - cons_write("starting kernel...\n"); - - /* fake an I/O base address: */ - ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL); - - bp = sys_fw_init(args, arglen); - - ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS); - - debug_break(); - jmp_to_kernel((unsigned long) bp, e_entry); - - cons_write("kernel returned!\n"); - ssc(-1, 0, 0, 0, SSC_EXIT); -} diff --git a/arch/ia64/hp/sim/boot/bootloader.lds b/arch/ia64/hp/sim/boot/bootloader.lds deleted file mode 100644 index f3f284d6514c..000000000000 --- a/arch/ia64/hp/sim/boot/bootloader.lds +++ /dev/null @@ -1,67 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -OUTPUT_FORMAT("elf64-ia64-little") -OUTPUT_ARCH(ia64) -ENTRY(_start) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = 0x100000; - - _text = .; - .text : { *(__ivt_section) *(.text) } - _etext = .; - - /* Global data */ - _data = .; - .rodata : { *(.rodata) *(.rodata.*) } - .data : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS } - __gp = ALIGN (8) + 0x200000; - .got : { *(.got.plt) *(.got) } - /* We want the small data sections together, so single-instruction offsets - can access them all, and initialized data all before uninitialized, so - we can shorten the on-disk segment size. */ - .sdata : { *(.sdata) } - _edata = .; - - __bss_start = .; - .sbss : { *(.sbss) *(.scommon) } - .bss : { *(.bss) *(COMMON) } - . = ALIGN(64 / 8); - __bss_stop = .; - _end = . ; - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /* These must appear regardless of . */ -} diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c deleted file mode 100644 index 517fb2822e04..000000000000 --- a/arch/ia64/hp/sim/boot/fw-emu.c +++ /dev/null @@ -1,374 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PAL & SAL emulation. - * - * Copyright (C) 1998-2001 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - */ - -#ifdef CONFIG_PCI -# include <linux/pci.h> -#endif - -#include <linux/efi.h> -#include <asm/io.h> -#include <asm/pal.h> -#include <asm/sal.h> -#include <asm/setup.h> - -#include "ssc.h" - -#define MB (1024*1024UL) - -#define SIMPLE_MEMMAP 1 - -#if SIMPLE_MEMMAP -# define NUM_MEM_DESCS 4 -#else -# define NUM_MEM_DESCS 16 -#endif - -static char fw_mem[( sizeof(struct ia64_boot_param) - + sizeof(efi_system_table_t) - + sizeof(efi_runtime_services_t) - + 1*sizeof(efi_config_table_t) - + sizeof(struct ia64_sal_systab) - + sizeof(struct ia64_sal_desc_entry_point) - + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t)) - + 1024)] __attribute__ ((aligned (8))); - -#define SECS_PER_HOUR (60 * 60) -#define SECS_PER_DAY (SECS_PER_HOUR * 24) - -/* Compute the `struct tm' representation of *T, - offset OFFSET seconds east of UTC, - and store year, yday, mon, mday, wday, hour, min, sec into *TP. - Return nonzero if successful. */ -int -offtime (unsigned long t, efi_time_t *tp) -{ - const unsigned short int __mon_yday[2][13] = - { - /* Normal years. */ - { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 }, - /* Leap years. */ - { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 } - }; - long int days, rem, y; - const unsigned short int *ip; - - days = t / SECS_PER_DAY; - rem = t % SECS_PER_DAY; - while (rem < 0) { - rem += SECS_PER_DAY; - --days; - } - while (rem >= SECS_PER_DAY) { - rem -= SECS_PER_DAY; - ++days; - } - tp->hour = rem / SECS_PER_HOUR; - rem %= SECS_PER_HOUR; - tp->minute = rem / 60; - tp->second = rem % 60; - /* January 1, 1970 was a Thursday. */ - y = 1970; - -# define DIV(a, b) ((a) / (b) - ((a) % (b) < 0)) -# define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400)) -# define __isleap(year) \ - ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) - - while (days < 0 || days >= (__isleap (y) ? 366 : 365)) { - /* Guess a corrected year, assuming 365 days per year. */ - long int yg = y + days / 365 - (days % 365 < 0); - - /* Adjust DAYS and Y to match the guessed year. */ - days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1) - - LEAPS_THRU_END_OF (y - 1)); - y = yg; - } - tp->year = y; - ip = __mon_yday[__isleap(y)]; - for (y = 11; days < (long int) ip[y]; --y) - continue; - days -= ip[y]; - tp->month = y + 1; - tp->day = days + 1; - return 1; -} - -extern void pal_emulator_static (void); - -/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */ - -#define BUILD_CMD(addr) ((0x80000000 | (addr)) & ~3) - -#define REG_OFFSET(addr) (0x00000000000000FF & (addr)) -#define DEVICE_FUNCTION(addr) (0x000000000000FF00 & (addr)) -#define BUS_NUMBER(addr) (0x0000000000FF0000 & (addr)) - -static efi_status_t -fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc) -{ -#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) - struct { - int tv_sec; /* must be 32bits to work */ - int tv_usec; - } tv32bits; - - ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD); - - memset(tm, 0, sizeof(*tm)); - offtime(tv32bits.tv_sec, tm); - - if (tc) - memset(tc, 0, sizeof(*tc)); -#else -# error Not implemented yet... -#endif - return EFI_SUCCESS; -} - -static void -efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data) -{ -#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) - ssc(status, 0, 0, 0, SSC_EXIT); -#else -# error Not implemented yet... -#endif -} - -static efi_status_t -efi_unimplemented (void) -{ - return EFI_UNSUPPORTED; -} - -static struct sal_ret_values -sal_emulator (long index, unsigned long in1, unsigned long in2, - unsigned long in3, unsigned long in4, unsigned long in5, - unsigned long in6, unsigned long in7) -{ - long r9 = 0; - long r10 = 0; - long r11 = 0; - long status; - - /* - * Don't do a "switch" here since that gives us code that - * isn't self-relocatable. - */ - status = 0; - if (index == SAL_FREQ_BASE) { - if (in1 == SAL_FREQ_BASE_PLATFORM) - r9 = 200000000; - else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) { - /* - * Is this supposed to be the cr.itc frequency - * or something platform specific? The SAL - * doc ain't exactly clear on this... - */ - r9 = 700000000; - } else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK) - r9 = 1; - else - status = -1; - } else if (index == SAL_SET_VECTORS) { - ; - } else if (index == SAL_GET_STATE_INFO) { - ; - } else if (index == SAL_GET_STATE_INFO_SIZE) { - ; - } else if (index == SAL_CLEAR_STATE_INFO) { - ; - } else if (index == SAL_MC_RENDEZ) { - ; - } else if (index == SAL_MC_SET_PARAMS) { - ; - } else if (index == SAL_CACHE_FLUSH) { - ; - } else if (index == SAL_CACHE_INIT) { - ; -#ifdef CONFIG_PCI - } else if (index == SAL_PCI_CONFIG_READ) { - /* - * in1 contains the PCI configuration address and in2 - * the size of the read. The value that is read is - * returned via the general register r9. - */ - outl(BUILD_CMD(in1), 0xCF8); - if (in2 == 1) /* Reading byte */ - r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3))); - else if (in2 == 2) /* Reading word */ - r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2))); - else /* Reading dword */ - r9 = inl(0xCFC); - status = PCIBIOS_SUCCESSFUL; - } else if (index == SAL_PCI_CONFIG_WRITE) { - /* - * in1 contains the PCI configuration address, in2 the - * size of the write, and in3 the actual value to be - * written out. - */ - outl(BUILD_CMD(in1), 0xCF8); - if (in2 == 1) /* Writing byte */ - outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3))); - else if (in2 == 2) /* Writing word */ - outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2))); - else /* Writing dword */ - outl(in3, 0xCFC); - status = PCIBIOS_SUCCESSFUL; -#endif /* CONFIG_PCI */ - } else if (index == SAL_UPDATE_PAL) { - ; - } else { - status = -1; - } - return ((struct sal_ret_values) {status, r9, r10, r11}); -} - -struct ia64_boot_param * -sys_fw_init (const char *args, int arglen) -{ - efi_system_table_t *efi_systab; - efi_runtime_services_t *efi_runtime; - efi_config_table_t *efi_tables; - struct ia64_sal_systab *sal_systab; - efi_memory_desc_t *efi_memmap, *md; - unsigned long *pal_desc, *sal_desc; - struct ia64_sal_desc_entry_point *sal_ed; - struct ia64_boot_param *bp; - unsigned char checksum = 0; - char *cp, *cmd_line; - int i = 0; -# define MAKE_MD(typ, attr, start, end) \ - do { \ - md = efi_memmap + i++; \ - md->type = typ; \ - md->pad = 0; \ - md->phys_addr = start; \ - md->virt_addr = 0; \ - md->num_pages = (end - start) >> 12; \ - md->attribute = attr; \ - } while (0) - - memset(fw_mem, 0, sizeof(fw_mem)); - - pal_desc = (unsigned long *) &pal_emulator_static; - sal_desc = (unsigned long *) &sal_emulator; - - cp = fw_mem; - efi_systab = (void *) cp; cp += sizeof(*efi_systab); - efi_runtime = (void *) cp; cp += sizeof(*efi_runtime); - efi_tables = (void *) cp; cp += sizeof(*efi_tables); - sal_systab = (void *) cp; cp += sizeof(*sal_systab); - sal_ed = (void *) cp; cp += sizeof(*sal_ed); - efi_memmap = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap); - bp = (void *) cp; cp += sizeof(*bp); - cmd_line = (void *) cp; - - if (args) { - if (arglen >= 1024) - arglen = 1023; - memcpy(cmd_line, args, arglen); - } else { - arglen = 0; - } - cmd_line[arglen] = '\0'; - - memset(efi_systab, 0, sizeof(*efi_systab)); - efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE; - efi_systab->hdr.revision = ((1 << 16) | 00); - efi_systab->hdr.headersize = sizeof(efi_systab->hdr); - efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0"); - efi_systab->fw_revision = 1; - efi_systab->runtime = (void *) __pa(efi_runtime); - efi_systab->nr_tables = 1; - efi_systab->tables = __pa(efi_tables); - - efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE; - efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION; - efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr); - efi_runtime->get_time = (void *)__pa(&fw_efi_get_time); - efi_runtime->set_time = (void *)__pa(&efi_unimplemented); - efi_runtime->get_wakeup_time = (void *)__pa(&efi_unimplemented); - efi_runtime->set_wakeup_time = (void *)__pa(&efi_unimplemented); - efi_runtime->set_virtual_address_map = (void *)__pa(&efi_unimplemented); - efi_runtime->get_variable = (void *)__pa(&efi_unimplemented); - efi_runtime->get_next_variable = (void *)__pa(&efi_unimplemented); - efi_runtime->set_variable = (void *)__pa(&efi_unimplemented); - efi_runtime->get_next_high_mono_count = (void *)__pa(&efi_unimplemented); - efi_runtime->reset_system = (void *)__pa(&efi_reset_system); - - efi_tables->guid = SAL_SYSTEM_TABLE_GUID; - efi_tables->table = __pa(sal_systab); - - /* fill in the SAL system table: */ - memcpy(sal_systab->signature, "SST_", 4); - sal_systab->size = sizeof(*sal_systab); - sal_systab->sal_rev_minor = 1; - sal_systab->sal_rev_major = 0; - sal_systab->entry_count = 1; - -#ifdef CONFIG_IA64_GENERIC - strcpy(sal_systab->oem_id, "Generic"); - strcpy(sal_systab->product_id, "IA-64 system"); -#endif - -#ifdef CONFIG_IA64_HP_SIM - strcpy(sal_systab->oem_id, "Hewlett-Packard"); - strcpy(sal_systab->product_id, "HP-simulator"); -#endif - - /* fill in an entry point: */ - sal_ed->type = SAL_DESC_ENTRY_POINT; - sal_ed->pal_proc = __pa(pal_desc[0]); - sal_ed->sal_proc = __pa(sal_desc[0]); - sal_ed->gp = __pa(sal_desc[1]); - - for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp) - checksum += *cp; - - sal_systab->checksum = -checksum; - -#if SIMPLE_MEMMAP - /* simulate free memory at physical address zero */ - MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB); - MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB); - MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB); - MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB); -#else - MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000); - MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000); - MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000); - MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000); - MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000); - MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000); - MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000); - MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000); - MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000); - MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000); - MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000); - MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000); - MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000); - MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000); - MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000); - MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000); -#endif - - bp->efi_systab = __pa(&fw_mem); - bp->efi_memmap = __pa(efi_memmap); - bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t); - bp->efi_memdesc_size = sizeof(efi_memory_desc_t); - bp->efi_memdesc_version = 1; - bp->command_line = __pa(cmd_line); - bp->console_info.num_cols = 80; - bp->console_info.num_rows = 25; - bp->console_info.orig_x = 0; - bp->console_info.orig_y = 24; - bp->fpswa = 0; - - return bp; -} diff --git a/arch/ia64/hp/sim/boot/ssc.h b/arch/ia64/hp/sim/boot/ssc.h deleted file mode 100644 index 88752c7509e0..000000000000 --- a/arch/ia64/hp/sim/boot/ssc.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 1998-2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Stephane Eranian <eranian@hpl.hp.com> - */ -#ifndef ssc_h -#define ssc_h - -/* Simulator system calls: */ - -#define SSC_CONSOLE_INIT 20 -#define SSC_GETCHAR 21 -#define SSC_PUTCHAR 31 -#define SSC_OPEN 50 -#define SSC_CLOSE 51 -#define SSC_READ 52 -#define SSC_WRITE 53 -#define SSC_GET_COMPLETION 54 -#define SSC_WAIT_COMPLETION 55 -#define SSC_CONNECT_INTERRUPT 58 -#define SSC_GENERATE_INTERRUPT 59 -#define SSC_SET_PERIODIC_INTERRUPT 60 -#define SSC_GET_RTC 65 -#define SSC_EXIT 66 -#define SSC_LOAD_SYMBOLS 69 -#define SSC_GET_TOD 74 - -#define SSC_GET_ARGS 75 - -/* - * Simulator system call. - */ -extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr); - -#endif /* ssc_h */ diff --git a/arch/ia64/hp/sim/hpsim.S b/arch/ia64/hp/sim/hpsim.S deleted file mode 100644 index 44b4d53e1689..000000000000 --- a/arch/ia64/hp/sim/hpsim.S +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/asmmacro.h> - -/* - * Simulator system call. - */ -GLOBAL_ENTRY(ia64_ssc) - mov r15=r36 - break 0x80001 - br.ret.sptk.many rp -END(ia64_ssc) diff --git a/arch/ia64/hp/sim/hpsim_console.c b/arch/ia64/hp/sim/hpsim_console.c deleted file mode 100644 index bffd9f67a8a1..000000000000 --- a/arch/ia64/hp/sim/hpsim_console.c +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Platform dependent support for HP simulator. - * - * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/tty.h> -#include <linux/kdev_t.h> -#include <linux/console.h> - -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/pal.h> -#include <asm/machvec.h> -#include <asm/pgtable.h> -#include <asm/sal.h> -#include <asm/hpsim.h> - -#include "hpsim_ssc.h" - -static int simcons_init (struct console *, char *); -static void simcons_write (struct console *, const char *, unsigned); -static struct tty_driver *simcons_console_device (struct console *, int *); - -static struct console hpsim_cons = { - .name = "simcons", - .write = simcons_write, - .device = simcons_console_device, - .setup = simcons_init, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int -simcons_init (struct console *cons, char *options) -{ - return 0; -} - -static void -simcons_write (struct console *cons, const char *buf, unsigned count) -{ - unsigned long ch; - - while (count-- > 0) { - ch = *buf++; - ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR); - if (ch == '\n') - ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR); - } -} - -static struct tty_driver *simcons_console_device (struct console *c, int *index) -{ - *index = c->index; - return hp_simserial_driver; -} - -int simcons_register(void) -{ - if (!ia64_platform_is("hpsim")) - return 1; - - if (hpsim_cons.flags & CON_ENABLED) - return 1; - - register_console(&hpsim_cons); - return 0; -} diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c deleted file mode 100644 index 2f1cc59650ab..000000000000 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Platform dependent support for HP simulator. - * - * Copyright (C) 1998-2001 Hewlett-Packard Co - * Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/irq.h> - -#include "hpsim_ssc.h" - -static unsigned int -hpsim_irq_startup(struct irq_data *data) -{ - return 0; -} - -static void -hpsim_irq_noop(struct irq_data *data) -{ -} - -static int -hpsim_set_affinity_noop(struct irq_data *d, const struct cpumask *b, bool f) -{ - return 0; -} - -static struct irq_chip irq_type_hp_sim = { - .name = "hpsim", - .irq_startup = hpsim_irq_startup, - .irq_shutdown = hpsim_irq_noop, - .irq_enable = hpsim_irq_noop, - .irq_disable = hpsim_irq_noop, - .irq_ack = hpsim_irq_noop, - .irq_set_affinity = hpsim_set_affinity_noop, -}; - -static void hpsim_irq_set_chip(int irq) -{ - struct irq_chip *chip = irq_get_chip(irq); - - if (chip == &no_irq_chip) - irq_set_chip(irq, &irq_type_hp_sim); -} - -static void hpsim_connect_irq(int intr, int irq) -{ - ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT); -} - -int hpsim_get_irq(int intr) -{ - int irq = assign_irq_vector(AUTO_ASSIGN); - - if (irq >= 0) { - hpsim_irq_set_chip(irq); - irq_set_handler(irq, handle_simple_irq); - hpsim_connect_irq(intr, irq); - } - - return irq; -} - -void __init -hpsim_irq_init (void) -{ - int i; - - for_each_active_irq(i) - hpsim_irq_set_chip(i); -} diff --git a/arch/ia64/hp/sim/hpsim_machvec.c b/arch/ia64/hp/sim/hpsim_machvec.c deleted file mode 100644 index c21419359185..000000000000 --- a/arch/ia64/hp/sim/hpsim_machvec.c +++ /dev/null @@ -1,3 +0,0 @@ -#define MACHVEC_PLATFORM_NAME hpsim -#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpsim.h> -#include <asm/machvec_init.h> diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c deleted file mode 100644 index 41d21d51dc4d..000000000000 --- a/arch/ia64/hp/sim/hpsim_setup.c +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Platform dependent support for HP simulator. - * - * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> - */ -#include <linux/console.h> -#include <linux/init.h> -#include <linux/kdev_t.h> -#include <linux/kernel.h> -#include <linux/major.h> -#include <linux/param.h> -#include <linux/root_dev.h> -#include <linux/string.h> -#include <linux/types.h> - -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/pal.h> -#include <asm/machvec.h> -#include <asm/pgtable.h> -#include <asm/sal.h> -#include <asm/hpsim.h> - -#include "hpsim_ssc.h" - -void -ia64_ctl_trace (long on) -{ - ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE); -} - -void __init -hpsim_setup (char **cmdline_p) -{ - ROOT_DEV = Root_SDA1; /* default to first SCSI drive */ - - simcons_register(); -} diff --git a/arch/ia64/hp/sim/hpsim_ssc.h b/arch/ia64/hp/sim/hpsim_ssc.h deleted file mode 100644 index 6fd97a487811..000000000000 --- a/arch/ia64/hp/sim/hpsim_ssc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Platform dependent support for HP simulator. - * - * Copyright (C) 1998, 1999 Hewlett-Packard Co - * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com> - * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> - */ -#ifndef _IA64_PLATFORM_HPSIM_SSC_H -#define _IA64_PLATFORM_HPSIM_SSC_H - -/* Simulator system calls: */ - -#define SSC_CONSOLE_INIT 20 -#define SSC_GETCHAR 21 -#define SSC_PUTCHAR 31 -#define SSC_CONNECT_INTERRUPT 58 -#define SSC_GENERATE_INTERRUPT 59 -#define SSC_SET_PERIODIC_INTERRUPT 60 -#define SSC_GET_RTC 65 -#define SSC_EXIT 66 -#define SSC_LOAD_SYMBOLS 69 -#define SSC_GET_TOD 74 -#define SSC_CTL_TRACE 76 - -#define SSC_NETDEV_PROBE 100 -#define SSC_NETDEV_SEND 101 -#define SSC_NETDEV_RECV 102 -#define SSC_NETDEV_ATTACH 103 -#define SSC_NETDEV_DETACH 104 - -/* - * Simulator system call. - */ -extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); - -#endif /* _IA64_PLATFORM_HPSIM_SSC_H */ diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c deleted file mode 100644 index f39ef2b4ed72..000000000000 --- a/arch/ia64/hp/sim/simeth.c +++ /dev/null @@ -1,510 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Simulated Ethernet Driver - * - * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co - * Stephane Eranian <eranian@hpl.hp.com> - */ -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/inetdevice.h> -#include <linux/if_ether.h> -#include <linux/if_arp.h> -#include <linux/skbuff.h> -#include <linux/notifier.h> -#include <linux/bitops.h> -#include <asm/irq.h> -#include <asm/hpsim.h> - -#include "hpsim_ssc.h" - -#define SIMETH_RECV_MAX 10 - -/* - * Maximum possible received frame for Ethernet. - * We preallocate an sk_buff of that size to avoid costly - * memcpy for temporary buffer into sk_buff. We do basically - * what's done in other drivers, like eepro with a ring. - * The difference is, of course, that we don't have real DMA !!! - */ -#define SIMETH_FRAME_SIZE ETH_FRAME_LEN - - -#define NETWORK_INTR 8 - -struct simeth_local { - struct net_device_stats stats; - int simfd; /* descriptor in the simulator */ -}; - -static int simeth_probe1(void); -static int simeth_open(struct net_device *dev); -static int simeth_close(struct net_device *dev); -static int simeth_tx(struct sk_buff *skb, struct net_device *dev); -static int simeth_rx(struct net_device *dev); -static struct net_device_stats *simeth_get_stats(struct net_device *dev); -static irqreturn_t simeth_interrupt(int irq, void *dev_id); -static void set_multicast_list(struct net_device *dev); -static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr); - -static char *simeth_version="0.3"; - -/* - * This variable is used to establish a mapping between the Linux/ia64 kernel - * and the host linux kernel. - * - * As of today, we support only one card, even though most of the code - * is ready for many more. The mapping is then: - * linux/ia64 -> linux/x86 - * eth0 -> eth1 - * - * In the future, we some string operations, we could easily support up - * to 10 cards (0-9). - * - * The default mapping can be changed on the kernel command line by - * specifying simeth=ethX (or whatever string you want). - */ -static char *simeth_device="eth0"; /* default host interface to use */ - - - -static volatile unsigned int card_count; /* how many cards "found" so far */ -static int simeth_debug; /* set to 1 to get debug information */ - -/* - * Used to catch IFF_UP & IFF_DOWN events - */ -static struct notifier_block simeth_dev_notifier = { - simeth_device_event, - NULL -}; - - -/* - * Function used when using a kernel command line option. - * - * Format: simeth=interface_name (like eth0) - */ -static int __init -simeth_setup(char *str) -{ - simeth_device = str; - return 1; -} - -__setup("simeth=", simeth_setup); - -/* - * Function used to probe for simeth devices when not installed - * as a loadable module - */ - -int __init -simeth_probe (void) -{ - int r; - - printk(KERN_INFO "simeth: v%s\n", simeth_version); - - r = simeth_probe1(); - - if (r == 0) register_netdevice_notifier(&simeth_dev_notifier); - - return r; -} - -static inline int -netdev_probe(char *name, unsigned char *ether) -{ - return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE); -} - - -static inline int -netdev_attach(int fd, int irq, unsigned int ipaddr) -{ - /* this puts the host interface in the right mode (start interrupting) */ - return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH); -} - - -static inline int -netdev_detach(int fd) -{ - /* - * inactivate the host interface (don't interrupt anymore) */ - return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH); -} - -static inline int -netdev_send(int fd, unsigned char *buf, unsigned int len) -{ - return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND); -} - -static inline int -netdev_read(int fd, unsigned char *buf, unsigned int len) -{ - return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV); -} - -static const struct net_device_ops simeth_netdev_ops = { - .ndo_open = simeth_open, - .ndo_stop = simeth_close, - .ndo_start_xmit = simeth_tx, - .ndo_get_stats = simeth_get_stats, - .ndo_set_rx_mode = set_multicast_list, /* not yet used */ - -}; - -/* - * Function shared with module code, so cannot be in init section - * - * So far this function "detects" only one card (test_&_set) but could - * be extended easily. - * - * Return: - * - -ENODEV is no device found - * - -ENOMEM is no more memory - * - 0 otherwise - */ -static int -simeth_probe1(void) -{ - unsigned char mac_addr[ETH_ALEN]; - struct simeth_local *local; - struct net_device *dev; - int fd, err, rc; - - /* - * XXX Fix me - * let's support just one card for now - */ - if (test_and_set_bit(0, &card_count)) - return -ENODEV; - - /* - * check with the simulator for the device - */ - fd = netdev_probe(simeth_device, mac_addr); - if (fd == -1) - return -ENODEV; - - dev = alloc_etherdev(sizeof(struct simeth_local)); - if (!dev) - return -ENOMEM; - - memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr)); - - local = netdev_priv(dev); - local->simfd = fd; /* keep track of underlying file descriptor */ - - dev->netdev_ops = &simeth_netdev_ops; - - err = register_netdev(dev); - if (err) { - free_netdev(dev); - return err; - } - - /* - * attach the interrupt in the simulator, this does enable interrupts - * until a netdev_attach() is called - */ - if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0) - panic("%s: out of interrupt vectors!\n", __func__); - dev->irq = rc; - - printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr=%pm, IRQ %d\n", - dev->name, simeth_device, local->simfd, dev->dev_addr, dev->irq); - - return 0; -} - -/* - * actually binds the device to an interrupt vector - */ -static int -simeth_open(struct net_device *dev) -{ - if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) { - printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq); - return -EAGAIN; - } - - netif_start_queue(dev); - - return 0; -} - -/* copied from lapbether.c */ -static __inline__ int dev_is_ethdev(struct net_device *dev) -{ - return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5)); -} - - -/* - * Handler for IFF_UP or IFF_DOWN - * - * The reason for that is that we don't want to be interrupted when the - * interface is down. There is no way to unconnect in the simualtor. Instead - * we use this function to shutdown packet processing in the frame filter - * in the simulator. Thus no interrupts are generated - * - * - * That's also the place where we pass the IP address of this device to the - * simulator so that that we can start filtering packets for it - * - * There may be a better way of doing this, but I don't know which yet. - */ -static int -simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr) -{ - struct net_device *dev = netdev_notifier_info_to_dev(ptr); - struct simeth_local *local; - struct in_device *in_dev; - struct in_ifaddr **ifap = NULL; - struct in_ifaddr *ifa = NULL; - int r; - - - if ( ! dev ) { - printk(KERN_WARNING "simeth_device_event dev=0\n"); - return NOTIFY_DONE; - } - - if (dev_net(dev) != &init_net) - return NOTIFY_DONE; - - if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE; - - /* - * Check whether or not it's for an ethernet device - * - * XXX Fixme: This works only as long as we support one - * type of ethernet device. - */ - if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE; - - if ((in_dev=dev->ip_ptr) != NULL) { - for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next) - if (strcmp(dev->name, ifa->ifa_label) == 0) break; - } - if ( ifa == NULL ) { - printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name); - return NOTIFY_DONE; - } - - printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n", - dev->name, ntohl(ifa->ifa_local)); - - /* - * XXX Fix me - * if the device was up, and we're simply reconfiguring it, not sure - * we get DOWN then UP. - */ - - local = netdev_priv(dev); - /* now do it for real */ - r = event == NETDEV_UP ? - netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)): - netdev_detach(local->simfd); - - printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n", - event == NETDEV_UP ? "attach":"detach", r); - - return NOTIFY_DONE; -} - -static int -simeth_close(struct net_device *dev) -{ - netif_stop_queue(dev); - - free_irq(dev->irq, dev); - - return 0; -} - -/* - * Only used for debug - */ -static void -frame_print(unsigned char *from, unsigned char *frame, int len) -{ - int i; - - printk("%s: (%d) %02x", from, len, frame[0] & 0xff); - for(i=1; i < 6; i++ ) { - printk(":%02x", frame[i] &0xff); - } - printk(" %2x", frame[6] &0xff); - for(i=7; i < 12; i++ ) { - printk(":%02x", frame[i] &0xff); - } - printk(" [%02x%02x]\n", frame[12], frame[13]); - - for(i=14; i < len; i++ ) { - printk("%02x ", frame[i] &0xff); - if ( (i%10)==0) printk("\n"); - } - printk("\n"); -} - - -/* - * Function used to transmit of frame, very last one on the path before - * going to the simulator. - */ -static int -simeth_tx(struct sk_buff *skb, struct net_device *dev) -{ - struct simeth_local *local = netdev_priv(dev); - -#if 0 - /* ensure we have at least ETH_ZLEN bytes (min frame size) */ - unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - /* Where do the extra padding bytes comes from inthe skbuff ? */ -#else - /* the real driver in the host system is going to take care of that - * or maybe it's the NIC itself. - */ - unsigned int length = skb->len; -#endif - - local->stats.tx_bytes += skb->len; - local->stats.tx_packets++; - - - if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length); - - netdev_send(local->simfd, skb->data, length); - - /* - * we are synchronous on write, so we don't simulate a - * trasnmit complete interrupt, thus we don't need to arm a tx - */ - - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -static inline struct sk_buff * -make_new_skb(struct net_device *dev) -{ - struct sk_buff *nskb; - - /* - * The +2 is used to make sure that the IP header is nicely - * aligned (on 4byte boundary I assume 14+2=16) - */ - nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2); - if ( nskb == NULL ) { - printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); - return NULL; - } - - skb_reserve(nskb, 2); /* Align IP on 16 byte boundaries */ - - skb_put(nskb,SIMETH_FRAME_SIZE); - - return nskb; -} - -/* - * called from interrupt handler to process a received frame - */ -static int -simeth_rx(struct net_device *dev) -{ - struct simeth_local *local; - struct sk_buff *skb; - int len; - int rcv_count = SIMETH_RECV_MAX; - - local = netdev_priv(dev); - /* - * the loop concept has been borrowed from other drivers - * looks to me like it's a throttling thing to avoid pushing to many - * packets at one time into the stack. Making sure we can process them - * upstream and make forward progress overall - */ - do { - if ( (skb=make_new_skb(dev)) == NULL ) { - printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); - local->stats.rx_dropped++; - return 0; - } - /* - * Read only one frame at a time - */ - len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE); - if ( len == 0 ) { - if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n", - dev->name, SIMETH_RECV_MAX-rcv_count); - break; - } -#if 0 - /* - * XXX Fix me - * Should really do a csum+copy here - */ - skb_copy_to_linear_data(skb, frame, len); -#endif - skb->protocol = eth_type_trans(skb, dev); - - if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len); - - /* - * push the packet up & trigger software interrupt - */ - netif_rx(skb); - - local->stats.rx_packets++; - local->stats.rx_bytes += len; - - } while ( --rcv_count ); - - return len; /* 0 = nothing left to read, otherwise, we can try again */ -} - -/* - * Interrupt handler (Yes, we can do it too !!!) - */ -static irqreturn_t -simeth_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - - /* - * very simple loop because we get interrupts only when receiving - */ - while (simeth_rx(dev)); - return IRQ_HANDLED; -} - -static struct net_device_stats * -simeth_get_stats(struct net_device *dev) -{ - struct simeth_local *local = netdev_priv(dev); - - return &local->stats; -} - -/* fake multicast ability */ -static void -set_multicast_list(struct net_device *dev) -{ - printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name); -} - -__initcall(simeth_probe); diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c deleted file mode 100644 index 0a8a74271173..000000000000 --- a/arch/ia64/hp/sim/simscsi.c +++ /dev/null @@ -1,373 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Simulated SCSI driver. - * - * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Stephane Eranian <eranian@hpl.hp.com> - * - * 02/01/15 David Mosberger Updated for v2.5.1 - * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 - */ -#include <linux/blkdev.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <asm/irq.h> -#include "hpsim_ssc.h" - -#include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_host.h> - -#define DEBUG_SIMSCSI 0 - -#define SIMSCSI_REQ_QUEUE_LEN 64 -#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd" - -/* Simulator system calls: */ - -#define SSC_OPEN 50 -#define SSC_CLOSE 51 -#define SSC_READ 52 -#define SSC_WRITE 53 -#define SSC_GET_COMPLETION 54 -#define SSC_WAIT_COMPLETION 55 - -#define SSC_WRITE_ACCESS 2 -#define SSC_READ_ACCESS 1 - -#if DEBUG_SIMSCSI - int simscsi_debug; -# define DBG simscsi_debug -#else -# define DBG 0 -#endif - -static struct Scsi_Host *host; - -static void simscsi_interrupt (unsigned long val); -static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); - -struct disk_req { - unsigned long addr; - unsigned len; -}; - -struct disk_stat { - int fd; - unsigned count; -}; - -static int desc[16] = { - -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 -}; - -static struct queue_entry { - struct scsi_cmnd *sc; -} queue[SIMSCSI_REQ_QUEUE_LEN]; - -static int rd, wr; -static atomic_t num_reqs = ATOMIC_INIT(0); - -/* base name for default disks */ -static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; - -#define MAX_ROOT_LEN 128 - -/* - * used to setup a new base for disk images - * to use /foo/bar/disk[a-z] as disk images - * you have to specify simscsi=/foo/bar/disk on the command line - */ -static int __init -simscsi_setup (char *s) -{ - /* XXX Fix me we may need to strcpy() ? */ - if (strlen(s) > MAX_ROOT_LEN) { - printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", - simscsi_root); - } else - simscsi_root = s; - return 1; -} - -__setup("simscsi=", simscsi_setup); - -static void -simscsi_interrupt (unsigned long val) -{ - struct scsi_cmnd *sc; - - while ((sc = queue[rd].sc) != NULL) { - atomic_dec(&num_reqs); - queue[rd].sc = NULL; - if (DBG) - printk("simscsi_interrupt: done with %u\n", - sc->request->tag); - (*sc->scsi_done)(sc); - rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; - } -} - -static int -simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, - sector_t capacity, int ip[]) -{ - ip[0] = 64; /* heads */ - ip[1] = 32; /* sectors */ - ip[2] = capacity >> 11; /* cylinders */ - return 0; -} - -static void -simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) -{ - int i; - struct scatterlist *sl; - struct disk_stat stat; - struct disk_req req; - - stat.fd = desc[sc->device->id]; - - scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) { - req.addr = __pa(sg_virt(sl)); - req.len = sl->length; - if (DBG) - printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", - mode == SSC_READ ? "read":"write", req.addr, offset, - scsi_sg_count(sc) - i, sl->length); - ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); - ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); - - /* should not happen in our case */ - if (stat.count != req.len) { - sc->result = DID_ERROR << 16; - return; - } - offset += sl->length; - } - sc->result = GOOD; -} - -/* - * function handling both READ_6/WRITE_6 (non-scatter/gather mode) - * commands. - * Added 02/26/99 S.Eranian - */ -static void -simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) -{ - unsigned long offset; - - offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; - simscsi_sg_readwrite(sc, mode, offset); -} - -static size_t -simscsi_get_disk_size (int fd) -{ - struct disk_stat stat; - size_t bit, sectors = 0; - struct disk_req req; - char buf[512]; - - /* - * This is a bit kludgey: the simulator doesn't provide a - * direct way of determining the disk size, so we do a binary - * search, assuming a maximum disk size of 128GB. - */ - for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { - req.addr = __pa(&buf); - req.len = sizeof(buf); - ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); - stat.fd = fd; - ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); - if (stat.count == sizeof(buf)) - sectors |= bit; - } - return sectors - 1; /* return last valid sector number */ -} - -static void -simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) -{ - unsigned long offset; - - offset = (((unsigned long)sc->cmnd[2] << 24) - | ((unsigned long)sc->cmnd[3] << 16) - | ((unsigned long)sc->cmnd[4] << 8) - | ((unsigned long)sc->cmnd[5] << 0))*512UL; - simscsi_sg_readwrite(sc, mode, offset); -} - -static int -simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) -{ - unsigned int target_id = sc->device->id; - char fname[MAX_ROOT_LEN+16]; - size_t disk_size; - char *buf; - char localbuf[36]; -#if DEBUG_SIMSCSI - register long sp asm ("sp"); - - if (DBG) - printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%u,sp=%lx,done=%p\n", - target_id, sc->cmnd[0], sc->request->tag, sp, done); -#endif - - sc->result = DID_BAD_TARGET << 16; - sc->scsi_done = done; - if (target_id <= 15 && sc->device->lun == 0) { - switch (sc->cmnd[0]) { - case INQUIRY: - if (scsi_bufflen(sc) < 35) { - break; - } - sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); - desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, - 0, 0, SSC_OPEN); - if (desc[target_id] < 0) { - /* disk doesn't exist... */ - break; - } - buf = localbuf; - buf[0] = 0; /* magnetic disk */ - buf[1] = 0; /* not a removable medium */ - buf[2] = 2; /* SCSI-2 compliant device */ - buf[3] = 2; /* SCSI-2 response data format */ - buf[4] = 31; /* additional length (bytes) */ - buf[5] = 0; /* reserved */ - buf[6] = 0; /* reserved */ - buf[7] = 0; /* various flags */ - memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); - scsi_sg_copy_from_buffer(sc, buf, 36); - sc->result = GOOD; - break; - - case TEST_UNIT_READY: - sc->result = GOOD; - break; - - case READ_6: - if (desc[target_id] < 0 ) - break; - simscsi_readwrite6(sc, SSC_READ); - break; - - case READ_10: - if (desc[target_id] < 0 ) - break; - simscsi_readwrite10(sc, SSC_READ); - break; - - case WRITE_6: - if (desc[target_id] < 0) - break; - simscsi_readwrite6(sc, SSC_WRITE); - break; - - case WRITE_10: - if (desc[target_id] < 0) - break; - simscsi_readwrite10(sc, SSC_WRITE); - break; - - case READ_CAPACITY: - if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) { - break; - } - buf = localbuf; - disk_size = simscsi_get_disk_size(desc[target_id]); - - buf[0] = (disk_size >> 24) & 0xff; - buf[1] = (disk_size >> 16) & 0xff; - buf[2] = (disk_size >> 8) & 0xff; - buf[3] = (disk_size >> 0) & 0xff; - /* set block size of 512 bytes: */ - buf[4] = 0; - buf[5] = 0; - buf[6] = 2; - buf[7] = 0; - scsi_sg_copy_from_buffer(sc, buf, 8); - sc->result = GOOD; - break; - - case MODE_SENSE: - case MODE_SENSE_10: - /* sd.c uses this to determine whether disk does write-caching. */ - scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page, - PAGE_SIZE); - sc->result = GOOD; - break; - - case START_STOP: - printk(KERN_ERR "START_STOP\n"); - break; - - default: - panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); - } - } - if (sc->result == DID_BAD_TARGET) { - sc->result |= DRIVER_SENSE << 24; - sc->sense_buffer[0] = 0x70; - sc->sense_buffer[2] = 0x00; - } - if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { - panic("Attempt to queue command while command is pending!!"); - } - atomic_inc(&num_reqs); - queue[wr].sc = sc; - wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; - - tasklet_schedule(&simscsi_tasklet); - return 0; -} - -static DEF_SCSI_QCMD(simscsi_queuecommand) - -static int -simscsi_host_reset (struct scsi_cmnd *sc) -{ - printk(KERN_ERR "simscsi_host_reset: not implemented\n"); - return 0; -} - -static struct scsi_host_template driver_template = { - .name = "simulated SCSI host adapter", - .proc_name = "simscsi", - .queuecommand = simscsi_queuecommand, - .eh_host_reset_handler = simscsi_host_reset, - .bios_param = simscsi_biosparam, - .can_queue = SIMSCSI_REQ_QUEUE_LEN, - .this_id = -1, - .sg_tablesize = SG_ALL, - .max_sectors = 1024, - .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, - .dma_boundary = PAGE_SIZE - 1, -}; - -static int __init -simscsi_init(void) -{ - int error; - - host = scsi_host_alloc(&driver_template, 0); - if (!host) - return -ENOMEM; - - error = scsi_add_host(host, NULL); - if (error) - goto free_host; - scsi_scan_host(host); - return 0; - - free_host: - scsi_host_put(host); - return error; -} -device_initcall(simscsi_init); diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c deleted file mode 100644 index 1a338e541334..000000000000 --- a/arch/ia64/hp/sim/simserial.c +++ /dev/null @@ -1,521 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Simulated Serial Driver (fake serial) - * - * This driver is mostly used for bringup purposes and will go away. - * It has a strong dependency on the system console. All outputs - * are rerouted to the same facility as the one used by printk which, in our - * case means sys_sim.c console (goes via the simulator). - * - * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co - * Stephane Eranian <eranian@hpl.hp.com> - * David Mosberger-Tang <davidm@hpl.hp.com> - */ - -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/capability.h> -#include <linux/circ_buf.h> -#include <linux/console.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/serial.h> -#include <linux/sysrq.h> -#include <linux/uaccess.h> - -#include <asm/hpsim.h> - -#include "hpsim_ssc.h" - -#undef SIMSERIAL_DEBUG /* define this to get some debug information */ - -#define KEYBOARD_INTR 3 /* must match with simulator! */ - -#define NR_PORTS 1 /* only one port for now */ - -struct serial_state { - struct tty_port port; - struct circ_buf xmit; - int irq; - int x_char; -}; - -static struct serial_state rs_table[NR_PORTS]; - -struct tty_driver *hp_simserial_driver; - -static struct console *console; - -static void receive_chars(struct tty_port *port) -{ - unsigned char ch; - static unsigned char seen_esc = 0; - - while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) { - if (ch == 27 && seen_esc == 0) { - seen_esc = 1; - continue; - } else if (seen_esc == 1 && ch == 'O') { - seen_esc = 2; - continue; - } else if (seen_esc == 2) { - if (ch == 'P') /* F1 */ - show_state(); -#ifdef CONFIG_MAGIC_SYSRQ - if (ch == 'S') { /* F4 */ - do { - ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR); - } while (!ch); - handle_sysrq(ch); - } -#endif - seen_esc = 0; - continue; - } - seen_esc = 0; - - if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0) - break; - } - tty_flip_buffer_push(port); -} - -/* - * This is the serial driver's interrupt routine for a single port - */ -static irqreturn_t rs_interrupt_single(int irq, void *dev_id) -{ - struct serial_state *info = dev_id; - - receive_chars(&info->port); - - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -static int rs_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct serial_state *info = tty->driver_data; - unsigned long flags; - - if (!info->xmit.buf) - return 0; - - local_irq_save(flags); - if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) { - local_irq_restore(flags); - return 0; - } - info->xmit.buf[info->xmit.head] = ch; - info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1); - local_irq_restore(flags); - return 1; -} - -static void transmit_chars(struct tty_struct *tty, struct serial_state *info, - int *intr_done) -{ - int count; - unsigned long flags; - - local_irq_save(flags); - - if (info->x_char) { - char c = info->x_char; - - console->write(console, &c, 1); - - info->x_char = 0; - - goto out; - } - - if (info->xmit.head == info->xmit.tail || tty->stopped) { -#ifdef SIMSERIAL_DEBUG - printk("transmit_chars: head=%d, tail=%d, stopped=%d\n", - info->xmit.head, info->xmit.tail, tty->stopped); -#endif - goto out; - } - /* - * We removed the loop and try to do it in to chunks. We need - * 2 operations maximum because it's a ring buffer. - * - * First from current to tail if possible. - * Then from the beginning of the buffer until necessary - */ - - count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE), - SERIAL_XMIT_SIZE - info->xmit.tail); - console->write(console, info->xmit.buf+info->xmit.tail, count); - - info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1); - - /* - * We have more at the beginning of the buffer - */ - count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (count) { - console->write(console, info->xmit.buf, count); - info->xmit.tail += count; - } -out: - local_irq_restore(flags); -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct serial_state *info = tty->driver_data; - - if (info->xmit.head == info->xmit.tail || tty->stopped || - !info->xmit.buf) - return; - - transmit_chars(tty, info, NULL); -} - -static int rs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - struct serial_state *info = tty->driver_data; - int c, ret = 0; - unsigned long flags; - - if (!info->xmit.buf) - return 0; - - local_irq_save(flags); - while (1) { - c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) { - break; - } - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = ((info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1)); - buf += c; - count -= c; - ret += c; - } - local_irq_restore(flags); - /* - * Hey, we transmit directly from here in our case - */ - if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) && - !tty->stopped) - transmit_chars(tty, info, NULL); - - return ret; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct serial_state *info = tty->driver_data; - - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct serial_state *info = tty->driver_data; - - return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct serial_state *info = tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; - local_irq_restore(flags); - - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void rs_send_xchar(struct tty_struct *tty, char ch) -{ - struct serial_state *info = tty->driver_data; - - info->x_char = ch; - if (ch) { - /* - * I guess we could call console->write() directly but - * let's do that for now. - */ - transmit_chars(tty, info, NULL); - } -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct * tty) -{ - if (I_IXOFF(tty)) - rs_send_xchar(tty, STOP_CHAR(tty)); - - printk(KERN_INFO "simrs_throttle called\n"); -} - -static void rs_unthrottle(struct tty_struct * tty) -{ - struct serial_state *info = tty->driver_data; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_send_xchar(tty, START_CHAR(tty)); - } - printk(KERN_INFO "simrs_unthrottle called\n"); -} - -static int rs_setserial(struct tty_struct *tty, struct serial_struct *ss) -{ - return 0; -} - -static int rs_getserial(struct tty_struct *tty, struct serial_struct *ss) -{ - return 0; -} - -static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) -{ - if ((cmd != TIOCSERCONFIG) && (cmd != TIOCMIWAIT)) { - if (tty_io_error(tty)) - return -EIO; - } - - switch (cmd) { - case TIOCMIWAIT: - return 0; - case TIOCSERCONFIG: - case TIOCSERGETLSR: /* Get line status register */ - return -EINVAL; - } - return -ENOIOCTLCMD; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct tty_port *port) -{ - struct serial_state *info = container_of(port, struct serial_state, - port); - unsigned long flags; - - local_irq_save(flags); - if (info->irq) - free_irq(info->irq, info); - - if (info->xmit.buf) { - free_page((unsigned long) info->xmit.buf); - info->xmit.buf = NULL; - } - local_irq_restore(flags); -} - -static void rs_close(struct tty_struct *tty, struct file * filp) -{ - struct serial_state *info = tty->driver_data; - - tty_port_close(&info->port, tty, filp); -} - -static void rs_hangup(struct tty_struct *tty) -{ - struct serial_state *info = tty->driver_data; - - rs_flush_buffer(tty); - tty_port_hangup(&info->port); -} - -static int activate(struct tty_port *port, struct tty_struct *tty) -{ - struct serial_state *state = container_of(port, struct serial_state, - port); - unsigned long flags, page; - int retval = 0; - - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - local_irq_save(flags); - - if (state->xmit.buf) - free_page(page); - else - state->xmit.buf = (unsigned char *) page; - - if (state->irq) { - retval = request_irq(state->irq, rs_interrupt_single, 0, - "simserial", state); - if (retval) - goto errout; - } - - state->xmit.head = state->xmit.tail = 0; -errout: - local_irq_restore(flags); - return retval; -} - - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_open(struct tty_struct *tty, struct file * filp) -{ - struct serial_state *info = rs_table + tty->index; - struct tty_port *port = &info->port; - - tty->driver_data = info; - port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - /* - * figure out which console to use (should be one already) - */ - console = console_drivers; - while (console) { - if ((console->flags & CON_ENABLED) && console->write) break; - console = console->next; - } - - return tty_port_open(port, tty, filp); -} - -/* - * /proc fs routines.... - */ - -static int rs_proc_show(struct seq_file *m, void *v) -{ - int i; - - seq_printf(m, "simserinfo:1.0\n"); - for (i = 0; i < NR_PORTS; i++) - seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n", - i, rs_table[i].irq); - return 0; -} - -static const struct tty_operations hp_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .put_char = rs_put_char, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .send_xchar = rs_send_xchar, - .set_serial = rs_setserial, - .get_serial = rs_getserial, - .hangup = rs_hangup, - .proc_show = rs_proc_show, -}; - -static const struct tty_port_operations hp_port_ops = { - .activate = activate, - .shutdown = shutdown, -}; - -static int __init simrs_init(void) -{ - struct serial_state *state; - int retval; - - if (!ia64_platform_is("hpsim")) - return -ENODEV; - - hp_simserial_driver = alloc_tty_driver(NR_PORTS); - if (!hp_simserial_driver) - return -ENOMEM; - - printk(KERN_INFO "SimSerial driver with no serial options enabled\n"); - - /* Initialize the tty_driver structure */ - - hp_simserial_driver->driver_name = "simserial"; - hp_simserial_driver->name = "ttyS"; - hp_simserial_driver->major = TTY_MAJOR; - hp_simserial_driver->minor_start = 64; - hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL; - hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL; - hp_simserial_driver->init_termios = tty_std_termios; - hp_simserial_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(hp_simserial_driver, &hp_ops); - - state = rs_table; - tty_port_init(&state->port); - state->port.ops = &hp_port_ops; - state->port.close_delay = 0; /* XXX really 0? */ - - retval = hpsim_get_irq(KEYBOARD_INTR); - if (retval < 0) { - printk(KERN_ERR "%s: out of interrupt vectors!\n", - __func__); - goto err_free_tty; - } - - state->irq = retval; - - /* the port is imaginary */ - printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq); - - tty_port_link_device(&state->port, hp_simserial_driver, 0); - retval = tty_register_driver(hp_simserial_driver); - if (retval) { - printk(KERN_ERR "Couldn't register simserial driver\n"); - goto err_free_tty; - } - - return 0; -err_free_tty: - put_tty_driver(hp_simserial_driver); - tty_port_destroy(&state->port); - return retval; -} - -#ifndef MODULE -__initcall(simrs_init); -#endif diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 80c5ef8f475e..0afb3bc4b4a1 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -37,9 +37,7 @@ const char *acpi_get_sysname (void); #else static inline const char *acpi_get_sysname (void) { -# if defined (CONFIG_IA64_HP_SIM) - return "hpsim"; -# elif defined (CONFIG_IA64_HP_ZX1) +# if defined (CONFIG_IA64_HP_ZX1) return "hpzx1"; # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) return "hpzx1_swiotlb"; diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h deleted file mode 100644 index 00fbd5cc8ab8..000000000000 --- a/arch/ia64/include/asm/hpsim.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASMIA64_HPSIM_H -#define _ASMIA64_HPSIM_H - -#ifndef CONFIG_HP_SIMSERIAL_CONSOLE -static inline int simcons_register(void) { return 1; } -#else -int simcons_register(void); -#endif - -struct tty_driver; -extern struct tty_driver *hp_simserial_driver; - -extern int hpsim_get_irq(int intr); -void ia64_ctl_trace(long on); - -#endif diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h index f48556cb8afc..a91aeb413e17 100644 --- a/arch/ia64/include/asm/iosapic.h +++ b/arch/ia64/include/asm/iosapic.h @@ -52,8 +52,6 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_IOSAPIC - #define NR_IOSAPICS 256 #define iosapic_pcat_compat_init ia64_native_iosapic_pcat_compat_init @@ -103,16 +101,6 @@ extern int __init iosapic_register_platform_intr (u32 int_type, #ifdef CONFIG_NUMA extern void map_iosapic_to_node (unsigned int, int); #endif -#else -#define iosapic_system_init(pcat_compat) do { } while (0) -#define iosapic_init(address,gsi_base) (-EINVAL) -#define iosapic_remove(gsi_base) (-ENODEV) -#define iosapic_register_intr(gsi,polarity,trigger) (gsi) -#define iosapic_unregister_intr(irq) do { } while (0) -#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0) -#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \ - polarity,trigger) (gsi) -#endif # endif /* !__ASSEMBLY__ */ #endif /* __ASM_IA64_IOSAPIC_H */ diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h index f426a9829595..5a9a8af79308 100644 --- a/arch/ia64/include/asm/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -16,7 +16,6 @@ struct device; typedef void ia64_mv_setup_t (char **); -typedef void ia64_mv_irq_init_t (void); typedef void ia64_mv_dma_init (void); typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *); @@ -27,9 +26,7 @@ machvec_noop (void) extern void machvec_setup (char **); -# if defined (CONFIG_IA64_HP_SIM) -# include <asm/machvec_hpsim.h> -# elif defined (CONFIG_IA64_DIG) +# if defined (CONFIG_IA64_DIG) # include <asm/machvec_dig.h> # elif defined(CONFIG_IA64_DIG_VTD) # include <asm/machvec_dig_vtd.h> @@ -46,7 +43,6 @@ extern void machvec_setup (char **); # else # define ia64_platform_name ia64_mv.name # define platform_setup ia64_mv.setup -# define platform_irq_init ia64_mv.irq_init # define platform_dma_init ia64_mv.dma_init # define platform_dma_get_ops ia64_mv.dma_get_ops # endif @@ -59,7 +55,6 @@ extern void machvec_setup (char **); struct ia64_machine_vector { const char *name; ia64_mv_setup_t *setup; - ia64_mv_irq_init_t *irq_init; ia64_mv_dma_init *dma_init; ia64_mv_dma_get_ops *dma_get_ops; } __attribute__((__aligned__(16))); /* align attrib? see above comment */ @@ -68,7 +63,6 @@ struct ia64_machine_vector { { \ #name, \ platform_setup, \ - platform_irq_init, \ platform_dma_init, \ platform_dma_get_ops, \ } @@ -91,9 +85,6 @@ extern const struct dma_map_ops *dma_get_ops(struct device *); #ifndef platform_setup # define platform_setup machvec_setup #endif -#ifndef platform_irq_init -# define platform_irq_init machvec_noop -#endif #ifndef platform_dma_init # define platform_dma_init swiotlb_dma_init #endif diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h deleted file mode 100644 index 056f8405822e..000000000000 --- a/arch/ia64/include/asm/machvec_hpsim.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_HPSIM_h -#define _ASM_IA64_MACHVEC_HPSIM_h - -extern ia64_mv_setup_t hpsim_setup; -extern ia64_mv_irq_init_t hpsim_irq_init; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "hpsim" -#define platform_setup hpsim_setup -#define platform_irq_init hpsim_irq_init - -#endif /* _ASM_IA64_MACHVEC_HPSIM_h */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 4ba05140b249..3ada440ff893 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -12,13 +12,12 @@ extra-y := head.o vmlinux.lds obj-y := entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \ irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \ salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \ - unwind.o mca.o mca_asm.o topology.o dma-mapping.o + unwind.o mca.o mca_asm.o topology.o dma-mapping.o iosapic.o obj-$(CONFIG_ACPI) += acpi.o acpi-ext.o obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o -obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 1c81ec752b04..e3874734b149 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -53,7 +53,6 @@ #define IRQ_USED (1) #define IRQ_RSVD (2) -/* These can be overridden in platform_irq_init */ int ia64_first_device_vector = IA64_DEF_FIRST_DEVICE_VECTOR; int ia64_last_device_vector = IA64_DEF_LAST_DEVICE_VECTOR; @@ -648,7 +647,6 @@ init_IRQ (void) #ifdef CONFIG_PERFMON pfm_init_percpu(); #endif - platform_irq_init(); } void diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 4dc74500eac5..42ef03ce2fd4 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -63,7 +63,6 @@ #include <asm/smp.h> #include <asm/tlbflush.h> #include <asm/unistd.h> -#include <asm/hpsim.h> #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE) # error "struct cpuinfo_ia64 too big!" @@ -461,16 +460,11 @@ io_port_init (void) static inline int __init early_console_setup (char *cmdline) { - int earlycons = 0; - #ifdef CONFIG_EFI_PCDP if (!efi_setup_pcdp_console(cmdline)) - earlycons++; + return 0; #endif - if (!simcons_register()) - earlycons++; - - return (earlycons) ? 0 : -1; + return -1; } static inline void @@ -608,9 +602,6 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); -#ifndef CONFIG_IA64_HP_SIM - check_sal_cache_flush(); -#endif paging_init(); clear_sched_clock_stable(); |