m68knommu: remove ColdFire direct interrupt register access

Now that the ColdFire 5272 has full interrupt controller functionality
we can remove all the interrupt masking and acking code from the FEC
ethernet driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 8 insertions, 57 deletions

diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index b16add9aa4e5..59278c0887d0 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -31,11 +31,11 @@ unsigned char ledbank = 0xff;
 static struct mcf_platform_uart m5272_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{
 		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
+		.irq		= MCF_IRQ_UART2,
 	},
 	{ },
 };
@@ -53,18 +53,18 @@ static struct resource m5272_fec_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= 86,
-		.end		= 86,
+		.start		= MCF_IRQ_ERX,
+		.end		= MCF_IRQ_ERX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 87,
-		.end		= 87,
+		.start		= MCF_IRQ_ETX,
+		.end		= MCF_IRQ_ETX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 88,
-		.end		= 88,
+		.start		= MCF_IRQ_ENTC,
+		.end		= MCF_IRQ_ENTC,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -88,9 +88,6 @@ static void __init m5272_uart_init_line(int line, int irq)
 	u32 v;
 
 	if ((line >= 0) && (line < 2)) {
-		v = (line) ? 0x0e000000 : 0xe0000000;
-		writel(v, MCF_MBAR + MCFSIM_ICR2);
-
 		/* Enable the output lines for the serial ports */
 		v = readl(MCF_MBAR + MCFSIM_PBCNT);
 		v = (v & ~0x000000ff) | 0x00000055;
@@ -113,48 +110,6 @@ static void __init m5272_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m5272_fec_init(void)
-{
-	u32 imr;
-
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	imr = readl(MCF_MBAR + MCFSIM_ICR3);
-	imr = (imr & ~0x00000fff) | 0x00000ddd;
-	writel(imr, MCF_MBAR + MCFSIM_ICR3);
-
-	imr = readl(MCF_MBAR + MCFSIM_ICR1);
-	imr = (imr & ~0x0f000000) | 0x0d000000;
-	writel(imr, MCF_MBAR + MCFSIM_ICR1);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	volatile unsigned long	*icrp;
-
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	icrp[0] = 0x88888888;
-	icrp[1] = 0x88888888;
-	icrp[2] = 0x88888888;
-	icrp[3] = 0x88888888;
-}
-
-/***************************************************************************/
-
-static void __init m5272_timers_init(void)
-{
-	/* Timer1 @ level6 is always used as system timer */
-	writel((0x8 | 0x6) << ((4 - 1) * 4), MCF_MBAR + MCFSIM_ICR1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 @ level7 is to be used as a high speed profile timer  */
-	writel((0x8 | 0x7) << ((4 - 2) * 4), MCF_MBAR + MCFSIM_ICR1);
-#endif
-}
-
-/***************************************************************************/
-
 static void m5272_cpu_reset(void)
 {
 	local_irq_disable();
@@ -178,8 +133,6 @@ void __init config_BSP(char *commandp, int size)
 	*pivrp = 0x40;
 #endif
 
-	mcf_disableall();
-
 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
@@ -191,7 +144,6 @@ void __init config_BSP(char *commandp, int size)
 #endif
 
 	mach_reset = m5272_cpu_reset;
-	m5272_timers_init();
 }
 
 /***************************************************************************/
@@ -199,7 +151,6 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
-	m5272_fec_init();
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }