m68knommu: clean up ColdFire 528x interrupt setup

With the common intc-2 interrupt controller code in place the ColdFire
528x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 2 insertions, 49 deletions

diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index a1d1a61c4fe6..6e608d1836f1 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -3,8 +3,8 @@
 /*
  *	linux/arch/m68knommu/platform/528x/config.c
  *
- *	Sub-architcture dependant initialization code for the Motorola
- *	5280 and 5282 CPUs.
+ *	Sub-architcture dependant initialization code for the Freescale
+ *	5280, 5281 and 5282 CPUs.
  *
  *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
  *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
@@ -15,20 +15,13 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
 /***************************************************************************/
 
 static struct mcf_platform_uart m528x_uart_platform[] = {
@@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m528x_uart_init_line(int line, int irq)
 {
 	u8 port;
-	u32 imr;
 
 	if ((line < 0) || (line > 2))
 		return;
 
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	/* make sure PUAPAR is set for UART0 and UART1 */
 	if (line < 2) {
 		port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
@@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void)
 
 static void __init m528x_fec_init(void)
 {
-	u32 imr;
 	u16 v16;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
-	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
-	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 	v16 = readw(MCF_IPSBAR + 0x100056);
 	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
@@ -152,21 +122,6 @@ static void __init m528x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 static void m528x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -204,8 +159,6 @@ void wildfiremod_halt(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
-
 #ifdef CONFIG_WILDFIRE
 	mach_halt = wildfire_halt;
 #endif