Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

3 files changed, 55 insertions, 38 deletions

diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 24eebc5a85b1..0128bd8fa7ed 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -20,12 +20,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	palmbus: palmbus@1e000000 {
-		i2c@900 {
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -53,7 +47,7 @@
 	};
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index 34006e667780..7515555388ae 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -20,12 +20,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	palmbus: palmbus@1e000000 {
-		i2c@900 {
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -35,9 +29,45 @@
 			linux,code = <KEY_RESTART>;
 		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		ethblack-green {
+			label = "green:ethblack";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		ethblue-green {
+			label = "green:ethblue";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		ethyellow-green {
+			label = "green:ethyellow";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		ethyellow-orange {
+			label = "orange:ethyellow";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "green:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		system {
+			label = "green:system";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
@@ -83,12 +113,12 @@
 
 &gmac1 {
 	status = "okay";
-	phy-handle = <&ethphy7>;
+	phy-handle = <&ethphy5>;
 };
 
 &mdio {
-	ethphy7: ethernet-phy@7 {
-		reg = <7>;
+	ethphy5: ethernet-phy@5 {
+		reg = <5>;
 		phy-mode = "rgmii-rxid";
 	};
 };
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index ee46ace0bcc1..f3f4c1f26e01 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -33,11 +33,6 @@
 		compatible = "mti,cpu-interrupt-controller";
 	};
 
-	aliases {
-		serial0 = &uartlite;
-	};
-
-
 	mmc_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_power";
@@ -110,17 +105,16 @@
 			pinctrl-0 = <&i2c_pins>;
 		};
 
-		memc: syscon@5000 {
+		memc: memory-controller@5000 {
 			compatible = "mediatek,mt7621-memc", "syscon";
 			reg = <0x5000 0x1000>;
 		};
 
-		uartlite: uartlite@c00 {
+		serial0: serial@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
 			clocks = <&sysc MT7621_CLK_UART1>;
-			clock-names = "uart1";
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +230,7 @@
 		};
 	};
 
-	sdhci: sdhci@1e130000 {
+	mmc: mmc@1e130000 {
 		status = "disabled";
 
 		compatible = "mediatek,mt7620-mmc";
@@ -262,8 +256,8 @@
 		interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	xhci: xhci@1e1c0000 {
-		compatible = "mediatek,mt8173-xhci";
+	usb: usb@1e1c0000 {
+		compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
 		reg = <0x1e1c0000 0x1000
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
@@ -338,23 +332,22 @@
 		gmac1: mac@1 {
 			compatible = "mediatek,eth-mac";
 			reg = <1>;
-			status = "off";
-			phy-mode = "rgmii-rxid";
+			status = "disabled";
+			phy-mode = "rgmii";
 		};
 
 		mdio: mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: switch@1f {
 				compatible = "mediatek,mt7621";
-				reg = <0>;
+				reg = <0x1f>;
 				mediatek,mcm;
 				resets = <&sysc MT7621_RST_MCM>;
 				reset-names = "mcm";
 				interrupt-controller;
 				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
 				ports {
@@ -362,31 +355,31 @@
 					#size-cells = <0>;
 
 					port@0 {
-						status = "off";
+						status = "disabled";
 						reg = <0>;
 						label = "lan0";
 					};
 
 					port@1 {
-						status = "off";
+						status = "disabled";
 						reg = <1>;
 						label = "lan1";
 					};
 
 					port@2 {
-						status = "off";
+						status = "disabled";
 						reg = <2>;
 						label = "lan2";
 					};
 
 					port@3 {
-						status = "off";
+						status = "disabled";
 						reg = <3>;
 						label = "lan3";
 					};
 
 					port@4 {
-						status = "off";
+						status = "disabled";
 						reg = <4>;
 						label = "lan4";
 					};