Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

33 files changed, 1822 insertions, 97 deletions

diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index acb1988f354e..2728a9a9c7c5 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -100,3 +100,69 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
 $(obj)/uImage: $(obj)/uImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 	@echo '  Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+ifeq ($(ADDR_BITS),32)
+	itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+	itb_addr_cells = 2
+endif
+
+quiet_cmd_cpp_its_S = ITS     $@
+      cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+		        -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+			-DVMLINUX_BINARY="\"$(3)\"" \
+			-DVMLINUX_COMPRESSION="\"$(2)\"" \
+			-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+			-DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+			-DADDR_BITS=$(ADDR_BITS) \
+			-DADDR_CELLS=$(itb_addr_cells)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB     $@
+      cmd_itb-image = \
+		env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+		$(CONFIG_SHELL) $(MKIMAGE) \
+		-D "-I dts -O dtb -p 500 \
+			--include $(objtree)/arch/mips \
+			--warning no-unit_address_vs_reg" \
+		-f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+	$(call if_changed,itb-image,$<)
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
index fda9d387cc08..d61bc2aebf69 100644
--- a/arch/mips/boot/dts/brcm/Makefile
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -1,6 +1,5 @@
 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
-dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -11,20 +10,29 @@ dtb-$(CONFIG_DT_BCM97362SVMB)		+= bcm97362svmb.dtb
 dtb-$(CONFIG_DT_BCM97420C)		+= bcm97420c.dtb
 dtb-$(CONFIG_DT_BCM97425SVMB)		+= bcm97425svmb.dtb
 dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U)	+= bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G)	+= bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM)	+= bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM)	+= bcm6362-neufbox6-sercomm.dtb
 
-dtb-$(CONFIG_DT_NONE)			+= \
-						bcm93384wvg.dtb		\
-						bcm93384wvg_viper.dtb	\
-						bcm96358nb4ser.dtb	\
-						bcm96368mvwg.dtb	\
-						bcm9ejtagprb.dtb	\
-						bcm97125cbmb.dtb	\
-						bcm97346dbsmb.dtb	\
-						bcm97358svmb.dtb	\
-						bcm97360svmb.dtb	\
-						bcm97362svmb.dtb	\
-						bcm97420c.dtb		\
-						bcm97425svmb.dtb
+dtb-$(CONFIG_DT_NONE) += \
+	bcm3368-netgear-cvg834g.dtb \
+	bcm6358-neufbox4-sercomm.dtb \
+	bcm6362-neufbox6-sercomm.dtb \
+	bcm63268-comtrend-vr-3032u.dtb \
+	bcm93384wvg.dtb \
+	bcm93384wvg_viper.dtb \
+	bcm96358nb4ser.dtb \
+	bcm96368mvwg.dtb \
+	bcm9ejtagprb.dtb \
+	bcm97125cbmb.dtb \
+	bcm97346dbsmb.dtb \
+	bcm97358svmb.dtb \
+	bcm97360svmb.dtb \
+	bcm97362svmb.dtb \
+	bcm97420c.dtb \
+	bcm97425svmb.dtb \
+	bcm97435svmb.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 000000000000..2f2e80fdcde8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+	compatible = "netgear,cvg834g", "brcm,bcm3368";
+	model = "NETGEAR CVG834G";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
new file mode 100644
index 000000000000..bee855cb8073
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -0,0 +1,101 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fff8c000 {
+			compatible = "syscon";
+			reg = <0xfff8c000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fff8c008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fff8c00c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfff8c00c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 000000000000..430d35ca33d5
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+	model = "Comtrend VR-3032u";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	led@0 {
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+		/* GPHY0 Speed 0 */
+	};
+	led@1 {
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+		/* GPHY0 Speed 1 */
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "vr-3032u:red:inet";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "vr-3032u:green:dsl";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "vr-3032u:green:usb";
+	};
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "vr-3032u:green:wps";
+	};
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "vr-3032u:green:inet";
+	};
+	led@9 {
+		reg = <9>;
+		brcm,hardware-controlled;
+		/* EPHY0 Activity */
+	};
+	led@10 {
+		reg = <10>;
+		brcm,hardware-controlled;
+		/* EPHY1 Activity */
+	};
+	led@11 {
+		reg = <11>;
+		brcm,hardware-controlled;
+		/* EPHY2 Activity */
+	};
+	led@12 {
+		reg = <12>;
+		brcm,hardware-controlled;
+		/* GPHY0 Activity */
+	};
+	led@13 {
+		reg = <13>;
+		brcm,hardware-controlled;
+		/* EPHY0 Speed */
+	};
+	led@14 {
+		reg = <14>;
+		brcm,hardware-controlled;
+		/* EPHY1 Speed */
+	};
+	led@15 {
+		reg = <15>;
+		brcm,hardware-controlled;
+		/* EPHY2 Speed */
+	};
+	led@20 {
+		reg = <20>;
+		active-low;
+		label = "vr-3032u:green:power";
+		default-state = "on";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
new file mode 100644
index 000000000000..7e6bf2cc0287
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
index f412117972e6..702eae2a22a0 100644
--- a/arch/mips/boot/dts/brcm/bcm96358nb4ser.dts
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -12,6 +12,7 @@
 	};
 
 	chosen {
+		bootargs = "console=ttyS0,115200";
 		stdout-path = &uart0;
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 000000000000..480f2a5bf1da
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+	compatible = "sfr,nb6-ser", "brcm,bcm6362";
+	model = "SFR NeufBox 6 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 000000000000..c507da594f2f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,134 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 550e1d9e3ee0..bbd00f65ce39 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -183,6 +189,26 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index ec959061d52e..4bbcc95f1c15 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "jtag_0", "svd_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -210,6 +216,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -313,6 +372,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -352,5 +431,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@413500 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x413500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <85>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index ca57fb5eb122..3e42535c8d29 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406700 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406700 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -239,5 +298,25 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 1c0c3d438c7a..112a5571c596 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -20,7 +20,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -240,6 +291,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -279,5 +350,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6b4713add4b8..34abfb0b07e7 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -96,7 +102,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -190,6 +196,51 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -236,6 +287,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -275,5 +346,13 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 0586bf662571..b143723c674e 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -82,7 +88,7 @@
 						     "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -191,6 +197,34 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406880 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406880 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index c1c15edaf829..2488d2f61f60 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -26,7 +26,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41a400 {
+		periph_intc: interrupt-controller@41a400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41a400 0x30>, <0x41a600 0x30>;
 
@@ -60,7 +66,7 @@
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -83,7 +89,7 @@
 						     "vice_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -98,7 +104,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -209,6 +215,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -312,6 +371,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41a000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41a000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41b800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x41b800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -351,5 +430,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@419000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <43>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@419200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <44>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index a874d3a0e2ee..19fa259b968b 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -38,7 +38,7 @@
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -52,6 +52,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -61,7 +67,7 @@
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41b500 {
+		periph_intc: interrupt-controller@41b500 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41b500 0x40>, <0x41b600 0x40>,
 				<0x41b700 0x40>, <0x41b800 0x40>;
@@ -73,7 +79,7 @@
 			interrupts = <2>, <3>, <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -98,7 +104,7 @@
 						     "scpu";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -113,7 +119,7 @@
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -224,6 +230,59 @@
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -327,6 +386,26 @@
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41b000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41b000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41c800 {
+			compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-dma";
+			reg = <0x41c800 0x600>, <0x41d000 0x100>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>, <4>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -366,5 +445,25 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@41a000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@41a200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
index f2449d147c6d..5c24eacd72dd 100644
--- a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index d3d28816a027..e67eaf30de3d 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
@@ -49,6 +50,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -85,6 +94,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -92,3 +105,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index 02ce6b429dc4..ee4607fae47a 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
@@ -45,6 +46,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -56,3 +65,7 @@
 &ohci0 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index 73124be9548a..bed821b03013 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +68,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 3cfcaebe7f79..68fd823868e0 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
@@ -41,6 +42,10 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -53,6 +58,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -60,3 +69,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
index 600d57abee05..e66271af055e 100644
--- a/arch/mips/boot/dts/brcm/bcm97420c.dts
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -51,6 +51,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
index 119c714805cb..f95ba1bf3e58 100644
--- a/arch/mips/boot/dts/brcm/bcm97425svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -86,3 +95,15 @@
 &ohci3 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
index 43e3ba27f07b..fb37b7111bf4 100644
--- a/arch/mips/boot/dts/brcm/bcm97435svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
@@ -51,6 +52,14 @@
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -87,6 +96,10 @@
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -94,3 +107,11 @@
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 000000000000..3c24f97de922
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+		brcm,nand-oob-sector-size = <27>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 000000000000..cb531816ef4c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,25 @@
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index b134798a0fd7..cfa29156eb69 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -8,55 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "dlink,dsr-1000n";
 
 	soc@0 {
-		smi0: mdio@1180000001800 {
-			phy8: ethernet-phy@8 {
-				reg = <8>;
-				compatible = "ethernet-phy-ieee802.3-c22";
-			};
-		};
-
-		pip: pip@11800a0000000 {
-			interface@0 {
-				ethernet@0 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@1 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@2 {
-					phy-handle = <&phy8>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
 		uart0: serial@1180000000800 {
 			clock-frequency = <500000000>;
 		};
-
-		usbn: usbn@1180068000000 {
-			refclk-frequency = <12000000>;
-			refclk-type = "crystal";
-		};
 	};
 
 	leds {
@@ -87,8 +48,4 @@
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	aliases {
-		pip = &pip;
-	};
 };
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 000000000000..246b598201f8
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 000000000000..78886e172c48
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,40 @@
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-500n";
+	compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <300000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
index 144d776cc9f2..fcabd69b7030 100644
--- a/arch/mips/boot/dts/mti/Makefile
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -1,5 +1,5 @@
 dtb-$(CONFIG_MIPS_MALTA)	+= malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3)	+= sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3)	+= sead3.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index b18c46637d21..f604a272d91d 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -1,5 +1,8 @@
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 /memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
 /memreserve/ 0x00001000 0x000ef000;	/* YAMON */
 /memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
@@ -8,4 +11,100 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,malta";
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	i8259: interrupt-controller@20 {
+		compatible = "intel,i8259";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	flash@1e000000 {
+		compatible = "intel,dt28f160", "cfi-flash";
+		reg = <0x1e000000 0x400000>;
+		bank-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			yamon@0 {
+				label = "YAMON";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			user-fs@100000 {
+				label = "User FS";
+				reg = <0x100000 0x2e0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x3e0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x4d>;
+		};
+	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
 };
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
index e4b317d414f1..b112879a5d9d 100644
--- a/arch/mips/boot/dts/mti/sead3.dts
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -4,10 +4,23 @@
 /memreserve/ 0x00001000 0x000ef000;	// ROM data
 /memreserve/ 0x000f0000 0x004cc000;	// reserved
 
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,sead-3";
+	model = "MIPS SEAD-3";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = "uart1:115200";
+	};
+
+	aliases {
+		uart0 = &uart0;
+		uart1 = &uart1;
+	};
 
 	cpus {
 		cpu@0 {
@@ -19,4 +32,229 @@
 		device_type = "memory";
 		reg = <0x0 0x08000000>;
 	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1b1c0000 {
+		compatible = "mti,gic";
+		reg = <0x1b1c0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	ehci@1b200000 {
+		compatible = "generic-ehci";
+		reg = <0x1b200000 0x1000>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		has-transaction-translator;
+	};
+
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x200>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x50>;
+			mask = <0x4d>;
+		};
+
+		poweroff {
+			compatible = "restart-poweroff";
+		};
+	};
+
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+
+		lcd@200 {
+			compatible = "mti,sead3-lcd";
+			offset = <0x200>;
+		};
+	};
+
+	/* UART connected to FTDI & miniUSB socket */
+	uart0: uart@1f000900 {
+		compatible = "ns16550a";
+		reg = <0x1f000900 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <3>; /* GIC 3 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	/* UART connected to RS232 socket */
+	uart1: uart@1f000800 {
+		compatible = "ns16550a";
+		reg = <0x1f000800 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <2>; /* GIC 2 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	eth@1f010000 {
+		compatible = "smsc,lan9115";
+		reg = <0x1f010000 0x10000>;
+		reg-io-width = <4>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+	};
 };