Merge branch 'linus' into x86/dma, to resolve a conflict with upstream

Conflicts:
	arch/x86/mm/init_64.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

4 files changed, 27 insertions, 30 deletions

diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 692ae85a3e3d..8e3a1fc2bc39 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -13,6 +13,8 @@ choice
 config SOC_AMAZON_SE
 	bool "Amazon SE"
 	select SOC_TYPE_XWAY
+	select MFD_SYSCON
+	select MFD_CORE
 
 config SOC_XWAY
 	bool "XWAY"
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 52500d3b7004..e0af39b33e28 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -549,9 +549,9 @@ void __init ltq_soc_init(void)
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz(), CLOCK_250M);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
-		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
-		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
 		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
@@ -560,7 +560,7 @@ void __init ltq_soc_init(void)
 	} else {
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
 				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
-		clkdev_add_pmu("1f203018.usb2-phy", "ctrl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index 1b274742077d..d2718de60b9b 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -170,6 +170,28 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	u32 n1;
 	u32 rev;
 
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cps_numiocu(0)) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+		__sync();
+	}
+
 	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
 	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
 
@@ -194,26 +216,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	rt2880_pinmux_data = mt7621_pinmux_data;
 
-	/* Early detection of CMP support */
-	mips_cm_probe();
-	mips_cpc_probe();
-
-	if (mips_cps_numiocu(0)) {
-		/*
-		 * mips_cm_probe() wipes out bootloader
-		 * config for CM regions and we have to configure them
-		 * again. This SoC cannot talk to pamlbus devices
-		 * witout proper iocu region set up.
-		 *
-		 * FIXME: it would be better to do this with values
-		 * from DT, but we need this very early because
-		 * without this we cannot talk to pretty much anything
-		 * including serial.
-		 */
-		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
-		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
-				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
-	}
 
 	if (!register_cps_smp_ops())
 		return;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 64543d66e76b..e9531fea23a2 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -96,16 +96,9 @@ static void ralink_restart(char *command)
 	unreachable();
 }
 
-static void ralink_halt(void)
-{
-	local_irq_disable();
-	unreachable();
-}
-
 static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
-	_machine_halt = ralink_halt;
 
 	return 0;
 }